[Q] Have weak signal after repairing SOLVED - Galaxy S II Q&A, Help & Troubleshooting

hello to comunity,
i have the samsung galaxy s 2 gt-u9100 mobile phone and everything was perfect untill i opened the phone, the phone has problem at the back housing so i ordered a new one and replaced it, i made everything with caution and slowly. while i changed the back housing i opened the phone and everything was good untill i saw that there was no signal. i did it 2g and i see that there is onlu on raw ar the signal and sometimes none.
i opened the phone again and checked everything but saw nothing wrong. as i searched i saw that the GSM is this part and the cable that connects the antenna is this one . both of them are perfect.
i lost all my day trying with that , at start i had SlimRom 2 then i put the stock one via Odin but it didnt boot, stocked in the boot image (didnt wanted to search why ) so i flashed kernel again and then NeatRom, still no signal and then i went back to SlimRom. but the problem as i saw is not from the rom .
if anyone knows about that thing and tell me what to do i would be gladfull .

That bit is the antenna c/w speaker.There is a thread related to this about usb replacement.People mention about similar problems when they remove the antenna cable.
Heres a pic of spares I have,and look at the gold contacts on the antenna,as they need to be in good contact with the ones on the usb board.Maybe its that,or maybe new antenna is faulty.Try your old one in to eliminate that though.It could even be the antenna cable.
The thread is by someone whos name is Dugud,or similar
Edit:was close,this is it
http://forum.xda-developers.com/showthread.php?p=47066876

theunderling said:
That bit is the antenna c/w speaker.There is a thread related to this about usb replacement.People mention about similar problems when they remove the antenna cable.
Heres a pic of spares I have,and look at the gold contacts on the antenna,as they need to be in good contact with the ones on the usb board.Maybe its that,or maybe new antenna is faulty.Try your old one in to eliminate that though.It could even be the antenna cable.
The thread is by someone whos name is Dugud,or similar
Edit:was close,this is it
http://forum.xda-developers.com/showthread.php?p=47066876
Click to expand...
Click to collapse
thanks a lot for your reply my friend, my problem is not with the usb think i thing, it must be with the cable or i dunno. i had verry good signal and everything was working, now just the signal got verry low.
exept from buying repair part you say there is no fix right?

leonleonleon said:
thanks a lot for your reply my friend, my problem is not with the usb think i thing, it must be with the cable or i dunno. i had verry good signal and everything was working, now just the signal got verry low.
exept from buying repair part you say there is no fix right?
Click to expand...
Click to collapse
maybe take it to a shop with someone who knows what they are doing. I just had to do this with mine, I considered trying to get parts cheap and diy then I considered how much time and stress it could cause me = not worth it. It cost me £25 to have usb replaced, second thing I checked was the signal as I see many having problems with this - outcome is my phone is working sweet again and it only took a couple of hours of my time :cyclops:
Best of luck

Did you read that thread?.I seen a post on here once where someone said they removed that white antenna cable,then refitted it,and lost signal.Then they bought a new cable,which solved the problem.
Also, you dont know the condition of the part you changed,and theoretically you are meant to use anti static wristband and mat when your touching sensitive electronic components......lol
Sent from my SM-T210 using xda premium

theunderling said:
Did you read that thread?.I seen a post on here once where someone said they removed that white antenna cable,then refitted it,and lost signal.Then they bought a new cable,which solved the problem.
Also, you dont know the condition of the part you changed,and theoretically you are meant to use anti static wristband and mat when your touching sensitive electronic components......lol
Sent from my SM-T210 using xda premium
Click to expand...
Click to collapse
I finaly solved after 10 hours of trying. a did the patern that this guy did and it worked perfectly, but i still cant underestand what made this problem.
http://youtu.be/2Y6k5t1f7Qk

