I KEEP GETTING THIS ERROR MESSANGE "error {266}" AFTER I TRY AND FLASH, THE PROCESS STARTS BUT WHEN IT IS ABOUT TO START THE PROCESS IT JUST STAYS ON 0% THEN COMES UP WITH THIS ERROR BEFORE THE FLASHING STARTS ?
ANY SUGGESTIONS
It happened to me too ... I sent in for service but I had to pay (€ 190.00) because it was amended and this would invalidate the warranty ... I have replaced the motherboard ... excuse my English
oh
can anyone help i have a 1.72 hong kong rom and it just stops when i try install anything and gives me the ERROR 266 and cant contact the phone anymore ?
trav_44 said:
can anyone help i have a 1.72 hong kong rom and it just stops when i try install anything and gives me the ERROR 266 and cant contact the phone anymore ?
Click to expand...
Click to collapse
I also bought it from HK. No problem at all.
Have you done all the steps for flashing?
Make sure that you fully understand it, there shouldnt be a problem.
Cheers...
Related
After failed update Ive decided to go back to 1.66 imate rom ( my device is imate) but whenever I try to do it it gives me error ERROR 100 - deivce ID error. imate stuck in bootlader.
TIA
C'mon people, help me out here. I've tried all roms 1.52 original, tmobile, o2 - they all give me this error! Is there a way to avoid device ID checking?
Becare full you guys!! This ROM is FULL of ****!! Upgrade is OKEY!! But DOWNGRADE or STUCK in the MIDDLE while you UpGrade it, YOU WILL GET MODEL ID ERROR!! THAT"S FREAK!! Now my XDAII is DEAD!! itsme already try to help me with program language, but i donno using what and from where? And with what kind of tools? Any body wanna HELP me out here?
I upgraded a TMobile XDA1 got the main ROM upgrade then went and tried to upgrade the radio stack. As I see from the many posts a bad thing to do. But this leaves me with a broken unit. The radio was T310. I can not see how I can solve this problem. I have an SD card, I have a friends German unit with an ENG Rom and the orignal radio which I will leave alone. How can I fix mine?
Thanks
GSM error on Bootload 1.50
Looks pretty much the same as my problem. By pressing the joystick after the error message, I get one step further, but no contact or upload of the ROM. I hope some wise person can supply an answer, :roll:
I have the same problem...
XDA O2 on Wallaby BootLoader v5.15 I see the error : "GSM ERROR"
my pda don´t start good I only see the rom version (3.17.03) and a blue wallpaper of O2..
I already update my rom but it don´t work yet !
Where can I find a GSM rom update? I'm from Portugal
What more can I do ?
Please, help me !
thanks
Joao Afonso, from Portugal
GSM Error
I have tried a number of solutions. None seem to work. If someone has the GSM rom and a solution to upload it let us know. I have tried coping a new radio version to the windows dir on the PPC, this fails. I have removed the back cover and battery again this does not work. The only alternative is to send it back for repair (expensive) or get a new one. I have looked at the solutions in the forum area and on the web but can not find an answer. The unit is an old TMobile (GERMAN) Xda. Upgraded the OS OK then messed up the radio. So as I say let me know if someone has a proven solution. Thanks.
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
GSM Error
Many thanks for the information. I have tried this but to sorry to say this does not work for me. I can get the RSUgrade.exe to load on the PDA, it stops at 1% and then hangs. The XDA was a TMobile GER unit with 32Mb. I have two units the same, I attempted to upgrade the radio on one and it failed at 10% rebooted and hung with GSM error. Since then I am at a loss as to the next step apart from throwing it in the bin.
same here
it always promt me failed flash device restart press ok. wat the hell is dis . does my gsm rom id basted?day i cant upgrde it tnx
Same problem..
.. and no solution for the GSM Error. There is no possibility to get a connect (O2 germany) and the RSU-Utility stops after 1% - always.
Please help!
Have you tried leaving it for 24 hours with the 1% on screen?
Flash failed
The problem is that there is a message "Flash failed - press ok to restart."
No possibility to leave the program..
same w u
ya i wish someone can find any sol 4 our prob. same problem w u guys.
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.
Daer all
I did try to flash my niki 100 with “flash-hardspl-niki” and the flash complete to 95% and didn’t continue ,so I disconnect the phone and try again to flash it ,but now it is showing the icon of being flash but stopping in 0% sticking in 0% and giving me message : Error (262) : update ERROR!
I have a big problem with my customer I need any advice from an expert to get the phone back working
islamov said:
I have a big problem with my customer I need any advice from an expert to get the phone back working
Click to expand...
Click to collapse
what customer?
lol
.............
you cant flash hardspl without sspl started! if you stuck in bootloader ... you need MTTY and use the command "boot" to get Windows CE up and running!
Hi got problem with my touch screen so I wanna send him back to RMA.. but 1st i need to restore original Rom..
I've tried 'RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed_NoDriver' but got error 140 (checking version probably...) anyone can help ?
edit: Solved
ooouch
What rooting way did you use to do it...onyl some rooting options are undoable but the chance u used the right way its very slim can i please know the way u used?
need to unroot my phone.. Cannot run neither RUU... WWE, DE, UK, PL... tried with different versions 2.xx to 3.xxx neither works
After reboot to bootloader I get error 131 costumer ID error... There is NO ROMs to download for Macedonia or Hungary T-MOBILE which is our headquarter
please help