Related
Hi Guyz,
I am from Quebec, Canada on Rogers Wireless.
I've updated this Afternoon. Okay cool but my 3G is a little laggy.
All Rogers internet setting is ok, all is working good but it's laggy with this switch, compare to 1.6..
What about you guyz? Laggy too ? Cool the H is now detected by our X10 but that lag suck.
I suppose the Rogers version of 2.1 will correct this.. or maybe in the next version..
I get both :s
sent from canadadadada in a igloo
I find that when I'm not on the net or using data it says 3G, but while data is being sent it says H
Sent while riding my polarbear
What is H ?
Because I saw it only one time, now I got 3G or E only...
H stands for a HSPA network
sent from my 2.1 X10i using xda app
For me its the same
Sent from my X10i using XDA App
Well,
"E" is Edge, which is sort of "2.5G" (around 200kb/s, iirc).
And "H" means "HSPA" which stands for "High Speed Packet Access", HSPA is an improved version of the standard 3G (UMTS) connection and can offer speed of up to 11Mb/s on the X10.
Seems like it wasn't supported on 1.6
I thought it just didn't display the H. I always had H with my Touch Diamond. I have never seen an H on my X10!!!! Is there something wrong with my x10 or settings?
I'm getting the H too, and funny thing is that HSPA is not avaliable in Brazil yet.
Huh? Vodafone supports the H and I always had it. Anybody any idea what settings to check?
Yeah the H is a 3G+ ... But my problem here is not the letter but the irregular internet works
Sent from my X10i using XDA App
the H is 3G. some phones used to show the H symbol while uploading/downloading like the X1 XPERIA. HSPA+ is something else. right now as far as i know, the Rogers HSPA+ RocketSticks are the only devices using the HSPA+ 21Mbps speeds in Canada. The X10 is only HSPA which downloads up to 7.2Mbps. The "H" doesn't mean that you're downloading any faster (or slower) than before.
Hi, I have the same problem. Sometimes it says H, sometimes 3G.. I noticed than when it says 3g, internet doesn't work and when it changes to h it works
Sent from my X10i using XDA App
I think we are hoping for a certified 2.1 update in canada yet :-S
Sent from my X10i using XDA App
Yeah well im on an Xperia X10 rogers in Québec too (well now its unbranded and unlocked and flashed with 2.1 nordic firmware and rooted)
My problem is it wont go on to the 3g network... it just doesnt want too... its wifi or nothing right now...anyone can help?!?
blehq said:
Yeah well im on an Xperia X10 rogers in Québec too (well now its unbranded and unlocked and flashed with 2.1 nordic firmware and rooted)
My problem is it wont go on to the 3g network... it just doesnt want too... its wifi or nothing right now...anyone can help?!?
Click to expand...
Click to collapse
I got that after the 2.1 install as well. Go to Settings and then click the first option, Sony Ericsson and then download settings. And remember, with 2.1(I think) 3G is disabled when wifi is turned on!
you need to manually input your devices APN settings since it is a nordic version of 2.1, it won't have the Rogers settings built-in, nor will it be able to download it from the network.
Go to Settings -> Wireless & Networks -> Mobile Networks -> Access Point Names -> Press the Menu button -> Tap New APN -> and input the following settings:
Name: Rogers
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
and leave the rest of the settings alone.
Press the Menu button and tap Save.
Data should be working after this.
I had the same issue yesterday but today in the morning i just re flash my X10 with the Global World Firmware from the post named: "X10 Flash 2.1 Final + Global World Firmware" (Sorry i can´t attach the link, my account is new and it´s giving me an error) ...My Internet Connection from Claro Guatemala is working like a charm even though my X10 shows the H...
Thanks alot man, it works like a charm! Cheers!
azian_advanced said:
you need to manually input your devices APN settings since it is a nordic version of 2.1, it won't have the Rogers settings built-in, nor will it be able to download it from the network.
Go to Settings -> Wireless & Networks -> Mobile Networks -> Access Point Names -> Press the Menu button -> Tap New APN -> and input the following settings:
Name: Rogers
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
and leave the rest of the settings alone.
