Related
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
have u tried pressing home and back and on/off button together?
or taking out the battery cable and putting it back in?
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Skeldave said:
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Click to expand...
Click to collapse
My phone can't boot, and so i can't start adb or similar...
world2010 said:
or taking out the battery cable and putting it back in?
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
world2010 said:
have u tried pressing home and back and on/off button together?
Click to expand...
Click to collapse
Yes, but nothing...
Thank you,
dettofatto
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
shivenjuneja said:
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
dettofatto said:
My phone can't boot, and so i can't start adb or similar...
Click to expand...
Click to collapse
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Skeldave said:
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Click to expand...
Click to collapse
my phone didn't go in the update mode...
Where is the battery cable?
Sent from my E10i
dettofatto said:
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
Click to expand...
Click to collapse
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Karadenizli said:
Where is the battery cable?
Sent from my E10i
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
Had the same problem
I had the same problem I took phone apart very carefully unplugged the battery cable and left it for +- 10 minutes plugged battery cable back in assembled the phone I used bin4ry console flash tool I just held down only the back button plugged usb cable in flashtool found x10i mini started flash, Don't turn on phone or anything else after re-connecting the battery just the back button and usb, green led should lite up.I don't know if this help's you must have patience after the flash it takes a while leave the phone for +- 5 minutes after flash run adb shell in console if phone seems not to respond try few times once you get shell your phone should be back to normal just be patient it all takes a while.
stuck in boot loop
Gothic-4-Schiffer said:
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Click to expand...
Click to collapse
Hi,
would it be possible to cause the phone some physical damage while flashing that would've caused the phone to be stuck in the boot loop? because I'm in the asme predicament on my mini pro. thanks
please help me..i'm stuck w/ the white sony ericsson boot logo just after i restored w/ xrecovery..im using a x10 mini pro although i can still access xrecovery..thanks in advance..
take out your sdcard use an external sd card reader and copy a new image like CM6 3.4 on it. now boot into xrecovery.
factory reset
full wipe
clear dalvik cache
install cm6 3.4
reboot
thank you so much slade87..you have saved my fone and my life for w/ your grate help..thank you very much! ^__________^
No prblem i am glad it worked :-D
Sent from my X10minipro using XDA Premium App
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
ableh.X10black said:
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
Click to expand...
Click to collapse
Download SE PC companion and install it:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Open Sony Ericsson PC Companion when it´s installed:
Choose Support Zone(Start/Begin)->updating the phone software: it will pop up a message phone not found. Search for blue marked: Repair phone. Click on it and follow instructions on how to do.
If you still dont get it, check:
http://www.youtube.com/watch?v=i6CMm...eature=related
Hello dear xda users.
Today since 1-2 hours ago something terrible happened. My X10i .. keeps rebooting at the "Sony Ericsson" startup.
History:
I updated to 2.2 Beta 4, but I forgot to update the kernel so the phone kept rebooting, but not at startup, only after a couple of minutes.
I flashed to the required kernel, but decided to go back to Beta 3 instead, and the same problem occured here too, also that the wifi and mobile network were out of function.
And I remembered that I had made an backup of my original version with xRecovery, so I restored the phone and tried to switch back to Beta 3 and this is when the **** happened..
Am I screwed?
Stuffs Ive tried:
* Flash the version back (cannot enter flash mode anymore) = fail
* Tried to make a factory reset through PC Companion (cannot enter flash mode) = fail
I need help guys, this phone is only 2 weeks old. I just want to cry, dunno what to do
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Freak174 said:
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Click to expand...
Click to collapse
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
rendeiro2005 said:
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
Click to expand...
Click to collapse
Thanks for the reply, but how am I supposed to flash if I cant get the green light (called flashmode?)
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
rendeiro2005 said:
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
Click to expand...
Click to collapse
Yea I already tried that out, without success..
Freak174 said:
Yea I already tried that out, without success..
Click to expand...
Click to collapse
i just remember something that`s basic
remove/install PCC & SEUS again you may have a problem with drivers
HAHAH I WAS PRESSING THE DAMN BUTTOM IN THE MIDDLE FOR CHRIST SAKE! HAHAHAHAHAAH
You know when you get so, what should I say.. scared of not being able to solve it, you get blind!
