Laidies and gentlemen,
Here is a problem.
I upgraded my Samsung Vibrant Galaxy S SGH-T959 from T-Mobile USA to Android 2.2 and now I can't pick up gsm network at all.
I tried roms JP3, JP3 and JPK. On first two I simply get a crossed circle in status bar. If I pull out sim the phone will not request it at all. If I put sim in and try to search for mobile network, it will not find any.
On JPK I get black screen after S logo and random vibrations.
I even tried JP3 rom with JPK modem and still no gsm/wcdma.
I also tried both PIT 512 for JP2 and JP3 and PIT 803 for JPK.
Also to ensure Odin3 is ok I tried both v1.00 and v1.30.
I am completly pizzled here.
Just to make sure, I am not referring to WIFI or 3G/Edge. I do not have the basic gsm network to make calls.
Any suggestions??
TIA
RTQ
So, um, which froyo "upgrade" did you use? You know there's not an official one yet, right?
It would have to have been eugene or master's... Or you used one meant for another galaxy s device, which would totally explain your problem.
Sent from my vibrant using XDA App
I could totally be wrong here as it is 5 am here, but are any of the current froyo roms based off of JP3 or JPK? If I recall correctly they are all JPM or JPO based. It definitely sounds like you flashed something that wasn't for your phone, or flashed something incorrectly (seeing as I haven't read anything about JP3 or JPK).
If you can still get into download mode, here's stock JFD for the Vibrant.
And here's the stock kernel, since you probably need that too.
RTQ said:
Laidies and gentlemen,
Here is a problem.
I upgraded my Samsung Vibrant Galaxy S SGH-T959 from T-Mobile USA to Android 2.2 and now I can't pick up gsm network at all.
I tried roms JP3, JP3 and JPK. On first two I simply get a crossed circle in status bar. If I pull out sim the phone will not request it at all. If I put sim in and try to search for mobile network, it will not find any.
On JPK I get black screen after S logo and random vibrations.
I even tried JP3 rom with JPK modem and still no gsm/wcdma.
I also tried both PIT 512 for JP2 and JP3 and PIT 803 for JPK.
Also to ensure Odin3 is ok I tried both v1.00 and v1.30.
I am completly pizzled here.
Just to make sure, I am not referring to WIFI or 3G/Edge. I do not have the basic gsm network to make calls.
Any suggestions??
TIA
RTQ
Click to expand...
Click to collapse
Did you flash the original Galaxy S ROM?
The radios are different in the original GT-i9000 and SGH-T959.
Did you try following Eugene's Froyo that does not brick and flash back to JFD route?
There is also a new ODIN in the wild 1.7 I believe, check the bible in the dev secion.
More details
Thanks everybody for your suggestions.
Here are more details and answers fot you:
1. I am currently running JP3 with modem from JPK - that I tried out of desperation, installed via Odin3 1.30. Previously I used JP2 and JP3 on PIT 512.
2. JPK blacks the screen out after S logo and gives random vibrations until I pull the battery out. So you might be right about JPK's incompatibility.
3. I already downloaded JPD but it contains no modem or CSC.
4. Would it make a difference if I rold you that on either JP2 and JP3
- my Vol+ and Vol - keys are reversed
- home button does not work
- in recovery mode OK button does not work
- Vol -/Home/Power combo never worked even on original 2.1 rom
- to get to Donload mode I had to have USB cable attached (but not connected to the PC) press Vol +/- and Power
- the only way I get to Download mode now is by adb
RTQ
RTQ said:
Thanks everybody for your suggestions.
Here are more details and answers fot you:
1. I am currently running JP3 with modem from JPK - that I tried out of desperation, installed via Odin3 1.30. Previously I used JP2 and JP3 on PIT 512.
2. JPK blacks the screen out after S logo and gives random vibrations until I pull the battery out. So you might be right about JPK's incompatibility.
3. I already downloaded JPD but it contains no modem or CSC.
4. Would it make a difference if I rold you that on either JP2 and JP3
- my Vol+ and Vol - keys are reversed
- home button does not work
- in recovery mode OK button does not work
- Vol -/Home/Power combo never worked even on original 2.1 rom
- to get to Donload mode I had to have USB cable attached (but not connected to the PC) press Vol +/- and Power
- the only way I get to Download mode now is by adb
RTQ
Click to expand...
