Hello ppl
I've had some problems with my Samsung Vibrant (The T-Mobile model) since last friday. As I am kinda new to android, i did some stupid things, such as inserting GT-i9000 firmware into it by mistake, wich didn't work.
So I downloaded JI5 firmware, inserted it into my Vibrant using Odin, and upgraded it to JI6 using Kies.
The only thing I was bothered is that every time i switched my phone On, the 1st screen I was seeing was "Samsung Galaxy S GT-i9000", wich suddenly was changing into VIBRANT and the boot was going on OK, and I could use my phone normally.
In fact, not normally. I couldn't root it with One Click Lag Fix, nor with that update.zip thing in recovery mode, since I couldn't enter recovery mode (the keys combination were not working at all for it).
After a few hours of google, I found nothing that would solve my problem. By this far, I've have already downloaded a lot of firmwares, and i was still seeing the GT-i9000 screen before everything, and could not root or access recovery mode on myd device.
Then it came to me the GREAT IDEA! Download JI4, and older firmware, and upgrade it using KIES to JI6.
First step was alright. I downloaded JI4, installed on my vibrant using Odin... but when I started kies to upgrade it, Kies told me my fw version wasn't upgradeable. Damn!
So i decided to turn back to JI5 using Odin.
Occurs that when I start my phone in "download mode", now it shows me a screen saying "POWER RESET or UNKNOWN UPLOAD MODE". Odins recognize it normally, but when I try to upload a JI5 or JI6 firmware, it keeps stuck in this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
I've tried to restart this proccess dozens of times and still had no success.
Would any of you guys help me?
My phone is working right now, with JI4, but it is not what I want!!
Close odin and restart it. Sometimes it takes a few times with odin.
Incidentally, why don't you just download the OTA JI6 file and flash it with odin on here.
Or just keep it open and open another one to flash with, that helps my odin issues
Sent from my SGH-T959 using XDA App
djquick said:
Close odin and restart it. Sometimes it takes a few times with odin.
Incidentally, why don't you just download the OTA JI6 file and flash it with odin on here.
Click to expand...
Click to collapse
I've tried to open and restart it hundreds of times...
And i didn't receive the OTA JI6 file yet, i think that is due to the fact that I live in Brazil
Hey. I recently was using the Froyo Rom that had the same boot screen that read "Samsung Galaxy S GT-i9000." I also have a TMobile Samsung Vibrant. I had that same problem with recovery where none of the keys would work. I resolved the issue by using oding and I flashed T959UVJFD which is the original shipped FW for it. Try that method.
Remember use Odin 1.3 version. In Odin, place a check box in "Re-partition" and leave everything else the same. Select your 512.PIT for PIT and Phone should be set to
T959UVJD.tar. Than select start. Before that make sure your phone displays "Downloading Mode". Remove battery first and Re-insert it, while holding both up and down volume keys (make sure usb cable is connected into phone first) than finally open up odin, connect the usb cable to the computer. Odin should detect it with a yellow COM Port ID.
Thanks.
mulcahyd said:
Hey. I recently was using the Froyo Rom that had the same boot screen that read "Samsung Galaxy S GT-i9000." I also have a TMobile Samsung Vibrant. I had that same problem with recovery where none of the keys would work. I resolved the issue by using oding and I flashed T959UVJFD which is the original shipped FW for it. Try that method.
Remember use Odin 1.3 version. In Odin, place a check box in "Re-partition" and leave everything else the same. Select your 512.PIT for PIT and Phone should be set to
T959UVJD.tar. Than select start. Before that make sure your phone displays "Downloading Mode". Remove battery first and Re-insert it, while holding both up and down volume keys (make sure usb cable is connected into phone first) than finally open up odin, connect the usb cable to the computer. Odin should detect it with a yellow COM Port ID.
Thanks.
Click to expand...
Click to collapse
I was just coming here to tell this. I've downloaded T959UVJFD and made this to enter download mode correctly:
METHOD 1: ACCESSING DOWNLOADER/RECOVERY:
(if the following directions do not work... then your phone may be locked out from using hardware buttons to access downloader/recovery)
Download Mode:
With the phone powered off
Plug in the USB cable.
Turn the phone on it's side and use both thumbs to hold (left thumb) Vol Up and (right thumb) Vol Down
Press and hold the power button with your right index finger til you see "Virbant" release the power button and it should say Downloading.
