[q] format sd card with bad partition - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

somehow the partition on my hd2 has become unreadable by winmo.
it *should* be fat32, but idk.
the card is not detected by the phone. I don't own a microsd card reader.
any ideas for reformatting it?

wm5storage ftw.

try this, it can scan and fix errors, should be able to find a free trial, if not there, then on handango.
http://www.softwinter.com/storagetools.html

Card readers cost just a few bucks those days, just get one and use your PC to do it.

Related

formatting mmc

can anyone please tell me how to format mmc card for xda...there's 3 options in win xp ...fat32....fat...ntfs....i cant format it from the xda , keep getting error code 31.....an error occurred while formatting the storage card folder...........thanks
Try formatting to Fat or Fat 32, however if the xda wont format it there may be a problem, make sure the "lock" switch is in the off position. I have had a problem with sd cards before, what I did was a sd backup from the xda, it then seemed to work ok, just deleted the backup and it worked ever after.
theres no lock switch on the mmc card...i've tried storage tools and flash format...the card must be buggered
i have a different problem, but im sure its connected to the formatting somehow! my card only fills up HALF way!
there is 40% more room availble, all scans prooves this, yet i cant add anything to it, im thinking, its the way its formated, was there a 'directory' limit to how many files that can exist in root?
and wasnt it related to the type of formatting? so my question is...
which format/cluster/ect... is best to fully use a 256 card? and 512/1G.?
Hello,
I actually started a topic last week concerning the same thing. i'm copying bits and pieces of it here; it also helps address your concern about which format to use and the sd card limitations. the first point below address which format you should use for the sd card; in this case use FAT. by the way, i use an sd-card reader (usb plugged) to format the card; it shows up as "removable disk e" in my laptop's window's explorer.
1) i'm using a 512 mb card; i was having some difficulty because the memory of the card would only go up to around 300. at first i thought there was a problem with the card itself so i had to constantly erase the contents to make mp3s, files, pics, mpegs, etc fit. then i stumbled upon the pc command for formatting disks; there were 3 options to format the sd card: FAT, NTFS and FAT32. when i used fat32; the behavior was the same and the memory usage would only go up to 300 max. when using ntfs; my xda2 refused to recognie the card (it wouldn't show up in the explorer app). when i formatted using FAT, everything was great. i can now use the sd card to it's limits and am no longer restricted to the 300-mb trouble i was having.
question: what's the difference in the 3 formats? i don't really know but obviously using FAT format was the best thing to do, but what's with the other formats?
2 cents worth.
cheers mates
robson
thanks Robson...but i have sent to back for a replacement....i tried it in my reader but the pc could not see the sd card...so i went out and bought a 128mb card while i wait for the new one to come....had no problems with the 128 worked straight away
thanks for the tip - from now on FAT is to be my solution
one more thing to add, I do have 256MB SD card on my XDA I and WM2003, ver 4.0.21
I can use my 256MB card to the full limit, the card has been formatted with CnetX format utility (www.cnetx.com) with FAT16 and FAT32 and apart from the fact that content has been missing from time to time, so I had to re-load the files ... when I locked the card, everything is fine now
regards,
monika
today I have tested sandisk 512MB SD card ....
I am allowed to fill it up to the full limit of roughly 484MB
I am curious about the other thing .... buying 512MB SD card for its prce it's almost a rip-off and you get only 484MB in return, I remember old times back with IPAQ + PCMCIA sleeve with inserted flash card 1280MB of sandisk - the size written on the back of the card WAS EXACTLY matching what PPC2002 was showing .... 1280MB
to me it seems like either different "disk geometry" or disk format - can anyone explain it to me pls
regards,
monika

