I tried to flash the new update with odin but i wont flash i get stuck at
<ID:0/003> Added!! <ID:0/003> Odin v.3 engine (ID:3).. <ID:0/003> File analysis.. <ID:0/003> SetupConnection.. <ID:0/003> Initialzation...
can anyone help when i try to boot back up i get the phone and computer i can get into download mode but can not flash anything.
Can anyone help me
Robert8457 said:
Can anyone help me
Click to expand...
Click to collapse
whats steps did u take?
It worked great for me. Did you unzip everything to the same folder?
froze on you, just start over
badaphooko01 said:
whats steps did u take?
It worked great for me. Did you unzip everything to the same folder?
Click to expand...
Click to collapse
i put them on the destop and used odin but it gets stuck on ID:0/003> Initialzation...
the only way i can get into download mode is by volume down and power then plug it into the computer.
Perhaps you can try just shut down Odin and restart it and make sure you have the pit and the tar loaded in Odin before you connect your phone and go into download mode. I tried to flash the j16 leak a while back and it kept hanging up and I got the same screen that you have I just started everything over again and it worked. Did you click repartition?. I was told not to.
tenbeau said:
Perhaps you can try just shut down Odin and restart it and make sure you have the pit and the tar loaded in Odin before you connect your phone and go into download mode. I tried to flash the j16 leak a while back and it kept hanging up and I got the same screen that you have I just started everything over again and it worked. Did you click repartition?. I was told not to.
Click to expand...
Click to collapse
it did that could it be the drivers i am running vista 32bit
<ID:0/004> Added!! <ID:0/004> Odin v.3 engine (ID:4).. <ID:0/004> File analysis.. <ID:0/004> SetupConnection..
this is waht i get now
Mee too.
Windows XP :/
I dont no if it will help, but when i was having issues getting it to pass the set up/ Initialzation try to reboot the system then do odin before you do anything else on the computer, that worked for me. hope that helps.
Related
I don't know where I failed. I got into download mode, selected the tar for the JL5 T-Mobile leak, and now I'm bricked.
Sorry to be another idiot, but I could really use some help? I just got my vibrant today.
Here's the error:
ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.rfs
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just to add more info...
I'm coming from stock and this is my first flash via ODIN. All I wanted was to go to Froyo via the leaked JL5 build.
Just to clarify, do I select the .tar via PDA or Phone?
I can get back into Download Mode, no problem. I just can't get ODIN to flash the .tar of the JL5 leak. What have I done wrong?
I tried restarting the computer, etc.
Just kept trying and it eventually worked.
Sorry for the panic.
So can you boot up at all or only into download mode
Sent from my SGH-T959 using XDA App
No, I could only boot into download mode. I just kept restarting and reconnecting, and eventually, it worked. No problems.
I had the drivers installed, so ODIN recognized the COM right away. It just failed on the first flash, and since it was my first day with the new phone (and my wife was sitting next to me) I started to panic a bit.
OK If it is failing and you can still reboot into the old rom?
It really looks like a bad download. Delete the JL5 and download again
IF you can boot ok to 2.1, then load the tar file in PDA no pit file necessary, and do not check repartition
If you cannot boot up anymore. Look in development or in the bible the shipping rom
Odin the shipping rom, load the pit file, load the tar in PDA and check repartition.
After that is fine and boots, you can try with the new downloaded jl5
I have a problem, i was attempting to odin back to stock and when i set up odin with the correct pit file aw well as the PDA file. When i click start on the odin window were it says message it says
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
and it stays there nothings happens, the phone doesn't boot but i could enter download mode. I tried multiple times checking re-partion and without, but no luck...
Any help????
try a different odin version?
xriderx66 said:
try a different odin version?
Click to expand...
Click to collapse
I did try different versions but the same thing happens.
Depending on which version of Windows you're using, you might try to "Run as Administrator"
Sent from my SGH-T959 using XDA Premium App
I tried a different USB port and it worked!!
It was a weird situation idk why it would matter but it did. Anyways thanks for the suggestions =]
Hello,
I've pretty much exhausted all my brainpower trying to figure this one out. I have an I9305 S3 which I am trying to root, I have all the correct drivers installed and Odin v3 shows blue COM4 ID box. When flashing anything, I get this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
Click to expand...
Click to collapse
Then it gets stuck and does nothing. I tried to flash CWM recovery first, and it would say this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
Click to expand...
Click to collapse
So it appears it tries to flash boot.img or recovery.img but gets stuck. Unplugging the phone and rebooting shows everything to be working and still stock, in other words nothing really happens.