Recovery Mode:
With the phone powered off
UnPlug the USB cable.
Turn the phone on it's side and use both thumbs to hold (left thumb) Vol Up and (right thumb) Vol Down
Press and hold the power button with your right index finger til you see "Virbant" release the power button and it should be on the recovery screen.
Click to expand...
Click to collapse
(found here: http://forum.xda-developers.com/showthread.php?t=771247)
Now i'm upgrading to JI6 with KIES, i think everything is gonna be alright.
Cool. Glad to see things will be okay now.
Using KIES is your first mistake, even T-Mobile doesn't recommend it...
Make sure you have the Samsung USB drivers installed to use ODIN.
Moved to...Q&A
Related
Hello,
Recently I tried to fix my phone and for some reason thought I needed to repair my bootloader. I was reading a thread on here and it seemed like the solution someone posted was the fix I needed.
Wrong! I flashed the primary bootloader and secondary bootloader that was intended for a Samsung I9000 Galaxy S. After I had done that I couldn't get into download mode. My phone would still turn on and go to a boot screen that said "Samsung I9000 Galaxy S" and then it would turn into my old "Vibrant" screen. This would just loop over and over.
I couldn't get it into download mode for the life of me! Up/Down + Power wasn't working. Neither was the Up/Down + drop your battery back into your phone trick. So today I went out and picked up a jig and SUCCESS! My phone can now get back into download mode. At this point my computer doesn't recognize my phone when I plug it in while in download mode. I fixed that by installed the drivers for the Samsung I9000 Galaxy S. Heimdall and Odin both recognize my phone as being plugged in.
Now this is where I'm stuck. How can I flash my original bootloader(s) back onto my phone? Where would I even download those at?
Regards,
kitchen
just odin the stock jfd in the bible
I was facing this problem.
At first I just could not go in Download mode as Vibrant does not have Home button. But then from one of the threads on xda I found out that pressing Up volume key (actual Up key of Vibrant not considering the reversing effect) and Power button together got me successfully on Download mode. I could do this successfully a number of times.
Now the second part. Yes, xstone is right, just download the stock JFD from Vibrant bible and flash it using Odin.
Make sure you use a 512 pit file while flashing and the 'Re-partition' and 'Phone Bootloader Update' check boxes should be checked.
Note: Although I got JFD working, I was still seeing i9000 screen followed by Vibrant screen at startup (though this does not have any ill effect). I then had a nandroid backup of my KA6 (froyo), I restored that using CWM and bang, everything was normal after that. No more i9000 screen at startup.
You can skip the nandroid backup if you don't have it or you don't want to, at least you would having a working phone with stock JFD.
This is where you will get stock JFD - "http://forum.xda-developers.com/showthread.php?t=734475"
Thanks for the links and info guys.
However, Odin doesn't seem to be getting anywhere past "File analysis.."
Here's what I'm doing:
1) Removed SD and SIM card
2) Removed battery and made sure phone was completely off
3) Put battery back in and used a jig to get it into download mode
4) Open up Odin (as administrator)
5) Setup the PIT and PDA, and checked Re-Partition
6) Plugged phone into the USB port (I've tried both)
7) Hit Start
This is what I see:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
Click to expand...
Click to collapse
did you check the md5 sum to make sure they were a good download for the pit/tar?
May not matter, but I prefer this order when i ODIN
open odin on pc
connect usb to pc
phone into download
connect usb to phone
odin should show a COM & a # to show it's connected
select the pit and tar files
click start
wait for it to finish and phone reboot.
akakitchen said:
Thanks for the links and info guys.
However, Odin doesn't seem to be getting anywhere past "File analysis.."
Here's what I'm doing:
1) Removed SD and SIM card
2) Removed battery and made sure phone was completely off
3) Put battery back in and used a jig to get it into download mode
4) Open up Odin (as administrator)
5) Setup the PIT and PDA, and checked Re-Partition
6) Plugged phone into the USB port (I've tried both)
7) Hit Start
This is what I see:
Click to expand...
Click to collapse
Close ODIN, and then right click on it and "Run as Administrator"
This worked for me whenever I got stuck with Odin....
This did happen for me. Go to Control Panel > Device Manager and remove Samsung Composite Device or any other drivers related to Samsung Phone.