How to format micro SD

Hi,
I would like to format my micro SD card, but I don't know how to.
I know that there is an option that says " clear storage" but it is for internal storage only ? or can format as well the sd card?
I haven't any card reader on my pc, so I have no idea about how to do it from Hermes itself. .
REgards
Sniuk said:
Hi,
I would like to format my micro SD card, but I don't know how to.
I know that there is an option that says " clear storage" but it is for internal storage only ? or can format as well the sd card?
I haven't any card reader on my pc, so I have no idea about how to do it from Hermes itself. .
REgards
Click to expand...
Click to collapse
Keep your micro sd in card reader , you can format it only from pc.(buy one card reader)
if you want format micro sd from device , you need a 3d part application , but from pc is better.
Regards
Imdantes
The resco explorer, has a format storage card utility
I have done it already, and works fine.
pocket mechanic works well, also finds errors, cleans up, makes coffee etc
If you're on XP, just right go into disc management, find the card, right click, and choose format...likely a similar method on Vista, but I haven't used it.
No third party tools needed, etc.
Edit, oops my bad, I misread that you didn't have a card reader for the pc.
Another vote for Resco explorer btw, I couldn't live without it.
Well, I got 4GB Micro SD. Formatting (FAT32) done through PC but never been possible through Artemis by any of the softwares mentioned here. The SD works fine under windows, but I gatta take it out in every new ROM or Radio flashing. Is there any way to make it being seen by Artemis DOS system?
Thanks
problem with my 4gig micro sd
hey guys...
about this topic...
i have a problem..
i have a 4gig micro sd for dopod 838 pro..
i think.. i had a virus the problem is..
i can no longer see the storage card neither on my phone nor on my pc...
how can i get to format it?..
at first it was working just fine but all of a sudden i can no longer show the sd...
what can i do?..
pls. help...
salamat!!/thanks!!/arigto!!/
nio.elsinore said:
hey guys...
about this topic...
i have a problem..
i have a 4gig micro sd for dopod 838 pro..
i think.. i had a virus the problem is..
i can no longer see the storage card neither on my phone nor on my pc...
how can i get to format it?..
at first it was working just fine but all of a sudden i can no longer show the sd...
what can i do?..
pls. help...
salamat!!/thanks!!/arigto!!/
Click to expand...
Click to collapse
Delete the folder "MSMETADATA" on your storage card and do a soft reset and that should work
Unless of course the sd card has failed... I had one or two do that... All you have, if the pc won't recognise to format, is a lump of plastic.... You'll have to get a new one...
phone no longer recognizes sdhc card
Okay, guys I flashed my hermes this morning with this
http://rapidshare.com/files/2179382...1.255.1_102_6275_1.38.00.10_108_Ship.exe.html and now it no longer recognizes any of my micro sd nor my micro sdhc cards. They come up on the computer but not on the device. I even installed the sdhc.777 cab and it still doesn't work. Help please...
refuse2bstopped, try a different os... If that doesn't work you may have a broken or misaligned pin in your usb reader on the Hermes. It may also just be dirty or have some corrosion on it. If you want to clean it use a cotton bud and some isopropyl alcohol (surgical spirits). DON'T USE METHYLATED SPIRITS... It leaves a residue.
Cheers...
sir...
im just wondering if my mini sd is busted and it has no use anymore..
why can my camera still recognize that there is still a memory card installed in to my unit that its even asking me to either save the picture's towards my unit or mmc
im just wondering if it can still be recognized by my unit can i still fix it/format it so that i could use it again...??
i know your the expert on this that's why i thought of asking you this..
thanks for reading my msg'
I like to look at things step by step
1. SD card isn't recognised by Hermes - not even detected...
2. Camera detects it - did you try taking a few pictures and seeing if it actually wrote them to the card? I had a phone that registered the card but kept throwing up "sd card corrupt" every time I tried to use it.
3. Does a PC recognise the sd card when inserted into a card reader? If you don't have 1 I'd make this a priority to get, a friend of mine bought one off ebay for $5 AUD including postage...
If the pc recognises it maybe you should reformat it fat32. remember to backup any data first...
4. If the pc and camera have no problem then I'd start suspecting the Hermes... I have two sd cards so I have no problems testing but you may need to either get a smaller card - I use a 512 for flashing the os, or find someone who can lend you theirs to test. If the 2nd card reads then either the card is bung or the Hermes has a problem with it (incompatibility has been known to happen). Clean the card reader as best you can with isopropyl alcohol and a piece of cloth. There may be some type of corrosion or dust on the sd card reader contacts.
These are the steps I have taken to work out if the sd card or Hermes is a fault. Generally I find its the card (happened once to me and once to a friend).
Hope this helps...
Cheers...
Been through this. Very recently, actually. Like, last night.
I don't have a microSD reader and I found myself needing to reformat my microSD in my Hermes to FAT32. I was trying to do SD flashes. Long story.
Anyway, know what I did? I used WM5torage. As long as your ROM is functional and your SD card isn't wasted, activate WM5torage and have WinXP format your "USB Mass Storage Device" for you through My Computer. It only affects the SD card.
I mean, it worked for me.
sd 2gb
i have i sd 2gb card, my pc can see it and use it but only on fat format. i cant format fat32, i get an error(not able to complete). i cant see or use it at all on my phone. (the only selection i have to format (on my pc) is fat,fat32, default unit size)
please help, so i can use the card on my pc and phone
edit:i have searched and the only thing i saw was prog. to format sd, that prog let my pc to see the card, but lost the ability to see it in my phone. (sorry i dont remember what the prog was)
A very good (shareware) 3rd party programm comes from softwinter (storage tools)
rgs
If the PC picks it up, right click on the sd card and select format. Make sure its fat32 though. Easiest thing to do... NO 3rd party apps needed...
i guess i wasnt clear enough. my pc comes up with an error "not able to compleate" when i try to format my card in fat32 (that is when it is in my pc), but i can format fat (but thats no help for me). if i put the card in my device, it doesnt see it, so if i link my device to pc, pc doesnt see the card. so still cant format via pc.
i tried 3rd party as noted, as i thought, if my device cant see it the app cant see it.
thanks for trying, but still in the same boat.
it is a new card too, im woundering if i bought a bum card and i should return it for a new.
any suggestions welcome
Reboot pc then try again... I've had this happen too and a reboot seemed to fix the problem. Just a psychotic computer problem...Sometimes pcs can be..... TROUBLE..
Cheers...
i tried that again, still doesnt work. but i did see autoplay run this time, i think that may be my prob.. 2 progs. trying 2 run on the same source at the same time. now trying to find a way 2 shut it off (like i really need it anyway)