Related

Problem with front-speaker

Hi all!
I have a problem with my mini pro and would be most thankfull, if anyone could help.
Since a while now, my front speaker is not working anymore. I am using my phone with an unlocket bootloader, custom kernel and custom rom. First I thought this might have to do with that, since I first noticed it after trying an ICS beta (CM9). I did go back to SE-kernel and also restored everything with SEUS, but nothing worked. I have used various kernels and roms since, but my front speaker has not been working again.
Today I got a new speaker and changed it myself. Unfortunately, this still did not bring any changes, no sound at all.
Now I am a bit clueless, if this is really a hardware-issue or could be software related after all??
If any of you has any idea on the topic, it would be great.
All the best,
Jonathan
DerJonathan said:
Hi all!
I have a problem with my mini pro and would be most thankfull, if anyone could help.
Since a while now, my front speaker is not working anymore. I am using my phone with an unlocket bootloader, custom kernel and custom rom. First I thought this might have to do with that, since I first noticed it after trying an ICS beta (CM9). I did go back to SE-kernel and also restored everything with SEUS, but nothing worked. I have used various kernels and roms since, but my front speaker has not been working again.
Today I got a new speaker and changed it myself. Unfortunately, this still did not bring any changes, no sound at all.
Now I am a bit clueless, if this is really a hardware-issue or could be software related after all??
If any of you has any idea on the topic, it would be great.
All the best,
Jonathan
Click to expand...
Click to collapse
Bro I had the same issue with my phone.. It is the flex which goes from the motherboard to the lcd part (upper half of the slide) which might be damaged probably causing no connection to the front speaker.. U get it replaced by the SE serice center.. Thats the only way.. hope it helps..
Sent from my U20i using xda premium
Please explain the sense of your silly full-quote!
I never understand why people quote the whole post when answering directly to a post.
steiff said:
Please explain the sense of your silly full-quote!
I never understand why people quote the whole post when answering directly to a post.
Click to expand...
Click to collapse
Does it really matter.. ?!! Atleast I am helping him out and If you cant help others stop posting crap.. !!
Peace..
Sent from my U20i using xda premium
Hi there, first of all, dissasemble your cellphone, here you have the service manual, it has everything you could need to make a hardware rapair, including dissasemble and reassemble videos. http://www.cpkb.org/wiki/Sony_Ericsson_E10i_Xperia_X10_mini_service_manual
Once you obtained acces to the speaker, test it, you can do it taking a wire with a 3.5 plug on one end, and bare wires on the other end, by plugin it on an mp3 player and making sound going trough the speaker. If your speaker works, you will have to take the schematics from the service manual, follow the circuit and locate the failure. Most common failures are a flex broken or pressure contacts failure but you can have problems like this one, that are more difficult to find and solve http://forum.xda-developers.com/showthread.php?t=1472440. If your speaker doesn't works, just replace it.
Any problem just say it
Sorry, The service manual for The mini pro is here! http://www.cpkb.org/wiki/Sony_Ericsson_U20_Xperia_X10_Mini_Pro_service_manual
Sent from my E10i using XDA App
Thank you all very much for your replies!
It sounds like you all do believe it must be a mechanical problem. I allready changed the fron speaker by myself, but it is still not working. I will see how the flex looks!
But it is good to know, none of you thinks, it could be something with the custom rom/kernel
same problem for me man!
have you solved the problem after all?
i've tried to check with a tester and it seems that there isn't signal on the two contacts of the speaker...so i think the problem isn't the speaker but it is on some connection!! (maybe the main plan connector that connect the keyboard part with the sceen part)

Mic on phone not working. Help please?

Hi.
The mic on my phone has stopped working so no one can here me now during a phone call. I've tried a factory reset and re-installing my current rom checkrom v6. Still the problem is there.
It seems to me to be a hardware problem. My niece dropped my phone onto a dinner plate and got tomato sauce on it. Not a lot but some of it got into the speaker and micro usb port. I cleaned it immediately but looks like it's caused some damage.
Can anyone offer me a solution to this problem.
I'm thinking I'll need to replace the mic on the phone. Can anyone link me to a guide on how to do this? I'll probably replace the usb port as I've had issues with that for ages now.
Thanks
If you are not a person who is able to fix phones and such then I'd advise you to simply send the phone back to your carrier and tell them to fix it. (if you've still got your warranty)
Unlucky :/ Maybe next time don't let your niece near the phone within a 5 mile radius?
Have a good day and good luck with the phone :]
beston94 said:
If you are not a person who is able to fix phones and such then I'd advise you to simply send the phone back to your carrier and tell them to fix it. (if you've still got your warranty)
Unlucky :/ Maybe next time don't let your niece near the phone within a 5 mile radius?
Have a good day and good luck with the phone :]
Click to expand...
Click to collapse
I'm on pay as you go and I bought the phone second hand about 7 month ago so sending it back not really an option.
Just to update, when I turn on the speaker function when in call the mic works fine.
johnbhoyc said:
Can anyone offer me a solution to this problem.
I'm thinking I'll need to replace the mic on the phone. Can anyone link me to a guide on how to do this? I'll probably replace the usb port as I've had issues with that for ages now.
Thanks
Click to expand...
Click to collapse
I believe the part for the USB port will have the lower mic attached anyways. I think you're looking for part number GH59-10949A. You can find service manuals for various Samsung phones on www.samfirmware.com. But you'll need to register on that site (it's free) to download them. Passwords on the archive files are "samfirmware.com".
johnbhoyc said:
I'm on pay as you go and I bought the phone second hand about 7 month ago so sending it back not really an option.
Just to update, when I turn on the speaker function when in call the mic works fine.
Click to expand...
Click to collapse
That's because the speakerphone function uses the top mic, not the bottom mic.
ctomgee said:
I believe the part for the USB port will have the lower mic attached anyways. I think you're looking for part number GH59-10949A. You can find service manuals for various Samsung phones on www.samfirmware.com. But you'll need to register on that site (it's free) to download them. Passwords on the archive files are "samfirmware.com".
That's because the speakerphone function uses the top mic, not the bottom mic.
Click to expand...
Click to collapse
Thanks for your reply Very helpfull.
Can anyone recommend somewhere to buy the usb port. Preferably UK based for speedy delivery.
Thanks
Got part delivered and fitted it today. Everything working fine now. USB problem I've
Got part delivered and fitted it today. Everything working fine now. USB problem I've been having for a while fixed as well.
Only problem I encountered was one of the screw heads was worn away. Had to drill it out but got their in the end.
Thanks for your help folks
johnbhoyc said:
Got part delivered and fitted it today. Everything working fine now. USB problem I've been having for a while fixed as well.
Only problem I encountered was one of the screw heads was worn away. Had to drill it out but got their in the end.
Thanks for your help folks
Click to expand...
Click to collapse
Glad you got it worked out.
If you're interested, to help with protecting my USB port, I ordered some of these. They come 3 covers per order.
(I am in no way affiliated with this company...)
I decided it was prudent after reading all the horror stories on the forums about USB ports failing/overvoltage warnings/computers not detecting/chargers not registering.

