Hello,
I've pretty much exhausted all my brainpower trying to figure this one out. I have an I9305 S3 which I am trying to root, I have all the correct drivers installed and Odin v3 shows blue COM4 ID box. When flashing anything, I get this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
Click to expand...
Click to collapse
Then it gets stuck and does nothing. I tried to flash CWM recovery first, and it would say this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
Click to expand...
Click to collapse
So it appears it tries to flash boot.img or recovery.img but gets stuck. Unplugging the phone and rebooting shows everything to be working and still stock, in other words nothing really happens.
Tried several methods, both using Odin3 v1.87 and v3.07 directly, and via the Galaxy S3 Toolkit, also tried flashing various packages in the S3 Toolkit as well as pre-rooted firmware, all with the same result. Tried uninstalling all Samsung drivers and then installing via the Toolkit. Never installed Kies before but I tried installing Kies and letting it install drivers, then using Odin, still same result. Can anyone help?
DkNINJA said:
Hello,
I've pretty much exhausted all my brainpower trying to figure this one out. I have an I9305 S3 which I am trying to root, I have all the correct drivers installed and Odin v3 shows blue COM4 ID box. When flashing anything, I get this:
Then it gets stuck and does nothing. I tried to flash CWM recovery first, and it would say this:
So it appears it tries to flash boot.img or recovery.img but gets stuck. Unplugging the phone and rebooting shows everything to be working and still stock, in other words nothing really happens.
Tried several methods, both using Odin3 v1.87 and v3.07 directly, and via the Galaxy S3 Toolkit, also tried flashing various packages in the S3 Toolkit as well as pre-rooted firmware, all with the same result. Tried uninstalling all Samsung drivers and then installing via the Toolkit. Never installed Kies before but I tried installing Kies and letting it install drivers, then using Odin, still same result. Can anyone help?
Click to expand...
Click to collapse
try to flash use mobile odin by chainfire
this more safety way
hrcell said:
try to flash use mobile odin by chainfire
this more safety way
Click to expand...
Click to collapse
I can't since I can't get root on my phone.
Just fixed it. After all this time it appears to be a USB port / driver issue. I had a Galaxy S3 I9300 previously and I think there were some conflicts, I switched to a new USB port and everything finished without an issue. Interesting side note, I suspected the problem because when I plugged in the I9305 and tried to copy files to the phone, it gets stuck for any files over a couple of MB in size. I plugged in my old S3 (I9300) and there were no problems. Changing the I9305 to a new port fixed everything.
Related
I tried to flash the new update with odin but i wont flash i get stuck at
<ID:0/003> Added!! <ID:0/003> Odin v.3 engine (ID:3).. <ID:0/003> File analysis.. <ID:0/003> SetupConnection.. <ID:0/003> Initialzation...
can anyone help when i try to boot back up i get the phone and computer i can get into download mode but can not flash anything.
Can anyone help me
Robert8457 said:
Can anyone help me
Click to expand...
Click to collapse
whats steps did u take?
It worked great for me. Did you unzip everything to the same folder?
froze on you, just start over
badaphooko01 said:
whats steps did u take?
It worked great for me. Did you unzip everything to the same folder?
Click to expand...
Click to collapse
i put them on the destop and used odin but it gets stuck on ID:0/003> Initialzation...
the only way i can get into download mode is by volume down and power then plug it into the computer.
Perhaps you can try just shut down Odin and restart it and make sure you have the pit and the tar loaded in Odin before you connect your phone and go into download mode. I tried to flash the j16 leak a while back and it kept hanging up and I got the same screen that you have I just started everything over again and it worked. Did you click repartition?. I was told not to.
tenbeau said:
Perhaps you can try just shut down Odin and restart it and make sure you have the pit and the tar loaded in Odin before you connect your phone and go into download mode. I tried to flash the j16 leak a while back and it kept hanging up and I got the same screen that you have I just started everything over again and it worked. Did you click repartition?. I was told not to.
Click to expand...
Click to collapse
it did that could it be the drivers i am running vista 32bit
<ID:0/004> Added!! <ID:0/004> Odin v.3 engine (ID:4).. <ID:0/004> File analysis.. <ID:0/004> SetupConnection..
this is waht i get now
Mee too.
Windows XP :/
I dont no if it will help, but when i was having issues getting it to pass the set up/ Initialzation try to reboot the system then do odin before you do anything else on the computer, that worked for me. hope that helps.
Big problem...
After flashing 9.3 on SGS2 without wiping i rebooted in cwm and flashed siyah 2.6.2.
After that the phone stuck on the omega logo and did not boot.
I rebooted into CWM wiped cache/davlic etc and i tryed to reflash the 9.3 and the siyah.
After that i tryed to flash the kernel but the phone restarted itself and since then it doesnt boot at all neither in CWM or into android.
Only in download mode and it's not recognized by ODIN or kies.
ODIN:
ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!
Kies: The device is not responding.
BUT windows is recognizing the phone in devices.