Then reconnect your phone to your pc/laptop, it will freshly install the phoen drivers. Now open Odin and try flashing.
^ good point... also make sure you are using the latest one in addition.
Hello,
Please read the WHOLE post, as I've already done hours of XDA research and could not come across a similar situation.
I'm afraid that after months of flashing away, I've finally bricked my phone (for good).
I was ODINing back to stock from CM7, but something went wrong and ODIN froze. Not thinking it was a big deal, I took out the USB cable out.
This prompted my phone to not respond at all (no power, no recovery combo). However, searching around XDA, I found the way to enter download mode (through the plug in USB then plug in battery while holding volume buttons trick). I flashed the Froyo bootloaders, thinking that my bootloader was corrupted. This made the phone turn on to the "VIBRANT" screen, but nothing else. I still could not get into recovery mode through the 3 button combo.
I then proceeded to ODIN a JFD image, along with the 512 pit file. This put my phone into a non-responsive (read: no buttons work) state again, and so I flashed the Froyo bootloaders again. Once again, I was stuck at the "VIBRANT" screen.
Then I ODINed a JFD image without repartitioning with the 512 pit file. This continued to put my phone at the "VIBRANT" screen.
What went wrong?
I read up something about JTAG service; is this what I need? (From what I read, if you can access download mode, you're good to go, so I'm not sure if I "hard-bricked" my phone)
THANKS so much...
if you were on cm7 it was 2 button
3 button is for recovery
battery out\ reinsert battery
press volumeup\down insert usb cable.... downlod should appear
odin to stock
Sugartibbs said:
if you were on cm7 it was 2 button
3 button is for recovery
battery out\ reinsert battery
press volumeup\down insert usb cable.... downlod should appear
odin to stock
Click to expand...
Click to collapse
I can get into recovery, and I can ODIN to stock, but my phone is continually bricked--in fact, if I ODIN to stock, my phone doesn't turn on. (I know I'm doing it correctly because I've done it successfully before)
R you ona 3g samsung vibrant?
Sugartibbs said:
R you ona 3g samsung vibrant?
Click to expand...
Click to collapse
Yes, I have the original 3G Samsung Vibrant.
Sorry, but i had to ask, when you come out of odin and have green pass you should come out in recovery and either reboot or have an error message, yet you have the vibrant logo, is reboot checked? If all ese fails Aio toolbox, then you know pit, pda and if necessary drivers are correct. and not corrupted.
This is gonna take a bit more searching but your gonna have to find Eugene's froyo that doesn't brick. Odin that and then Odin back to stock maybe you can pm him for the files.
Sent from my SGH-T959 using XDA App
Sugartibbs said:
Sorry, but i had to ask, when you come out of odin and have green pass you should come out in recovery and either reboot or have an error message, yet you have the vibrant logo, is reboot checked? If all ese fails Aio toolbox, then you know pit, pda and if necessary drivers are correct. and not corrupted.
Click to expand...
Click to collapse
Thanks for all your help!
I figured out the problem--apparently the PDA file was corrupted. Internet here is spotty, so I guess it corrupted while downloading. I flashed the re-downloaded PDA file, and was able to un-brick my phone.
hi all
i was usingg odin to root my phone.
everything seemed to b fine. I hd the green success/pass but when the phone automatically restarted after the root, it got stuck in the samsung screen.
hv to take out battery to turn off and same happning when i tried starting it again. also same when i press volume +- to turn on.
any ideas, help welcome....
thx a lot!!!
Time to get a jig
Sent from my SAMSUNG-SGH-I777 using XDA App
smartgoh said:
hi all
i was usingg odin to root my phone.
everything seemed to b fine. I hd the green success/pass but when the phone automatically restarted after the root, it got stuck in the samsung screen.
hv to take out battery to turn off and same happning when i tried starting it again. also same when i press volume +- to turn on.
any ideas, help welcome....
thx a lot!!!
Click to expand...
Click to collapse
Take the battery out. Put back in, plug USB cable in while holding volume down.
Should put you into download mode. If it does:
http://forum.xda-developers.com/showthread.php?t=1313659
If the screen turns on at all, you're not bricked.