unresolved microphone issue after USB flex replacement

Hello,
I have a major problem with my lower microphone (on the USB flex board), the microphone does not register much sound at all (very faint sounds are possible if you scream as loud as possible into the microphone directly).
I have replaced the USB flex board (properly, everything is connected correctly and the USB port works perfectly), but the microphone is exactly the same...
Anyone have any ideas? It seems a couple of people have similar issues, has anyone found a fix yet?
Also, does anyone perhaps have any ideas about how to force the top microphone (speaker phone mic) to engage as the active microphone during regular voice calls? I am 100% sick of using speaker phone for every voice call, especially considering I need to make private/confidential calls for work :\
and yes, I have removed the rubber housing as well and tested it without it, it makes zero difference.
Youve tried to repair it on rhe cheap and failed.Maybe take it to a repair shop and get it done properly.
And from your other thread,the spare one I have here has part no gt-i9100 rev2.2(so maybe the one you bought is still faulty )
Sent from my GT-I9100
So you've followed me to my thread because I made a post you didn't like in another thread, and offered complete shinfo.
Please, do not post again.
I am a fourth year EE student, I know how to replace a minor circuit board correctly.
Anyone who has any real advice, specifically about whether or not this may be some form of software issue, and with regards to my question about using the other microphone in voice calls, please let me know.
My mistake-I thought I was replying to a poster named Bodurr as he made a couple of threads about mic problems aswell.
He replaced the board and its still not working.
And I see what you mean about the other thread-I can assure you I never twigged it was you.
Anyway,if you require help,its advised to state what rom etc your running.That way someone could say "if your rooted make a nandroid backup then flash stock rom and see if problem persist".
Sent from my GT-I9100
I'm using rootbox ICS rom version 1.7, android 4.0.4 with siyah kernel v3.4.
Have made a nandroid backup and reflashed to stock a couple of times (including stock kernel and then CF root kernel) and nothing makes any difference.
The issue started whilst on gingerbread and has now carried on to ICS...
I'm seriously completely stumped and have no idea what is causing it :\
I've had a quick look and its advised to test using voice recorder to eliminate a hardware issue.
Other thing mentioned was to change audio values(but maybe need to be on GB to access and change values in the *#197328640# menu.
I don't know if you've done this already.
Sent from my GT-I9100
Just tested again with voice recorder (first time I have done this since swapping the USB flex board) and it's exactly the same issue.
There is SOME sound, but you need to have the volume on full with your ear right against the speaker to hear it, and it's still very faint like that.
What a bizarre issue, it seems no-one knows how to fix it either :\
GT-i9100 mic flex problem
lolthrash said:
Just tested again with voice recorder (first time I have done this since swapping the USB flex board) and it's exactly the same issue.
There is SOME sound, but you need to have the volume on full with your ear right against the speaker to hear it, and it's still very faint like that.
What a bizarre issue, it seems no-one knows how to fix it either :\
Click to expand...
Click to collapse
Did you ever find a solution to this? I too had usb/battery problems so changed my flex to very simalar rev2.2 but only to have the same mic problems
BigSilver said:
Did you ever find a solution to this? I too had usb/battery problems so changed my flex to very simalar rev2.2 but only to have the same mic problems
Click to expand...
Click to collapse
experiencing exactly the same issue, replaced the USB flex and now have no microphone pickup on voice calls / voice recorder apps.
using ICS so not got the service mode audio options available (says BLOCKED)
