help me i have s310
when i installing rom windows . my computer is shutdown and stop
my pda windows hang in winlogo
As the ROM update seems to be broken in the OS part, you need to get the device in bootloader mode and restart your flashing in that state.
To get it forced to bootloader mode:
1.) push and hold the camera key
2.) insert USB cable (keep camera key pushed)
3.) wait until white screen appears
4.) release camera key
-> 3 color screen should appear
Restart your flashing now.
This is how it works for all (at least those I had) HTC devices in that scope.
Good luck
Related
I tryed to upgrade the rom in my htc hd2
I followed the instraction
first I did (HSPL3_PKG) to remove the security
then I cleaned the rom by (Tsk29 provided by doloop)
then It release (ruu)
after that the device stop working (wait for long time) no respond
then I Tends battery to turn the device off
then put the battery back and long press on the red botton to turn on the device
it boot for short uptell white screen and stop booting
I did the final step many times but no responding any more
when I connect the device to my labtop it gives an erorr (260) connection
could any one help my to fix my device
thank you
yagahrhm said:
I tryed to upgrade the rom in my htc hd2
I followed the instraction
first I did (HSPL3_PKG) to remove the security
then I cleaned the rom by (Tsk29 provided by doloop)
then It release (ruu)
after that the device stop working (wait for long time) no respond
then I Tends battery to turn the device off
then put the battery back and long press on the red botton to turn on the device
it boot for short uptell white screen and stop booting
I did the final step many times but no responding any more
when I connect the device to my labtop it gives an erorr (260) connection
could any one help my to fix my device
thank you
Click to expand...
Click to collapse
Hold the volume down and power button at the same time. Take a picture and show us what is looks like.
So I've had this Nokia Lumia 800 gathering dust in a box because I could never figure out how to restore it.
I'm guessing it's corrupt firmware or something but I know it's a common fault on this phone.
It's just stuck on start screen with the NOKIA logo.
It does sometimes bring up the no battery symbol, just a battery with one red bar in the middle of the screen and then windows trys to install drivers for it, so I guess it's recognized to some extent (fails to install drivers)
Does anybody have any ideas on bringing it back to life?
The phone was never rooted or modded
UrbanDesigns said:
So I've had this Nokia Lumia 800 gathering dust in a box because I could never figure out how to restore it.
I'm guessing it's corrupt firmware or something but I know it's a common fault on this phone.
It's just stuck on start screen with the NOKIA logo.
It does sometimes bring up the no battery symbol, just a battery with one red bar in the middle of the screen and then windows trys to install drivers for it, so I guess it's recognized to some extent (fails to install drivers)
Does anybody have any ideas on bringing it back to life?
The phone was never rooted or modded
Click to expand...
Click to collapse
You can try these (2) methods...
Method 1) Note If your phone is currently stuck on the manufacturer's logo, Disconnect your phone from the USB cable.
Hold the volume - and power buttons to turn it off. After your screen goes black, quickly hold only the camera button AND connect the USB cable to your phone and computer...before the phone vibrates and starts back up to the logo.
-------------------------------------------------------------
Continue holding down the camera button until you see the connect-to-computer screen.
-------------------------------------------------------------
Release the camera button.
Leave the phone restart alone, then wait about 4/5 minutes .
==========================================================
Method 2) What u need:
Google this and download : Nokia Care Suite
Next step:
1. Open Program files (x86) -> Nokia -> Nokia Care Suite -> Application louncher -> bin -> ApplicationLauncher.exe
2. Choose PRODUCT SUPPORT TOOL FOR STORE
3. Take a Nokia Lumia 800. Turn it OFF. HOLD VOLUME+ BUTTON and Connect to pc with usb cable. Release when it vibrates.
4. In PRODUCT SUPPORT TOOL FOR STORE press PROGRAMMING-> RECOVERY.
5. Next step Press: FILE -> Open product.
6. Choose the RM-801 product. Press open. Wait until it loads. Dont take care if shows in corner some errors.
7. Press START.
Wait for the Phone to flash and restart. [After flashing connect your Nokia Lumia 800 to charger and wait first it shows: Battery with red indicator, then NOKIA logo, after 2-5 minutes phone will boot up 100 %].
...Thats it
I think this should work for people who cannot get into recovery mode, computer cannot detect the phone or have security error message.
How I bricked my LG-E450b
I thought rooting for this phone was like my Samsung phone, so I installed Kingo-oneClick-root, got root and deleted all of the bloatware.
Little did I know that I could actually brick my phone by deleting some LG apps (Stupid LG).
Symptoms of my bricked phone
Secruity error message
Phone would not be able to go into recovery mode (Volume down + Camera button + Power button). It would restart after 3 seconds or so after the android loading gif.
Phone would not be detected by the computer
LG support tool could not detect phone (since computer cannot detect phone)
LG support tool would stop at 4% when trying "upgrade recovery"
I was basically stuck and thought my phone was hard bricked. So I started playing with the phone hoping for some magic thing to happen and I got lucky!
How I fixed my issues
Remove case and connect the phone into the computer with standard usb cable
Power into recovery mode (Volume down + Camera button + Power button)
Just before the phone displays the security error, remove the battery (phone still connected to computer).
Put battery back in and turn on the phone normally (no recovery mode)
If it worked then there should be a white message on the bottom left of the phone saying "Download mode: "
Optional: If the computer shows that the device attached has an error then you are in the right direction! Go into device manager (run devmgmt.msc) and right-click on the device that is not detected and uninstall
Optional: Hold power button until the device shuts down and repeat from step 2, the next time you get into download mode the computer will detect your device
Open the LG Support Tool (almost done) (attached in this other forum post)
The phone should get detected by by the LG support tool. Try to update the firmware. If the Support tool says that you already have the latest firmware then go in Options->Upgrade Recovery and put the model number or IMEI/ESN/MEID of the phone and click ok; the recovery process will start and your phone should work
Note: If the phone is not detected by the LG Support tool, then it will not work (it will stop at 4% when doing the upgrade recovery). The phone has to be detected for this to work.
Conclusion
These are things that worked for me, but I am no expert. This is not a full proof guide and I am only posting the steps that made the phone work. It might possibly be that you don't have to do all the steps described above to get into download mode, i.e you would just have to remove the battery at the right time to activate the download mode.
I am posting this describing the exact steps I took, so this can hopefully work for someone else.
Good luck!
TL,DR : Remove battery just before the security error message and reboot phone to get into download mode.
Why this phone causing so many issues?
I'm was search how to fix this, but nothing doesn't work.
I have no idea what to do, and now I creating a new thread, maybe somebody can help.
Let's start.
I HAVE SECURITY ERROR when phone power on. After message disappear, screen goes down..
- No bootloader unlocked
- No rooted
- No usb debuging enabled
- No custom rom
- No custom recovery
This is the first time connecting with PC (Windows 10) and
- No driver (this is the most important issus)
I tried some drivers and installed but because phone only show error and go to shut down I don't know is this drivers working...
- Can't run fastboot
- Can't go to safe mode/recovery mode
- Can't do hard reset with hotkeys
The first thing is driver, while PC doesn't see phone I can do nothing.
Another important thing is that I cant do to safe mode. Without safe mode I cant do fastboot and flashing.
So maybe someone can help?
The Security Error means you installed an unsigned image on a device with a locked bootloader. You have to flash the original firmware following either this or this guide. You can get out of the security error by just flashing a signed recovery with fastboot, too.
EdwinMoq said:
The Security Error means you installed an unsigned image on a device with a locked bootloader. You have to flash the original firmware following either this or this guide. You can get out of the security error by just flashing a signed recovery with fastboot, too.
Click to expand...
Click to collapse
I can't put phone in download mode. Doesn't work.
Nothing happening. Only show Security error on the screen.....
