How do you get into the model info of the X10 now with 2.1? The menu back thing doesn't work anymore.
hramos20 said:
How do you get into the model info of the X10 now with 2.1? The menu back thing doesn't work anymore.
Click to expand...
Click to collapse
You beat me to the post! I just upgraded to 2.1 and the "menu back" sequence does not work.
Anyone have any ideas?
Same sequence but use the home key in place of the menu key.
Candy[MAN] said:
Same sequence but use the home key in place of the menu key.
Click to expand...
Click to collapse
That did the trick!! Thanks
[App] Service Menu Application
http://forum.xda-developers.com/showthread.php?t=840466
No need to remember the key sequence anymore
xeviro said:
[App] Service Menu Application
http://forum.xda-developers.com/showthread.php?t=840466
No need to remember the key sequence anymore
Click to expand...
Click to collapse
Thanks!! This is even better!
Related
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Thank you for the advice.
Thanks for help
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
fantomel said:
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Click to expand...
Click to collapse
elder T said:
Thank you for the advice.
Click to expand...
Click to collapse
bassam777 said:
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
Click to expand...
Click to collapse
DeeJay05 said:
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
Click to expand...
Click to collapse
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
drupad2drupad said:
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
Click to expand...
Click to collapse
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
olyloh6696 said:
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
Click to expand...
Click to collapse
yea it erase the nand flash like a format and the the drive is real clean and only toshiba logo is displayed
shahryarkh said:
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
Click to expand...
Click to collapse
read this:
tg01 two brick variants how to unbrick
and do this:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED flash RED *
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
* if red led not flash- use TG Downloader unbrick method with user manual in german (pls translate with google translator for other languanges)
contains: TG01 Downloader TG01 Driver TGTool
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
Click to expand...
Click to collapse
If a soft reset doesn't work then hard reset, hopefully you installed from a fresh rom flash/hard reset anyway?
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
Click to expand...
Click to collapse
tf3d never causes me any of these problems, what ROM were you on?
Thank you
... this saved my Day.
I wasn't able to do a Master Reset after Flashing.
OK, so after trying out the last android build from Markinus, winmo is now saving text messages to the SIM.
If I do a 'hard' reset, what will I lose on my phone? (contacts/texts/email setup etc??). Please explain the downside of hard reseting. Thanks! (or basically.. will I need to save/backup anything before hard resetting?)
Also: Will it remove the 'unlock' that I have applied to my phone?
Update: Well I did it anyway. Saved my contacts, but that's about it lol. Hopefully this will get my messages to saving back into memory rather than onto the sim.
My S3 galaxy not block the screen.
Anyone know how to reverse?
Tks
--------
Be defective or firmware
Fail to understand op. Block ???
jje
Sent from my GT-I9300 using xda premium
Is the option chacked in the settings?
I click the power button to lock but it does not block.
Just goes black.
I do not know if it will be problem of firmware or corrupt file.
Already installed a rom original and still the same.
lluisnovo said:
I click the power button to lock but it does not block.
Just goes black.
I do not know if it will be problem of firmware or corrupt file.
Already installed a rom original and still the same.
Click to expand...
Click to collapse
When I click the button extended power it shuts down instead of up the menu restart / off
Soo confused mate.. Do you mean the expanded power menu dosent show up?
Extended power dosent mean "More Power" it gives you more optios. I.E - Restart Phone
My name is Optimus Prime and I send this message..
Hey,
Just received my phone from repair center. For no reason they decided to make my phone branded, changed to Three!! Cheeky!! Am furious!!
Now I want to role back to my original firmware but don't know the original baseband version, product code. Only IMEI and UPC of original box.
Have been trying to find a solution but haven't found anything.
Any ideas?
Thanks in advance
Go to Sammobile and use the Firmware checker. Select your country and your phone and you'll find the latest software. Flash that.
Thanks, but I need to know the original version. There's no country in the list and bought this phone on ebay
beliz85 said:
Thanks, but I need to know the original version. There's no country in the list and bought this phone on ebay
Click to expand...
Click to collapse
Ah, I don't think there's any way to find that out once your firmware has been changed!
DeadSOL said:
Ah, I don't think there's any way to find that out once your firmware has been changed!
Click to expand...
Click to collapse
There should be some way
What was your original firmware .
Then find the modem in the modem thread .
If you don't know the original then nobody else bar the seller will know .
You can use CHECKFUS to download any current firmware and flash via Odin .
jje
from seller:
GT-I9300MBDBTU
Flashed, but phone doesn't turn on. Stuck on "samsung"
beliz85 said:
from seller:
GT-I9300MBDBTU
Flashed, but phone doesn't turn on. Stuck on "samsung"
Click to expand...
Click to collapse
Turn phone off. Enter Recovery (hold Volume Up + Home Button + Power Key until the Android is shown). Wipe cache. Reboot.
DeadSOL said:
Turn phone off. Enter Recovery (hold Volume Up + Home Button + Power Key until the Android is shown). Wipe cache. Reboot.
Click to expand...
Click to collapse
Thank you. It worked!
beliz85 said:
Thank you. It worked!
Click to expand...
Click to collapse
Good to know! :highfive:
It seems, this is version 4.0.4, Also it's not upgradable!!! what the heck? My previous one was upgradable to 4.1.1.
Sir, please help me with my problem. Have anyone experienced after flashing a rom then the home button long press isn't working? another one is when you are in an app then if you press home button it jist don't get you back to home screen? please help me with this. thank you!
ybrek said:
Sir, please help me with my problem. Have anyone experienced after flashing a rom then the home button long press isn't working? another one is when you are in an app then if you press home button it jist don't get you back to home screen? please help me with this. thank you!
Click to expand...
Click to collapse
Must be the rom with the broken home button...
Which rom are you on? When does this problem occur? Some more info could be helpfull if you want people to help you with your specific problem
Sent from the Matrix
Donnie Sins said:
Must be the rom with the broken home button...
Which rom are you on? When does this problem occur? Some more info could be helpfull if you want people to help you with your specific problem
Sent from the Matrix
Click to expand...
Click to collapse
i'm sorry sir. The rom I used was WanamLite 12.8. After upgrading from 12.7 to 12.8 this problem just appeared. It was just after flashing sir. And another thing ive noticed is that when you long press power button, only shutdown and reboot are present and no flight mode and data connection etc is shown.
ybrek said:
i'm sorry sir. The rom I used was WanamLite 12.8. After upgrading from 12.7 to 12.8 this problem just appeared. It was just after flashing sir. And another thing ive noticed is that when you long press power button, only shutdown and reboot are present and no flight mode and data connection etc is shown.
Click to expand...
Click to collapse
Actually I've never had this problems... I did try both WanamLite versions, but I always do a full wipe so I never face any troubles. Maybe try that after a Nandroid backup?
Sent from the Matrix
guys i need your help! :laugh:
I've succesfully deodexed my framework using this http://forum.xda-developers.com/showpost.php?p=13254199&postcount=3
then i pulled the deo framework to my phone and everything was ok. but when i wanted to use "skip track using volume keys mod"
the power off menu only boots my phone, not turns off it.
any idea of what's happening? because i wanna use that mod, but also want to turn off my phone. thanks in advance
PD: i've deodexed my stock rom ICS .587, my phone is a LWW.
23 views and anyone can help me?
well i didnt understand what u meant by this
the power off menu only boots my phone, not turns off it.
Click to expand...
Click to collapse
sandy7 said:
well i didnt understand what u meant by this
Click to expand...
Click to collapse
when I press the button to turn off my device, is supposed that it shows a menu with all the option (silent mode, turn off , etc). If i touch the turn off option, the phone reboots not turn it off.
Dominator_666 said:
when I press the button to turn off my device, is supposed that it shows a menu with all the option (silent mode, turn off , etc). If i touch the turn off option, the phone reboots not turn it off.
Click to expand...
Click to collapse
ho thats bcz of u installed a skip track...
well the reason is the reboot option hex codes is patched both in framework-res.apk and android.policy.jar
when u flashed skip track mod it replaced ur android.policy.jar so the hex code of power off in framework-res.apk is mismatched with reboot in andorid.policy.jar
so thats the detailed info , hope u understood.
sandy7 said:
ho thats bcz of u installed a skip track...
well the reason is the reboot option hex codes is patched both in framework-res.apk and android.policy.jar
when u flashed skip track mod it replaced ur android.policy.jar so the hex code of power off in framework-res.apk is mismatched with reboot in andorid.policy.jar
so thats the detailed info , hope u understood.
Click to expand...
Click to collapse
mmmmm that's why it doens't work. is there a solution to make work both skip tracks and power off?
Dominator_666 said:
mmmmm that's why it doens't work. is there a solution to make work both skip tracks and power off?
Click to expand...
Click to collapse
upload ur android.policy.jar from ur deodexed rom ...ill patch it for u
Here is my android.policy. hope that it works
Dominator_666 said:
Here is my android.policy. hope that it works
Click to expand...
Click to collapse
here u go bro...test if it works properly
sandy7 said:
here u go bro...test if it works properly
Click to expand...
Click to collapse
Wooooooow man! it's working awesome!!! really thank you 4 helping me
:highfive: