Related
My qtek 9100 is dead(((
I think (iam almost shure ) taht it is g4.It starts and show a bootloader rgb
ipl 1.01
spl 1.01
RUU at the top-right corner
usb at the bottom-left (when connected to computer)
It was never unlocked in anyway.
My friend tryed to flash it with wm6 but then the clouds appered it hanged.
We've tryed to flash it with anothe rom but it just got worste - it shows only the bootloader
I've tryed wizard_love but it says that something wrong at the beggining.Other roms are hanging on 95% or 96% and swows an error
Please can you help me?shelltool is not flashing because it's cabs are not installed....And i dunno what to do iunderstood that i need some rom that ran be flashed to locked device.can you help with some links\faq's?
Sorry for my bad english....
thanx in advance....
yellowmegaman said:
My qtek 9100 is dead(((
I think (iam almost shure ) taht it is g4.It starts and show a bootloader rgb
ipl 1.01
spl 1.01
RUU at the top-right corner
usb at the bottom-left (when connected to computer)
It was never unlocked in anyway.
My friend tryed to flash it with wm6 but then the clouds appered it hanged.
We've tryed to flash it with anothe rom but it just got worste - it shows only the bootloader
I've tryed wizard_love but it says that something wrong at the beggining.Other roms are hanging on 95% or 96% and swows an error
Please can you help me?shelltool is not flashing because it's cabs are not installed....And i dunno what to do iunderstood that i need some rom that ran be flashed to locked device.can you help with some links\faq's?
Sorry for my bad english....
thanx in advance....
Click to expand...
Click to collapse
IPL/SPL 1.01 is not a G4 ,its a G3 phone,its not flashing wm6 coz its CID locked. As long as it gets into Bootloaders mode (RGB) screen,its safe.Don't flash with Shell Tool.Just download the official carrier's rom and flash it in Bootloaders mode,it'll recover back,than get it SIM/CID unlocked and then upgrade to any wm6 rom.
Now i've reached some success.I'v downloaded ROMUpdateUtility_Wizard_NoID.exe and used it with wizard love but i just reboots after a minute of clouds(((What i need to do?find a original rom and flash it?
yellowmegaman said:
Now i've reached some success.I'v downloaded ROMUpdateUtility_Wizard_NoID.exe and used it with wizard love but i just reboots after a minute of clouds(((What i need to do?find a original rom and flash it?
Click to expand...
Click to collapse
Download the official rom from here and flash it :-
http://s131209249.online.de/vodafone_software/9100.htm
Great thnx for help!!!!I'll try it and will post the result in few minutes.Hope u will still be here!
Nope.no luck(
Official rom that u advised to flash says vendor error and than tried to flash with romUpdater-noid it says open file erorr on every nbf((
Ideas?
yellowmegaman said:
Nope.no luck(
Official rom that u advised to flash says vendor error and than tried to flash with romUpdater-noid it says open file erorr on every nbf((
Ideas?
Click to expand...
Click to collapse
Perhaps the Rom package you downloaded is a corrupt download,redownload it and flash or use this RUU :-
Hhhmmm....RUU MUN says "INVALID UPDATE TOOL" "cant be used for this device" I dont understand what is wrong
Thanx A Lot For Help!!!i've Done It! It Finally Works!__:d
yellowmegaman said:
Thanx A Lot For Help!!!i've Done It! It Finally Works!__:d
Click to expand...
Click to collapse
Thanks !
Glade to hear its working
Hey guys I desperatly need help.
It was my first time flashing my titan yesterday to dvd 3.3.4 and I'm stuck on the carrier screen because I didn't update my radio before flashing.
D 3.3.4
R 1.32.00
because I didn't update my radio first, I now have mismatched rom and radio. What do I do now to avoid bricking my phone?
Can I reinstall my original Telus rom? Can I install a rom that's compatible with the stock radio 1.32.00?
bench2010 said:
Hey guys I desperatly need help.
It was my first time flashing my titan yesterday to dvd 3.3.4 and I'm stuck on the carrier screen because I didn't update my radio before flashing.
D 3.3.4
R 1.32.00
because I didn't update my radio first, I now have mismatched rom and radio. What do I do now to avoid bricking my phone?
Can I reinstall my original Telus rom? Can I install a rom that's compatible with the stock radio 1.32.00?
Click to expand...
Click to collapse
You can flash the radio via sd and it should boot. You have unlocked first with spl 2.40 or 2.47????
press the camera + power+ reset at same time to enter bootmood. This wil allow you to start over.
jjohnzon said:
press the camera + power+ reset at same time to enter bootmood. This wil allow you to start over.
Click to expand...
Click to collapse
Haha, there is no start over. He now has that rom no matter how many times he enters bootloader.