Press the Menu button and tap Save.
Data should be working after this.
Click to expand...
Click to collapse
Yeah as azian says right, this is the Rogers data setting.
But, I suggest all of you before updating 2.1 Nordic, do a backup of your system settings (With Restore and recovery program)
How would I update my x10 to 2.1 on AT&T in the U.S?
SEUS does not show that there is an update
TannerGolden said:
How would I update my x10 to 2.1 on AT&T in the U.S?
SEUS does not show that there is an update
Click to expand...
Click to collapse
This has been discussed many, many times on here and elsewhere. AT&T did NOT release the 2.1 update yet. If you are impatient, you can go here and flash the X10a world generic firmware. http://forum.xda-developers.com/showthread.php?t=825201
^^^^^^^^^
I'm a USA AT&T customer. I used that and I have had no problems that were not my fault in the first place
I to am on at&t I flashed 2.1 generic onto my phone no problems just remember to put your apn's in ajd you will jave 2.1 enjoy
Sent from my X10a using XDA App
Thread moved to Q&A.
A question for those more informed than myself
Hey Guys, wondering if you all could help me out.
I Updated my Xperia X10a on At&t using the flash method and now I cannot connect to the network... I've been looking around, but I cannot find any hits for my issue.
Basically when I go to Mobile Networks and search, it finds the AT&T Carrier, but when I click it and it tries to register it says "Your SIM card does not allow a connection to this network"
Just stumped, that's what I am...
anubis6329 said:
Hey Guys, wondering if you all could help me out.
I Updated my Xperia X10a on At&t using the flash method and now I cannot connect to the network... I've been looking around, but I cannot find any hits for my issue.
Basically when I go to Mobile Networks and search, it finds the AT&T Carrier, but when I click it and it tries to register it says "Your SIM card does not allow a connection to this network"
Just stumped, that's what I am...
Click to expand...
Click to collapse
You need to set your APN settings
Go to settings --> wireless & netwroks --> mobile networks --> access point names and creat a new APN as follows:
<name> att
<apn> wap.cingular
<proxy> wireless.cingular.com
<port> 80
<username> not set
<password> not set
<server> not set
<mmsc> http://mmsc.cingular.com
<mms proxy> wireless.cingular.com
<mms port> 80
<mcc> 310
<mnc> 410
<apn type> not set
I tried before to put an APN in, but with slightly different settings (username and passwords)...
Anywho, I tried your settings, I go to APN's and hit menu > New... Fill out all your information, then hit menu > save... It goes back to the blank apn screen... is that normal? or shouldn't it show the new one I just made?
anubis6329 said:
I tried before to put an APN in, but with slightly different settings (username and passwords)...
Anywho, I tried your settings, I go to APN's and hit menu > New... Fill out all your information, then hit menu > save... It goes back to the blank apn screen... is that normal? or shouldn't it show the new one I just made?
Click to expand...
Click to collapse
You can then go back and choose it as your default. The settings I have are 100% working.
If that does not work, try repairing your firmware with SEUS.
the screen after you click "Access Point Names" just says "APNs" at the top. When I make a new one, it doesn't show up... ideas?
Also, if I restore with SEUS, will it restore 2.1? or back to 1.6?
anubis6329 said:
the screen after you click "Access Point Names" just says "APNs" at the top. When I make a new one, it doesn't show up... ideas?
Also, if I restore with SEUS, will it restore 2.1? or back to 1.6?
Click to expand...
Click to collapse
You will restore to whatever firmware you have right now. I suggest you do this first (restore using SEUS) then enter your APN settings.
Okay, so I have done a repair through SEUS and gotten back to where I was...
Same issue... I can get into the APNs area and create a new one, but it doesn't seem to save... there is a blank area where I know there should be a list.
Also, let me express my appreciation that you are taking the time to help me.
anubis6329 said:
Okay, so I have done a repair through SEUS and gotten back to where I was...
Same issue... I can get into the APNs area and create a new one, but it doesn't seem to save... there is a blank area where I know there should be a list.
Also, let me express my appreciation that you are taking the time to help me.
Click to expand...
