I searched everythere but can't find solution. I would like to block\disable\lock all hardware keys\buttons except power when device is in standby mode, I don't want it wakeup when in my pocket hit all other buttons. Maybe someone have solution?
i second this. i find myself with an empty battery and a couple of open programs because a hardware button was accidentally pressed while the phone was sitting in my pockets.
solutions?
the discussion here was no help either.
there must be a registry setting somewhere that changes this. dont need a app for this, there is enough stuff running in the memory.
It can't be done as far as I know. I've looked all over and there's nothing to be found.
sjefendin said:
there must be a registry setting somewhere that changes this.
Click to expand...
Click to collapse
Why ?
Use a hammer
dnt know in your rom,but in energy rom there is a setting wich lets do it
geppo1975 said:
dnt know in your rom,but in energy rom there is a setting wich lets do it
Click to expand...
Click to collapse
There is an option for it, but it doesn't work.
Related
I have noticed that while talking on my phone if I adjust the volume using the two buttons on the side it only adjusts the "System". I notice no change in the volume from the earpiece.
Has anyone else had this issue? Is there a fix? Or am I just an idiot doing something wrong (always a possibility)?
have you installed any registry tweaks or other programs? I tried switching to the stock window dialer and lost that function and had to switch back.
If you have disabled the HTC dialer skin, then you won't be able to control volume without installing the cab in this thread: http://forum.xda-developers.com/showpost.php?p=2718080&postcount=7
I did switch to the stock dialer. Thanks for the info.
i had another ? regarding changing the volume... when i change volume up and down it increases or decreaes 3 bars at a time.. is there a way to only make it go one bar at a time....?
i remember reading a hack out there to perform this but i cannot locate....
HELP...
if you use the stylus or if you have really really pointy fingers you can select bars inbetween the 3.
.. and then i wonder why my screen is so scratched up
iTouch24 said:
i had another ? regarding changing the volume... when i change volume up and down it increases or decreaes 3 bars at a time.. is there a way to only make it go one bar at a time....?
i remember reading a hack out there to perform this but i cannot locate....
HELP...
Click to expand...
Click to collapse
You did huh, I'd be very interested because I've been searching for this or how to do it for a while now. I can't locate where to change this, so if you can remember anything. I'ts very useful for people using their phone as an MP3 player. Let me know, 12
i remember reading on this site or ppcgeeks ,,,, will update if i find
iTouch24 said:
i remember reading on this site or ppcgeeks ,,,, will update if i find
Click to expand...
Click to collapse
That would be great I can't find it on xda, maybe ppcgeeks then, 12
I dont have this phone anymore
mods please delete/lock this thread thanks
hold the navi button and press the camera button to get the calibration screen up
ducamie said:
hold the navi button and press the camera button to get the calibration screen up
Click to expand...
Click to collapse
hiya its not that i need to calabrate ... it seems like a hardware fault ..but titanium doesnt seem to be working properly.. like its not showing up correctly ...so do i need to change the rom ...
or is there a simple way i could open up the phone and re allign the screen ? something like that..
liam12189 said:
hiya its not that i need to calabrate ... it seems like a hardware fault ..but titanium doesnt seem to be working properly.. like its not showing up correctly ...so do i need to change the rom ...
or is there a simple way i could open up the phone and re allign the screen ? something like that..
Click to expand...
Click to collapse
Hardware errors is best sent back to manufacturer to fix.
rling said:
Hardware errors is best sent back to manufacturer to fix.
Click to expand...
Click to collapse
not on warrenty.. unfortuantly .. if this was to be put on ebay as faulty what price could i get max and min
Done a search and can't find a solution...
With the 'easy to press' buttons on the HD2 the phone screen keeps powering on in my pocket (I use phone lock to stop auto dialling).
This is draining the battery...
Any way to stop this happening? Say, have just the power button only turn on the screen, after a long press for example???
eugene7 said:
Done a search and can't find a solution...
With the 'easy to press' buttons on the HD2 the phone screen keeps powering on in my pocket (I use phone lock to stop auto dialling).
This is draining the battery...
Any way to stop this happening? Say, have just the power button only turn on the screen, after a long press for example???
Click to expand...
Click to collapse
Try settings / system / keylock settings. There are options to set the buttons as non responsive except for the power button.
stevedebi said:
Try settings / system / keylock settings.
Click to expand...
Click to collapse
I have this same issue and I've got a stock 3.14 tmobile rom but when I go to settings / system /, there is no options for keylock settings. is that on a custom rom?
+1 for this
From new my phone used to have the option of locking all buttons except the power key ... until I did my first hard reset, then it vanished! I would have thought the settings app would have been in the ROM, so restored after the hard reset, but obviously not.
Anyone have a cab for it or care to extract it from their HD2?
<quote>Try settings / system / keylock settings. There are options to set the buttons as non responsive except for the power button.</quote>
Nope, no such option on my HD2...
Seems we need 'keylock.exe'
Anyone got it and know if it will work in an HD2?
Ok, at least I know I'm not unique now...
i've installed Hd2ProximityScreenOff-0.2.cab which I guess turns the screen back off quickly if an "in-pocket" button press brings the screen to life. (can't confirm what happens in my pocket, but seems to do the trick in my hand)
but I'd really like to know if someone knows how to get to this keylock setting
HeadMajor said:
I have this same issue and I've got a stock 3.14 tmobile rom but when I go to settings / system /, there is no options for keylock settings. is that on a custom rom?
Click to expand...
Click to collapse
Take a look at my signature. I'm using NRG ROM, which I highly recommend.
stevedebi said:
Take a look at my signature.
Click to expand...