Anywho, did you unlock? If so.. Just go into bootloader, and flash via a SD card with the correct radio. You will be fine. You might have to hard reset a couple times, but it will boot.
Tyler
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
JUST TRIED TASK29..afte 4% stopped with messege not allowed
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
try to flash earlier official rom e.g 1.66 rom not from sd card but with the pc
hagba said:
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
Click to expand...
Click to collapse
Holy h*t...
Are you freaking crazy?
You MUST NOT flash a original ROM from SD card... That will overwrite the hardspl...
If you guys follow the RTFM tradition before do something you don't understand, then that would not happen...
Now you have to wait until a new hardspl is released...
Maybe you should do a task 28/29 and flash 3.14 with RUU.
Before you guys do another stupid thing... Don't try a "task 2a".
Maybe it don't brick your device, but it also will not help.
coneman23 said:
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
Click to expand...
Click to collapse
maybe try SSPL
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
artiik said:
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
Click to expand...
Click to collapse
Why you freaking guys flash an official ROM from SD-Card?
tired that all
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
coneman23 said:
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
Click to expand...
Click to collapse
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Crusoe86 said:
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Click to expand...
Click to collapse
yes i have from sd and from usb..getting 28002 not allowed.
tried mtty42.1 task 29 and task 28 55aa
still no hope.
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Crusoe86 said:
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Click to expand...
Click to collapse
it is the orginal,he bought the phone with the wwe_asia 1.66 rom with english and chinese.
as i said tried to flash to 1.66 and again with new 3.16. but still getting not allowed.
task 28 55aa should format the device but some say its working only in case of hspl.
and since my phonw now got the 3.03 spl i guess its not possible.
correct me if im wrong but my only optios seems to be jtag which cost here in some labs about 150$...
Oh my god... What shoudl I do with you?...
I don't want to brick my HD2 to try something for you...
But... Did you know something about a "Goldcard" method?
If not I will help you to create one. On other phones the Goldcard allows to flash ROMs from another Provider... For example you have a Vodafone ROM and want a Stock HTC ROM... Normally this should not work. With a Goldcard it does...
Maybe you have an old microSD Card which we can use?!
Maybe we can also try to flash it with SSPL. Did you try this, too?
I never used SSPL, maybe it did not work in Bootloder mode, but we will se this when we try it
That's really nice help, from you Crusoe86.
PINki92 said:
That's really nice help, from you Crusoe86.
Click to expand...
Click to collapse
I hope it will help the author...
I know how it feel when the own phone is broken.
My first HD2 was overrun by a car... And it takes me 5 month to repair it, because I can't get a keypad ribbon...
And my second HD2 is not really broken... My girlfriend loaned it two weeks ago for one week. She still has is, because she like the Android OS on it and until now she won't give it back to me. Now I have to wait until my Desire HD arrives me
What should I say... Women...
But... PPP works very well for her operator (BASE) on Android, I've interruptions every 5 minutes and I can be lucky if I can reconnect after each disconnect
Back to topic...
@coneman23:
I'll hope you've flashed a 2.**.50 radio (for e.g. 2.12.50) not a 2.**.51.
I've noticed, that those radios do not work with some ROMs.
Crusoe86 redirected me here.
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Crusoe86 said:
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Click to expand...
Click to collapse
I dont know how to make a goldcard, so i cant make one.
I recommend that you try this (found in your thread).
If that does not work, we can make a Goldcard.
It is not very difficult, but this solution in your thread seems to be easier if it works.
I own a new HD2....and now i think i bricked it.
I installed HSPL3 on my device and then MAGLDR113 but after reboot nothing happened just white screen and green htc logo
I tried to uninstall HSPL according to manual stated in you tube but loading got lost just after a blink.
My phone is showing this info in bootloader....
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullsHSPL 0x50
PLeaseeeeeeee help me out.....i beg all
look at my post sounds like mine
check out post 9 in this thread sounds like mine http://forum.xda-developers.com/showthread.php?t=961001
not sure if you are tmous tho you may want to start with your shipped or test masd 2.02 rom
As far I can remember, all tutorials said that hspl can be just "uninstalled".
The only way to get rid of hspl (and maglr at once) is to flash original rom
BUT FROM SD CARD.
Tutorial how to do that is in the "sticky" (third sticky in this subforum) section.
or better still, finish the process you started. . . apply a rom.
you cant just "apply hspl, apply magldr" and then stop, you gotta enter magldr and flash a wp7/android rom.
also, if you still have the original radio that shipped with your phone, it wont be high enough version to work.
enter bootloader and flash something like radio 2.11.50.x or higher.
This is not an error or fault at all, just plain user failure.
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
jeetu1981 said:
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
Click to expand...