What should i do?
IF i try to turn it on it appears a phone-triangle-pc logo and nothing happens after that.
angelossssss said:
Big problem...
After flashing 9.3 on SGS2 without wiping i rebooted in cwm and flashed siyah 2.6.2.
After that the phone stuck on the omega logo and did not boot.
I rebooted into CWM wiped cache/davlic etc and i tryed to reflash the 9.3 and the siyah.
After that i tryed to flash the kernel but the phone restarted itself and since then it doesnt boot at all neither in CWM or into android.
Only in download mode and it's not recognized by ODIN or kies.
ODIN:
ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!
Kies: The device is not responding.
BUT windows is recognizing the phone in devices.
What should i do?
IF i try to turn it on it appears a phone-triangle-pc logo and nothing happens after that.
Click to expand...
Click to collapse
1) Get the right CF Kernel from the Chainfire kernel thread in the Android Original Development Thread. Extract the zip to get a TAR and extract the TAR to get a z-image file. Also download the corresponding original stock kernel from the Intratech thread in the same section.
2) Flash the TAR in PDA using Odin. Do not click repartition. This lets you boot with with functional Root and CWM.
3) If you want to get rid of the yellow triangle, then load the z-image file into /sdcard. Reboot into download mode and use Odin to flash the stock kernel (again in the PDA without repartition). After that, go to the CWM app, choose flash kernel and locate the zimage and proceed.
NB: You can read Chainfire and Intratechs threads in case I was vague somewhere.
Thanks mate but i already know and did all these.
The thing is what i do in order to bring my phone back to life.
What is 9.3 you flashed ???
Kies: The device is not responding.
Why are you using KIES to flash a rom is it open and preventing Odin from working .
jje
Are you saying Odin does it doesn't recognise your phone?
In the past Odin flashing has gone wrong and can usually be fixed by a PC reboot or rebooting into download mode again.
Sent from my GT-I9100
9.3 = Omega 9.3 rom.
No i'm not.
I installed kies to see if the phone is recognized. After i realized that it's not i uninstalled the kies.
The thing is that odin sees my phone but stacks at <ID:0/003> NAND Write Start!
With 115 posts no reason for you not to ask in the rom thread as its possible its rom specific .
Dont think it is but worth a try .
Choices try Odin on another PC .
Take phone to service centre and hope it is not an expensive repair .
Buy a JTag machine .
jje
Just tryed odin on another pc and i got the same result...
i had the same problem and tried flashing the PIT thinking it might do something, but ended up fully bricked. couldnt power on anymore. only way is to JTAG it now, if odin cant flash it.
read this thread maybe it can help
http://forum.xda-developers.com/showthread.php?t=1382838&highlight=unbrick
angelossssss said:
9.3 = Omega 9.3 rom.
No i'm not.
I installed kies to see if the phone is recognized. After i realized that it's not i uninstalled the kies.
The thing is that odin sees my phone but stacks at <ID:0/003> NAND Write Start!
Click to expand...
Click to collapse
Were you flashing using Odin without Kies installed? As far as i'm aware Kies must be installed but not running to flash with Odin.
Nothing worked
The phone is off to Samsung service.
Thanks for your help people.
Guys help..
I was trying to get my phone back to basic and I tried to install an official firmware by using odin 3, and it failed..
Now I am stucked???
My phone failed and know its saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again"
What to to??
what does the log say?
Glebun said:
what does the log say?
Click to expand...
Click to collapse
log???
yes, the Odin log.
Sivasli_ said:
Guys help..
I was trying to get my phone back to basic and I tried to install an official firmware by using odin 3, and it failed..
Now I am stucked???
My phone failed and know its saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again"
What to to??
Click to expand...
Click to collapse
Before flashing, make sure you have all necessary drivers installed and that you have more than 50% (30% is the absolute minimum) of battery left. Then download a ROM (I.e. from sammobile.com/firmware) and make sure that is is the right ROM for your device. If you download something that is for a different device, you may end up bricking it.
Then boot your phone into Odin mode (I think you know how to do that?) and connect the phone to your PC. Wait for the PC to recognize the device as a serial CDC (That's what Windows 7 and Vista usually show) and then wait for Odin to recognize the device. Then (If you have not already) load all the files into Odin (PDA - ROM and kernel, Modem - Phone, CSC - CSC) and hit "Start".
Then it should download fine. If you are still having trouble, feel free to PM me and I'll gladly help via TeamViewer
Lg
Sound to me like Kies was running in the background while you made the Odin flash.....you must disable Kies before using Odin
No Kies was not running in the backgorund..
Could it be, because I was going from 4.1.2 down to 4.0.1 for example? It is a old firmware..
I solved my problem with installing an Omega Rom v43, but I still want to back to original firmware..
what does the log say?
I dont now how to look at the log..
Can I just flash the original firmware even that I am on a Omega firmware?
Glebun said:
what does the log say?
Click to expand...
Click to collapse
Here is what the log says..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
Sivasli_ said:
No Kies was not running in the backgorund..