Click to collapse
Weird. OK try Settings --> Sony Ericsson (should be top option in the menu). Make sure you are connected to a WiFi network and try downloading the settings from SE servers.
Lol... Okay so when I go to the sony ericsson thingy...it says "could not download settings. Retry?"
I'm on wifi and I'm able to browse the internet on the phone
anubis6329 said:
Lol... Okay so when I go to the sony ericsson thingy...it says "could not download settings. Retry?"
I'm on wifi and I'm able to browse the internet on the phone
Click to expand...
Click to collapse
Hmmm..
This is a weird problem. So in your APN settings you have no profiles at all?
anubis6329 said:
Hey Guys, wondering if you all could help me out.
I Updated my Xperia X10a on At&t using the flash method and now I cannot connect to the network... I've been looking around, but I cannot find any hits for my issue.
Basically when I go to Mobile Networks and search, it finds the AT&T Carrier, but when I click it and it tries to register it says "Your SIM card does not allow a connection to this network"
Just stumped, that's what I am...
Click to expand...
Click to collapse
Guys, it is not APN issue - it says "Your SIM card does not allow a connection to this network". I had the same message before unlocking mine. But maybe I have a working hunch. When I received mine locked to TMO UK phone and tried my TMO US SIM, it just stuck on screen with network unlocking key input that is the way locked phone behaves under 1.6. But I blew away dust from my old proxy SIM card for unlocking iPhone 2008 and it worked! I was glad to save some bucks, but when I flashed 2.1, after around 16 hours I got the same error message about network and no service anymore. I had contact issue with this proxy card, so I tried several times and eventually broke it, so now I am unable to research it deeper. Without this proxy SIM card my phone behaved differently - it wanted network unlock code just after turning on. With proxy it booted silently and just showed that the network is unreachable. So I see exactly the same behavior in your phone as mine with proxy SIM card. It sounds weird and I didn't find another case like mine, but look like some way your phone is locked. I remember when iPhone wasn't cracked yet, some phones were hardware unlocked by installing some proxy cards inside the phone (by soldering), so you just need to insert your own card and it worked like unlocked. It is the only logical explanation for me now. How did you get your phone? If it is officially from ATT store, just replace it. If not - Houston, we have a problem.
No, its nothing like that... The phone is a stock att phone from an att store... It was working previously just fine and this whole mess started aster I flashed it to 2.1...
Could I have missed something while flashing I wonder?
anubis6329 said:
No, its nothing like that... The phone is a stock att phone from an att store... It was working previously just fine and this whole mess started aster I flashed it to 2.1...
Could I have missed something while flashing I wonder?
Click to expand...
Click to collapse
Probably not. The only thing is getting the APN settings and all should be working fine. This may be dumb, but are you sure you are entering all the info correctly and then saving the settings. You should then choose it as your default APN.
batman_112 said:
Probably not. The only thing is getting the APN settings and all should be working fine. This may be dumb, but are you sure you are entering all the info correctly and then saving the settings. You should then choose it as your default APN.
Click to expand...
Click to collapse
There arent any APN settings in there and when I attempt to create a new one, it doesnt save
anubis6329 said:
There arent any APN settings in there and when I attempt to create a new one, it doesnt save
Click to expand...
Click to collapse
So one more time:
Settings --> Wireless & Networks --> Mobile Networks --> Access Point Names.
Then press the far left button with the 4 boxes on top of it and click New APN and enter the settings as mentioned earlier.
If not, then try a hard reset. Remove the battery while the phone is still on, remove the SIM card and wait 10 minutes before putting it back in and turning on the phone.
I have a new what i was told is an unlocked atrix on the sasktel network. i can call and text but i can't save my apn settngs to get my internet working. the wifi works fine but not the network one. please help, my provider won't
What are your current APN settings? Go to Settings >Wireless & networks > Mobile Networks>Access Point Names
Neither will mine. Unlocked Bell Atrix on MTS.
I have no APNs listed, and they never show up once saved.
Not sure what other network settings are..but I'm unlocked on Telus and my apn settings are: sp.telus.com
When I first entered them I had so.telus.com and had phone and SMS but no mobile data until I realized my typo.