When connect with usb charger phone dones'n charge.
----------------------------------------
Put the phone in download mode:
Jellybean bootloader:
Turn off the phone, remove the battery. Put the battery in, hold volume up+down and plug in the USB cable, after 1 second of the USB cable being plugged in, let go of volume down, keep your finger on volume up until you see S/W Upgrade. If you see the LG logo you failed, repeat the step again.
ICS bootloader:
Hold Volume up + down while plugging in the USB cable is the method I think.
--------------------------------------
Volume up OR down, I always forget that.
After a failed attempt to invoke DL mode and switching phone off(hard reset usually), toggling the phone's power once increases the chance for success next time. Same as taking the battery out each time.
After the restore of the stock rom phone should reboot. If it shows the stock recovery's screen instead, phone will be instable later and might brick when trying to root it. Then repeat the flash process and it should boot now.
Just remove the battery, put it again, then hold Vol UP and while doing that plug in the USB. You're now in Download mode.
Hello,
I'm going on again on my WP15 which is on bootloop after trying to put an magisk patched rom to obtain root.
The objective now is just to put a official factory rom (which I downloaded from the official website for the right model)
The problem now is not how to do that but how I can connect the phone to the computer because :
Assuming that the phone is connected via usb-c to the computer on usb-a and the phone is on.
1 The screen is black
2 windows connect sound
2.1 Com port connected (device manager)
X wait 1s
3 windows disconnect sound
3.1 com port disconnected (device manager)
2&3 x2
4 Screen on : On screen :5G oukitel logo + android logo + Orange state; devive unlocked[...] not trusted[...]; device will boot on 5s
repeat 1 indefinitely
Please Note :
That I do not have ADB access since I switched from w10 to 11 so the rsa keys are not valid.
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
The phone is only off when out of battery, As soon as I connect a cable the phone turn on and I can do nothing except disconnect cable and wait (Can be very long with an 15000 mAh battery...)
There is absolutely no custom bootloader so no twrp or any custom recovery/installation bootloader.
With that... I think it's definitely bricked... I'm already thinking of soldering a new rom (or asking someone to do for me)
If you need more details or precisions tell me !
Thank you in advance !
Lunalunea said:
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
Click to expand...
Click to collapse
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
vxsw said:
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
Click to expand...
Click to collapse
Hello,
Sorry, I was not very active since this post and I abandoned for a very long time.
But ! Your instructions was good and I finally got my phone back to life !
Since then I realized that the Oukitel brand is very sketchy about theirs ROMs on the Oukitel website because the WP15 model is associated with the WP13 ROM on the download center so... WHY ? this is so confusing because now I have a WP15 advertised ROM (From a website... Yes... I know I was dumb to do that) and it's working yes... but this is very buggy for example the gyroscope is crazy or my MAC address is never the same even if I turn the built-in MAC address spoofing option off...
I will do some research just to get my phone as normal by doing it as clean as possible because I know now what is implying for doing that.
Thank you so much for your patience and especially for your guide and I apologize for my dumbness.
Lunalunea said:
the WP15 model is associated with the WP13 ROM on the download center
Click to expand...
Click to collapse
have no idea what are you talking about.
just checked in dl center on oukitel official site and seems all is ok. wp15 have it's own fw page and redirect to correct dl fw page, wp13 have it's own.
you can't mix up fw, in case wp13 signed exactly as wp13:
v318a-oq-s88-128g8g-bom2-hdp-r0-cts-eu_OUKITEL_WP13_EEA_V12_20210731_user_20210731.tar .gz
wp15 have no direct sign, but it have a cpu defenition:
TF919_OQ_S89_6833_R0_EEA_V1.9.7.2_S211014 .zip
i.e. mt6833 aka dimensity 700. wp 13 have a dimensity 800 aka mt6873
nb, in dl center, fw tool seems not works properly, so you must use a flashtool as I'd referred before.
I've tried everything, for 5 full days, then had no option left but to give up. Sorry.