don't know where I've gone wrong? maybe the part wasn't exactly right? I got it from here > http://pages.ebay.com/link/?nav=item.view&id=251069751004
Heres someone that lists a seller and he says he has no problems.
Same here
lolthrash said:
Hello,
I have a major problem with my lower microphone (on the USB flex board), the microphone does not register much sound at all (very faint sounds are possible if you scream as loud as possible into the microphone directly).
I have replaced the USB flex board (properly, everything is connected correctly and the USB port works perfectly), but the microphone is exactly the same...
Anyone have any ideas? It seems a couple of people have similar issues, has anyone found a fix yet?
Also, does anyone perhaps have any ideas about how to force the top microphone (speaker phone mic) to engage as the active microphone during regular voice calls? I am 100% sick of using speaker phone for every voice call, especially considering I need to make private/confidential calls for work :\
Click to expand...
Click to collapse
Up here, anyone found solution for this issue? I'm experimenting now the same problem with microphone after replacing the USB flex board...
Thanks
Yeah, got the solution. It's actually the board/flex cable itself. Took me three boards to find that out. There is a lot of b-ware boards on eBay that were actually thrown out by Samsung because they did not pass QC. Just get a genuine spare part and your mic will be fine.
Gesendet von meinem GT-I9100 mit Tapatalk 2
confusy said:
Yeah, got the solution. It's actually the board/flex cable itself. Took me three boards to find that out. There is a lot of b-ware boards on eBay that were actually thrown out by Samsung because they did not pass QC. Just get a genuine spare part and your mic will be fine.
Gesendet von meinem GT-I9100 mit Tapatalk 2
Click to expand...
Click to collapse
damn, i got the same then... its gonna be hard to get a proper board... I was thinking maybe, it had some kind of security by solder like lasers...
There's a little difference between 2.2 and 2.3, a single resistor, could it be?
Also, can't connect USB in Mass storage...
confusy said:
Yeah, got the solution. It's actually the board/flex cable itself. Took me three boards to find that out. There is a lot of b-ware boards on eBay that were actually thrown out by Samsung because they did not pass QC. Just get a genuine spare part and your mic will be fine.
Gesendet von meinem GT-I9100 mit Tapatalk 2
Click to expand...
Click to collapse
Did you get the Rev 2.2 or 2.3?
RoRo1990 said:
Did you get the Rev 2.2 or 2.3?
Click to expand...
Click to collapse
R2.3
Tapatalked from my SGS2!
confusy said:
R2.3
Tapatalked from my SGS2!
Click to expand...
Click to collapse
Hmm some people are saying 2.3 won't be compatible. Was your phone originally 2.2 or 2.3? Also how do I tell if it is genuine? If it says oem?
Why wouldn't it be compatible. A higher revision number usually suggests that something has been improved. BTW I initially had a 2.2 sub circuit board, now it's 2.3.
Well the new board should look like the old one. I think I took a picture the day I switched my board out. I'll try too find it later.
Tapatalked from my SGS2!
confusy said:
Why wouldn't it be compatible. A higher revision number usually suggests that something has been improved. BTW I initially had a 2.2 sub circuit board, now it's 2.3.
Well the new board should look like the old one. I think I took a picture the day I switched my board out. I'll try too find it later.
Tapatalked from my SGS2!
Click to expand...
Click to collapse
I'm looking at two 2.3 models. One seems teal colored the other is a dark blue. Which one is the oem? Actually which color is yours?
RoRo1990 said:
I'm looking at two 2.3 models. One seems teal colored the other is a dark blue. Which one is the oem? Actually which color is yours?
Click to expand...
Click to collapse
The second one looks just like mine. But the OEM part actually comes with a grey mic enclosure. Make sure your part comes with it.
Tapatalked from my SGS2!

[Q] Charging Flex Cable Problem

Hi, I have the Galaxy Note i717 and had to replace my charging port as it had stopped charging reliably. I bought one of the many on ebay for around 8 bucks. I proceeded to put it in when I received it but to my dismay I no longer could get service at all, just wifi. So just to verify it was nothing I broke I put the old pcb back in and service returned. At that time I believed it was just a defective unit, so second try at it same thing no service old one works fine. Is this a problem anyone has ran into before? Any help I would appreciate.
jpeeler said:
Hi, I have the Galaxy Note i717 and had to replace my charging port as it had stopped charging reliably. I bought one of the many on ebay for around 8 bucks. I proceeded to put it in when I received it but to my dismay I no longer could get service at all, just wifi. So just to verify it was nothing I broke I put the old pcb back in and service returned. At that time I believed it was just a defective unit, so second try at it same thing no service old one works fine. Is this a problem anyone has ran into before? Any help I would appreciate.
Click to expand...
Click to collapse
It is quite possible that either your new port is the wrong part, or is damaged.
The port wiring is different between models ...I.E. SGH-I717, N7000, and other note models.
Even the charge cables are different part numbers between models, but visually look identical.
It just sounds like the port wiring is different to me ..
I suggest getting the port directly from samsung...even though it will cost a bit more.
At least then you have a fall back if the port won't function.
Or perhaps have the port repaired by Samsung directly ....
I'm sorry I can't offer more help .g
gregsarg said:
It is quite possible that either your new port is the wrong part, or is damaged.
The port wiring is different between models ...I.E. SGH-I717, N7000, and other note models.
Even the charge cables are different part numbers between models, but visually look identical.
It just sounds like the port wiring is different to me ..
I suggest getting the port directly from samsung...even though it will cost a bit more.
At least then you have a fall back if the port won't function.
Or perhaps have the port repaired by Samsung directly ....
I'm sorry I can't offer more help .g
Click to expand...
Click to collapse
Well both pcb boards that they sent me have the same markings as the one I removed. They also say on them SGH_I717_SUB_REV1.0_1107
So I do believe it to be the correct part. Just to clarify the new boards do charge the phone just cellular service stops. Maybe by some crazy luck I got two faulty boards. I wasn't sure they were going to send me a replacement so I ordered from another company as well so I guess I will have to see if that one works,
Interesting ....
The part seems okay ...
And the odds of two bad ports in a row is remote at best ....
Some time ago I saw a thread about an extra wire that traveled down from the antenna to the charging port....
And users were reporting that this very small wire was being damaged or missed when the port was serviced.
I've never seen this wire or connection ......but I figured I'd bring it up ..
Try a general search on the topic ...and see if it yields a result.....
I just remember it being a big deal ....g
Just wanted to update the post in case this happens to anyone else. After getting the free replacement for the first part I believed to be defective I also ordered from another company as it took more than a month for my replacement, so I believed them to had stood me up. Well the one from the other company arrived today, and worked. Maybe the others were for different networks or something. I don't know if that is possible Rogers vs ATT frequencies and what not but it worked and all is well.
jpeeler said:
Just wanted to update the post in case this happens to anyone else. After getting the free replacement for the first part I believed to be defective I also ordered from another company as it took more than a month for my replacement, so I believed them to had stood me up. Well the one from the other company arrived today, and worked. Maybe the others were for different networks or something. I don't know if that is possible Rogers vs ATT frequencies and what not but it worked and all is well.
Click to expand...
Click to collapse
I am having issues as well...
My phone has a Rev1.0_1107 part, and I cannot charge unless I play with the cable, so i decided to replace this port.
1st was from China (ebay) and received no signal, only wifi. Rev1.0_1107
2nd was a replacement from the same company, same issue. Rev1.0_1107
3rd was from a place in CA (ebay) and is Rev2.0_1206 and same issues.
I can put my original part in there, and I get signal just fine... anybody have any ideas on this matter? It's frustrating to have to keep battery swapping and would like to get this fixed.
MisterLas said:
I am having issues as well...
My phone has a Rev1.0_1107 part, and I cannot charge unless I play with the cable, so i decided to replace this port.
1st was from China (ebay) and received no signal, only wifi. Rev1.0_1107
2nd was a replacement from the same company, same issue. Rev1.0_1107
3rd was from a place in CA (ebay) and is Rev2.0_1206 and same issues.
I can put my original part in there, and I get signal just fine... anybody have any ideas on this matter? It's frustrating to have to keep battery swapping and would like to get this fixed.
Click to expand...
Click to collapse
The one that finally worked for me was from ebay company (no.1-tech) also china but has been operating flawlessly for sometime now.
jpeeler said:
The one that finally worked for me was from ebay company (no.1-tech) also china but has been operating flawlessly for sometime now.
Click to expand...
Click to collapse