Click to collapse
Flashing stock rom via usb wont remove hspl!
so dear, you need to know this first...magldr will install in rom replacing your wm6.5......so after you do that you need a nand android build or wp7 to use with magldr or if you want wm 6.5, no need to remove hspl, just reflash the stock 1.48 wwe rom for india...search for that in the forum...this will replace the magldr..........just be sure not to flash the new stock 3.14 wwe rom over hspl..it will produce incompatibilities like small memory....if you want 3.14 rom, first flash stock 1.48 wwe, and then using hspl, uninstall hspl (select 1.42spl )...then install 3.14 wwe rom (be sure to flash india specific roms)
rtomakov said:
Flashing stock rom via usb wont remove hspl!
Click to expand...
Click to collapse
Right, but it will atleast flash a stock ROM, HSPL can be removed later
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
parkarintl said:
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
Click to expand...
Click to collapse
That's good to hear. WP7? I flashed it yesterday and then switched back to WM in just 15 minutes, not my cup of tea.
Thanks
Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
miagii said:
Hi
Sorry for the bad English im from Germany
I flashed successfully to the 1.30 NoDo Update then i maked an mistake!
i flashed back to 1.09 and then to the Originaly T-Mobile germany! And now i want back to 1.09 to go on the NoDo 1.30 but if i want to update 1.09 i get the Error 244 invalid Model ID how can i fix it????
Click to expand...
Click to collapse
How are you trying to flash, direct from fle to phone from PC or using y split cable and goldcard? maybe to go back you need to put the ModeID file in te 1.09 folder, like you initially did in the 1.30 folder. See this post
Im flashing directly and i know the Tutorial u gave my i was already on the 1.30 NoDo Update and then i made and Downgrade to 1.09 then to 1.28 Original T-Mobile Rom.
Now i want Update again to 1.30
but if try to Flash the 1.09 Rom ( itried it with three diffrent ModelID.fig) then i get 244 Invalid Model ID
i also have this problem.
i loaded this rom onto my htc : RUU_Mozart_TMO_DE_1.28.111.03_Radio_5.52.09.16_22.24.50.09U_by_ansar
i didnt know that it has the tmobile branding within so i wanted to debrand with the 1.09.but now i always get error 244 invalid model id.isnt there any solution for this?
You have probably updated the SPL with your updates, so the first thing you'll need to do is downgrade that, and then install the ROM again. You can search in ansar posts for how to downgrade the SPL.
ok thx for help,i will try
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
diaemus9 said:
sry for double post,but i noticed that i already have spl 1.28....
i also noticed i have hardware revision number : NA n i red that its not fixable.is that true?its hard to imagine cuz i didnt really do anything,just flashed this weird branded rom n now cant go back
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1196183
Just try this. If it still has an error, it is probably a big problem.
You have to install this like any other ROM and after installation don't worry about the phone not starting up. Just install RSPL/HSPL and flash any ROM you would like.
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
diaemus9 said:
no its not working.again it stops at 1 % n then comes error 294 invalid vendor id.
its desperate
Click to expand...
Click to collapse
Have you tried a hard reset before trying to flash ? And have you installed RSPL/HSPL and what version of it ?
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
diaemus9 said:
well,i made a hard reset now,but somehow after,the data was still on my phone,means phone numbers etc.so i assume the hard reset didnt work.
i also tried to install rspl/hspl.i could install rspl,however when i install hspl my pc says i installed it succesfully.but when i launch boot loader then,it shows me the spl 1.28.xxx i had before rspl and no hspl.
its just freakin frustratin.i dunno what to do anymore
Click to expand...
Click to collapse
In order to install hspl you need to run rspl first, so if rspl doesent run you can't install hspl... You've probably flashed some really bad ROM.
The last thin that i can suggest is to try to flash some older ROM or the rom that now is in the phone and then try to flash something else... but i doubt it will work without RSPL/HSPL
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
diaemus9 said:
like i said,i did install rspl,then right after it hspl,pc says its fine but my device shows old spl after installation.it did show the rspl in boot loader but not hspl.
well i try that but doubt it will work.thx for ur effort anyway
Click to expand...
Click to collapse
Try downloading another version of RSPL/HSPL
http://forum.xda-developers.com/showthread.php?t=1195647
These are the ones that i have used. If this doesent help idk what to do next...
anyway if you cannot install HSPL then its not possible to install a ROM.
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
diaemus9 said:
nope its no use.everything i try stops at 1%.
this is useless,looks like i can put this phone into trash.the thing that makes me mad is that i could flash everything before,then flashed a rom from this forum n now thi...
Click to expand...
Click to collapse
Actually you've probably made a mistake when you flashed it back... and you've used a bad ROM... so try to ask some more experienced member, maybe they can help... sorry that i couldn't.
no,its not ur fault ,thx for ur effort.
looks like no one can help though,already searched the whole internet.n no one else responses here