I Recently replaced the Lcd screen and digitiser on sony ericsson x10i. but i still can't get it work.why?how to calibrate the Lcd screen?
Don´t need to calibrate.
If you replace it, everything have to work without calibration or something else.
Related
Hi boys,
yeasterday I changed digitizer on my Xperia PRO mk16i, which was broken, but still fully functional.
Now I have problem with this new - in the middle of LCD it´s don´t read my touchs. In the top and bottom of LCD is situation better - it is almost functional.
I found some recalibration functions, but it´s no possible via standard phone menu. So I tested change firmware with Flash tool. I tested A 2.3.4 and 4.0, but everything is bad - I cannot found any calibration function. (When I bought my phone, first thing which I must do was calibration).
Please, can you help me? What I must need for run calibration process?
Many thanks,
Petr
Wow, I've never heard about touch calibration on capacitive devices. I'm pretty sure your new digitizer is defective. Happens to the best of us hehe.
I have similar problem with this guy. Middle of the screen doesn't read my touch, I'm using mini pro. My case I hold my phone with wet hands, then the day after, it happens. Flashed to stock didn't help. It seems your digitizer is defective as said. Take the phone to where you changed the digitizer and ask for warranty.
Sent from my MemoPad
I replaced a gen 2 digitizer and LCD on my nephews Nabi 2. Everything looks good, however the touchscreen is way off! Is there a way to calibrate it if not how do I fix this problem! I've tried a factory restore and still nothing.
Hi, i have changed cracked lcd screen on my Z2. With new screen sensitivity became very unacurrate. When texting needs to touch exactly on a symbol. Is it faulty screen or is it possible to fix it with some calibration software? Thank you
Hi,
Trying to fix a Z2 for a friend. She dropped it, smashed the screen. You could still see the LCD, but the digitizer was fubar. Ordered a new screen assembly, but after the replacement only the LED backlights work - no LCD at all. To test, I reinstalled what was left of the old screen, and no LCD, just backlight, so I don't think it's the new screen. So then I ordered a new main ribbon cable and replaced it. Same result: no LCD, just backlight. You can hear the phone on when it's on, the phone "responds" when you touch the screen, you just can't see anything. I upgraded to the latest software update tonight using PC Companion, but no change.
So, the only thing left is the motherboard, right? I know there is a fuse on the motherboard that, when it fails, it kills the backlight and leaves you with only the LCD. I have the opposite problem. I'm hoping maybe there is something like that for the LCD??
Thanks in advance,
Heath
I have same issues with you and also try ten new lcd all show backlight only..what your solution??
Have you tried to connect it via a MHL cable to TV ?
Hey guys, recently I had my Z2 sent to a service shop because it wasn't turning on or charging. The guy at the shop said that it was the battery fault and he changed it, but he also told me that the screen was not working( flickering, ghost touches, unable to work on it). So he put my old battery on and when I went home the phone actually turned on and booted up, but still I had the screen problem. So whenever I touch the screen it doesn't respond and it touches by itself. Tried putting it on rice for 20 hours, dried with a hairdryer and assembled dissamssebled the screen jacks, still the problems wasn't fix. Do I really need to change the whole LCD or is this a problem that can be fixed?
Shawiee said:
Hey guys, recently I had my Z2 sent to a service shop because it wasn't turning on or charging. The guy at the shop said that it was the battery fault and he changed it, but he also told me that the screen was not working( flickering, ghost touches, unable to work on it). So he put my old battery on and when I went home the phone actually turned on and booted up, but still I had the screen problem. So whenever I touch the screen it doesn't respond and it touches by itself. Tried putting it on rice for 20 hours, dried with a hairdryer and assembled dissamssebled the screen jacks, still the problems wasn't fix. Do I really need to change the whole LCD or is this a problem that can be fixed?
Click to expand...
Click to collapse
Yes, you have to change the screen, or more precisely, the digitializer.
But since the LCD and the digitialier come in one-piece, you have to change it as a whole, but at a much lower price, as your screen can be sold again and recycle the good LCD panel.
iXaidyiu said:
Yes, you have to change the screen, or more precisely, the digitializer.
But since the LCD and the digitialier come in one-piece, you have to change it as a whole, but at a much lower price, as your screen can be sold again and recycle the good LCD panel.
Click to expand...
Click to collapse
So replacing the LCD would fix the problem right? That's great then because I found an LCD with a very low price (20$), completely new on ebay and I sucessfuly dissassembled the old LCD out of the phone. I'm gonna buy it as soon as possible. Thanks man.