Noted... thanks. I have searched them out and they only appear to have the cable for the N7000. Can anyone else recommend a place to buy these from?
Just noticed that when it's near my window, I get 1 bar of service... So it's like my signal strength is uber weak. I have a microcell in my home, and it is functioning properly (other ATT phones are connecting just fine) and works again as soon I put the original cable back.
Hi,I have a samsung Note N7000.
I'm have a similar issue,start with high power charging issue every 5seconds.I bought a replacement from ebay company in New Jerse it fixed that problem.but it created a problem when I make a call the other end can not hear me.I email the company and they sent #2 replacement.after
the charging port board was installed now I dont have any signal for service.the pcb# N7000/i9220_sub_Rev1.0.
I'm going try different company.what should I be looking for?I'm wasting too much time on this.
johnson1828 said:
Hi,I have a samsung Note N7000.
I'm have a similar issue,start with high power charging issue every 5seconds.I bought a replacement from ebay company in New Jerse it fixed that problem.but it created a problem when I make a call the other end can not hear me.I email the company and they sent #2 replacement.after
the charging port board was installed now I dont have any signal for service.the pcb# N7000/i9220_sub_Rev1.0.
I'm going try different company.what should I be looking for?I'm wasting too much time on this.
Click to expand...
Click to collapse
Having exact the same problem.. just a moment ago I tried the third board and still hacing exact same problem, no signal or one bar only when I have one bar I can make a call but the other end can not hear me
gregsarg said:
Interesting ....
The part seems okay ...
And the odds of two bad ports in a row is remote at best ....
Some time ago I saw a thread about an extra wire that traveled down from the antenna to the charging port....
And users were reporting that this very small wire was being damaged or missed when the port was serviced.
I've never seen this wire or connection ......but I figured I'd bring it up ..
Try a general search on the topic ...and see if it yields a result.....
I just remember it being a big deal ....g
Click to expand...
Click to collapse
Sorry to bring up an old thread but I wanted to bring this to others attention. What Gregsarg said about a white wire running down from the antenna is correct, or at least it is on an i717. It runs down from the right hand side of the board, behind where the flex board connects and onto the little round connector on the flex board, it's probably that that's been missed off of some phones as would be noticed by only getting 1 bar of signal! I've also noticed that the UK version of the note only has 4 brass connectors on the flex board 2 for the antenna and 2 for the speaker whereas the i717 has 5, 3 for the antenna and 2 for the speaker. I'm not sure what the difference is between a white or black i717 to be honest, i'd have thought it would only be the outer casing that had changed, I can't see them changing parts too, that just sounds stupid!
Anyway, the reason I'm posting is not just because of the above, it's because i'm in the middle of fixing an i717 for someone and was searching to see if a N7000 part would fit and although it looks as though it would I'm not willing to test that theory! I will say though that the missing brass connector is also connected to brass connector 2 on the Ariel/speaker module but on the flex board that connector also has a resistor above it which would likely cause an issue!
The part that i'm ordering is from a company in the UK but is a Rev 2.0 board and not the rev 1.0 that is in it already so i'm hoping that's not an issue else i'm gonna have to buy from China which is cheaper but will likely take an age to get here and the customer wants it done ASAP so what they want they get! I will update this thread once i've fitted the part and got it running along with a link to where I got it from.
h4x0rm1k3 said:
Sorry to bring up an old thread but I wanted to bring this to others attention. What Gregsarg said about a white wire running down from the antenna is correct, or at least it is on an i717. It runs down from the right hand side of the board, behind where the flex board connects and onto the little round connector on the flex board, it's probably that that's been missed off of some phones as would be noticed by only getting 1 bar of signal! I've also noticed that the UK version of the note only has 4 brass connectors on the flex board 2 for the antenna and 2 for the speaker whereas the i717 has 5, 3 for the antenna and 2 for the speaker. I'm not sure what the difference is between a white or black i717 to be honest, i'd have thought it would only be the outer casing that had changed, I can't see them changing parts too, that just sounds stupid!
Anyway, the reason I'm posting is not just because of the above, it's because i'm in the middle of fixing an i717 for someone and was searching to see if a N7000 part would fit and although it looks as though it would I'm not willing to test that theory! I will say though that the missing brass connector is also connected to brass connector 2 on the Ariel/speaker module but on the flex board that connector also has a resistor above it which would likely cause an issue!
The part that i'm ordering is from a company in the UK but is a Rev 2.0 board and not the rev 1.0 that is in it already so i'm hoping that's not an issue else i'm gonna have to buy from China which is cheaper but will likely take an age to get here and the customer wants it done ASAP so what they want they get! I will update this thread once i've fitted the part and got it running along with a link to where I got it from.
Click to expand...
Click to collapse