Tried several methods, both using Odin3 v1.87 and v3.07 directly, and via the Galaxy S3 Toolkit, also tried flashing various packages in the S3 Toolkit as well as pre-rooted firmware, all with the same result. Tried uninstalling all Samsung drivers and then installing via the Toolkit. Never installed Kies before but I tried installing Kies and letting it install drivers, then using Odin, still same result. Can anyone help?
DkNINJA said:
Hello,
I've pretty much exhausted all my brainpower trying to figure this one out. I have an I9305 S3 which I am trying to root, I have all the correct drivers installed and Odin v3 shows blue COM4 ID box. When flashing anything, I get this:
Then it gets stuck and does nothing. I tried to flash CWM recovery first, and it would say this:
So it appears it tries to flash boot.img or recovery.img but gets stuck. Unplugging the phone and rebooting shows everything to be working and still stock, in other words nothing really happens.
Tried several methods, both using Odin3 v1.87 and v3.07 directly, and via the Galaxy S3 Toolkit, also tried flashing various packages in the S3 Toolkit as well as pre-rooted firmware, all with the same result. Tried uninstalling all Samsung drivers and then installing via the Toolkit. Never installed Kies before but I tried installing Kies and letting it install drivers, then using Odin, still same result. Can anyone help?
Click to expand...
Click to collapse
try to flash use mobile odin by chainfire
this more safety way
hrcell said:
try to flash use mobile odin by chainfire
this more safety way
Click to expand...
Click to collapse
I can't since I can't get root on my phone.
Just fixed it. After all this time it appears to be a USB port / driver issue. I had a Galaxy S3 I9300 previously and I think there were some conflicts, I switched to a new USB port and everything finished without an issue. Interesting side note, I suspected the problem because when I plugged in the I9305 and tried to copy files to the phone, it gets stuck for any files over a couple of MB in size. I plugged in my old S3 (I9300) and there were no problems. Changing the I9305 to a new port fixed everything.
Guys help..
I was trying to get my phone back to basic and I tried to install an official firmware by using odin 3, and it failed..
Now I am stucked???
My phone failed and know its saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again"
What to to??
what does the log say?
Glebun said:
what does the log say?
Click to expand...
Click to collapse
log???
yes, the Odin log.
Sivasli_ said:
Guys help..
I was trying to get my phone back to basic and I tried to install an official firmware by using odin 3, and it failed..
Now I am stucked???
My phone failed and know its saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again"
What to to??
Click to expand...
Click to collapse
Before flashing, make sure you have all necessary drivers installed and that you have more than 50% (30% is the absolute minimum) of battery left. Then download a ROM (I.e. from sammobile.com/firmware) and make sure that is is the right ROM for your device. If you download something that is for a different device, you may end up bricking it.
Then boot your phone into Odin mode (I think you know how to do that?) and connect the phone to your PC. Wait for the PC to recognize the device as a serial CDC (That's what Windows 7 and Vista usually show) and then wait for Odin to recognize the device. Then (If you have not already) load all the files into Odin (PDA - ROM and kernel, Modem - Phone, CSC - CSC) and hit "Start".
Then it should download fine. If you are still having trouble, feel free to PM me and I'll gladly help via TeamViewer
Lg
Sound to me like Kies was running in the background while you made the Odin flash.....you must disable Kies before using Odin
No Kies was not running in the backgorund..
Could it be, because I was going from 4.1.2 down to 4.0.1 for example? It is a old firmware..
I solved my problem with installing an Omega Rom v43, but I still want to back to original firmware..
what does the log say?
I dont now how to look at the log..
Can I just flash the original firmware even that I am on a Omega firmware?
Glebun said:
what does the log say?
Click to expand...
Click to collapse
Here is what the log says..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
Sivasli_ said:
No Kies was not running in the backgorund..
Could it be, because I was going from 4.1.2 down to 4.0.1 for example? It is a old firmware..
I solved my problem with installing an Omega Rom v43, but I still want to back to original firmware..
Click to expand...
Click to collapse
The new 4.1.2 bootloader (I assume you have it, unless you specifically replaced it with the older one) will blacklist older bootloaders and prevent them from being installed. This might be part of the problem.
Good days to everyone!
I've got a situation with my GT-N7100. It doesn't seem to get past the first logo during boot-up, ever.
I've tried the newest MD5 version for that model. "N7100UBUEND1_N7100TCEEND1_N7100UBUEND1_HOME.tar.m d5"
Used the PIT file to Re-Partition and several versions of Odin.
With the PIT file, only version V3.07 hangs at, "Get PIT for mapping..", all other versions seem to fail.
Pit File used: Q1_20110914_16GB.pit
Without the file I get: (Using the tar.md5 packet with V3.07 Odin)
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
Odin V3.09
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
The phone will not go into recovery mode, the only thing I can get it to do is enter download mode.
How this started? Holding the phone, looking at it. It reset itself and never came back.
I disabled my Anti-Virus... Not sure what else to try. Thank you very much in advance!
***UPDATE*** (I was able to enter recovery mode but it seems to fail to mount anything.)
***UPDATE*** (At wits end, not sure what else to try. I'm thinking the NAND has become corrupt and or unrecoverable. Or unless there was a way to, similar to PC's, do a chkdsk repair. At this time i'm downloading the toolkit and attempt anything through ADB, I feel there is nothing more I could do to Un-Brick the phone. I read about Soft/hard Brick, the phone seems to be Soft Bricked but nothing is allowing me to repair/recover through any download method. Booting into recovery fails to mount everything [as seen in pics].)
Darkie0000 said:
Good days to everyone!
I've got a situation with my GT-N7100. It doesn't seem to get past the first logo during boot-up, ever.
I've tried the newest MD5 version for that model. "N7100UBUEND1_N7100TCEEND1_N7100UBUEND1_HOME.tar.m d5"
Used the PIT file to Re-Partition and several versions of Odin.
With the PIT file, only version V3.07 hangs at, "Get PIT for mapping..", all other versions seem to fail.
Pit File used: Q1_20110914_16GB.pit
Without the file I get: (Using the tar.md5 packet with V3.07 Odin)
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
Odin V3.09
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
The phone will not go into recovery mode, the only thing I can get it to do is enter download mode.
How this started? Holding the phone, looking at it. It reset itself and never came back.
I disabled my Anti-Virus... Not sure what else to try. Thank you very much in advance!
***UPDATE*** (I was able to enter recovery mode but it seems to fail to mount anything.)
***UPDATE*** (At wits end, not sure what else to try. I'm thinking the NAND has become corrupt and or unrecoverable. Or unless there was a way to, similar to PC's, do a chkdsk repair. At this time i'm downloading the toolkit and attempt anything through ADB, I feel there is nothing more I could do to Un-Brick the phone. I read about Soft/hard Brick, the phone seems to be Soft Bricked but nothing is allowing me to repair/recover through any download method. Booting into recovery fails to mount everything [as seen in pics].)
Click to expand...
Click to collapse
I'd try to install a custom recovery and use that to install new software to see if you can get booted. If the custom recovery can't mount anything, then that might tell us more about what's going on.
es0tericcha0s said:
I'd try to install a custom recovery and use that to install new software to see if you can get booted. If the custom recovery can't mount anything, then that might tell us more about what's going on.
Click to expand...
Click to collapse
Thanks for your response! I am not sure where to find a custom recovery or how I would apply that to the phone. Debugging isnt enabled and I cannot enable it as its stuck in boot. Over half of the features wont work in ADB mode, due to debugging not enabled.
Darkie0000 said:
Thanks for your response! I am not sure where to find a custom recovery or how I would apply that to the phone. Debugging isnt enabled and I cannot enable it as its stuck in boot. Over half of the features wont work in ADB mode, due to debugging not enabled.
Click to expand...
Click to collapse
Just have to get to Download Mode and use Odin to install the custom recovery. Has nothing to do with USB Debugging.
http://forum.xda-developers.com/showpost.php?p=55198275&postcount=2
es0tericcha0s said:
Just have to get to Download Mode and use Odin to install the custom recovery. Has nothing to do with USB Debugging.
http://forum.xda-developers.com/showpost.php?p=55198275&postcount=2
Click to expand...
Click to collapse
I'm still not exactly sure where to get this custom ROM you mention.
I tried another recovery, Note2-CWM-6.0.4.3-GT-N7100. It goes about %75 rather quickly and fails.
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Darkie0000 said:
I'm still not exactly sure where to get this custom ROM you mention.
I tried another recovery, Note2-CWM-6.0.4.3-GT-N7100. It goes about %75 rather quickly and fails.
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Sounds like you might have messed it up from flashing that older Pit file, which might have been Gingerbread or early ICS, being that it's from 2011...
You realize that there is a whole sub forum here devoted to your phone, right? It seems like you haven't tried to do much research here.