IM SO FUUUUCKING GLAD SORRY FOR THE F WORD BUT YEEEEEEAAAA
Lol... But good that you can go on again....
sent from my 2.2 X10
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
mustbiw said:
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
Click to expand...
Click to collapse
lol...how many threads are you starting for this...
As I said in the dev section thread you started.
Attach your phone to the pc and run SEUS or PC companion and follow the instructions
pc companion cannot detect phone coz x10 canot enter to main menu.. what should I do bro...
mustbiw said:
pc companion cannot detect phone coz x10 canot enter to main menu.. what should I do bro...
Click to expand...
Click to collapse
OK,
Have you got SEUS?
If not google it and download it.
Once you have done that send me a PM
Been through this pickle too, dont worry, go in dev forum search your generic rom, and flashtool and follow the instructions to flash the generic rom, ps, in xrecovery dont forget to make a backup of ur generic rom, saves a lot of time when things like this happen
Sent from my X10i using XDA App
gregbradley said:
OK,
Have you got SEUS?
If not google it and download it.
Once you have done that send me a PM
Click to expand...
Click to collapse
I've got SEUS but stop in the 3rd stage coz it cannot detect my phone since it's always reboot every time...
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
mustbiw said:
I've got SEUS but stop in the 3rd stage coz it cannot detect my phone since it's always reboot every time...
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
Click to expand...
Click to collapse
Do you have recovery installed?
If so, when you see the sony ericsson screen keep hitting the back key (The one on the right on the front)
That will put you into recovery
If not download flashtool from here
and install it on your pc..
attach phone and you will see it connect.
Click root
then ask root permissions
then xrecovery
PS, in SEUS are you holding down the back button...
Turn the phone off (Pull the battery out if you have to and put it back in)
then hold down back button when SEUS says so
mustbiw said:
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
Click to expand...
Click to collapse
The button key is the back button, press it after you boot the phone ay the sony ericsson and yes you can flash custom roms from sd card, just be sure youre on the right baseband, if not flash it with flashtool. Have fun
Sent from my X10i using XDA App
gregbradley said:
Do you have recovery installed?
If so, when you see the sony ericsson screen keep hitting the back key (The one on the right on the front)
That will put you into recovery
If not download flashtool from here
and install it on your pc..
attach phone and you will see it connect.
Click root
then ask root permissions
then xrecovery
PS, in SEUS are you holding down the back button...
Turn the phone off (Pull the battery out if you have to and put it back in)
then hold down back button when SEUS says so
Click to expand...
Click to collapse
Many thank's now I can flash my X10 with froyo_Achotjan v03, but still have a problem with the phone signal, though I have followed all instruction with dev tool...
try to find the app called
dev tools
Goto bad behaviour and them crash system server.
If that does not work make sure you are on the correct baseband.message me if you need more help
mustbiw said:
Many thank's now I can flash my X10 with froyo_Achotjan v03, but still have a problem with the phone signal, though I have followed all instruction with dev tool...
Click to expand...
Click to collapse
Sent from my X10i using XDA App
gregbradley said:
try to find the app called
dev tools
Goto bad behaviour and them crash system server.
If that does not work make sure you are on the correct baseband.message me if you need more help
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have done that but still I there's no phone signal... and I tray many time to enter xrecovery by pressing power + back button but it never enter the xrecovery..
what shoud I do..
Don't press the power key.
turn the phone on
When you see the sony ericson logo repeatedly press the back key.
If it does not go into recovery you have not installed it on your phone
Sent from my X10i using XDA App
gregbradley said:
Don't press the power key.
turn the phone on
When you see the sony ericson logo repeatedly press the back key.
If it does not go into recovery you have not installed it on your phone
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have finished successfully using SEUS but it still reboot and never enter main menu, in the past I have installed xrecovery,but is it still there after I installed with SEUS?? what should I do...
If your phone doesnt work after flashing with SEUS then I think your phone is broken.
SEUS a clean install of the latest SE software so it should work.
Did you choose to do an update or a factory reset and update.
Try again in PC Companion and choose factory reset and update.
Go here to download PC Companion
mustbiw said:
I have finished successfully using SEUS but it still reboot and never enter main menu, in the past I have installed xrecovery,but is it still there after I installed with SEUS?? what should I do...
Click to expand...
Click to collapse
gregbradley said:
If your phone doesnt work after flashing with SEUS then I think your phone is broken.
SEUS a clean install of the latest SE software so it should work.
Did you choose to do an update or a factory reset and update.
Try again in PC Companion and choose factory reset and update.
Go here to download PC Companion
Click to expand...
Click to collapse
I do update till complete successfully...
Viola....
Many for thanks all help, I tray to upgrade again using SEUS then after finish I do release the batteray for a minute then I start and everything gone well back to original 2.1...
Thanks everybody....
No problems...dont forget to hit thanks button
mustbiw said:
Viola....
Many for thanks all help, I tray to upgrade again using SEUS then after finish I do release the batteray for a minute then I start and everything gone well back to original 2.1...
Thanks everybody....
Click to expand...
Click to collapse
gregbradley said:
No problems...dont forget to hit thanks button
Click to expand...
Click to collapse
My Last Problem is Phone signal, its always no service though I have use dev tools or factory format with sd card unplugged.... what should I do...
goto settings>about phone and tell me what the phone says for
android version
baseband
kernel version
mod version
i.e the last 4 things on that page
mustbiw said:
My Last Problem is Phone signal, its always no service though I have use dev tools or factory format with sd card unplugged.... what should I do...
Click to expand...
Click to collapse
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
XTacDK said:
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
Click to expand...
Click to collapse
restore your phone via SEUS from pc companion it will revert your kernel to stock and install the stock rom
Don't worry, I did the same thing the first time I tried to install Zombie Panic. Download the Sony Ercisson Update Service from here, insatll it on your PC and follow the instructions to install (even if it says you have the latest version). It'll take you back to Stock ROM and your phone will boot.
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
XTacDK said:
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
Click to expand...
Click to collapse
you should start the update process while the phone is disconnected and press repair then when asked connect the phone while you are pressing the back key to connect via flash mode.
Wait.. but i choose the reprair phone option and now it trying to reprair it, i just believe, at this will save my phone
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
XTacDK said:
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
Click to expand...
Click to collapse
for mini you can't take the battery out
just turn off the phone for 5 seconds press the back key and connect the phone to the pc it should the start the repair via flash mode
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
XTacDK said:
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
Click to expand...
Click to collapse
mmm try to flash a stock kernel from the forum on this link via flashtool
http://forum.xda-developers.com/showthread.php?t=1254225
and then update via SEUS it should work...
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
XTacDK said:
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
Click to expand...
Click to collapse
well the only way to remove the battery of x10 mini is to disassemble it so send it for repair is better.
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
well man this is not the worst! i have now while talking to you the worst brick! i crashed my bootloader and i can't even flash my stock kernel!
i cant do this too,,, But i think if i restart the phone, so i see kernel nAa 6 logo and i will install mCM7! I must be optimist, cause i want to cry now ;D
XTacDK said:
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
Click to expand...
Click to collapse
Prepare SEUS on repair mode, until message to connect phone.
Press and hold power button, then press home button (don't release power button) and wait phone off. press and hold back button then connect the usb cable.
thank you!!!!you saved my phone~! Now can install mCM7.... thank you!!!
I was tryin to install MiniCM7 and during my noobish attempt I pretty much deleted everything on my phone. Factory reset and such. And I attempted to fix by rebooting the phone but now all I get is the Sony Ericsson Logo and when I try to turn the damned thing off it turns back on. I tried SEUS but even after quickly hitting back and plugin the usb cable after Home+Back+Power no dice. Can anybody out there help this desperate noob soul :c
Cant you pull out the battery connector underneath the rubber bit next to the camera to turn it off??
Sent from my U20i using xda premium
Battery Disconnected What now?
