Hi guys.. I am looking for a while for a solution to solve my problem with my TG01.
(After short pin method... my TG is dead)
I am looking to buy a damaged TG01 but whith the mother board ok.
radutib said:
Hi guys.. I am looking for a while for a solution to solve my problem with my TG01.
(After short pin method... my TG is dead)
I am looking to buy a damaged TG01 but whith the mother board ok.
Click to expand...
Click to collapse
Check here
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
I had my device bricked too, and they revived it for 20 $.
Check for users in your country and contact them, or you can buy the Box for 150 $.
I believe this is a very economic solution
thank you for ypur reply.
After I short pin the phone... it was not working at all. When I put the phone to charge nothing happen.. the led doesn't turn on. It is not responding to any command.
You said you had the exact same problem?
radutib said:
thank you for ypur reply.
After I short pin the phone... it was not working at all. When I put the phone to charge nothing happen.. the led doesn't turn on. It is not responding to any command.
You said you had the exact same problem?
Click to expand...
Click to collapse
There are a section in TG01 rom development how to fix your problem.
I found it http://forum.xda-developers.com/showthread.php?t=682480
Related
hi all,
the problem is the following: my COM1 port is completely dead. no application can initialize it. no application is running in the backgorund. the other COM ports, USB, IR, etc work fine. i didn't do any updates, it just went dead, one morning i wasn't able to connect to my GPS anymore. i already did a hardreset, it didn't help. anyone any ideas? thx in advance!!
Not sure what to say, sounds like a hardware issue to me. Return it for warranty repairs, I'd say...
Wasn't there a hint to turn of the irda to get the COM-Interfaces working?
Just try it. You can't loose anything....
Start->Settings->networks-irda.....
XDA developer Peter Poelman said:
Not sure what to say, sounds like a hardware issue to me. Return it for warranty repairs, I'd say...
Click to expand...
Click to collapse
yeah that's what i did.
LumpiStefan said:
Wasn't there a hint to turn of the irda to get the COM-Interfaces working?
Just try it. You can't loose anything....
Start->Settings->networks-irda.....
Click to expand...
Click to collapse
the support also told me this, but the IR was alerady off. however, i started and then canceled IR, didn't help.
thanks for your responses anyway!
I'm thinking this is impossible, but thought someone may know a solution.
I dropped my hd2 a few mths back and the screen cracked. It was fully functional up until this morning when a piece of glass was hanging out, so I pulled it off, now the touch screen wont respond, only the physical buttons.
I am looking for a way to be able to use the handset with a pc so I can do back ups of data etc..
Anyone got any ideas?
My first thought was the wifi access tool which lets you get full control of the unti via wifi, but I cannot run it.
Catch 22 situation.
Any help appreciated. Thanks.
i think its possible with mymobiler.
connect your phone via usb (active sync) and it should work...
but i'm not sure if you have to accept the installation on your phone..wouldn't be nice to you
DN41
DN41 said:
i think its possible with mymobiler.
connect your phone via usb (active sync) and it should work...
but i'm not sure if you have to accept the installation on your phone..wouldn't be nice to you
DN41
Click to expand...
Click to collapse
I'll give that a go later (cant download it in work ), hopefully no acceptance is required on the handset.
Thanks for you help
no problem mate.
maybe this could help you: broken-screen-thread
DN41
DN41 said:
no problem mate.
maybe this could help you: broken-screen-thread
DN41
Click to expand...
Click to collapse
I'm an active member of that thread and have been since April
Thanks
Off to HTC it is for my HD2
lol =)
DN41
Hey all!
First time posting here!
Have read alot of posts about SMDT, but no help on my problem.
So here it is:
I broke my Star x15i screen recently and bough a new one. New one is said to need a never pair on draivers. They gave those to me.
I followed exactly the guide (really hard to understand this Google Translate Chinese -> English thing).
Took battery out of device, connected DEVICE (Start x15i with replaced LCD)
Installed Cable drivers (MS Win 7 64bit), started 'sp multi-port download tool', Choose Data Source and DA file name. Also chose SCATTER file.
MainSensor NONE, Sub Sensor NONE. Lcd LP043LLYU04A.
Start all. Place battery inside phone
Then i hear this tõtõn (Device connected to Windows sound) and 2-3 seconds after that the other sound (device disconnected).
And then the numbers keeps going, but nothing is loading.
Since no outside image links, i made an attachment
Whats up damn it
190 views but no help?
Damn.. I really need this guys.. :S
hello DaddyStrikes
i have the same problem ....i replaced the new lcd and i facing problems to update the firmware via this tool.
Gud day to all. Does anyone have an extra x15i touch screen pad because my x15i was accidentally sated and broke its pad. ive search all of the repair shop here in philippines and nothing is available but then the internet have plenty of replacement there the problem is I have to bought it online and I have no credit card or ecard etc. to buy it online.
so im asking if there someone who is a good hearted would you please lend me your extra touch screen pad and send it to me?