No need for a jig - I think only the Captivate (Maybe I9000 too) had a bug that prevented you from getting into download mode with VolUp + VolDn + USB insertion
With the Infuse and I777, I have NEVER needed a jig to enter download mode. My pack of MicroUSB plugs from Sparkfun is still sitting unopened.
Entropy512 said:
If the screen turns on at all, you're not bricked.
No need for a jig - I think only the Captivate (Maybe I9000 too) had a bug that prevented you from getting into download mode with VolUp + VolDn + USB insertion
With the Infuse and I777, I have NEVER needed a jig to enter download mode. My pack of MicroUSB plugs from Sparkfun is still sitting unopened.
Click to expand...
Click to collapse
Entropy, I noticed the unbricking is based on your work, would be really great if you can help me out. I tried entering download mode, but it freezes with the loading cycle....
smartgoh said:
Entropy, I noticed the unbricking is based on your work, would be really great if you can help me out. I tried entering download mode, but it freezes with the loading cycle....
Click to expand...
Click to collapse
Looks like it tried to enter battery charging mode.
This has always worked for me:
Remove and reinsert battery
DO NOT HIT POWER
Plug USB cable into PC (if not already plugged in)
Hold VolUp + VolDn
Plug USB cable into phone while still holding those two buttons (Not power!)
Entropy512 said:
Looks like it tried to enter battery charging mode.
This has always worked for me:
Remove and reinsert battery
DO NOT HIT POWER
Plug USB cable into PC (if not already plugged in)
Hold VolUp + VolDn
Plug USB cable into phone while still holding those two buttons (Not power!)
Click to expand...
Click to collapse
thx I managed to go into dl mode via this way. however when trying to unbrick i got a fail. it was a yellow 0:[com3] in the box if it says anything
any thoughts?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
Someone else will have to help you here, I've only used Heimdall on Ubuntu to flash in download mode.
Looks like its connecting properly, but failing to flash the image somewhere in between.
Possibly try a different cable, as it might help. Also, if you can, charge the battery (not sure if that would be an issue)
A lot people said it's easy to root, I thought it's easy and unbrickable.
Reading this thread, I chicken out
Will follow this thread closely to see how it pans out.
Why didn't you use super one click to root.
And what package were you.trying to flash in Odin
Sent from my i777 high in the sky
It is more or less unbrickable as long as you READ fully before flashing random things to your phone. I've gone through the process with three different phones, and all have turned out well.
The guides in the general section aren't stickies because they're just there, they're meant to be read and followed...and if you don't get it, AK questions (you can look, I've asked a bunch of stupid questions in the beginning haha)
Remember: read twice, flash once. Problems? None.
/end minor rant
Sent from my SGH-I777 using xda premium
colbynmeghan said:
Why didn't you use super one click to root.
And what package were you.trying to flash in Odin
Sent from my i777 high in the sky
Click to expand...
Click to collapse
SOC doesn't work on kk6. I can only assume he is trying to use the one click +root Odin package. Still, it shouldn't have failed.
Looks like we need more info from OP if changing cable, reinstalling drivers, changing USB Ports, and charging battery doesn't work
Sent from my SGH-I777 using xda premium
avidmovies said:
It is more or less unbrickable as long as you READ fully before flashing random things to your phone.
Click to expand...
Click to collapse
Is it your definition of unbrickable? LOL
votinh said:
Is it your definition of unbrickable? LOL
Click to expand...
Click to collapse
No it's not, but having people flash stuff they don't understand is really frustrating. What's worse is when they make a OMFG I'M BRICKED post here, without seeing the 100 other threads, and ignoring the directions in all of them.
Other than flashing grossly inappropriate bootloaders, you can recover from any software issue. Then again, Odin isn't a toy, and many people are treating it like one.
Yup. Don't flash PITs, don't flash bootloaders (there are warnings against this anywhere in the I777 forums you might find a bootloader or PIT file), don't flash stuff intended for another phone unless given specific instructions that it's OK (such as if you follow the Hellraiser instructions), and you'll be fine.
ok i tried using another cable, but sine the fail last time i seem to just get the following message and can't go back into dowlnload mode
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
obviously Kies doesnt recognise my phone anymore..
Previously I followed the instructions from galaxys2root and everything seemed fine, had the green success and the nightmare only started when phone automatically rebooted.
This is kind of out of left field, but have you tried using different USB ports on your PC?
