Related
Hello!
I did something really stupid. I rooted my Vibrant, and all was super easy and fine, but my home button was being unresponsive so without thinking enough did a reset on my phone. I wanted to make sure I covered my bases so I downloaded Titanium Backup and "backed up" all of the important things....call log, contacts, browser history, etc. etc. then did the master reset, but I don't think it worked. So now that I have done the reset it gives me force close messages on all of the main functions of the phone....dialer, web, you name it. Plus my home button still isn't working :/
So, the way I see it I have two options; risk sending the phone back to t-mobile under the guise of the home button issue....and maybe pay dearly for it (Superuser is still in the apps)
OR....
Hope and pray in the power of the XDA Gods, at least in order to get this to the workable category.
Thanks for any advice!
Are you able to get to the "Terminal Emulator" without it FCing?
You could boot into Clockwork Recovery and flash eugene's STOCK rom to see if that fixes anything.
hmmm, there's only the superuser and then the preinstalled apps. i did the one click root, so maybe that was missing the terminal app?
twag said:
hmmm, there's only the superuser and then the preinstalled apps. i did the one click root, so maybe that was missing the terminal app?
Click to expand...
Click to collapse
No its not missing, the "one click" just does rooting for you. You have go to into the market and download the application "Terminal emulator," if you're able to get that then you can unroot yourself and exchange your phone without T-Mobile ever finding out that you rooted. Or you could try flashing a stock ROM with Clockwork Recovery
got it! unfortunately though, every time i click market i get the force close :/ Meanwhile, I downloaded the clockwork recovery, but I'm definitely new to this, so where would I wanna go from there?
Thanks a lot by the way
twag said:
got it! unfortunately though, every time i click market i get the force close :/ Meanwhile, I downloaded the clockwork recovery, but I'm definitely new to this, so where would I wanna go from there?
Thanks a lot by the way
Click to expand...
Click to collapse
Get Terminal Emulator as well; where do you want to go from now? You want to try to troubleshoot this problem or just unroot the phone and exchange it
Edit: Figure ill just make it easier.
If you want to troubleshoot: http://forum.xda-developers.com/showpost.php?p=7329357&postcount=2 is what you're looking for. Follow those instructions and your problems will most likely go away.
To unroot
Code:
su
rm -r /system/app/Superuser.apk
rm -r /system/xbin/busybox
rm -r /system/bin/su
Also remove apps that require root access.
Either one will do the trick. I would go with troubleshooting, the directions are simple. If it doesn't work then.. unroot and make sure that all the bloatware is there + no root applications so they wont be able to tell.
Here dude. It seems you can not download terminal emulator from the market, so here it is with the root file for good measure. Only thing is I hope you have a way to download it and get it to your phone. Gl, and let me know if you need any more help.
Just making sure we're on the same page.....so you meant to install clockwork on my computer right?
My market FC's every time i try to go in there.
Any way that I can at least get this guy to fly in under the warranty inspection radar and be functional is the way I'm wanting to go. should i attempt to load the files from the clockwork program into my phone? Sorry I'm so fuzzy on this.
One click root and unroot here http://forum.xda-developers.com/showthread.php?t=746129
twag said:
Just making sure we're on the same page.....so you meant to install clockwork on my computer right?
My market FC's every time i try to go in there.
Any way that I can at least get this guy to fly in under the warranty inspection radar and be functional is the way I'm wanting to go. should i attempt to load the files from the clockwork program into my phone? Sorry I'm so fuzzy on this.
Click to expand...
Click to collapse
If you can follow directions good, this post should solve your problem. http://forum.xda-developers.com/showthread.php?t=747634&page=2
Hey bro, here is a simple fix.
Download ROM Manager which I attached below and install it. Within ROM Manager you will have a option to install Clockwork, so go ahead and install in through ROM Manager. ( Clockwork gets installed on your device ). Then follow this link http://forum.xda-developers.com/showthread.php?t=740077 to download a stock Vibrant Rom. Follow the instructions on how to install the ROM, and you should be good.
Forgot permission for "unknown" in superuser app
Ok, so I accidently tapped forget for the "unknown" in super permissions and now when I try to type su in adb shell it says access denied. Any help?
I ve tried about 4 imulaters none will open.then I thought I had found the aswers to one of my issues, getting terminal imulator to work. But after ive installation and reboot just for good measure. I get the message that I cant install apps connected to the market. Im thinking maybe I should try unrooting and resetting the imei. Is there another way?
if youre getting a lot of fc errors, then odin back to JFD. make sure to use the .pit and .tar files. you'll be on official stock. then you can root/ update to official. anyway, its never a bad idea to go back to complete stock after major errors.
I tried this emulater su removal thing but it said that none of those fials exist. I am clearly rooted with su. Could it have something to do with my 17 digit imei cant seem toswitch back?
No and you seem to be pretty clueless to what they are suggesting you do. The easiest way to fix most problems with FC. Are using Odin to flash the OS back to stock. Several guides in the bible. Look under android development for the vibrant bible.
Maybe I should elaborate my issues so I dont seem so clueless, I dont have sync! I have tried kies, and odin but does didly squat w/o sync.
I dont have market access or OTA support. I just got back terminal after about 15 tries.
So im basically try to see which I get first; unrooted or stock reset. All of which seem to have some OTA necesity unless I can find a complete APK or termina access deal. Yea im a noob to
If your going to do anything to your phone such as rooting you need to download odin. There is a tutorial in the dev section under the vibrant bibal. Odin will restore your phone back to stock like it was out of the box. There are plenty of ppl willing to help on these forums so if you run into problems just ask. Every time I thought I screwed up my phone odin has saved my life.
Sent from my SGH-T959 using XDA App
I bought GT-I9000M, Froyo, 4 days ago, brand new unlocked from store. I had a problem getting GPS to work. Searching for a fix on the web, I got inundated with all kind of info,. Not only on GPS fixes, but on comparing, updating, rooting, flashing, unlocking, APP's and other issues with my Galaxy s. So, after reading quite a bit, I decided to update or flash my phone to the latest (assuming that will solve GPS problem and all other issues). As a newbie to Android software which I was about to temper with, I selected androidadvices.com to guide me. I had read very carefully and I followed instructions meticulously to flash 2.3.4 XXJVP. but it did not work. then the phone did not start and I got the little mobile and pc with triangle in between sign. I still could get to download mode. I tried to repeat the process many times, but got same results. it halted after it started to load bin file. I consulted the so called expert at androidadvices if the I9000M differs from I9000 and if could that be the reason for what happened. HE did replied promptly "YES" and advised to take it to service center. I searched a little more on the web with other language and I found a tip about omitting pit file (using Odin). Tip worked fine and flashed to XXJVP. Please do not congratulate me yet. Now the phone starts showing I9000. I did not only lose M, but it is network locked. Getting back to the so called expert to ask him if it's a good idea to upgrade or rooting (as he described in his instructions) to 2.3.4 XXJVQ to solve the problem. Also I meant to publish what happened on his site to save other newbies from believing what he writes. And his answer was "YES" again. Now I know the trick how to use Odin by omitting pit file, I did flashed to XXJVQ. Unfortunately, the galaxy s still locked. By that time, with no search, I already know that XDA forum from their tens of Youtube videos and links on every galaxy s site for their unlocking techniques. I'm sorry I'm trying to make this story short, but I can't for I won't feel well if someone trying to help asks me "did you do that?". However I tried everything I could, using Generate Unlock and SIM less methods, on XDA to unlock, yet no luck. I logged on a site I do not recall the address and up loaded the nv_data.bin.orig and entered 8 digits twice for unlock and unfreeze. I got back the message "the file is smaller than it should". the file was 4MB. I paid for unlock code from unlock-freedom.com 2 days ago, which promised to send code within 12-24Hrs. Yes the store I bought it from is finally open today. I went there and he plugged it to laptop hooked to USB unlocking device. He tried many time and ending with the message unlocking successful on the unlocking app. Yes you got it, the Galaxy s I9000 previously I9000M still locked. On the bright side.I have Gingerbread 2.3.4 XXJPQ installed and if I dismiss unlocking screen I can log in my email. Any help from a real Expert!!!!! will the unlock code, if I receive it, solve the problem. will I ever have my new phone working again????
theothman said:
I bought GT-I9000M, Froyo, 4 days ago, brand new unlocked from store. I had a problem getting GPS to work. Searching for a fix on the web, I got inundated with all kind of info,. Not only on GPS fixes, but on comparing, updating, rooting, flashing, unlocking, APP's and other issues with my Galaxy s. So, after reading quite a bit, I decided to update or flash my phone to the latest (assuming that will solve GPS problem and all other issues). As a newbie to Android software which I was about to temper with, I selected androidadvices.com to guide me. I had read very carefully and I followed instructions meticulously to flash 2.3.4 XXJVP. but it did not work. then the phone did not start and I got the little mobile and pc with triangle in between sign. I still could get to download mode. I tried to repeat the process many times, but got same results. it halted after it started to load bin file. I consulted the so called expert at androidadvices if the I9000M differs from I9000 and if could that be the reason for what happened. HE did replied promptly "YES" and advised to take it to service center. I searched a little more on the web with other language and I found a tip about omitting pit file (using Odin). Tip worked fine and flashed to XXJVP. Please do not congratulate me yet. Now the phone starts showing I9000. I did not only lose M, but it is network locked. Getting back to the so called expert to ask him if it's a good idea to upgrade or rooting (as he described in his instructions) to 2.3.4 XXJVQ to solve the problem. Also I meant to publish what happened on his site to save other newbies from believing what he writes. And his answer was "YES" again. Now I know the trick how to use Odin by omitting pit file, I did flashed to XXJVQ. Unfortunately, the galaxy s still locked. By that time, with no search, I already know that XDA forum from their tens of Youtube videos and links on every galaxy s site for their unlocking techniques. I'm sorry I'm trying to make this story short, but I can't for I won't feel well if someone trying to help asks me "did you do that?". However I tried everything I could, using Generate Unlock and SIM less methods, on XDA to unlock, yet no luck. I logged on a site I do not recall the address and up loaded the nv_data.bin.orig and entered 8 digits twice for unlock and unfreeze. I got back the message "the file is smaller than it should". the file was 4MB. I paid for unlock code from unlock-freedom.com 2 days ago, which promised to send code within 12-24Hrs. Yes the store I bought it from is finally open today. I went there and he plugged it to laptop hooked to USB unlocking device. He tried many time and ending with the message unlocking successful on the unlocking app. Yes you got it, the Galaxy s I9000 previously I9000M still locked. On the bright side.I have Gingerbread 2.3.4 XXJPQ installed and if I dismiss unlocking screen I can log in my email. Any help from a real Expert!!!!! will the unlock code, if I receive it, solve the problem. will I ever have my new phone working again????
Click to expand...
Click to collapse
Ok that was pretty long and slightly confusing. But I think you lost your unlock yes? Have you tried Helroz's Galaxy S Unlock app from the market?
Thank you for replying, I'll be more than delighted to clear your confusion. The answer I coulld not try Helroz's for it's like some other methods require to gain access to efs folder. I don't have folder named efs. and the only file I found browsing internal sdcard whether through PC or Myfiles icon on mobile was nv_data.bin.org with another file called devicefriendlyname.txt with rest of regular folders like sovx and android. all under: /mnt/sdcard as it shows in the phone.
theothman said:
Thank you for replying, I'll be more than delighted to clear your confusion. The answer I coulld not try Helroz's for it's like some other methods require to gain access to efs folder. I don't have folder named efs. and the only file I found browsing internal sdcard whether through PC or Myfiles icon on mobile was nv_data.bin.org with another file called devicefriendlyname.txt with rest of regular folders like sovx and android. all under: /mnt/sdcard as it shows in the phone.
Click to expand...
Click to collapse
need root explorer to see efs files
could you please through a download link to root explorer
.....................
RE: Helroz
Ok I feel like we have real experts here. I installed Helroz smoothly and run it but I got the following message:
It's possible you have problem with busybox, please install it or fix it.
So, what's next great guy's? I guess I need a root explorer and busybox !!!
theothman said:
Ok I feel like we have real experts here. I installed Helroz smoothly and run it but I got the following message:
It's possible you have problem with busybox, please install it or fix it.
So, what's next great guy's? I guess I need a root explorer and busybox !!!
Click to expand...
Click to collapse
dont know anything about unlocking phones lol
can get busybox from market for free though i think, try that
Dear Kyle51
Thank you
I download the .apk file but I can't open it. what to do next?
theothman said:
Dear Kyle51
Thank you
I download the .apk file but I can't open it. what to do next?
Click to expand...
Click to collapse
should be able to go on to the app and pick what version to install, 1.17 or 1.18 i think show up
i tried changing TW launcher through sgs tools on simply honey but it said i didnt have busybox installed so i installed it and picked the newer version but still said i didnt have it, so dont know if i did something wrong
kyle51 said:
should be able to go on to the app and pick what version to install, 1.17 or 1.18 i think show up
i tried changing TW launcher through sgs tools on simply honey but it said i didnt have busybox installed so i installed it and picked the newer version but still said i didnt have it, so dont know if i did something wrong
Click to expand...
Click to collapse
No Way I think you chould replace your TW launcher with your TV guide and look for the cable guy movie
I have a problem here installed busybox and ran it to get the following;
Root not found!
the su binary was not found on your phone. this application will not work since your phone is not rooted
Then I press OK to get:
Status: looking for Busybox....
Your phone is not rooted
you used root explorer ?? so you must be rooted
i tried restoring app with titanium and it said i wasnt rooted so i rebooted and then it worked
try that and if not then try the super one click root method
Ready to donate and hit many thanks
Yes it's me again. still trying.
can anyone write happy ending to this endless story. but please consider I'm A NOOB not anything less than that. meaning I'm not familiar with most of terms and expressions you are using here.
However, if you are following this annoying story from beginning, I'm facing a dead end again, but i know there is great hope considering the following:
I have decided to start clean so I followed instruction in this thread (NOOB GUIDE: HOW TO ROOT/ODIN/FLASH/RECOVER ** 04/28/11 W/ Videos **).
I did every thing as it should be I believe, but I'm stock half way. Phone now flashed to stock T959UJFD (I'm glad now I can say that since I know what stock means) but shuts down as soon as I plug USB cable???????
I have update.zip file on internal SD not the 2GB external.
Also have the Rom of my choice zip file (Trigger 3.2) on internal SD.
Oh I also have SuperOneClick. And Odin 1.7
tried too many things like flashing without reparation or without reboot. tried also to flash some 2.3 Rom versions. and they do work well as I saw. Only one main problem I can't root the phone (meaning I can't see efs folder to unlock phone) which what I have to do since I locked it while trying to fix GPS, in case you are not following from the start.
I also have a very light nice functional stable Arabic Persian Rom. as a matter of fact, I do not know how, but with this version of Rom the phone was able to receive calls and sms. half locked
Thank you Kyle for trying and I believe I have to hit the thanks button for you
I'd really appreciate any help to end this rather entertaining story.
dont know why it goes off when usb gets plugged in :s
you cant root rooting means you can flash custom roms which you've done ?? so you must be rooted ??
and you dont need odin or super one click on your sd (if thats what you meant)
but trying to fix gps locked it as in only open to 1 network/carrier ?? (whatever it's called where you are)
kyle51 said:
dont know why it goes off when usb gets plugged in :s
you cant root rooting means you can flash custom roms which you've done ?? so you must be rooted ??
and you dont need odin or super one click on your sd (if thats what you meant)
but trying to fix gps locked it as in only open to 1 network/carrier ?? (whatever it's called where you are)
Click to expand...
Click to collapse
Come on man.... You are confusing me more than I do !!!!! I hit your thanks button and I did PM you. thanks for trying to help
I think we are all cornfused..... You might have a little more luck finding help in the I9000 forums, try posting your issue there. Good luck!