When getting the part, Revision usually does matter. Also the serial number under the revision number (Usually starting with DRC or DRG) can also matter. Getting the identical one is usually the best bet (albeit not the easiest considering people on ebay use stock images and don't show you the ACTUAL part you're getting.)
KaboodleMoon said:
When getting the part, Revision usually does matter. Also the serial number under the revision number (Usually starting with DRC or DRG) can also matter. Getting the identical one is usually the best bet (albeit not the easiest considering people on ebay use stock images and don't show you the ACTUAL part you're getting.)
Click to expand...
Click to collapse
I got the new part this morning, it was a REV 2.0 board and after putting it all back together including the white/grey ariel wire I can report that it's working perfectly, as good a signal as it had before and is now charging properly. The link to the UK based seller is here for anyone interested that needs a replacement in the UK - http://www.ebay.co.uk/itm/300819833823?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 The part is £19.99 with no P&P and arrived in 1 day. Just in case the link doesn't work then the name of the supplier is gravedigga1.
EDIT:- I heard back from my customer today who has reported having problems with wifi, signal and loudspeaker! Therefore the Rev 2.0 part won't act as a decent replacement for the Rev 1.0 unfortunately. I wasn't able to fully test as the customer didn't leave his sim card in and he uses 1 of those weird networks which I don't have a sim for. I have managed to source another UK supplier on ebay for an even cheaper price of £12 and they verified that it is a Rev 1.0 board they have in stock and have put 1 aside for me. Once I know that one works for definite i'll report back again just to update the thread but this time the customer is bringing the phone when the new part is here so it can be tested fully before it goes back to him!
I just find it strange that even though the Rev 2.0 is exactly the same in every way as the Rev 1.0 board that it has these issues although i've not heard of the loudspeaker problem before so I think there's a fault with it anyway.
Yeah these notes are getting really dodgy in their old age. We've decided to basically not fix abutting except the screens anymore because getting the right parts is a nightmare.
Sent from my DROID BIONIC using xda app-developers app
This may be a little off key here and if I'm in the wrong thread I apologize but...
I have the i717, bought the charging port off of eBay and replaced it. After plugging in the phone the touch keys at the bottom lit up like I was in business. After allowing the phone to "charge" for about 2 hours, the touch keys were the only thing to work and light up on the phone. I could press the lock key on the side and the touch keys would come off and on like it was on the lock screen but the screen was black. Has anyone encountered this before? If so, please help!
Thank you
Btw, it seemed like the phone was charged/charging bc those touch keys were on...
samsung sgh-i717 usb port
Well I have tried three different suppliers and I have not found a board that works correctly . Some boards that network strength is weak , some boards the microphone doesn't work , some boards that speaker won't play . I have reinstalled my original board back in my phone and every time it returns back to working properly. I just need the USB /charge port to work . Please if you have any ideas let me know ib6469 @ yahoo . com . Thank you very much for or help
Pease Help..i717..charge port
Hello ,
My name is Russ and I have a Samsung Galaxy Note SGH-i717 ( AT&T ) which I love . About two months ago the charge port quit working , so I ordered one from Ebay ( Flex cable , Mic/USB board ) , installed it and my signal was weak after installing it so I reinstalled the original board and it went back to full power . I thought it was a bad board , so they sent me another , I installed board #2 and the speaker on the back had no sound , put my board back in and the speaker went back working . So I had the supplier send me another board #3 . I got it installed , and the Mic wouldn't pick up , I put my board back in everything goes back to normal . So I thought it might be the supplier , so I tried a different supplier , same thing . In total I have tried three different suppliers and I lost count on how many boards I have installed .. Every time I can reinstall the original board and it will stop whatever it's doing wrong . My board Number is SGH_I717_SUB_REV1.0_1107 , DRBL12IN BF , 69 . I am at a lost , I don't know if there's something I'm doing wrong . Thank You for your time ib6469 ( Russ )
same issu
Please let me know if anyone has had any luck finding a board that works... i am in the exact same boat... email me at bnanda0827 at yahoo.com
ib6469 said:
Well I have tried three different suppliers and I have not found a board that works correctly . Some boards that network strength is weak , some boards the microphone doesn't work , some boards that speaker won't play . I have reinstalled my original board back in my phone and every time it returns back to working properly. I just need the USB /charge port to work . Please if you have any ideas let me know ib6469 @ yahoo . com . Thank you very much for or help
Click to expand...
Click to collapse
note charching port
hi
i purchase this part from 6 different company but same problem no signal charging port works ok.
any boby have solution please let me know.its very annoing.
joe
zia_uddin said:
hi
i purchase this part from 6 different company but same problem no signal charging port works ok.
any boby have solution please let me know.its very annoing.
joe
Click to expand...
Click to collapse
So it looks like basically fixing the charge port on a galaxy note just isn't going to hapen if you want service. Nobody has found a solution?