Could it be, because I was going from 4.1.2 down to 4.0.1 for example? It is a old firmware..
I solved my problem with installing an Omega Rom v43, but I still want to back to original firmware..
Click to expand...
Click to collapse
The new 4.1.2 bootloader (I assume you have it, unless you specifically replaced it with the older one) will blacklist older bootloaders and prevent them from being installed. This might be part of the problem.
Hello,
I am trying to flash openrecovery-twrp-2.7.1.0-i9300.tar to my Galaxy S3 i9300 with Odin 3.09
The process seems to complete successfully and Odin shows a [PASS!] but once i reboot in recovery mode TWRP is not there
(i get a "android recovery mode <3e>" screen which i suppose is a vanilla/default recovery mode?).
PS. i have kies3 latest edition installed and windows7 x64 seem to indicate that all phone drivers are installed correctly.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/003> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
DarkNik said:
Hello,
I am trying to flash openrecovery-twrp-2.7.1.0-i9300.tar to my Galaxy S3 i9300 with Odin 3.09
The process seems to complete successfully and Odin shows a [PASS!] but once i reboot in recovery mode TWRP is not there
(i get a "android recovery mode <3e>" screen which i suppose is a vanilla/default recovery mode?).
PS. i have kies3 latest edition installed and windows7 x64 seem to indicate that all phone drivers are installed correctly.
Click to expand...
Click to collapse
Try again untick reboot in odin wait until it flashes switch phone off or pull battery and reboot manually Volume up + Home+Power see if that works.
Flash CWM first. After that you can try flash TWRP via odin or via recovery
tallman43 said:
Try again untick reboot in odin wait until it flashes switch phone off or pull battery and reboot manually Volume up + Home+Power see if that works.
Click to expand...
Click to collapse
I tried but even that yielded no results
verny94 said:
Flash CWM first. After that you can try flash TWRP via odin or via recovery
Click to expand...
Click to collapse
I am not familiar with CWM, i will be googling it now and see what i can find in case i need to proceed with it.
I found this CWM bundle that also has a version of odin that reportedly works with my i9300.
MEGA_CO_NZ link -> /#!csdzBRRb!V-ZDrGuVB29Ywq9tdE64BGGJwpNvHFibeS9TQ2y2p1o samsung-galaxy-s3-i9300-touch-cwm-odin.zip
followed the steps but boom even that was to no avail (i also tried to refollow the steps once with the no restart option @tallman43 mentioned.
DarkNik said:
I am not familiar with CWM, i will be googling it now and see what i can find in case i need to proceed with it.
Click to expand...
Click to collapse
A am not fan of CWM also. CWM (or Philz touch) will be only the way how to get TWRP
Hello,
Recently I bought a second hand Samsung Galaxy SIII 9300 with Android 4.3. Because of privacy reasons I’d like to install cm 13.0 on the phone. I already had CM on my former phone, the Nexus 4. This was very easy to install, but I have some difficties with the Samsung Galaxy S3. These are the things I already tried:
I tried to install TWRP 2.8.4 and CWM via Odin 3.1203 in Windows 8. You can see here the log:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I enabled USB debugging
I unchecked Auto-reboot in Odin.
After I installed TWRP I removed the battery.
Can you help me with my problem?
According to Odin, TWRP succeeded. Can you boot into TWRP? You flashed the correct version of TWRP?
Hello
I cannot boot into TWRP. I am sorry to put it in my question, but that is my question. I tried to flash TWRP 3.0.2.2
Open Odin, only check f reset time, flash, when you see the "reset" in the Odin status window, remove USB cable from phone, remove battery, replace battery, use buttons to get into TWRP.
Root then flash. Flash Chainfire autoroot then flash your recovery, then flash your rom.
Beamed in by telepathy.
I worked!!!! I has to root the phone and than flash TWRL. Thankt you very much!!!
Jan10000 said:
I worked!!!! I has to root the phone and than flash TWRL. Thankt you very much!!!
Click to expand...
Click to collapse
You're welcome. Further advice is to make a backup of your phone once it is set up as you like it. That way, if anything goes tits up you have half of the job already done.
With twrp it's only a matter of time before it (twrp) goes mental and you'll have to resetyour device amd start over. I found the last official clockworkmod recovery the most reliable and have had 2 solid years from it. Also, get a copy of your stock rom from somewhere. You'll need that one day too!.
Beamed in by telepathy.
audit13 said:
Open Odin, only check f reset time, flash, when you see the "reset" in the Odin status window, remove USB cable from phone, remove battery, replace battery, use buttons to get into TWRP.
Click to expand...
Click to collapse
Hi, thanks. This worked for my GT-i9305.
I had previously done the flash for GT-i9300 years ago and was stuck on the same issue as the op.
TWRP 3.3.1-0
twrp-3.3.1-0-i9300.img
twrp-3.3.1-0-i9300.tar
source: https://github.com/ripee/android_device_samsung_i9300