Related
Please help- I soft bricked, and have read up on the process to fix, that I need to fix via ODIN. I installed ODIN, Kies, Samsung USB drivers (from an XDA thread link that says they are 'KNOWN' to work), have uninstalled, reinstalled, etc. and the problem I'm having is that my computer will not recognize the phone when it's in download mode no matter what I do.
SO frustrating- any advice?? Much appreciated
Try unplugging the usb and plugging back in
Sent from my vib
What operating system are you running? I had to use an xp system myself, win7 would never recognize my phone in dl mode
Sent from my SGH-T959 + bionix 1.3 (= sexiness) using XDA App
fit333 said:
Try unplugging the usb and plugging back in
Sent from my vib
Click to expand...
Click to collapse
That worked for me. Along with starting with a fresh boot of ODIN after every flash.
so i tried to flash the new jb 4.1.2 today via mobile odin pro from stock ics ...i copied the extracted firmware file to my external sd card and mobile odin picked it so i proceeded to flash firmware...it then goes to the screen with the green android and spinning gear but it gets stuck at about quarter of the way and now it wont go any further...been stuck for about 30mins so i pulled the battery and tried rebooting normally but now the only thing i can do is boot into download mode it wont enter recovery at all...
also pc odin wont detect my phone now when i go to download mode....
i neeeed some help...got to get the phone up again as its my only fone now
Its a uk o2 unlocked gti9100
Are you install kies on your PC?
Sent from my GT-I9100 using xda app-developers app
Install drivers for phone on pc, start odin, connect mobile.
checked drivers on pc?
tried flashing on another pc?
wishmas7er said:
checked drivers on pc?
tried flashing on another pc?
Click to expand...
Click to collapse
Tried on multiple pcs and installed keis on all but odin just wont detect the phone when in download mode...i,m using a blackberry usb cable as well which worked before when i upgraded to ics a mnth ago..gonna give it another try shortly but is there anything else u guys can think of to allow it to connect or point me to the latest drivers for it
kooliebwoy said:
so i tried to flash the new jb 4.1.2 today via mobile odin pro from stock ics ...i copied the extracted firmware file to my external sd card and mobile odin picked it so i proceeded to flash firmware...it then goes to the screen with the green android and spinning gear but it gets stuck at about quarter of the way and now it wont go any further...been stuck for about 30mins so i pulled the battery and tried rebooting normally but now the only thing i can do is boot into download mode it wont enter recovery at all...
also pc odin wont detect my phone now when i go to download mode....
i neeeed some help...got to get the phone up again as its my only fone now
Its a uk o2 unlocked gti9100
Click to expand...
Click to collapse
Was ur stock ICS rooted before using 'Mobile Odin'
Before using Odin kill/close all kies services and stuff.
Sent from my GT-I9100 using xda premium
Sun90 said:
Was ur stock ICS rooted before using 'Mobile Odin'
Click to expand...
Click to collapse
Yes it was...
Dunno if i have the latest drivers but my version now is 1.5.16.0
kooliebwoy said:
Yes it was...
Dunno if i have the latest drivers but my version now is 1.5.16.0
Click to expand...
Click to collapse
1) try with Diff version of ODIN ( 1.85 or 3.04)
2) on a diff windows ( Xp or win7)
3)if on win7 then try running 'Odin' with 'Administrative rights' and see.
4)check with windows Task manager and see if any Kies process are running, if so kill them all and then try.
rgabi88 said:
Before using Odin kill/close all kies services and stuff.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ive tried killing all keis processes but it still wont detect it..even used a fresh win 7 pc and just installed drivers only but still no luck
Sun90 said:
1) try with Diff version of ODIN ( 1.85 or 3.04)
2) on a diff windows ( Xp or win7)
3)if on win7 then try running 'Odin' with 'Administrative rights' and see.
4)check with windows Task manager and see if any Kies process are running, if so kill them all and then try.
Click to expand...
Click to collapse
I just tried 3 versions of odin (1.85/3.04/3.07)
Still a no go
still need help...phone just wont get recognised by my pc...
Have you thought about how to borrow s2 if you have the chance. Then it attempts to connect to Kies and see what happens. Kies should install drivers or just recognize it. After that need you to disconnect the mobile phone from the PC. Shut Kies. Put your phone into download mode. Turn Odin on PC. Connect the mobile phone with PC and seen whether it recognized. After that, put your phone into download mode and connect it to Odin.
Sent from my GT-I9100 using xda app-developers app
Marin0803 said:
Have you thought about how to borrow s2 if you have the chance. Then it attempts to connect to Kies and see what happens. Kies should install drivers or just recognize it. After that need you to disconnect the mobile phone from the PC. Shut Kies. Put your phone into download mode. Turn Odin on PC. Connect the mobile phone with PC and seen whether it recognized. After that, put your phone into download mode and connect it to Odin.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Will give that a try...thanks
And? At what stage are you? Working or not?
Sent from my GT-I9100 using xda app-developers app
Marin0803 said:
And? At what stage are you? Working or not?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thanks all for the help all..i've solved my problems....
turns out the usb/charging port was bad...seeing that i was able to get into download mode and no pc would detect it..i found a local guy selling parts and took it...as soon as i put it back together and connected it...bam! pc odin picked it up..so i flashed the official jb and now am back in business...:victory:
After tinkering with it for a while, I got it to recognize it, and I flashed it. Problem solved right? well no. Odin gave its "pass!" notification, but it only took 3 seconds, and my device was stuck on the same bootloop that drove me to flash it in the first place. Now, no matter what I do, My computer will not recognize it. I obviously have drivers or it wouldnt of worked the first time. same cord, same computer, same version of odin and everything. I have no problem getting the device into download mode, and I have odin open, cord plugged into computer while I put it in download mode, then I plug in device. also run odin as ADMINISTRATOR. Factory reset also Did not fix my bootloop. no sd card inserted. device is US samsung galaxy player 3.6. computer is running Windows vista 64bit
joshkidner said:
After tinkering with it for a while, I got it to recognize it, and I flashed it. Problem solved right? well no. Odin gave its "pass!" notification, but it only took 3 seconds, and my device was stuck on the same bootloop that drove me to flash it in the first place. Now, no matter what I do, My computer will not recognize it. I obviously have drivers or it wouldnt of worked the first time. same cord, same computer, same version of odin and everything. I have no problem getting the device into download mode, and I have odin open, cord plugged into computer while I put it in download mode, then I plug in device. also run odin as ADMINISTRATOR. Factory reset also Did not fix my bootloop. no sd card inserted. device is US samsung galaxy player 3.6. computer is running Windows vista 64bit
Click to expand...
Click to collapse
boot into recovery and wipe data and cache
iurnait said:
boot into recovery and wipe data and cache
Click to expand...
Click to collapse
Ive done that countless times and it makes absolutly no difference. do you think maybe i messed it up when i flashed it the first time (to where the computer wont recognize it?) i used the normalboot img to flash it with odin. when I got it to work the first time, the very second I plugged it in it started downloading drivers. also yesterday I reinstalled kies and all of the drivers.
I installed kies and plugged the device in, then kies installed drivers and it worked.
Sent from my GT-I8190N using xda app-developers app
HI
joshkidner said:
After tinkering with it for a while, I got it to recognize it, and I flashed it. Problem solved right? well no. Odin gave its "pass!" notification, but it only took 3 seconds, and my device was stuck on the same bootloop that drove me to flash it in the first place. Now, no matter what I do, My computer will not recognize it. I obviously have drivers or it wouldnt of worked the first time. same cord, same computer, same version of odin and everything. I have no problem getting the device into download mode, and I have odin open, cord plugged into computer while I put it in download mode, then I plug in device. also run odin as ADMINISTRATOR. Factory reset also Did not fix my bootloop. no sd card inserted. device is US samsung galaxy player 3.6. computer is running Windows vista 64bit
Click to expand...