I vaguely recall reading somewhere on these forums that some USB ports not mounted on the PC's motherboard sometimes don't play nice when talking to some devices...maybe it was just for Macs or something - not sure - but might be worth a shot if you haven't tried already...
smartgoh said:
ok i tried using another cable, but sine the fail last time i seem to just get the following message and can't go back into dowlnload mode
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
obviously Kies doesnt recognise my phone anymore..
Previously I followed the instructions from galaxys2root and everything seemed fine, had the green success and the nightmare only started when phone automatically rebooted.
Click to expand...
Click to collapse
Need more info to troubleshoot the problem. The first thing you did was try to root using the galaxys2root.com rooting method for the I777 for Windows?
You flashed the zedomax root kernel using Odin3 v1.85 included in the download. The "SGH-I777-ATTGalaxyS2RootStockZedomaxKernel.tar" from the download in those instructions contains only the zImage, which is the kernel image. Can you please verify that this specific tar is what you flashed, and confirm that the flash was successful but that the phone would then not boot past the initial boot screen.
Incidentally, many have used the zedomax I777 root kernel to root succesfully. So we need to eliminate other possibilities. Are you sure you used the instructions for rooting the I777? There are instructions on that site for International version, T-Mobile version and Sprint version as well. And your phone is an AT&T I777?
Have I got my infuse bricked? Can someone please help!
I had encountered a rebooting in loop issue after I installed MIUI 2.3.7 (ICS theme). My phone was restarting after every 45-50 seconds. I tried to installed stock room using GTG's UBrick in download mode and it got reboot after a minute. Now, I see a screen with message "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again" with phone--- yellow triangle ----- computer icon!
I don't know if I have completely bricked my phone or not but is there any way out, can I somehow go to download mode? or any pointer would help.
Thanks in advance.
My first contribution to this forum is a request for help. In the following you can read what I did with my Vibrant.
1) starting point: android with eclair 2.1 stock, unlocked
2) rooted
3) Upgrade from eclair to froyo done with kies
4) want to go back to eclair to install ics passion
5) remove sim, remove sdcard, put the phone in download mode, start odin, select pit and PDA
6) hit start, odin shows following messages
Added
Odin v.3 engine (ID:6)
File analysis
Get PIT for mapping
Firmware update start
cache.rfs
It hangs here, telephone screen gets black, no progess in green status bar
7) Wait and wait. Stop odin (probably a very wrong move ...)
8) try again, nothing happens. If I try to put the phone in download mode (with the volume up/down button) or if I connect it to power I can see 3 icons on the scren:
- a telephone on the left
- a yellow warning sign in the middle
- a computer on the right
9) no way of powering on the phone, no ways to go to download mode
10) adb does not see the phone when plugged on usb
11) odin sometimes detects the phone when connected, if I try to run it again, I get the same hang as at point 6
Any suggestion is welcome
K.
That icon you are getting is still download mode. You could pull battery to try and get in the regular one I guess.
Odin hangs on me occasionally. Make sure you run as adminastrator and don't touch cable. The newest Odin hasn't hanged on me yet too, 1.8.3 something like that.
Sent from my GT-I9000 using XDA App
Thanks for your response. If I understand, your suggestion is to:
- try again with Odin also with the 3 icons on the telephone screen
- run it as administrator
- retry until Odin is successfull
Am I correct?
K.
Check out the MIUI guide stickied and about halfway down is exactly what you are talking about and a solution.
OK, I've tried again
1) by running Odin as administrator
2) by using the PDA downloaded from here
androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant pointing to
files.androidspin.com/downloads.php?dir=androidspin/samsung/vibrant/&file=T959UVJFD.tar
instead of the file I had on the PC (I do not remember where I got it from)
3) It stopped snowing, but probably this has not a relevant impact on adroid phones ...
and it worked, the Vibrant is alive again running stock eclair
Again many thanks to trailblazerz11.
Woodrube, I've seen only now your post, thanks in any case for your suggestion too.
i have tried holding down the volume rocker and power, as well as the up and power, and down and power, but it just keeps on starting up. is there any other way to get into recovery mode?
What phone do you have?
On AT&T SGSII SGH-I777 the correct button combination is vol+ vol- and Pwr.