Did my Touch Pro eat my SDHC?!

I think my A-Data 8GB Class 6 SDHC is hosed. Is there anything else I can try before I have to purchase one? This is what I have noticed and done to try and resolve.
I cannot write anything to the card. However, I can read from it. I’ve tried deleting folders and files. They show they are deleted; however, when I take out the card and reinsert it shows back up. It does not show up as a drive when I hook it up to a card reader. Disk Management scan showed nothing. When I connect the Touch Pro to the laptop as a drive instead of Active Sync, the storage card does not show up. I can go through the File Management in the Windows Mobile app and see the storage card. Format is not available. A friend with an Android tried reformatting it and it just sat there. He took it out and resinerted his and it started formatting his card.
Is there a format program to use on the phone (searching now)? Is it time to buy a new SDHC?
ETA...I just installed FlashFormat from cnetx. Received "No storage card detected". Is there another good flash program?
You can try a card reader in your pc (ether built in or USB) to format the card. if you need help let me know.
btw a good program to format anything on windows is called swiss knife and its available for free here:
http://download.cnet.com/CompuApps-SwissKnife-V3/3000-2248-10070864.html?part=dl-CompuApps&subj=dl&tag=button
Yep...I tried a card reader to my laptop. XP did not see the card. However, I tried a different card and it showed up.
I will look at swissknife.
Swissknife does not see the card.
I ordered a new card.