Click to collapse
Hi,I think you can change a computer and try it again.Sure that won't be a problem.
Messypot said:
Hi,I think you can change a computer and try it again.Sure that won't be a problem.
Click to expand...
Click to collapse
Like I have said, I have gotten it to work on this computer. I did try it on my dads computer (windows 7 ultimate, not sure if 32 or 64) and no luck. I have reinstalled kies twice now. order I do things? open odin (as administrator) with cord plugged into computer ONLY. then put device into download mode and plug it in. thank you all for helping, but it is starting to seem i will never get this thing fixed! someone give me a miracle?
Dont know about 3.6 but with 5.0 you can only flash Zimage ..not boot.img
Sent from my Nexus 7 using xda app-developers app
DZonikg said:
Dont know about 3.6 but with 5.0 you can only flash Zimage ..not boot.img
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
one other side note, I can tell it is drawing power from the computer. (when i take the battery out it stays on until I unplug it)
and the file is normalboot.tar.md5 (not img) Im not positive what you are talking about. thanks for helping! any info at all could be something I am overlooking
joshkidner said:
Like I have said, I have gotten it to work on this computer. I did try it on my dads computer (windows 7 ultimate, not sure if 32 or 64) and no luck. I have reinstalled kies twice now. order I do things? open odin (as administrator) with cord plugged into computer ONLY. then put device into download mode and plug it in. thank you all for helping, but it is starting to seem i will never get this thing fixed! someone give me a miracle?
Click to expand...
Click to collapse
I can give you some advice.
1.Can your device reboot to CWM? If so,you can wipe data.
2.Sure you have the USB Debugging turn on.
3.Sure that Your USB Data Line is intact and it is suitable for you device.
4.I think you'd better change a USB Date Line.......
Once you get the computer to recognize the device, flash factoryfs from odin
Sent from my SGH-I777 using xda app-developers app
I already reset it multiple times (power and volume up > reset or whatever it is) cannot boot it (which is why I am flashing it) so I cannot put it in usb debugging mode. the cord is brand new and I have used it to flash the same device the first time. after the first flash it will not connect. I will still try other cords (that I will prob. have to borrow, I only have one) I already have the facrotyfs image, so thanks for reassuring krzee, because I wasnt sure.
Yeah I have the factory fs, now If i can get my computer to recognize the device! Will try other computers/cords whenever I can. again, It is not rooted, so no CWM. I can put it in normal recovery and wipe the data, which as I have said, I have already done 10ish times or so.
joshkidner said:
I already reset it multiple times (power and volume up > reset or whatever it is) cannot boot it (which is why I am flashing it) so I cannot put it in usb debugging mode. the cord is brand new and I have used it to flash the same device the first time. after the first flash it will not connect. I will still try other cords (that I will prob. have to borrow, I only have one) I already have the facrotyfs image, so thanks for reassuring krzee, because I wasnt sure.
Click to expand...
Click to collapse
Did you try with kies?
Sent from my GT-I8190N using xda app-developers app
maybe I would try it with kies if my computer recognized the thing!
it doesnt have to, just install kies and plug in the device... for me, kies installed drivers while device was bricked, and after that i booted into download mode, and odin recognised it...
Sent from my GT-I8190N using xda app-developers app
QuanticZero97 said:
it doesnt have to, just install kies and plug in the device... for me, kies installed drivers while device was bricked, and after that i booted into download mode, and odin recognised it...
Sent from my GT-I8190N using xda app-developers app
Click to expand...
Click to collapse
It should already have the kies drivers, being i have used the device with kies before it did all this. when I turn it on (just by the power button) then plug it in (BOOTLOOP) it tries to install drivers from the device processor (it comes up with some weird name, googled it and it was the name of the processor) but fails when the device shuts off and turns back on. when it is off and I plug it in, a loading circle comes up but never spins. ive let it sit at the circle for hours. the computer never picks it up and it never does anything.
another thing. when in recovery, what is the "install update from sdcard" option? can I actually load the same file as I would use in odin onto the card and try it that way? I am talking to samsung support right now. they say the problem is internal and it needs to be serviced. it has the custom rom on it can they pick that up? it is not rooted, it is stock but it comes up as custom in download mode
joshkidner said:
another thing. when in recovery, what is the "install update from sdcard" option? can I actually load the same file as I would use in odin onto the card and try it that way? I am talking to samsung support right now. they say the problem is internal and it needs to be serviced. it has the custom rom on it can they pick that up? it is not rooted, it is stock but it comes up as custom in download mode
Click to expand...
Click to collapse
if you have cwm, you can put rom(that is in zip format) to sd card and install it via cwm...
Sent from my GT-I8190N using xda app-developers app
this may sound like a noob question, but does having this "install from sdcard" mean I have CWM?
joshkidner said:
this may sound like a noob question, but does having this "install from sdcard" mean I have CWM?
Click to expand...
Click to collapse
it might, im not sure does stock recovery have that option too, but you should put rom on sd and try to install it via that option to see if it works..
Sent from my GT-I8190N using xda app-developers app
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
parasharenator said:
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
Click to expand...
Click to collapse
Dont worry....this time go to download mode and flash eugenes that does not brick aka Eugene_2E_JK2_Froyo with the same pit file and ur good to go brother
Similar Problem but different results.
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
david.carlton.jr38 said:
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
Click to expand...
Click to collapse
Can you explain the steps your taking when you try to get into odin
Sent from my SGH-T959 using xda app-developers app
The steps I take is put the phone into download mode by pulling the battery and then holding both the volume up and down then reinsert the battery. It shows the download screen. I then start odin and I have tried version 1.7 and the latest version of 3.0.7. Then I plug my phone into the USB port and windows pops up saying unrecognized device. I have reinstalled drivers several times. Now to describe my desktop is that it is a pentium III 550 Mhz...and old computer and running Windows XP Professional. I am able to do the mass storage when the phone is on normally so it recognizes it that way though. I have tried different USB ports on it as well so just unsure. I have rooted the phone and have superuser app access. ROM manager was supposed to have flashed the recovery mode but it never goes into the CWR mode either and its version is 2.5.1.2 which I have seen work on these phones in videos on YouTube so guess I am trying a different route so I can play with the mods to find a ROM I like. I was going to try the Avatar ROM for the vibrant but just cannot seem to get to the point where I can get the ROM flashed. Any help would be greatly appreciated.
Keep the battery in and lull up Odin. Cut off the phone and hold both volumes while inserting USB hopefully the computer will then recognize it
Sent from my GT-I9000 using xda app-developers app
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
Stay away from kies I will Brick your device as for the computer being old I don't know. I've never had this problem before. Sorry o couldn't help
Sent from my GT-I9000 using xda app-developers app
david.carlton.jr38 said:
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
ioancr said:
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
Click to expand...
Click to collapse
Do you have the link to the Heimdall one-click package or do I just google it?
david.carlton.jr38 said:
Do you have the link to the Heimdall one-click package or do I just google it?
Click to expand...
Click to collapse
I found the link:
http://d-h.st/M93
on the Repository thread: http://forum.xda-developers.com/showthread.php?t=1875966
And since only thing remaining in your case is USB cable, I would say try with a different micro USB cable, even a different vendor's will do, as it did the trick for me( see the edit in OP)
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
david.carlton.jr38 said:
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
For now, you can try any micro usb cable that fits, they all have same specifications.
Okay. Thanks!
Sent from my SGH-T959 using xda app-developers app
Stuck on cache
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Mentalmama said:
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Click to expand...
Click to collapse
Great that you could get it to the download mode.
Follow these steps:
1. Make sure that you have the correct drivers installed for your Operating System. Preferably, download the latest drivers. You can verify when your device is recognized when connected in download mode.
2. Make sure you follow this thread for Odin flashing http://forum.xda-developers.com/showthread.php?t=849028
3. If unable to flash using ODIN successfully, try with different USB ports, on same computer or a different one, say, a laptop.
4. If still unable to do so, try with different USB cables (any micro-usb should do).
In this way, you should by trying multiple alternatives at each step you should be able to eliminate the options and figure out what is really creating the problem in your flashing. Trust me my friend, this has not go anything to do with technology. just follow the steps, try alternatives and you would resolve this. Do post back on thread, if you have any queries.
Well was trying mobile odin on my p7500
were trying P7500XWLPD_P7500DBTLP3_P7500XXLQ8_HOME.tar
pressed start and its just keeps rebooting mobile odin shows 0.3 sec a cache.ing done thing and the download mode now not recognizes USB (Tried 3-4USB) so it is not in the USB , or USB driver
Yeah I tried go to recovery mode but it shows the mobile odin 0.3 thing and reboots again
What should I do?
Any help ? Anyway to do this without otg or gtag . Noone experienced this kind of problem ?
It is not the mobile odin that made usb useless thats the cm 10.1 .
Sent from my GT-I9100 using xda app-developers app
enkhtwshn said:
Well was trying mobile odin on my p7500
were trying P7500XWLPD_P7500DBTLP3_P7500XXLQ8_HOME.tar
pressed start and its just keeps rebooting mobile odin shows 0.3 sec a cache.ing done thing and the download mode now not recognizes USB (Tried 3-4USB) so it is not in the USB , or USB driver
Yeah I tried go to recovery mode but it shows the mobile odin 0.3 thing and reboots again
What should I do?
Click to expand...
Click to collapse
My head hurts from trying to understand the above.
Let me see if I can make some sense of it:
You installed Mobile ODIN on your P7500, downloaded the ICS ROM, and tried to install it.
Apparently Mobile ODIN failed and immediately rebooted.
Now the tablet displays something about cache.img during restarts. That means that it's not totally dead, though.
You need to boot it into download mode and use PC ODIN to flash your ROM.
However, while you can get into download mode, your computer doesn't recognize the tablet.
You've tried several USB ports with no change.
You can't boot into recovery since that just gets you Mobile ODIN.
If you boot it into download mode and your PC doesn't recognize the tablet - especially if it doesn't see anything in device manager when you connect it, your cable is bad. Replace it. Then use PC ODIN to flash your ROM.
k1mu said:
My head hurts from trying to understand the above.
Let me see if I can make some sense of it:
You installed Mobile ODIN on your P7500, downloaded the ICS ROM, and tried to install it.
Apparently Mobile ODIN failed and immediately rebooted.
Now the tablet displays something about cache.img during restarts. That means that it's not totally dead, though.
You need to boot it into download mode and use PC ODIN to flash your ROM.
However, while you can get into download mode, your computer doesn't recognize the tablet.
You've tried several USB ports with no change.
You can't boot into recovery since that just gets you Mobile ODIN.
If you boot it into download mode and your PC doesn't recognize the tablet - especially if it doesn't see anything in device manager when you connect it, your cable is bad. Replace it. Then use PC ODIN to flash your ROM.
Click to expand...
Click to collapse
Well I replaced several cables no use . When I plug it in it shows me unknown device . And it doesn't recognise it.
Sent from my GT-I9100 using xda app-developers app
enkhtwshn said:
Well I replaced several cables no use . When I plug it in it shows me unknown device . And it doesn't recognise it.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
you need to have the samsung usb drivers installed
download Samsung Kies and install it, it will also install the drivers