Lineman69 said:
I have a new what i was told is an unlocked atrix on the sasktel network. i can call and text but i can't save my apn settngs to get my internet working. the wifi works fine but not the network one. please help, my provider won't
Click to expand...
Click to collapse
Hello buddy,
i had the same problem and the solution that i found is to set a new apn and just set the following choices
1. Name
2. Apn
3. port
All other choices left blank.
I did that and it works perfect.
nsourm said:
Hello buddy,
i had the same problem and the solution that i found is to set a new apn and just set the following choices
1. Name
2. Apn
3. port
All other choices left blank.
I did that and it works perfect.
Click to expand...
Click to collapse
Tried that.....i can enter all the settings that is fine. but as soon as i click the menu button to "save" it goes back to the main page and shows no APN settings saved
Are you rooted?
If yes try to change the /data/data/com.android.providers.telephony/telephony.db add the apn in there
no i am not rooted i did not want to do that till i knew i got everything running.
I tried and tried to get the Bell Atrix to work.
APN Manager: no luck
Network Info II: no effect when settings changed either in OS or APN manager.
Whenever an APN was typed in, it would "save" (proven by APN Manager) but not be selectable, it just disappears once menu-save.
Returned it and purchased a Nexus S, took all of a minute to get data working.
Lineman69 said:
Tried that.....i can enter all the settings that is fine. but as soon as i click the menu button to "save" it goes back to the main page and shows no APN settings saved
Click to expand...
Click to collapse
Perhaps i didn't explain correct.
Make a new apn change the first four choices and left the other unchanged(not blank)
_Dennis_ said:
Are you rooted?
If yes try to change the /data/data/com.android.providers.telephony/telephony.db add the apn in there
Click to expand...
Click to collapse
i am rooted now. can you explain this method a little bit for me
i cant just change the first four because the MCC and the mnc are not registering i have to enter them manually. my provider says it is not reading them from the sim card for some reason. i rooted the phone now. i am going to try getting into it from there
The easiest way I found was download SQLite editor. Its a few dollars. Then open it and click yes for root. Go to dialer storage then telephony.DB. then carriers. Add your apn to the list. If eceything is correct it should work. If the phone does not read the mcc then you may be screwed though.
Sent from my HTC Desire using Tapatalk
Lineman69 said:
i am rooted now. can you explain this method a little bit for me
Click to expand...
Click to collapse
(all settings I left blank, leave blank, make sure you press menu, save to save)</br>
2) Enable Airplane Mode
(hold power button for three seconds, select Airplane Mode)
3) Open Root Explorer
4) Navigate to: /data/data/com.android.providers.telephony/databases/
5) Click on "telephony.db"** (this should open the db using SQLite Editor)
6) Select "carriers"
7) You should see a long list of APN settings for various carriers, Push the menu key to bring up the menu. Then goto new record and fill out the details from there. Make sure that the _id is sequential from the other records.
8) Press back twice to close the SQLite editor and you should be back in Root Explorer. Close Root Explorer.
9) Disable Airplane Mode
Modified from http://forum.xda-developers.com/showthread.php?t=980636
WARNING: HAVEN'T TESTED BUT SHOULD WORK
I tried the methos above when it comes to the searching the network part i get a network error because i am in airplane mode
Oh i did not have the sqlite thats why. Going to try again
ThInk i might have got it. Will know sooN
Lineman69 said:
Ok almost got it but what do you mean by
Make sure that the _id is sequential from the other records.
Click to expand...
Click to collapse
there is an _ID collum on the far left that goes from 1 to 80ish on my phone so when u fill that out im assuming you will have to make it sequential. 1 2 3 ... 85 etc etc
Ok i finaly got in there my carriers setting were in there but i added a new one with the new settings and i still have nothing
well my only other sugestion is to flash the 1.2.6 sbf and then OTA update to 1.5.7
follow http://forum.xda-developers.com/showpost.php?p=12631216&postcount=2911
http://forum.xda-developers.com/showthread.php?t=1016060
to keep root and install custom rom if that is also what you fancy
Hi ,
I have Bell Atrix, unlocked, I flashed the Franch SBF 2.1.1, and all worked well, EXCEPT..
the phone is always roaming, I cannot get data unless I check the Data roaming, there is a little (r) next to my signal all the time..
and I don't know how to fix it..I checked Build.prop, to see if there any setting there.. but I dont know which and what to look for..
my question is: is there a way or a settings that I can change to get rid of the raoaming issue.
as I said my Atrix is BELL and I am with fido..
You need the apn settings for fido, and create an access name under wireless settings - network settings -access point names.
Have a look here:
http://forum.xda-developers.com/showthread.php?t=537829
Cheers!
Bell Atrix Roaming after FR 2.1.1
NFHimself said:
You need the apn settings for fido, and create an access name under wireless settings - network settings -access point names.
Have a look here:
http://forum.xda-developers.com/showthread.php?t=537829
Cheers!
Click to expand...
Click to collapse
I did put the APN for Fido, unless I turn on the roaming data, it does not connect.. also now one seems to explain the (R) next to the signal.. why the Bell Atrix started to show me that its roaming after flashing with FR 2.1.1 sbf.. in on Montreal with FIDO and fido sim in my Atrix..
that is my real question.
Hi,
There are two numbers, MCC, and MNC in the APN, the phone will show roaming if what the network reports is different than what is setup.
MCC (mobile country code) for Canada is 302, you should have that.
MNC (mobile network code) for Fido is 370, if your APN isn't using that then you will be roaming.
http://en.wikipedia.org/wiki/Mobile_Network_Code
The French sbf may not have the canada codes in it's apns.conf, see attached file from the Bell stock firmware, you can replace /etc/apns.conf with that, then go to access point names and reset to default.
Cheers!
NFHimself said:
Hi,
There are two numbers, MCC, and MNC in the APN, the phone will show roaming if what the network reports is different than what is setup.
MCC (mobile country code) for Canada is 302, you should have that.
MNC (mobile network code) for Fido is 370, if your APN isn't using that then you will be roaming.
http://en.wikipedia.org/wiki/Mobile_Network_Code
The French sbf may not have the canada codes in it's apns.conf, see attached file from the Bell stock firmware, you can replace /etc/apns.conf with that, then go to access point names and reset to default.
Cheers!
Click to expand...
Click to collapse
I'll take a look in my apns.conf but it must have the Canada codes as I have been running the french sbf since it was leaked on my Bell version (on Bell) and never had it roam. I just had to add the Bell apn (obviously) and it worked fine.
I do have a question for you though, since you seem to know a lot about these phones, etc. On my last phone (Samsung Galaxy S), there was a secret menu code (like *#*#4636#*#*) that would take you to the network band settings. From there you could not only see what band the phone was running on, but you could SET what bands were active. Is there anything like that on the Atrix? I am curious if the modem in these non Bell sbf's like Telstra/french sbf access the 850MHz band or not.
Hi,
*#*#4636#*#* is the only one I know about. You can set GSM vs GSM only etc, that would be where you'd change bands.
The codes would only be launching an android app/service somewhere, i tried a hex edit and file search of apps, couldn't find it.
Cheers!
NFHimself said:
Hi,
*#*#4636#*#* is the only one I know about. You can set GSM vs GSM only etc, that would be where you'd change bands.
The codes would only be launching an android app/service somewhere, i tried a hex edit and file search of apps, couldn't find it.
Cheers!
Click to expand...
Click to collapse
Thanks for looking. I wasn't sure if you could even manually set anything other then selecting "USA Bands" in 4636. It's no big deal, i'm just used to being able to go in and manually select bands on my previous SGS.
My signal is fine, it was just for curiosities sake.
HI NF
I check my APN. here are the values
Name: FIDO
APN: Internet.fido.ca
USERNAME:Fido
PWD:FIDO
*****
MCC:302
MNC: 370
Those are the only values I have..
this is really strange.. according to the above, I should not be roaming.. but something changed in my phone when I first flashed the French SBF.. and is shows roaming after that flash..
this is really strange..
UPDATE: another problem : when I choose Setting->call Setting->Operator Selector, I notived two things.
the Check box next to Select Automatically is not there, I think it was there when I was on Bell Stock,
next when I choose .. Search Networks.. it searched for long time and phone stops responding, I have to Turn off .
also, when I choose Advanced Setting the Call waiting is greyed out, when I click on Caller ID I get Invalid SIM Error.. again I have to reboot to get the phone working again..
the info I have after *#*# 4636 ...
Nieigbouring CID shows as UNKNOWN..
Roaming: Roaming
NETWORK TYPE:UMTS
not sure if this will you a clue..
Hi,
Sounds like it might be an issue with the radio itself, or it could be that you are just roaming, perhaps a network outage. I would try flashing the telstra sbf, see if you get the same problem. If we had a Bell sbf would could revert back to the stock radio, so we have two options, 1.87 or 1.92. You could try just flashing the radio to see.
In my settings, I have it set to GSM (auto), nothing special there. In network settings, I have it set to automatic, under operator selection, auto is selected. I don't have roaming issues myself with either firmware, but I am not using my phone in your area. Could just be a network update in my area from being in the same boat.
Cheers!
NFHimself..
I followed your instructions about Restore the partitions.. and it works.. I dont have roaming anymore and data work.. you are the man!!! thanks so much for your help
it Worked!!!
I followed your instructions to RESTORE the phone and man.. I was so happy to see it work.. thanks so much for your help..
You're welcome, two times.
Cheers!
Can anyone post the settings for running Lumia 920 on Tmobile's network
I have 4G but the internet is really slow. I am not sure whats going on.
Thanks,
ahg1 said:
Can anyone post the settings for running Lumia 920 on Tmobile's network
I have 4G but the internet is really slow. I am not sure whats going on.
Thanks,
Click to expand...
Click to collapse
What setting? The only setting I change is from 2g to 3g when I'm at home I get Edge but when I'm at work (Philadelphia international airport) I get H and it very fast WTH going on!
Khmer123 said:
What setting? The only setting I change is from 2g to 3g when I'm at home I get Edge but when I'm at work (Philadelphia international airport) I get H and it very fast WTH going on!
Click to expand...
Click to collapse
H = HSPA+ = T-mobile's current 4g
g < 2g < 3g < H < LTE
* Cellular Settings --> highest connection speed to 3G (was set to LTE). Without this, SMS and MMS have a variety of oddities such as limiting to 70 characters, not operating reliably, etc.
* Set Internet APN
APN --> epc.tmobile.com (all other fields blank)
* Set MMS APN
APN --> epc.tmobile.com
MMSC URL --> http://mms.msg.eng.t-mobile.com/mms/wapenc
MMSC port --> 80
Max MMS size --> 1024
all other fields blank
I already am using the settings you mentioned and I get a 4G icon on top.
But the internet is really slow. Download speed is less than .1 Mbps.
I am not sure whats going on even with a 4G icon.
any suggestions?
Thanks,
nat45928 said:
H = HSPA+ = T-mobile's current 4g
g < 2g < 3g < H < LTE
* Cellular Settings --> highest connection speed to 3G (was set to LTE). Without this, SMS and MMS have a variety of oddities such as limiting to 70 characters, not operating reliably, etc.
* Set Internet APN
APN --> epc.tmobile.com (all other fields blank)
* Set MMS APN
APN --> epc.tmobile.com
MMSC URL --> http://mms.msg.eng.t-mobile.com/mms/wapenc
MMSC port --> 80
Max MMS size --> 1024
all other fields blank
Click to expand...
Click to collapse
I found out the problem.
Internet seems to be down slow in my area due to some tmobile maintenance.
I just drove away from where I live and did a speed test at bandwidthplace.com
I got nearly 30mbps with Lte and almost 10 Mbps with 3G.
Is there a way to get text messaging working with Lte?
ahg1 said:
I found out the problem.
Internet seems to be down slow in my area due to some tmobile maintenance.
I just drove away from where I live and did a speed test at bandwidthplace.com
I got nearly 30mbps with Lte and almost 10 Mbps with 3G.
Is there a way to get text messaging working with Lte?
Click to expand...
Click to collapse
You know that T-Mobile USA does not currently have LTE right?
yes, I know that but I get higher speeds if the connection is set to LTE.
ahg1 said:
I already am using the settings you mentioned and I get a 4G icon on top.
But the internet is really slow. Download speed is less than .1 Mbps.
I am not sure whats going on even with a 4G icon.
any suggestions?
Thanks,
Click to expand...
Click to collapse
nat45928 said:
H = HSPA+ = T-mobile's current 4g
g < 2g < 3g < H < LTE
* Cellular Settings --> highest connection speed to 3G (was set to LTE). Without this, SMS and MMS have a variety of oddities such as limiting to 70 characters, not operating reliably, etc.
* Set Internet APN
APN --> epc.tmobile.com (all other fields blank)
* Set MMS APN
APN --> epc.tmobile.com
MMSC URL --> http://mms.msg.eng.t-mobile.com/mms/wapenc
MMSC port --> 80
Max MMS size --> 1024
all other fields blank
Click to expand...
Click to collapse
hi,
I have my Lumia 920 unlocked from Rogers and having problem with MMS. I cant send or receive MMS. I tried more settings but no luck. I was able once, send MMS but couldn't receive.
Also, if i changed my Internet APN from epc.tmobile.com to internet2.voicestream.com, my internet speed almost doubled !!!
Anyway, my nigest concern is MMS. is anybody have idea, how to mak it work ?
Thx
vrso2 said:
hi,
I have my Lumia 920 unlocked from Rogers and having problem with MMS. I cant send or receive MMS. I tried more settings but no luck. I was able once, send MMS but couldn't receive.
Also, if i changed my Internet APN from epc.tmobile.com to internet2.voicestream.com, my internet speed almost doubled !!!
Anyway, my nigest concern is MMS. is anybody have idea, how to mak it work ?
Thx
Click to expand...
Click to collapse
VRSO2
Try using fast.t-mobile.com as your APN and use the access point app
ok
Fatawan said:
VRSO2
Try using fast.t-mobile.com as your APN and use the access point app
Click to expand...
Click to collapse
Ok, here is my problem now:
after 1308 update, Internet sharing worked great on my Rogers unlocked 920 running T-mob
But, MMS stoped working. At that point i reactivated T-mobile access point , and MMS started working again .... but, i have no internet sharing again ((
It's always taking me to T-mob web site and pay for service, which i already have
Now .....
i did try "Spanish keyboard trick" and after that, tethering (internet sharing) worked.
But, no MMS again. It looks like settings used in "Spanish mode" use different values for Access point settings.
If i could manually add access point with MMS settings and internet settings, that would be great.
Ill try call T-mob and ask for it, but it's small chance, ill get it ;(
Anybody can help in here ?
vrso2 said:
Ok, here is my problem now:
after 1308 update, Internet sharing worked great on my Rogers unlocked 920 running T-mob
But, MMS stoped working. At that point i reactivated T-mobile access point , and MMS started working again .... but, i have no internet sharing again ((
It's always taking me to T-mob web site and pay for service, which i already have
Now .....
i did try "Spanish keyboard trick" and after that, tethering (internet sharing) worked.
But, no MMS again. It looks like settings used in "Spanish mode" use different values for Access point settings.
If i could manually add access point with MMS settings and internet settings, that would be great.
Ill try call T-mob and ask for it, but it's small chance, ill get it ;(
Anybody can help in here ?
Click to expand...
Click to collapse
Did you get the answer to this?
ok
efjay said:
Did you get the answer to this?
Click to expand...
Click to collapse
ok, two things you have to know:
1, you will have to change your speed connection to 3G (sometimes dont work with LTE)
2, Delete all access points, restart your phone.
then, manually set this:
* Set Internet APN
APN --> epc.tmobile.com (all other fields blank)
* Set MMS APN
APN --> epc.tmobile.com
MMSC URL --> http://mms.msg.eng.t-mobile.com/mms/wapenc
MMSC port --> 80
Max MMS size --> 1024
all other fields blank