i try to flash a metamorph on my samsung vibrant on jI6 but i didnt have clockwork mod and i dont know how to get into download mode now my jus keeps boot looping any way i can fix this brand new vibrant!
try re flashing with oden switch will bring your phone back to stock, and then getting clock work and preform a nandroid before any further mods!
oden how to: http://forum.xda-developers.com/showthread.php?t=773387
offical JI6: http://http://forum.xda-developers.com/showthread.php?p=8511186#post8511186
Moved to Q&A and changed the title.
My advice is to read and KNOW what you are doing before you jump in and have issues. I am leaving this thread open it hopes you find your answer....even though the answer is readily available if you search.
@all
Please only post useful info that will help the OP!
DO NOT flame him…!
Instructions Here
http://forum.xda-developers.com/showthread.php?t=803492
First, download http://www.multiupload.com/NMPX3KMWRS
This contains Odin, the Samsung Drivers, stock odin rom, updated odin rom, pit file.
If you don't want to lose your settings, etc. you can skip to the second part. If your phone still doesn't work than start from the top.
-PART 1-
Step 1.) Make sure you have the appropriate drivers installed for your phone. If you are on 64bit then choose 64, if you are on 32 choose 32. You may already have the drivers installed and it will tell you after you try to install them.
Step 2.) Power your phone off
Step 3.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 4.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 5.) To ensure your phone is back to stock, in odin you will want to check the repartition button. ONLY CHECK IT WHEN YOU ARE FLASHING BACK TO STOCK. Leave the other check boxes the way they are.
Step 6.) Click the PIT button and select the 512.pit file
Step 7.) Click the PDA button and select Original.tar and then click Start
It should go through a bunch of steps and then your phone will reboot. Below are the steps to update it to the latest release.
Close Odin and power your phone off.
-PART 2-
Step 1.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 2.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 3.) Leave all check boxes the way they are. Do NOT check the repartition box.
Step 4.) Click the PIT button and select the 512.pit file
Step 5.) Click the PDA button and select T959UVJI6.tar and then click Start
It will go through a bunch of steps and then your phone will reboot. Congrats, you are on the latest update!
Related
I did the OTA update after doing a nandroid backup.
As luck would have it i'm stuck at the Vibrant Samsung logo.
I can get into System recovery (vol up + vol dwn + pwr) but can't find a way to restore my nandroid.
The phone is mostly stock with circular battery indicator and boot logo changed to galaxy stock (instead of tmobile) no custom roms or kernels.
Any help?
Thanks.
Azimuth0r said:
I did the OTA update after doing a nandroid backup.
As luck would have it i'm stuck at the Vibrant Samsung logo.
I can get into System recovery (vol up + vol dwn + pwr) but can't find a way to restore my nandroid.
The phone is mostly stock with circular battery indicator and boot logo changed to galaxy stock (instead of tmobile) no custom roms or kernels.
Any help?
Thanks.
Click to expand...
Click to collapse
Reinstall packages. That should get you into clockwork recovery.
From clockwork you can find your backup and restore it.
Yeah, cw recovery is the key. Do you have it? I assume yes if you're trying to restore.
I'm having a heckuva time...
I've got the same problem, but am a little farther along.
I've tried restoring from my backup, and each time, it says:
ClockworkMod Recovery v2.5.0.4
Checking MD5 sums...
Restoring system...
Restoring data...
(runs through a whole bunch of files)
Restoring datadata...
(runs through a whole bunch of files)
.android_secure.img not found. Skipping restore of /sdcard/.android_secure.
Restoring cache...
sd-ext.img not found. Skipping restore of /sd-ext/.
Restore complete!
And yet, it still hangs at the vibrant intro screen. I know some things have been restored, because my annoying startup sound is back.
You sure it's just not taking a long time at boot?
You cant restore to a JI2 rom or recovery from the JI6 update . If you have a JI6 nandroid recover to that .
Sent from my SGH-T959 using XDA App
you are quite right. I did use Clockwork Mod and Rom Manager to create the nandroid.
When I select reinstall packages I get the following:
Installing update...
Installation Aborted.
I suspect update.zip is not the right file (I don't know what I installed last but it wasn't CW recovery). Is there away to replace update.zip without booting into android?
I had the same problem. Your best bet is to ODIN and flash to the new JI6 through ODIN. Then go into clockwork recovery and do an "Advanced Restore" and only restore "data" that way you get your desktop config and apps restored, only thing missing would be root and any metamorph/update.zip's themes you've applied.
I have never done anything in Odin before. Can you point me to the best place to get started?
where do I find a JI6 image for Odin?
Thanks for all the help guys.
joshthewaster said:
Reinstall packages. That should get you into clockwork recovery.
From clockwork you can find your backup and restore it.
Click to expand...
Click to collapse
I wish I knew this a couple weeks ago. Would have saved me from using ODIN. Oh well, at least I know how to use it now.
Azimuth0r said:
I have never done anything in Odin before. Can you point me to the best place to get started?
where do I find a JI6 image for Odin?
Thanks for all the help guys.
Click to expand...
Click to collapse
Go to the bible under development section . You can find the JI6 tar and odin . You will also need the drivers for the phone .
Sent from my SGH-T959 using XDA App
Here is what helped me. A very kind and generous person posted the following and it makes it quite easy if you follow the steps carefully.
First, download http://www.multiupload.com/NMPX3KMWRS
This contains Odin, the Samsung Drivers, stock odin rom, updated odin rom, pit file.
If you don't want to lose your settings, etc. you can skip to the second part. If your phone still doesn't work than start from the top.
-PART 1-
Step 1.) Make sure you have the appropriate drivers installed for your phone. If you are on 64bit then choose 64, if you are on 32 choose 32. You may already have the drivers installed and it will tell you after you try to install them.
Step 2.) Power your phone off
Step 3.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 4.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 5.) To ensure your phone is back to stock, in odin you will want to check the repartition button. ONLY CHECK IT WHEN YOU ARE FLASHING BACK TO STOCK. Leave the other check boxes the way they are.
Step 6.) Click the PIT button and select the 512.pit file
Step 7.) Click the PDA button and select Original.tar and then click Start
It should go through a bunch of steps and then your phone will reboot. Below are the steps to update it to the latest release.
Close Odin and power your phone off.
-PART 2-
Step 1.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 2.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 3.) Leave all check boxes the way they are. Do NOT check the repartition box.
Step 4.) Click the PIT button and select the 512.pit file
Step 5.) Click the PDA button and select T959UVJI6.tar and then click Start
It will go through a bunch of steps and then your phone will reboot. Congrats, you are on the latest update!
__________________
OK, I'm going to go the odin route. But just for my enlightenment, Is there a way to put update.zip files on the internal SD card when you can't boot to android?
I'd also like to get a copy of my backups off the internal SD before I Odin over everything.
Azimuth0r said:
OK, I'm going to go the odin route. But just for my enlightenment, Is there a way to put update.zip files on the internal SD card when you can't boot to android?
I'd also like to get a copy of my backups off the internal SD before I Odin over everything.
Click to expand...
Click to collapse
Just use the tar file in odin and all your data will still be there .
Sent from my SGH-T959 using XDA App
Thanks everyone. I used the procedure in an article entitled "Walkthrough: How to Manually Flash JI6 Firmware for Samsung Vibrant" i'd post a link but I'm a Newb and not allowed to.
Stuck at "Vibrant." Trying this now...and hoping...
tenbeau said:
Here is what helped me. A very kind and generous person posted the following and it makes it quite easy if you follow the steps carefully.
First, download http://www.multiupload.com/NMPX3KMWRS
This contains Odin, the Samsung Drivers, stock odin rom, updated odin rom, pit file.
If you don't want to lose your settings, etc. you can skip to the second part. If your phone still doesn't work than start from the top.
-PART 1-
Step 1.) Make sure you have the appropriate drivers installed for your phone. If you are on 64bit then choose 64, if you are on 32 choose 32. You may already have the drivers installed and it will tell you after you try to install them.
Step 2.) Power your phone off
Step 3.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 4.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 5.) To ensure your phone is back to stock, in odin you will want to check the repartition button. ONLY CHECK IT WHEN YOU ARE FLASHING BACK TO STOCK. Leave the other check boxes the way they are.
Step 6.) Click the PIT button and select the 512.pit file
Step 7.) Click the PDA button and select Original.tar and then click Start
It should go through a bunch of steps and then your phone will reboot. Below are the steps to update it to the latest release.
Close Odin and power your phone off.
-PART 2-
Step 1.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 2.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 3.) Leave all check boxes the way they are. Do NOT check the repartition box.
Step 4.) Click the PIT button and select the 512.pit file
Step 5.) Click the PDA button and select T959UVJI6.tar and then click Start
It will go through a bunch of steps and then your phone will reboot. Congrats, you are on the latest update!
__________________
Click to expand...
Click to collapse
I was all set to go the ODIN route, but can't seem to get the drivers to recognize the phone; I've installed on two different machines (One 64 bit Windows 7, one 32 bit Windows XP) to no avail. ODIN doesn't notice when I plug it in as described above.
Any ideas??
Timodious said:
I was all set to go the ODIN route, but can't seem to get the drivers to recognize the phone; I've installed on two different machines (One 64 bit Windows 7, one 32 bit Windows XP) to no avail. ODIN doesn't notice when I plug it in as described above.
Any ideas??
Click to expand...
Click to collapse
Are you in download mode and did you run odin as administrator
Sent from my SGH-T959 using XDA App
i actually wiped my cache and reinstalled the package to get back into the device. then did a clockworkmod recovery.
you need to turn your phone on before plugging it in, otherwise the phone doesnt communicate over usb, it enters charging mode
Okay so I went from onyx 4.2 to a nandroid backup of bionix findal. Then since the backup was a 2.1 rom I flashed a 21 kernel then I rebooted and its stays at the vibrant screen and keeps going into recovery when I hit reinstal packages it takes me back to stock recovery not Cwm. So what do I do from here
Hit refresh packages again. Sometimes it takes more than one time.
Same thing happened to me, I ended up using odin....again. Thank god for odin
Sent from my SGH-T959 using XDA App
nick1217 said:
Okay so I went from onyx 4.2 to a nandroid backup of bionix findal. Then since the backup was a 2.1 rom I flashed a 21 kernel then I rebooted and its stays at the vibrant screen and keeps going into recovery when I hit reinstal packages it takes me back to stock recovery not Cwm. So what do I do from here
Click to expand...
Click to collapse
If you cannot get into CWM recovery, than most likely you will have to Odin. If you know how to use adb, then adb the CWM update.zip onto /sdcard and select re-install packages from the normal recovery. If you don't know how to use adb, then you can either learn or follow the directions in this post on how to use Odin. You might want to learn Odin anyways as it is extremely useful if you softbrick without access to recovery.
Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions at the end of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. Hopefully it will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
Download the files in the linked thread and follow the directions there or the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
hockeyrcks you arE the man, thanks so much. worked great
nick1217 said:
hockeyrcks you arE the man, thanks so much. worked great
Click to expand...
Click to collapse
Glad I could help you out. Just make sure you keep all the files on your computer in case you have to do it again. I had never had to use Odin until recently. Then I had to use it three times in one day.
As the title has stated, I have flashed my Samsung Vibrant with Team Whiskey's Obsidian V4.2 - Android 2.2 w/ Universal LagFix Kernel
It works fine except for one thing...When I try to install an application from the Market, It says there is not any available space on the phone. When I look at my SD card under Settings, I have 13.03 GB of space but under Application Storage, the available space is 0.00B!
I do not know how to fix this and I have the 2GB SD with Avatar on it but I do not know how to fix the problem of installing applications on my Samsung Vibrant!!
PLEASE HELP!!!
This is a fairly common problem with this rom. If your familiar with odin you can use it to flash back to stock, then you can reflash obsidian.
So you think it's the ROM itself and not the flashing process? This was my first time flashing my device or any device for that matter.
How exactly do I flash back to the old ROM?
Where do I find the file to the old ROM?
Where can I get ODIN?
What version, if any, do I need for the Vibrant?
Check the android dev section, there is a stickie called the vibrant bible. There are instructions in there for using odin. It seems daunting at first, but take your time and read, read, read. Also look up a fellow user named moonfire, he has all the info in his signature.
Sent from my SGH-T959 using XDA App
just reboot ur phone
Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions later in my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. You should be in dl mode.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download mode.
Once in download mode
Download the files in the linked thread and follow the directions there or the ones below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Also, you might have to build the usb jig. It is guaranteed to get you into download mode. Here is a link to that thread:
http://forum.xda-developers.com/showthread.php?t=819551
Also, if you would like I can use remote log in to your computer and do it for you. Send me a pm or email: [email protected]
They posted a fix for this
Sent from my SGH-T959 using XDA App
and when people say flash to stock. they mean the JFD rom.
it is stuck on boot screen the logos just keep flashing but nothing happens. i cant go to recovery mode or download mode it wont work. i just put ginger clone rom and it messed my phone up plz help THANKS VERY MUCH
Odin back to stock . Pull the battery hold both vol buttons then plug in micro usb to get to Download mode . And most likely user error is what messed up your phone . Tons of people flashed Eugenes GingerClone no problem including myself so its not the rom .
Yes, follow the 1st post pull battery hold vol up/down and then plug in the usb into the phone.
It may have been you did not disable the voodoo lagfix before trying to flash
This procedure will get you back to stock and then you can go from there:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Load the JFD rom for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
15. Then, root the phone and you can flash your new Rom.
Doing this method will get everything back to normal and the phone will work just like it did right out of the box
i have tried holding down the volume rocker and power, as well as the up and power, and down and power, but it just keeps on starting up. is there any other way to get into recovery mode?
What phone do you have?
On AT&T SGSII SGH-I777 the correct button combination is vol+ vol- and Pwr.
Hold down all three buttons until the boot screen appears, goes black, and appears a second time. (In case it doesn't boot into recovery on the first screen.)
sniper8752 said:
i have tried holding down the volume rocker and power, as well as the up and power, and down and power, but it just keeps on starting up. is there any other way to get into recovery mode?
Click to expand...
Click to collapse
Impossible to offer any reliable assistance without knowing things like whether or not you're rooted, if rooted which ROM/kernel you're using, etc.
it continues to boot. could something be corrupt? is there another way to get around this?
i have gt-i9100 installed. it was i777 before.
sniper8752 said:
it continues to boot. could something be corrupt? is there another way to get around this?
i have gt-i9100 installed. it was i777 before.
Click to expand...
Click to collapse
If you flashed firmware for the I9100 by mistake, and the firmware contained the secondary bootloader, then the button configuration would be different than the I777. Is that what happened?
If so, then you should flash the full stock UCKH7 firmware which includes bootloaders which you can get from the Download Repository. See the link in my signature.
This is what i believe is happening. i don't believe that my phone is rooted though. i don't see any superuser apps.
If you flashed an I9100 firmware by mistake using Odin, you would almost certainly not be rooted.
Anyway, if that is what has happened to your phone, then you need to use Odin to flash back to fully stock UCKH7 Gingerbread using the full firmware flash that contains secondary bootloader and param.lfs files. You can find that in the Download Repository. If you need more assistance, just ask.
so i use this site: http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46 ? if so, which one do i use?
and thanks so much for your help! i appreciate it.
Flash the firmware under the heading I777UCKH7-CL503881 Stock Binaries. You can use either the one-click downloader or the tar.md5 file. The one click downloader is easier.
i noticed there is only a .exe. i ran this, and clicked on start, and it just said this:
<OSM> All threads completed. (succeed 0 / failed 0)
My phone is plugged in and on.
Open the exe file on your desktop. Then put the phone into download mode by:
with the phone off, hold down vol+ and vol- while plugging in the usb cable. Odin should recognize your phone. Then press start.
i don't think that three-button combo worked for me. it turns on the sg2 logo, then black screen, then the logo again, and then boots up normally.
It's not 3 buttons. vol+ and vol- but not power.
Here are the complete flashing instructions. Follow them step by step, and in order. This is for stand-alone odin, but applies to the one-click version as well, except you can ignore the steps about choosing the file, what to check, etc.
______________________________________________________________
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different. (Skip steps 6 to 8 with one-click downloader.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
Let me know if it flashes successfully.
not getting the yellow bar. it just shows the charging sign on my phone. :/
Yes of course. I'm moving too fast and not thinking.
You flashed I9100 secondary bootloader. Your recovery button combination is changed. Your download mode button combination is also changed.
OK. You can get a usb jig to put your phone into download mode. If you don't have one, you can buy one on the net.
Or... you can also boot into download mode using "adb reboot download". I havn't used this method to start an Odin flash, but I presume you would use adb to put the phone into download mode, unplug the usb cable, close the command prompt, open Odin and plug the usb cable back into the phone.
If you are unfamiliar with adb, here is a pretty good place to start learning about it.
hm, could i do this?:
BUT WHAT IF I’M/YOU’RE TRYING TO GET TO CLOCKWORKMOD RECOVERY?
1 ) Before the above you should have downloaded ROM Manager from the Android Market and Flashed ClcockworkMod REcovery. When it ask you what version you should select “Samsung T-Mobile GalaxyS2.” I know it says T-Mobile but select it anyways.
2 ) From Rom Manager you can select Reboot into Recovery OR you can turn your phone off and follow my previous top instructions.
http://forum.xda-developers.com/showthread.php?t=1409769
No. Never use rom manager on the I777.
Edit: That link is from I727 Skyrocket forums. I sure hope your phone is I777 not I727. That's what you said earlier.
Another way to try to get into download mode:
Remove the battery. Hold down one or both of the volume buttons and plug in the usb cable. The usb connection will supply the power. Try that while you have odin open on the pc, and see if it gets you into download mode.
it worked!!!!
where is the tar file?
i just didn't apply any file for 1.81. what does it do, by the way, with no file selected?
If you used the one-click downloader, the firmware and Odin are both contained in the exe file, so you don't have to add anything. If you pressed start, and Odin reported success, then you flashed the firmware.