Click to collapse
Seriously we doesnt know what u talking about froyo. Vibrant doesnt have any froyo yet, unless u using eugene and other rom. My suggestion is revert it back to stock and wait for update. If u have aGALAXYS INTERNATIONAL phone then u in the wrong place
Sent from my SGH-T959 using XDA App
This guy is all kinds of confused. Shouldn't give these people phones.
Listen: You do NOT install something on your phone that is NOT made for your phone. First problem right there. If you want Froyo on your phone, look in the DEVELOPMENT section under the VIBRANT category. VIBRANT, the phone that you have.
What you need to do is ODIN back to JFD and never touch your phone again.
Go into download mode and open up ODIN 1.7 and use the CORRECT PIT FILE for your phone and the JFD firmware. All of this can be found in the development section.
Actually, I'll be nice and show you exactly where.
Odin 1.7
http://forum.xda-developers.com/showpost.php?p=8863820&postcount=138
JFD and Pit File (post #1 and the pit file is post #3. Do NOT download Odin v1 from the third post, very unstable)
http://forum.xda-developers.com/showthread.php?t=739091
kangxi said:
This guy is all kinds of confused. Shouldn't give these people phones.
Listen: You do NOT install something on your phone that is NOT made for your phone. First problem right there. If you want Froyo on your phone, look in the DEVELOPMENT section under the VIBRANT category. VIBRANT, the phone that you have.
Click to expand...
Click to collapse
+1 u should odin it back to stock and leave it alone. If u want to flash ur phone then make sure u in the right forum and read then read some more b4 u do it
Sent from my SGH-T959 using XDA App
RTQ said:
Thanks everybody for your suggestions.
Here are more details and answers fot you:
1. I am currently running JP3 with modem from JPK - that I tried out of desperation, installed via Odin3 1.30. Previously I used JP2 and JP3 on PIT 512.
Click to expand...
Click to collapse
You didn't answer the earlier questions--where did you get these ROMs? Are you flashing ROMs from the i9000 dev board?
There is no SGH-T959 Froyo update which is why you're having these problems.
Odin back to stock JDF then flash Eugene's Froyo if you're looking to run it. Or wait a few weeks and we'll have the update...maybe.
~SB
Kubernetes said:
You didn't answer the earlier questions--where did you get these ROMs? Are you flashing ROMs from the i9000 dev board?
Click to expand...
Click to collapse
Of course he flashed the UK rom....volume buttons reversed, and he now suffers from a 3 button configuration. wow...just wow.
Sent from my GT-I9000 using XDA App
I had the same thing happen to me last night with my phone not detecting the gsm.
This is what I did, I not tech savvy, but I did I did not like the 2.1 OTA update for the sgh-t959, my phone was laggy everywhere. So I researched and researched about froyo for the Vibrant, and you guys are right there is no OTA update, but it was made possible through the mini kies, first in the UK, then finally the U.S. after I updated everything was great. This is after the fact that a friend of mine said I should root my phone and flash the (cynogen???) custom rom. I have rooted my phone through the super on click method, but I decided I didn't need to go beyond that and I haven't, it's still rooted. SO, I was trying to use an app while at the grocery store, and my phone froze, hasn't happened since I had 2.1. I turn it off and when I turn I off, the home screen never loads, it's completely black except for the status bar at the top. The media scanner keeps on scanning and there is the universal no symbol there. scared the **** out of me.
So I pulled the battery, took it home and plugged it in to charge, let it charge turned it on and left it alone all night without looking at the screen to see if it booted up. I woke up this morning and I was lucky it loaded fine. Can someone please advise me as to what I did?or why this might have happened?
THESephiENIGMA said:
I had the same thing happen to me last night with my phone not detecting the gsm.
This is what I did, I not tech savvy, but I did I did not like the 2.1 OTA update for the sgh-t959, my phone was laggy everywhere. So I researched and researched about froyo for the Vibrant, and you guys are right there is no OTA update, but it was made possible through the mini kies, first in the UK, then finally the U.S. after I updated everything was great. This is after the fact that a friend of mine said I should root my phone and flash the (cynogen???) custom rom. I have rooted my phone through the super on click method, but I decided I didn't need to go beyond that and I haven't, it's still rooted. SO, I was trying to use an app while at the grocery store, and my phone froze, hasn't happened since I had 2.1. I turn it off and when I turn I off, the home screen never loads, it's completely black except for the status bar at the top. The media scanner keeps on scanning and there is the universal no symbol there. scared the **** out of me.