[Q] Formating Micro SD Card

So my S3 Pebble Blue is on it's way & I want to put all music & stuff on to my 64Gb Micro sd card.
Do I....
1: Format on the pc, if so which format & would the S3 still want to format when I put it in.
2: Format it in the phone & then remove & insert in to PC to transfer all my music & stuff?
I am familiar with android & formatting micro sd cards. I just wondered if being a 64Gb would be a different matter.
Ta
Just format in phone.
Michael_P said:
Just format in phone.
Click to expand...
Click to collapse
Cheers Matey
I also just received my SGS3 and inserted the SanDisk 64gb micro sdxc card.
I didnt format it, because it just seemed to work fine without formatting. Now I put all my data on it, but after a restart of the phone the card is suddenly corrupted...
In my phone it recognizes the card, but says its corrupted and needs to formatted. It then ejects the cards for safe removal. In my pc it doesn't recognise the card at all.
Does anyone have an idea on how to recover the data on it?
And what is otherwise the best way to format it?
Thx
RE:- 64GB MicroSDXC errors
I would use a external compatible Micro SDXC reader and connected it to your computer and try and recover the card on the PC. (first)
i) what operating system are you using on the PC.
ex-fat format problem in windows xp. If you have windows 7 it should be able to read ex-fat cards natively.
If you have xp you can try and install the
search for the knowledge base article 955704 on Microsoft Technet support package to enable xp to read ex-fat cards.
In the past I have used my external 9 in one reader to fix corrupted cards to recover the files from them using recuva or similar software it will restore the files onto your pc hard disk.
let me know how you get on.
Thanks a lot for the quick advice.
I don't have an external reader yet, so I ordered one just now. I have win7 on my pc, so I guess that will be ok. I'll try it later this week when I have the reader in.
Once I have it recovered (or not), what is the best practice for setting up the card? What's the best way to format it?
MrHans said:
I also just received my SGS3 and inserted the SanDisk 64gb micro sdxc card.
I didnt format it, because it just seemed to work fine without formatting. Now I put all my data on it, but after a restart of the phone the card is suddenly corrupted...
In my phone it recognizes the card, but says its corrupted and needs to formatted. It then ejects the cards for safe removal. In my pc it doesn't recognise the card at all.
Does anyone have an idea on how to recover the data on it?
And what is otherwise the best way to format it?
Thx
Click to expand...
Click to collapse
Free PC program Recuva http://www.piriform.com/recuva mount via USB or scard adapter.
Or even try Hexamob (need root) our some other file recovery app
When done, best and easiest to format through phone.
Sent from my GT-I9300T using xda premium

SD card is damaged - Try reformatting it

I had had a SanDisc 32 GB class 10 and everything was ok, until the time in which I needed more than 30GB in my HTC Desire X. So, I decided to buy the Kingston microSD 64 GB class 10. Even though our phone has official limit at 32 GB, after googling I noticed that I would not have problem with this card. So I bought it.
From the begin I had a few problems. Very often, about 2-3 times every day, it was required to unmount - mount the card for reading some files or for renaming them.
... it was not big problem for me. But from yesterday, I cannot have access to the sd. I see a message Damaged SD card, SD card is damaged, try reformatting it. And if I try reformatting it, nothing happens. Also in settings - storage I cannot mount the card, and I just see that SD card is unavailable...
What I have to do now? To try a format from windows 7? If so, what format? Fat32, ntfs or something else?
Maybe it is better to use the warranty?
Thank you in advance...
For sdcard, try to format to fat32 (should work either using gparted or windows format tools).
try to format your sdcard with the offical tool from the sdcard association:
https://www.sdcard.org/downloads/formatter_4/
if you wanna format your sdcard the right way, THIS IS THE TOOL TO GO!
The SD Formatter was created specifically for memory cards using the SD/SDHC/SDXC standards
if you still have problems, try to get a replacement from your dealer or sandisk directly.
if that doesnt help, try a different brand like kingston, samsung, etc....

Categories

Resources