First of all im new here and im from greece so simple words would be appreciated
second is the problem
i installed the minicm10 rom to my android x10 mini and the wifi didnt want to turn on so i tried to format it back to its first android version but i forgot the part where you have to format the data,system and cache file and that resulted in my phone turning off.
Now the phone doesn't turn on no matter what i do.
i connect it to my pc with pc companion and it doesn't show that my phone is connected
i pulled of the battery connection through that removable rubber thingie at the back of the phone,connected it again nothing.
tried to reset the phone nothing again
so if anyone knows what to do any help is appreciated
Do you still get a vibrate or the led to light up when you press the power-button?
SmG67 said:
Do you still get a vibrate or the led to light up when you press the power-button?
Click to expand...
Click to collapse
nope nothing
and also i rooted and unlocked bootloader before flashing new kernel into the x10 mini
Theodor123 said:
nope nothing
and also i rooted and unlocked bootloader before flashing new kernel into the x10 mini
Click to expand...
Click to collapse
You didn't by accident flash the x10blrelock.ftf did you?
SmG67 said:
You didn't by accident flash the x10blrelock.ftf did you?
Click to expand...
Click to collapse
first i flashed this E10_2.6.32.60-nAa-05 and after that this MiniCM10-4.0.2-robyn
Theodor123 said:
first i flashed this E10_2.6.32.60-nAa-05 and after that this MiniCM10-4.0.2-robyn
Click to expand...
Click to collapse
Yeh, but the problem is what you did after that, you said you tried to get it back to original firmware... How?
SmG67 said:
Yeh, but the problem is what you did after that, you said you tried to get it back to original firmware... How?
Click to expand...
Click to collapse
when the phone was working i pressed the power button and selected reboot.
after that in the menu i forgot to format the system,data,cache folder and went straight to format the phone which caused the phone to close instantly
Theodor123 said:
when the phone was working i pressed the power button and selected reboot.
after that in the menu i forgot to format the system,data,cache folder and went straight to format the phone which caused the phone to close instantly
Click to expand...
Click to collapse
That doesn't make sense. because that wouldn't have deleted the kernel, you can only do that from the pc, not from the phone itself. And as long as the kernel is on there it will turn on. You must have done something else. Or your battery is completely empty, but i don't really think that that's it either. Try to put it on charge (wall-charger) anyway and see if that does something.
SmG67 said:
That doesn't make sense. because that wouldn't have deleted the kernel, you can only do that from the pc, not from the phone itself. And as long as the kernel is on there it will turn on. You must have done something else.
Click to expand...
Click to collapse
all i did was to reboot the phone and press the format option from the menu.nothing else
also i measured the battery and it showed it was full
Theodor123 said:
all i did was to reboot the phone and press the format option from the menu.nothing else
also i measured the battery and it showed it was full
Click to expand...
Click to collapse
I don't know which format option you chose in that menu, but there's nothing in there that actually kills your phone. I assume it's still turned off now.. if you press the back-button and connect the usb-cable, does the green light come on?
SmG67 said:
I don't know which format option you chose in that menu, but there's nothing in there that actually kills your phone. I assume it's still turned off now.. if you press the back-button and connect the usb-cable, does the green light come on?
Click to expand...
Click to collapse
nope it doesnt and the repair function on pc companion does not identify it the pc basicly doesnt "see" the phone when its connected
Theodor123 said:
nope it doesnt and the repair function on pc companion does not identify it the pc basicly doesnt "see" the phone when its connected
Click to expand...
Click to collapse
There's not much we can do to help you then, apart from advising you to have it JTAG-ed at a repair-shop.
SmG67 said:
There's not much we can do to help you then, apart from advising you to have it JTAG-ed at a repair-shop.
Click to expand...
Click to collapse
well thanks for trying anyway
Theodor123 said:
well thanks for trying anyway
Click to expand...
Click to collapse
You're welcome, hope you can get it sorted
phone turns on only when charging
hello,
my phone was working properly but all
of a sudden it switched off one day
and from then on it is working only
when its on charging I tried many
solutions like repairing the software
through PC companion and also
flashed it
can u suggest me it's a battery or
software problem?