[Q] Galaxy Note charge port replacement problems

My name is Russ and I have a Samsung Galaxy Note SGH-i717 ( AT&T ) which I love . About two months ago the charge port quit working , so I ordered one from Ebay ( Flex cable , Mic/USB board ) , installed it and my signal was weak after installing it so I reinstalled the original board and it went back to full power . I thought it was a bad board , so they sent me another , I installed board #2 and the speaker on the back had no sound , put my board back in and the speaker went back working . So I had the supplier send me another board #3 . I got it installed , and the Mic wouldn't pick up , I put my board back in everything goes back to normal . So I thought it might be the supplier , so I tried a different supplier , same thing . In total I have tried three different suppliers and I lost count on how many boards I have installed .. Every time I can reinstall the original board and it will stop whatever it's doing wrong . My board Number is SGH_I717_SUB_REV1.0_1107 , DRBL12IN BF , 69 . I am at a lost , I don't know if there's something I'm doing wrong . Thank You for your time ib6469 ( Russ )
ib6469 said:
My name is Russ and I have a Samsung Galaxy Note SGH-i717 ( AT&T ) which I love . About two months ago the charge port quit working , so I ordered one from Ebay ( Flex cable , Mic/USB board ) , installed it and my signal was weak after installing it so I reinstalled the original board and it went back to full power . I thought it was a bad board , so they sent me another , I installed board #2 and the speaker on the back had no sound , put my board back in and the speaker went back working . So I had the supplier send me another board #3 . I got it installed , and the Mic wouldn't pick up , I put my board back in everything goes back to normal . So I thought it might be the supplier , so I tried a different supplier , same thing . In total I have tried three different suppliers and I lost count on how many boards I have installed .. Every time I can reinstall the original board and it will stop whatever it's doing wrong . My board Number is SGH_I717_SUB_REV1.0_1107 , DRBL12IN BF , 69 . I am at a lost , I don't know if there's something I'm doing wrong . Thank You for your time ib6469 ( Russ )
Click to expand...
Click to collapse
I just did it last week with no problems on one of our Notes to prepare for sale. Make sure you peel the sticker off the new part to expose adhesive, and be very careful aligning the big connector. Also make sure you get the wire antenna plugged back in all the way. I'd saythe problem is your install but if you can reinstall the original and get back to 1st problem it is weird, obviously at least installing that factory part is going normally.
I used ifixit.com guide to point me in the right direction but it was easy, maybe 15 minutes of work, even being really careful.
I used this part from ebay. With a new battery the old beast is doing great, going on ebay soon.
Good luck!
Thank you
Thank you Delawaredrew,
I saved your supplier , and I will order one from them . THANK YOU FOR YOUR HELP , ib6469.
ib6469 said:
Thank you Delawaredrew,
I saved your supplier , and I will order one from them . THANK YOU FOR YOUR HELP , ib6469.
Click to expand...
Click to collapse
You're welcome!
I read a bunch of reviews of various charging boards when I bought one and many people mentioned peeling the sticker off as a must for proper reception. The wire antenna was a little tricky to reattach, it felt like it was on but looked a little askew; a slight bit more force definitely clicked it in farther. I actually haven't had a SIM in it to verify cell reception but wifi is fine.
Let us know how it goes.
Charge Board Solved
[ To Everyone ,
Thank you for all your help , I finally got it . These boards are different , MATCH THE NUMBERS . My was a DRBL12IN , I tried one and it didn't fix the problem , but I think it was a bad board . I bought one from kingtime2009 on Ebay , It's fixed .All is good . Be sure you match your boards numbers before you order , and you may get a bad board but you can fix it . I've worked on my phone for a month and finally got it fixed . I plan on ordering another board in from the same supplier , just to have if I need it . Once again THANK YOU EVERYONE . If you need any help with your phone please let me know .
ib6469
Russ DeWitt of Microdyne Electronics .
Same problem
ib6469 said:
[ To Everyone ,
Thank you for all your help , I finally got it . These boards are different , MATCH THE NUMBERS . My was a DRBL12IN , I tried one and it didn't fix the problem , but I think it was a bad board . I bought one from kingtime2009 on Ebay , It's fixed .All is good . Be sure you match your boards numbers before you order , and you may get a bad board but you can fix it . I've worked on my phone for a month and finally got it fixed . I plan on ordering another board in from the same supplier , just to have if I need it . Once again THANK YOU EVERYONE . If you need any help with your phone please let me know .
ib6469
Russ DeWitt of Microdyne Electronics .[/QUOT
I was about to buy a new phone. Now I know the problem is related to the power connector repair. Problem is I throw away my broken power connector and did not record the part number.
Click to expand...
Click to collapse
Rr1 said:
ib6469 said:
[ To Everyone ,
Thank you for all your help , I finally got it . These boards are different , MATCH THE NUMBERS . My was a DRBL12IN , I tried one and it didn't fix the problem , but I think it was a bad board . I bought one from kingtime2009 on Ebay , It's fixed .All is good . Be sure you match your boards numbers before you order , and you may get a bad board but you can fix it . I've worked on my phone for a month and finally got it fixed . I plan on ordering another board in from the same supplier , just to have if I need it . Once again THANK YOU EVERYONE . If you need any help with your phone please let me know .
ib6469
Russ DeWitt of Microdyne Electronics .[/QUOT
I was about to buy a new phone. Now I know the problem is related to the power connector repair. Problem is I throw away my broken power connector and did not record the part number.
Click to expand...
Click to collapse
You are correct, there are different revisions on some Samsung charge flex replacements however, usually only 2. Your quickest way to tell, other than the actual revision print on the flex, would be that the interconnect doesn't seem to properly fit or appear as a "loose fit" (or vice versa). As for the adhesive on the bottom, hogwash on affecting the signal. You can have it or not, no difference. It is simply what it is...adhesive. Any signal problems would be caused by the antenna connector not properly seated. Your only other possible causes, if your board revision is correct, would be in your actual handling of the flex during installation. Glad to see people troubleshooting as a group. Feel free to pm me if you have further issues and I will happily try to guide you back to working.
Cheers
Click to expand...
Click to collapse

Categories

Resources