So I pulled the battery, took it home and plugged it in to charge, let it charge turned it on and left it alone all night without looking at the screen to see if it booted up. I woke up this morning and I was lucky it loaded fine. Can someone please advise me as to what I did?or why this might have happened?
Click to expand...
Click to collapse
LOL can someone please translate this because I have the same problem - the phone is unable to detect any GSM network. I flashed the deodexed KB5 stock 2.2 ROM, but had no luck with 2.1 either.
Who's your sevice provider? I'm wondering if it has to do with at&t's acquisition of t-mobile. At least in my case.
Sent from my SGH-T959 using XDA App
t959 flashed with wrong file
HI i am new to android.
and i flashed my samung galaxy vibrant t959 with wrong file of samsung i9000.
i dint take backup while formating i am searching for orginal froyo to reinstall it using odin but i am unable to get the links..i foung some links but that is not working.
please some one help me with original froyo or ginerbread download as i am stuck in recovery mode.
Try to flash radio/modem... same issue was with me when i upgraded to 4.1.... now its no longer issue for me
Sent from my SGH-T959 using xda app-developers app
Related
Hi,
i bought this mobile on ebay cheap,it has cracked digitizer.I flashed it with stock 2.1 and tried official fw but it stucks on vibrant screen.It goes in download with no problem.Does anybody have europe fw files for odin3,pda csc and phone,also pit?Thanks people,forum rules!
flash files are from xda forum,vibant subforum,vibrant is t mobile usa,i'm from Europe
Just found that has a marked water label red on phone and battery:-(
I have put galaxy s fw on it,latest with froyo 2.2,and stucks again,now it's working bottom four buttons.
Could someone help?I have dissasembled phone and cleaned contacts...
pic where it stucks
Wouldn't recommend flashing US Vibrant to EU fw. Tried it myself yesterday, and after a lot of trouble I got it to boot. However, the home and back-key now work as one, needless to say it's very irritating (multitasking doesn't work for example). I'm flashing back to US fw as soon as I get home.
Tried with 5 different firmwares,3 were from I9000 and nothing,it just stucks on vibrant sign.Does anybody know how to change bootloader or something cuz this is driving me crazy.I know phohe hardware is ok...anybody?
Why don't you try to flash in stock TMO USA firmware. Search for T959UVJFD and s1_odin_20100512.pit
If it works then just SIM unlock it and use it that way until you find something better.
At least the phone will be usable.
Gad13 said:
Why don't you try to flash in stock TMO USA firmware. Search for T959UVJFD and s1_odin_20100512.pit
If it works then just SIM unlock it and use it that way until you find something better.
At least the phone will be usable.
Click to expand...
Click to collapse
Tried that,i flashed with T959UVJFD and s1_odin_20100512.pit,but phone doesn't goes any further than vibrant sign.Is there a way to change bootloader?
edit:same thing is with captivate rom,it goes till at&t picture with white background and stay's that....i'm going for smokes,can't take it anymore
The phone has 2 boot loaders.
The first one is the PBL. Some people call it primary. Samsung call it primitive. This is ok on your phone because you are able to see vibrant screen.
Second one is SBL /Second boot loader/. You can flash it using odin. All you need is to add the proper sbl.bin file to the T959UVJFD.tar file. I doubt you need to flash the SBL on your phone. The fact you can use odin to flash the device means your PBL and SBL are ok.
On your first post you mention something about water damage. You may have a real hardware problem.
I'm aware that i could have a real hardware problem,but i wanna go through all to confirm this is 100%.I can see that T959UVJFD has no sbl.bin in odin.Does somebody have maybe this file to share?
Thanks Gad13 for information!
edit:Just opened all pda's i have flashed,noone has no sbl.bin
Keep in mind this is a very dangerous operation. Don't blame me if your phone become worse.
Here is my SBL. It is TMO USA.
Unzip sbl.bin and add it to the tar file. I usually use AllZip and drag and drop.
MD5 file is for you to verify the bin file.
One more time. Do you really want to try this?
Yes,i'm aware i flashed it but now i cannot go in download mode...is there a way of some jtag approach to this unit?
Sorry to hear that.
There is a JTAG thread going on
http://forum.xda-developers.com/showthread.php?t=756988
What do you see on the screen?