Click to collapse
ahh crap, noob mistake. sorry.
any chance you can dig up where "settings / system / keylock settings" points?
maybe it points to something already in the stock rom?
HeadMajor said:
noob
Click to expand...
Click to collapse
i can install the stock rom update right from tmo, and install cabs and crap, but not yet ready to make the leap to customer roms (or android for that matter)
try pocketshield software. it has feature that turns your screen immediately off if its in pocket etc with proximity sensor, also its great and cool.
hello can you help me? sam on my s2 ics installing 4.0.3 does not work on any side key medium pressure type vibration options for data connection ... ... and the screen freezes? Instead gingerbread installing everything works perfectly? done deep clean either 1 or 2! several times! and especially in the boot after installing the app does not exit the screen typical of different languages and configurations, but turns on as if I reboot and everything was already installed!
What did I just read...
Sent from my GT-I9100 using XDA
seriously.... ...come on dude.....what do u want to say.. ....
me too had the same problems as like urs. side key doesn't lock the screen and holding it longer switches my phone off. but the flight mode, data connection mode, power off , silent mode, all are gone. holding the side button used to show a white box list containing these elements........but now it switches the phone off after holding it longer. Please help anybody to solve this issue
suhag said:
me too had the same problems as like urs. side key doesn't lock the screen and holding it longer switches my phone off. but the flight mode, data connection mode, power off , silent mode, all are gone. holding the side button used to show a white box list containing these elements........but now it switches the phone off after holding it longer. Please help anybody to solve this issue
Click to expand...
Click to collapse
Means you are probably missing your keystr file. The fix has been discussed dozens of times already. Please search for this. FYI, you will need root to implement the fix.
thanks man....u mean to say that i should prefer rooting my galaxy s2 ics 4.0.3....ok then .... but the FYI code for fixing these didnt work without rooting....hope it works after rooting
suhag said:
thanks man....u mean to say that i should prefer rooting my galaxy s2 ics 4.0.3....ok then .... but the FYI code for fixing these didnt work without rooting....hope it works after rooting
Click to expand...
Click to collapse
...
I SAID above that it wouldn't work without root. I wasn't unclear, I didn't think.
hey man it didn't work after rooting too. i m harassed man. i dont know what to do .i typed the code *#*#7594#*#* and it displayed Enable to shutdown on End call long press.....and at a the side a box appears either to tick it or not......if i tick it then long pressing directly shutdowns my phone samsung galaxy s II I9100(international version).....my firmware is I9100XXLPQ_I9100ODDLP7_I9100DDLP8_HOME.tar.md5 single file . i flashed it and rooted the firmware as u said...but the result is same. screen lock and long pressing side button doesnt work. plz explain me the whole process to solve this issue
suhag said:
hey man it didn't work after rooting too. i m harassed man. i dont know what to do .i typed the code *#*#7594#*#* and it displayed Enable to shutdown on End call long press.....and at a the side a box appears either to tick it or not......if i tick it then long pressing directly shutdowns my phone samsung galaxy s II I9100(international version).....my firmware is I9100XXLPQ_I9100ODDLP7_I9100DDLP8_HOME.tar.md5 single file . i flashed it and rooted the firmware as u said...but the result is same. screen lock and long pressing side button doesnt work. plz explain me the whole process to solve this issue
Click to expand...
Click to collapse
You didn't search the right thing. I said your keystr file is missing. You didn't mention a keystr file anywhere there.
Google this: "site:forum.xda-developers.com i9100 ics keystr"
man u are great.thank you so muck man.... thank you
did you find the solution ?? post it pleace! tnx
maxkin23 said:
did you find the solution ?? post it pleace! tnx
Click to expand...
Click to collapse
I see you found the solution. Good job.
Hi
Another problem... again... android... always some problem with it.
When i press "sym-au" key on phisical keyboard and scroll all the way down it freezes and stays there. It is possible to disable it, but it wont move, or clicking in any symbol has no effect completely unresponsive.
On virtual keyboard the same... blocking and unblocking device helps also restart. But its frustrating to remember about it. Is it any solution ? On stock rom there was no such problem.
floyyt said:
Hi
Another problem... again... android... always some problem with it.
When i press "sym-au" key on phisical keyboard and scroll all the way down it freezes and stays there. It is possible to disable it, but it wont move, or clicking in any symbol has no effect completely unresponsive.
On virtual keyboard the same... blocking and unblocking device helps also restart. But its frustrating to remember about it. Is it any solution ? On stock rom there was no such problem.
Click to expand...
Click to collapse
Scroll the last part slowly (scroll it with your finger, don't fling it), it will stay responsive, if it does freeze, doing a rotation from landscape to portrait will make it respond again.
SmG67 said:
Scroll the last part slowly (scroll it with your finger, don't fling it), it will stay responsive, if it does freeze, doing a rotation from landscape to portrait will make it respond again.
Click to expand...
Click to collapse
Thanks for tip. It helps.
So its known problem... this version of rom will be updated? Is there any way chance this will be fixed ?
floyyt said:
Thanks for tip. It helps.
So its known problem... this version of rom will be updated? Is there any way chance this will be fixed ?
Click to expand...
Click to collapse
NO, that ROM won't get any updates anymore, and the issue is present on just about all roms, apart from the original stock firmware. If it was easy to fix someone would have done that already, i guess, so i won't hold my breath.
Just think of it whenever you need something that's near the bottom, it's not that hard to live with.
SmG67 said:
Just think of it whenever you need something that's near the bottom, it's not that hard to live with.
Click to expand...
Click to collapse
I just wanted to have software completely bugs free if it was possible, your right its not hard to live with . Stock rom gave me more problems. thx bye.