Hold down all three buttons until the boot screen appears, goes black, and appears a second time. (In case it doesn't boot into recovery on the first screen.)
sniper8752 said:
i have tried holding down the volume rocker and power, as well as the up and power, and down and power, but it just keeps on starting up. is there any other way to get into recovery mode?
Click to expand...
Click to collapse
Impossible to offer any reliable assistance without knowing things like whether or not you're rooted, if rooted which ROM/kernel you're using, etc.
it continues to boot. could something be corrupt? is there another way to get around this?
i have gt-i9100 installed. it was i777 before.
sniper8752 said:
it continues to boot. could something be corrupt? is there another way to get around this?
i have gt-i9100 installed. it was i777 before.
Click to expand...
Click to collapse
If you flashed firmware for the I9100 by mistake, and the firmware contained the secondary bootloader, then the button configuration would be different than the I777. Is that what happened?
If so, then you should flash the full stock UCKH7 firmware which includes bootloaders which you can get from the Download Repository. See the link in my signature.
This is what i believe is happening. i don't believe that my phone is rooted though. i don't see any superuser apps.
If you flashed an I9100 firmware by mistake using Odin, you would almost certainly not be rooted.
Anyway, if that is what has happened to your phone, then you need to use Odin to flash back to fully stock UCKH7 Gingerbread using the full firmware flash that contains secondary bootloader and param.lfs files. You can find that in the Download Repository. If you need more assistance, just ask.
so i use this site: http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46 ? if so, which one do i use?
and thanks so much for your help! i appreciate it.
Flash the firmware under the heading I777UCKH7-CL503881 Stock Binaries. You can use either the one-click downloader or the tar.md5 file. The one click downloader is easier.
i noticed there is only a .exe. i ran this, and clicked on start, and it just said this:
<OSM> All threads completed. (succeed 0 / failed 0)
My phone is plugged in and on.
Open the exe file on your desktop. Then put the phone into download mode by:
with the phone off, hold down vol+ and vol- while plugging in the usb cable. Odin should recognize your phone. Then press start.
i don't think that three-button combo worked for me. it turns on the sg2 logo, then black screen, then the logo again, and then boots up normally.
It's not 3 buttons. vol+ and vol- but not power.
Here are the complete flashing instructions. Follow them step by step, and in order. This is for stand-alone odin, but applies to the one-click version as well, except you can ignore the steps about choosing the file, what to check, etc.
______________________________________________________________
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different. (Skip steps 6 to 8 with one-click downloader.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
Let me know if it flashes successfully.
not getting the yellow bar. it just shows the charging sign on my phone. :/
Yes of course. I'm moving too fast and not thinking.
You flashed I9100 secondary bootloader. Your recovery button combination is changed. Your download mode button combination is also changed.
OK. You can get a usb jig to put your phone into download mode. If you don't have one, you can buy one on the net.
Or... you can also boot into download mode using "adb reboot download". I havn't used this method to start an Odin flash, but I presume you would use adb to put the phone into download mode, unplug the usb cable, close the command prompt, open Odin and plug the usb cable back into the phone.
If you are unfamiliar with adb, here is a pretty good place to start learning about it.
hm, could i do this?:
BUT WHAT IF I’M/YOU’RE TRYING TO GET TO CLOCKWORKMOD RECOVERY?
1 ) Before the above you should have downloaded ROM Manager from the Android Market and Flashed ClcockworkMod REcovery. When it ask you what version you should select “Samsung T-Mobile GalaxyS2.” I know it says T-Mobile but select it anyways.
2 ) From Rom Manager you can select Reboot into Recovery OR you can turn your phone off and follow my previous top instructions.
http://forum.xda-developers.com/showthread.php?t=1409769
No. Never use rom manager on the I777.
Edit: That link is from I727 Skyrocket forums. I sure hope your phone is I777 not I727. That's what you said earlier.
Another way to try to get into download mode:
Remove the battery. Hold down one or both of the volume buttons and plug in the usb cable. The usb connection will supply the power. Try that while you have odin open on the pc, and see if it gets you into download mode.
it worked!!!!
where is the tar file?
i just didn't apply any file for 1.81. what does it do, by the way, with no file selected?
If you used the one-click downloader, the firmware and Odin are both contained in the exe file, so you don't have to add anything. If you pressed start, and Odin reported success, then you flashed the firmware.