Restart ur phone plugs ur usb on as soon as ur computer makes a sound use adb to reboot into ur recovery
Hope this help
Sent from my SGH-T959 using XDA App
Phone does not starts,i mean it does not gives anything on the screen.i'm waiting for jtag approach to phone...
hi all, i would like to ask you for a help with my vibrant. I just purchased it and successfully made the root and unlock. I managed to do both even tho my hardware button keys does not support the recovery mode. Any holding of the buttons will not allow the phone to go to recovery mode, this is not working even with an odin. After i did the root and unlock i downloaded the rom manager, created a clockwork image and back up i tried to make the partition of my 16gb SD card using the rom manager. After this my phone restarted but after t mobile logo and galaxy s logo the phone screen stays black. Tried all thee methods to go into the recovery mode but was not able to do it. i searched this forum also but was not able to find similar case to this one. i would be very thankful for any advice.
You'll have to get T-Mo to exchange it.
http://forum.xda-developers.com/showpost.php?p=8149673&postcount=15
thanks to this instructions i was able to use odin but this did not change the satus of my phone?????
unfortunately cant i did not buy it in the store
NEVER use rom manager to partition your SD card. Try the steps in this thread
thank you, trying to do it now
a friend of mine bricked his phone and it boot up to the "S" screen then go black after a min. i flashed it using oden and the T959UVJFD file but i got the same results when trying to boot up again. it wasn't my phone and i had already sent the guy to get a new one, but i just started flashing it with all the vibrant oden roms i could find... non of them worked. i really didnt care any more so i was just playing around with the phone and flashed a i9000 rom, of corse it didnt work but when i flashed it back with the T959UVJFD file it worked.... i dont know if it would work out for you i just wanted to share the story... good luck
thank you, unfotunatelly i am stuck with HW keys problem againm!!!!
i follow the steps from the post 4 from @Alkaloid and now from dead i am at froyo and will hang here for a while cause at least for a week dont want to flash nothing. Boy what a day, 12 hours fixing this samsung!!!
Ivuso, how did you get in to download mode? I tried everything from every single thread here that mentions how to get in to download mode..
Odin is the way to go..it saved me too
DJ! said:
a friend of mine bricked his phone and it boot up to the "S" screen then go black after a min. i flashed it using oden and the T959UVJFD file but i got the same results when trying to boot up again. it wasn't my phone and i had already sent the guy to get a new one, but i just started flashing it with all the vibrant oden roms i could find... non of them worked. i really didnt care any more so i was just playing around with the phone and flashed a i9000 rom, of corse it didnt work but when i flashed it back with the T959UVJFD file it worked.... i dont know if it would work out for you i just wanted to share the story... good luck
Click to expand...
Click to collapse
how did u manage to do that
You do not have to exchange it the same thing happened to me. You just need to use odin to flash the stock rom onto it. Its really easy. Youtube it
Sent from my SGH-T959 using XDA App
if you have the hardware keys lock the only way to get to download modwe is through odin. For me worked this.
start odin, fil pit and pda
remove battery
usb in the computer
hold volume buttons
put battery in - phone is showing just the battery charging status
disconnect usb and than fast connect back
now you are able to flash froyo from the the 4th post in this thread, once finished you will be in download mode but need to reboot with adb cause hardwate "enter" button will not work
GOODLUCK
can you help me i have a vibrant on auxra 2.2.5 one before froyo. everything worked fine until installed voodoo then couldnt hear no sound from phone unles pluged headphones so tried deleting voodoo didint work then tried yor unistall app now phone dont turn on. needs to be conected first to sb or chargers and keeps repeating e; cant mount/dev/block/mmcblk0p2 invaild arguement .when connect phone to usb or charger also a screens comes up and i cant select either reboot now ,apply sdcard;update zip or wipe data or cwipe cache.just stuck plz help new phone and usless plz help MY MAIL IS [email protected][/url]WAT CAN I DO
Can you get into download mode? Try to odin eugenes froyo that doesn't brick then reset odin with jfd or ji6 and the pit file and odin that you should be good
Runnin nero+dow+oclf
willsnews said:
can you get into download mode? Try to odin eugenes froyo that doesn't brick then reset odin with jfd or ji6 and the pit file and odin that you should be good
runnin nero+dow+oclf
Click to expand...
Click to collapse
alll that shows when connect to compter or charger battery shows like charging the screen with e; message comes up. And top of screen says call the android system recovery2e samsung recovery utils for btl. Keeps flashing to that then back to battery sign
technowiz said:
alll that shows when connect to compter or charger battery shows like charging the screen with e; message comes up. And top of screen says call the android system recovery2e samsung recovery utils for btl. Keeps flashing to that then back to battery sign
Click to expand...
Click to collapse
not to tech sabby cold you explain a bit sorry
Take out the battery plug in the phone to a computer hold down the volume keys while putting the battery back in if you've done this correctly you'll get a screen with an android holding a shovel that's download mode you'll know cause it will say download try it a couple times if you don't get it at first if you can't get into that screen your phone is hardware locked and we can go from there do you know anything about using odin?
Runnin nero+dow+oclf
willsnews said:
take out the battery plug in the phone to a computer hold down the volume keys while putting the battery back in if you've done this correctly you'll get a screen with an android holding a shovel that's download mode you'll know cause it will say download try it a couple times if you don't get it at first if you can't get into that screen your phone is hardware locked and we can go from there do you know anything about using odin?
Runnin nero+dow+oclf
Click to expand...
Click to collapse
no i dont know much bout odin .and tried a few times and didnt work
So you can get into download? Odin is easy did you get into the application? Cause if so that was the hard part
Runnin nero+dow+oclf
willsnews said:
so you can get into download? Odin is easy did you get into the application? Cause if so that was the hard part
runnin nero+dow+oclf
Click to expand...
Click to collapse
no couldnt get to download mode
You need a jig google search (jig resistor xda )that should take you right to the page you need also read the bible in the sticky on this page you'll learn what you need to learn about odin from there
Runnin nero+dow+oclf
Tried searching bt cant find bible could you guide me throgh the steps i know its alot to ask
http://forum.xda-developers.com/showthread.php?t=771111 i think this should do it
Hey i think I have the same problem. I know how to use Odin but Im having trouble finding Eugene's version of froyo. Here's the thread that someone linked to but the thread was shut down
http://forum.xda-developers.com/showthread.php?t=740558
Does anyone know where i can get this version of froyo or some rom that doesn't brick?
calvincante said:
Hey i think I have the same problem. I know how to use Odin but Im having trouble finding Eugene's version of froyo. Here's the thread that someone linked to but the thread was shut down
http://forum.xda-developers.com/showthread.php?t=740558
Does anyone know where i can get this version of froyo or some rom that doesn't brick?
Click to expand...
Click to collapse
Eugenes Froyo That Doesn't Brick (Odin)
Technowiz said:
no couldnt get to download mode
Click to expand...
Click to collapse
if you do decide to use odin, make sure and at least try to disable voodoo beforehand. (It saves alot of trouble, it is however; possible to use odin without doing this, using froyo that doesen't brick... but I would not recommend it unless its your absolute last resort.)
I would try simply disableing voodoo and see if that fixes it.
welll gonna make a jig to get to download mode will i need any thing else besides odin to flash froyo that doesnt brick to the vibrant
hey well tried to remove voodooo and kind of bricked the phone got to dl mode them odin back to stock but phone goes blank afterthe samsung music and soft keys light up
finally got it. using eugenes froyo worked for me! thanks for the help
I was trying to revert my wifes phone to stock and odin would not work. I used heimdell with the wrong file. The phone now has a i9000 interface. I cant call or text because it wants a sim card which obviously is impossible. and I cant get it in download mode to put the Fascinate interface back on it. Im an idiot!
Zerokillstreet said:
I was trying to revert my wifes phone to stock and odin would not work. I used heimdell with the wrong file. The phone now has a i9000 interface. I cant call or text because it wants a sim card which obviously is impossible. and I cant get it in download mode to put the Fascinate interface back on it. Im an idiot!
Click to expand...
Click to collapse
hey,
chill, user error happens. I know your wife probably can't see that right now but....
one time I did the same thing, sorta, and bricked and couldn't get into download mode. I couldn't get the phone to do anything, not even the charging animation. that is how you know its bricked.
it sat there unplugged and without a battery or sdcard for about 20 hours lifeless. I was in the process of ordering a new phone through insurance when I decided to hold my volume button down, plugged in and it was great!
once you get to this point, and you will if your phone is turning on at all its not bricked, then you will need to follow instructions for repartition like your coming off cm7mtd using a FULL BUILD like DI14 (I have a mesmerize so I'm not positive your full builds) with repartition checked using the atlas_2.2.pit file.
if that didn't work at all for you, there is a way to force download mode, using a homemade jig. google for galaxy s download mode jig if that's your only option.
good luck, and please do let us know how it goes for you. I've never used heimdall but its pretty similar to odin from what I've seen so that would probably work as well. if you're not sure if the rom you have for heimdall is a full build, open it with winrar/winzip our whatever and count how many files are inside, for me its 8 I think with full mesmerize build but we are missing one file that the fascinate build has I believe.