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Once you select Option 1, you need to go back to the main windows to uncheck one box (F something) and then click start before it does the rooting. I missed it yesterday also and just keep waiting until I realized there was a step I didn't do.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Help!
I am having the same problem and my phone is sitting there with a large android icon and message reading "Downloading.. Do not turn off target!!" I am afraid to disconnect the phone from the USB. What should I do?
ThugosaurusRex said:
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Same here, Verizon Samsung g s4.
I followed the instructions: unchecked the F. reset box, and selected tar and clicked start. The "<OSM> All threads completed. (succeed 0 / failed 0) line showed up, and nothing else.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
whichonespink73 said:
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
Click to expand...
Click to collapse
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
dabs delicious said:
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
Click to expand...
Click to collapse
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
goldberg96 said:
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
Click to expand...
Click to collapse
You're talking about the popup window on your phone, right? Because It pops up for me too, and I click "confirm" each time, but to no avail
Does anyone else have any suggestions?
Question about using the 3 in 1 tool
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Super Noob
Hello everyone this is my very first post, I am looking to root my verizon s4 using the one tool kit i dont believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. i didnt want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
missjamie said:
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Click to expand...
Click to collapse
Root just allows you to hack the software on your phone, and the "unlock" refers to the bootloader. It does not unlock the phone for other carriers; this is done (from what I understand) by dialing a specific set of codes, generally provided to you by the original carrier of the phone if you have an account in good standing with them and you tell them you plan on travelling out of the country and need to use GSM. I have never needed to do this and as such only have a minor theoretical knowledge of the subject; I would appreciate it if somebody with more knowledge on this would confirm or deny my suspicion that you are better off trading the phone for an AT&T/T-Mobile one that actually was meant for GSM, or otherwise obtaining one.
JNava420 said:
Hello everyone this is my very first post, I am looking to root my Verizon s4 using the one tool kit i don't believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. I didn't want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock Verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
Click to expand...
Click to collapse
This is the original bootloader; not the stock firmware. You need to flash this after you successfully root, start the phone, start SuperSU, and update the SU binary.
The full stock firmware is rather large and available here:
http://forum.xda-developers.com/showthread.php?t=2289325
might not know as much as i thought
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
If you need assistance. Pm me. If I sm available ill help you.
JNava420 said:
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
Click to expand...
Click to collapse
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
OverkillSD said:
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
Click to expand...
Click to collapse
Well said. Only correction is the bootloader still remains locked. The recoveries included are loki patched. This bypasses the bootloader. All roms and kernels are loki patched so flashing them is safe. This is as close as we're gonna get to an unlocked bootloader for now.
Ah. I was under the impression the bootloader was unlocked. Thanks for the info.
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
dabs delicious said:
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
Click to expand...
Click to collapse
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
chrisxstyle1182 said:
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
Click to expand...
Click to collapse
Could be a couple of things first make sure your using the cable that came with your phone. Try switching usb ports. Alsi try rebooting your pc
After scrounging, searching, hunting, and generally scrubbing every tree/rock/bush for answers, I have decided that it is time to post. As I am new to these forums, I sincerely appreciate any assistance in this matter. I have tried the only two methods that I can find to root my phone. the one by Bin4ry which is found at http://forum.xda-developers.com/showthread.php?t=1886460. and another one from a different site that was for JB. I have made sure that both debugging is on as well as allowing installations of non-market applications. I have tried every single usb mode, that just on the off chance, mine was that one phone that wanted to seperate itself from society. Since my phone is running ICS 4.0.4 I should be using Bin4ry's version, but I get stopped by this
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.06.2013) v31 =
======================================================================
Device type:
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
Doing a Backup first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue . . .
Please select the RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
3679 KB/s (380532 bytes in 0.101s)
2668 KB/s (1500495 bytes in 0.549s)
3647 KB/s (1165484 bytes in 0.312s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\USERNAME\Desktop\newroot\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot last time now ...
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It says that It's done and that all is done, but I think that because the mounting permission was denied that it wasn't able to root the device. If I could get some assistance on this from someone with more experience, I'd appreciate it. Does anyone know how to fix/root this device? I don't know if this will make a difference or not but it says the software is VS840PP2
Bump, anyone know anything?
I wish someone would
cecpuman said:
Bump, anyone know anything?
Click to expand...
Click to collapse
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Rooted mine
D3d10ck said:
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Click to expand...
Click to collapse
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
Big thanks.Any roms that work on our phone?
---------- Post added at 02:16 AM ---------- Previous post was at 02:01 AM ----------
Can you post instructions on how to flash CM10?
Do i do standard Lucid downgrade to GB procedure?
Thanks in advance.
lviv73 said:
Big thanks.Any roms that work on our phone?
Click to expand...
Click to collapse
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
how to flash clockworkmod
scififan68 said:
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
Click to expand...
Click to collapse
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
You may have to install the baseband for the Exceed. I think in the CyanogenMod beta thread on AndroidForums there is a link but I'm not sure. Use ROM Manager to install CWM Recovery and then Flash CM10.
Vs840pp 4.1.2
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
scififan68 said:
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
Click to expand...
Click to collapse
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
ls5280 said:
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
Click to expand...
Click to collapse
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
scififan68 said:
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
Click to expand...
Click to collapse
Thanks a bunch, I thought it would be okay to do that but just wanted to make sure before doing it.
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
ls5280 said:
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
Click to expand...
Click to collapse
Glad to see you got CM 10 on this phone, since it runs pretty good, the only issue I had is the way it handles low signal areas, which is why I upgraded to the LG Spectrum plus I wanted Verizon 4G LTE.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
kibbles-n-bits said:
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
Click to expand...
Click to collapse
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Will I be stuck in activation mode?
scififan68 said:
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Click to expand...
Click to collapse
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
derekpoole890 said:
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
Click to expand...
Click to collapse
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation https://www.youtube.com/watch?v=8WGKCdlnt1s
wow how did i miss that one!
scififan68 said:
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation
Thanks for the link. I apologize for not researching that better. CM 10 here i come!
Click to expand...
Click to collapse
I know this is an old post but I just snuck and rooted the girlfriends LG Lucid VS840ZV9 / 4.0.4 / software update version 6.3.0_B7
tonight using spectrum_root_windows
http://www.mediafire.com/download/on6cnik4h0fo697/spectrum_root_windows.zip
Hello there. So here is my problem. I tried to root my note tab(8.0 gt-n5110 on kit kat) using odin and it was unsuccessful. Ive deduced that there is no official root for the 8.0.... I could be wrong but I'm pretty. Idk jew to this whole thing..... anyhow... unsuccessful root.... and I cant figure out how to un root and I cant find any spcific/clear instructions on how to fix this for my exact model(too afraid to follow steps for diff note models) SuperSu is installed but whenever I try to open it it says the app has stopped. I no longer wish to root even id it is possible. I just want to go back to normal.... if someone could reply with a clear step by step on how to fix this I woild be in your debt. Thanj you
Why give up on root just because the first time didn't work? But anyway, unless you modified the recovery, the SuperSU app being installed doesn't change or hurt anything. You might just go to the Play Store and see if you can update the app. Depending on which method you used you can just uninstall it via the Application Manager in Settings or the Play Store. If it was installed as a system app then you can just disable it via the Application Manager and no harm done. If you really need to restock (you don't) then this would be a guide:
http://androidromupdate.com/2014/06...-n5110-official-4-4-2-kitkat-update-firmware/
Thank you got your prompt response. The answer to your question about why not try root again.... I work in market research and I sometimes do product testing so I will have to eventually give this back one day so I just don't want to risk it. Also after attempting the root my tablet started like flickering and not staying on for to long unless attached to charger and then when that finally stopped I went to open Google chtome app and got a page saying something to the affect that Google was being hacked into our something like that and totally freaked me out so in this instance not worth it for Me. I have had a rooted android device (galaxy s4) and I do love all the mods and endless benefits to root so I do understand why you would question. Again I thank you and I'm going to be trying out your suggestions here in just a moment.