I well repay you when you travel here in boracay philippines and I can tour you here.
please email with this add.; [email protected]
thank you in advance.
DaddyStrikes said:
Hey all!
First time posting here!
Have read alot of posts about SMDT, but no help on my problem.
So here it is:
I broke my Star x15i screen recently and bough a new one. New one is said to need a never pair on draivers. They gave those to me.
I followed exactly the guide (really hard to understand this Google Translate Chinese -> English thing).
Took battery out of device, connected DEVICE (Start x15i with replaced LCD)
Installed Cable drivers (MS Win 7 64bit), started 'sp multi-port download tool', Choose Data Source and DA file name. Also chose SCATTER file.
MainSensor NONE, Sub Sensor NONE. Lcd LP043LLYU04A.
Start all. Place battery inside phone
Then i hear this tõtõn (Device connected to Windows sound) and 2-3 seconds after that the other sound (device disconnected).
And then the numbers keeps going, but nothing is loading.
Since no outside image links, i made an attachment
Whats up damn it
Click to expand...
Click to collapse
You need to click start (flashing) and then connect your phone. Then you will most likely see DA 100% and get an error just like i did. I just can't manage to flash new lcd driver on my MTK 6592 Star N9800 phone.
Hi guys, I've this awesome Lumia 920, it works fine the first 15 minutes, but suddenly it gets crazy, I tried switching from 3g to 2g, changing touch settings wont work, I have this video to show you whats exactly the problem... When the phone gets crazy it vibrates and is unusable... I cant do nothing with it... locking it sometimes solve the problem, but a reboot is the temporary solution... the last owner told me he replaced the screen, I think the glass only, dont really know... is this the problem? Is there a way to solve this problem??
I have a video with the problem, I cant post links yet, but videos name is Error Lumia 920, user Cristobal Florian... thanks for your time..
This might be a more serious issue - try a facotory reset, if that doesn't help there's a great chance that it's a hardware issue... in that case Nokia Store is your only option...
if latest user make repair by own or other amateur repair, is possible this job not make very well or also Lumia have other hardware problems. unfortunately for you you cant do anything to improve bad behavior except to give Lumia to Nokia repair service
cristobalflorian said:
Hi guys, I've this awesome Lumia 920, it works fine the first 15 minutes, but suddenly it gets crazy, I tried switching from 3g to 2g, changing touch settings wont work, I have this video to show you whats exactly the problem... When the phone gets crazy it vibrates and is unusable... I cant do nothing with it... locking it sometimes solve the problem, but a reboot is the temporary solution... the last owner told me he replaced the screen, I think the glass only, dont really know... is this the problem? Is there a way to solve this problem??
I have a video with the problem, I cant post links yet, but videos name is Error Lumia 920, user Cristobal Florian... thanks for your time..
Click to expand...
Click to collapse
Hi,
I found your video - http://www.youtube.com/watch?v=s28vq-DmAkY
this is obviously digitizer problem since it's simulates touches.
If you have basic electronics skill try to disassemble your 920 and disconnect digitizer cable of course you won't be able to use your phone for anything besides hardware keys, but you will see if the problem is within the digitizer or something more serious. For how to disassemble your 920 check page 15 (touch connector) of Nokia Lumia 920 RM-820_821 L1L2 Service Manual v1.0.pdf or youtube video
I suspect that previous owner purchased cheap replacement digitizer or during assembly something goes wrong because it's very delicate and difficult task to separate digitizer from the IPS display - see this video - http://www.youtube.com/watch?v=or1mcpaVxOU
See in the comments of above video - "Richie Liu 2 weeks ago
Hello LE55ONS. I replaced my digitizer, but now I have a problem of the phone randomly pressing the back button, search button, and home screen button. It does it sporadically. Is there any fix for this? Should I just try redoing the whole process again? Could it be dust under the screen doing this? "
Thanks
Thanks Boril... you really know about this phones... Im gonna do it...
sim problem???
Im doing some trials on my phone, I has that problem only with sim, without the sim and wifi connected it works normally... Im gonna check the screen anyway but the sim seems to be part of the problem...
cristobalflorian said:
Im doing some trials on my phone, I has that problem only with sim, without the sim and wifi connected it works normally... Im gonna check the screen anyway but the sim seems to be part of the problem...
Click to expand...
Click to collapse
Hi, i have also this problem on my 920, and i have only changed the touch screen. it works perfectly without sim card, with sim card it goes crazy.
It isnt the first touch that i've changed, i've many hours of experience on other lumia and apple device, maybe a faulty bad quality touchscreen?
i've bought a new one and we will see, have you resolved your problem?
Crazy 920
Hi guys
i have the same problem and it appears as soon as you get a network (if it is on airplane mode it works perfectly normal), after soft resetting it temporally works but as soon as you make a call or receive one it appears again, and it simulates all three buttons (back, home and search), during calls it simulates the home button mainly (the screen shrinks and goes back a lot !!), also it appears as if you changed the network to 2G. I have replaced the screen before once, and it is a black 920 RM-821, HELP PLEASE !!!
Last week got one Lumia 520 with similar problem. But after few hours of trying to find problem (dissembling also) found something stupid and simple: SIM card. I put my SIM card and all problems gone.
Sent from my Lumia 920 using Tapatalk
Inquiry
Robotico92 said:
Hi, i have also this problem on my 920, and i have only changed the touch screen. it works perfectly without sim card, with sim card it goes crazy.
It isnt the first touch that i've changed, i've many hours of experience on other lumia and apple device, maybe a faulty bad quality touchscreen?
i've bought a new one and we will see, have you resolved your problem?
Click to expand...
Click to collapse
Hi Robotico92
What happened after you replaced the screen, did it solve the problem
thanks
hello to comunity,
i have the samsung galaxy s 2 gt-u9100 mobile phone and everything was perfect untill i opened the phone, the phone has problem at the back housing so i ordered a new one and replaced it, i made everything with caution and slowly. while i changed the back housing i opened the phone and everything was good untill i saw that there was no signal. i did it 2g and i see that there is onlu on raw ar the signal and sometimes none.
i opened the phone again and checked everything but saw nothing wrong. as i searched i saw that the GSM is this part and the cable that connects the antenna is this one . both of them are perfect.
i lost all my day trying with that , at start i had SlimRom 2 then i put the stock one via Odin but it didnt boot, stocked in the boot image (didnt wanted to search why ) so i flashed kernel again and then NeatRom, still no signal and then i went back to SlimRom. but the problem as i saw is not from the rom .
if anyone knows about that thing and tell me what to do i would be gladfull .
That bit is the antenna c/w speaker.There is a thread related to this about usb replacement.People mention about similar problems when they remove the antenna cable.
Heres a pic of spares I have,and look at the gold contacts on the antenna,as they need to be in good contact with the ones on the usb board.Maybe its that,or maybe new antenna is faulty.Try your old one in to eliminate that though.It could even be the antenna cable.
The thread is by someone whos name is Dugud,or similar
Edit:was close,this is it
http://forum.xda-developers.com/showthread.php?p=47066876
theunderling said:
That bit is the antenna c/w speaker.There is a thread related to this about usb replacement.People mention about similar problems when they remove the antenna cable.
Heres a pic of spares I have,and look at the gold contacts on the antenna,as they need to be in good contact with the ones on the usb board.Maybe its that,or maybe new antenna is faulty.Try your old one in to eliminate that though.It could even be the antenna cable.
The thread is by someone whos name is Dugud,or similar
Edit:was close,this is it
http://forum.xda-developers.com/showthread.php?p=47066876
Click to expand...
Click to collapse
thanks a lot for your reply my friend, my problem is not with the usb think i thing, it must be with the cable or i dunno. i had verry good signal and everything was working, now just the signal got verry low.
exept from buying repair part you say there is no fix right?
leonleonleon said:
thanks a lot for your reply my friend, my problem is not with the usb think i thing, it must be with the cable or i dunno. i had verry good signal and everything was working, now just the signal got verry low.
exept from buying repair part you say there is no fix right?
Click to expand...
Click to collapse
maybe take it to a shop with someone who knows what they are doing. I just had to do this with mine, I considered trying to get parts cheap and diy then I considered how much time and stress it could cause me = not worth it. It cost me £25 to have usb replaced, second thing I checked was the signal as I see many having problems with this - outcome is my phone is working sweet again and it only took a couple of hours of my time :cyclops:
Best of luck
Did you read that thread?.I seen a post on here once where someone said they removed that white antenna cable,then refitted it,and lost signal.Then they bought a new cable,which solved the problem.
Also, you dont know the condition of the part you changed,and theoretically you are meant to use anti static wristband and mat when your touching sensitive electronic components......lol
Sent from my SM-T210 using xda premium
theunderling said:
Did you read that thread?.I seen a post on here once where someone said they removed that white antenna cable,then refitted it,and lost signal.Then they bought a new cable,which solved the problem.
Also, you dont know the condition of the part you changed,and theoretically you are meant to use anti static wristband and mat when your touching sensitive electronic components......lol
Sent from my SM-T210 using xda premium
Click to expand...
Click to collapse
I finaly solved after 10 hours of trying. a did the patern that this guy did and it worked perfectly, but i still cant underestand what made this problem.
http://youtu.be/2Y6k5t1f7Qk