Sent from my SCH-I500 using XDA Premium App
perhaps if download mode is busted you could flash a fascinate rom after rooting and then boot to recovery and try flashing something a little closer to home like one of the pick n packs for the mesmerize...
but this would be one of the last things I would try, right before the homemade jig.
Sent from my SCH-I500 using XDA Premium App
Are you sure you're using the right button press for i9000? Like the guy above said try Vol button down and plug in.
Hi, everyone, I've recently HARD BRICKED my Samsung Galaxy MODEL: T959V with T-mobile. First off, I got pattern locked on my phone, yea I know I'm an idiot, LOL. Next I totally forgot my gmail password so I could not log back into my phone. So then I next decided to flash back to stock with odin 1.7 and T959UVJFD. tar file from this thread: http://forum.xda-developers.com/showthread.php?t=1047087. As a result, my phone would boot to the loading screen with the dashed circle and a battery display in the background and thus would not finish booting all the way. So I figured I would do more research and found that people would try flashing with the Eugene_2E_JK2_Froyo from this thread: http://forum.xda-developers.com/showthread.php?t=833024&page=49 and after flash back to stock. After I flashed with the Eugene rom this was when the phone completely died and would not turn on. I tried the take out the battery, holding down and up volume button and plugging into computer method but the computer would not detect it anymore. Now I don't know what to do. It won't turn on anymore and can't boot into download mode. Please help.. Thanks, and appreciate it.
I just got bricked too...Went to update my vibrant that was on eclair still...Try to update to froyo on Samsung Kies Mini...download went fine...then when finished...it wouldnt turn on....just ordered a JIG....should be here Tuesday...http://www.amazon.com/SainSmart-Don...73JQ/ref=sr_1_1?ie=UTF8&qid=1321751047&sr=8-1
and yes...my family on XDA...i tried every finger combination to try to get to download mode...Sitting outside waiting for ups as we speak...
You might need to look into a jtag, I wouldnt give up getting into download even if the screen is black. Some members have had sucess by pulling the battery, sim card and letting the vibrant settle for an hour or so. reset in odin and keep trying, your phone wont respond but odin may recognize it by the yellow com bubble.
im guessing u've tried this:
http://forum.xda-developers.com/showthread.php?t=848737
also read post #5 in this thread:
http://forum.xda-developers.com/showthread.php?t=1352334
be sure u understand what he says: he's basically just pretending the screen doesnt work and holding the buttons for the amount of time it would take to enter download mode. even tho the screen never responds, odin will suddenly recognize the phone. u can tell when this happens cuz that box in odin turns yellow. then flash JFD like normal or whatever ur gonna do.
good luck
Thanks for replying everyone.
Sugartibbs : I've been working on this all day. Yea, I definitely can't get it to work on odin. It's not being recognized at all. where can i get a jtag?
crypkilla : Yea I definately tried those two things already. I've searched all over the forum. I think it's time to take it in..... LOL. Is there a difference between the two models T959UV vs. T959V, in terms of the stock rom I was originally suppose to use?
that's a bummer.
i havent had a completely unresponsive phone before, but ive thought ive been pretty screwed a few times and the only other thing i know is that ive read people say that they've tried the same thing a hundred times and on the hundred and first time it worked and that's been my experience.
be sure and post if u do get lucky and fix it.
ascensi0n said:
Thanks for replying everyone.
Sugartibbs : I've been working on this all day. Yea, I definitely can't get it to work on odin. It's not being recognized at all. where can i get a jtag?
crypkilla : Yea I definately tried those two things already. I've searched all over the forum. I think it's time to take it in..... LOL. Is there a difference between the two models T959UV vs. T959V, in terms of the stock rom I was originally suppose to use?
Click to expand...
Click to collapse
You flashed wrong ROM and you're in wrong forum.
T-mobile Vibrant is T959
T-mobile Galaxy S 4G is T959V
T959UV is just a baseband not model number.
Sent from my T959 using XDA App
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
ascensi0n said:
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
Click to expand...
Click to collapse
First you need to get to download mode. Then try this
http://forum.xda-developers.com/showthread.php?t=1353176
Sent from my T959 using XDA App
ascensi0n said:
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
Click to expand...
Click to collapse
LOL i did the same thing ended up selling the phone :laugh: