Guys,
To enable chinese writing in your device
1. Get a chinese font and put it in /windows folder
2. Create a link in registry to link the font so that system can use them
I have attached the chinese font i used with the reg file in the Chinesefont.rar
**Note that you CAN use any other chinese font, you just have to edit the .reg to link the font to your system eg. sunglobe
**New added sunfon cab simply install it to read chinese!!
***New updated cab (Now support chinese in IE and MSN!!)
http://www.mediafire.com/?6t1vc0mnfzz
To enable chinese writing
i had tried many SIP and not many is working for WM6. For wm5 thats no issues except conflicts with other SIP especially PhonePad.
For WM5
I recommended you to use PlumSIP 5.0.2 as it has T9 Pinyin and T9 Eng+T9 Dictionary!! So even if PhonePad conflict and cant be used, you can still use it for T9 Eng
**Notes it lacked the auto space after selecting a word for T9 Eng.
For WM6 AKU0.3
I cant get anyother chinese SIP to install except PlumSIP5 PPC10 Beta 0615.CAB. So no choice, although theres conflict with phonepad(not included in this release). At least you can type chinese and english on this keyboard
**Notes it not T9 Pinyin nor T9 Chinese, just keyboard for both.
For WM6 AKU0.7 beta
I managed to get ZTA4_PPC2005_QVGA_SIP_v2.0.14.CAB and PhonePad (builtin the ROM) working!! Thank to Jiggs to solve the PhonePad issue!!
**Notes need to switch to ZTA4 for T9 Chinese and PhonePad for T9 Eng. Although sounded troublesome, but its working great with no conflicts switching between both of them
For WM6 AKU0.7
I preferred to use PlumSIP6 as it had better T9 Eng and T9 Pinyin + large keyboard with PCMkeyboard's indicator of pressed key!! However it has conflict with builtin phonepad, either one of them or both will fails to load. To solve this issue.
1. Use sktool =>> Maintenance =>> Services =>> disable the "IntelliPadService", set it to "manual" too.
2. Use sktool =>> Maintenance =>> Window startup =>> click and hold on "PlumStart6.exe" =>> goto "order" =>> select "up" (repeat till its the highest)
***Notes please install only 1 chinese SIP.
BTW...thanks for this info. I'm a non-native Chinese speaker in China and just bought the Atom. This is great stuff. Now... any input methods for WWE that let you write (by hand) Chinese character? My writing is poor, but it would help me use my dictionary better.
Dear folks,
May I ask how to add the registry into the phone?
Totally clueless... thanks in advance!
Also, thanks for the sharing!
isn't it copy sunfon.ac3 to window , then open the frontlink_sunfon.ac3.reg ?
i try it , but cannot work ~ pls gv me some idea ~ thanks ~ !
@qoqosau
u will need an registry editor like resco registry and double click on the .reg i provided will do
@choon28686
Did u import the frontlink_sunfon.ac3.reg or just opening it? Did u reset your device after that?
Dear ckaidi,
Truly thanks for the advice.
After several testings, I do believe resco registry confronts with my rom
Hwr it works out finally...
ckaidi said:
@qoqosau
u will need an registry editor like resco registry and double click on the .reg i provided will do
@choon28686
Did u import the frontlink_sunfon.ac3.reg or just opening it? Did u reset your device after that?
Click to expand...
Click to collapse
SKTools registry explorer imports this without a problem. If you have trouble with Resco, download the trial SKTools and work from there.
so good ~! my atom with WM6 can read and write chinese already ~! really thx ckaidi and Ultimate Chicken for the guide ~! thank you 2 so much ~!
Import reg file
we can use Task Manager to import reg file by press left icon bar as picture
tube216 said:
we can use Task Manager to import reg file by press left icon bar as picture
Click to expand...
Click to collapse
This is one of those "i din know i can do that" haha
Great information shared~! Thank!!
Chinese Tradition Atom WM6 Final by the person who came out WM6 Chinese previously.
ATOM: http://rom.iio2.com/atom/wm6atom0925.rar
ATOM EXEC: http://rom.iio2.com/exec/wm6exec0925.rar
screenshot here
http://forum.xda-developers.com/showpost.php?p=1550337&postcount=225
Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you
ckaidi said:
Guys,
To enable chinese writing in your device
1. Get a chinese font and put it in /windows folder
2. Create a link in registry to link the font so that system can use them
I have attached the chinese font i used with the reg file in the Chinesefont.rar
**Note that you CAN use any other chinese font, you just have to edit the .reg to link the font to your system eg. sunglobe
http://www.mediafire.com/?8xgrmyy3mdw
To enable chinese writing
i had tried many SIP and not many is working for WM6. For wm5 thats no issues except conflicts with other SIP especially PhonePad.
For WM5
I recommended you to use PlumSIP 5.0.2 as it has T9 Pinyin and T9 Eng+T9 Dictionary!! So even if PhonePad conflict and cant be used, you can still use it for T9 Eng
**Notes it lacked the auto space after selecting a word for T9 Eng.
For WM6 AKU0.3
I cant get anyother chinese SIP to install except PlumSIP5 PPC10 Beta 0615.CAB. So no choice, although theres conflict with phonepad(not included in this release). At least you can type chinese and english on this keyboard
**Notes it not T9 Pinyin nor T9 Chinese, just keyboard for both.
For WM6 AKU0.7 Beta Tester
I managed to get ZTA4_PPC2005_QVGA_SIP_v2.0.14.CAB and PhonePad (builtin the ROM) working!! Thank to Jiggs to solve the PhonePad issue!!
**Notes need to switch to ZTA4 for T9 Chinese and PhonePad for T9 Eng. Although sounded troublesome, but its working great with no conflicts switching between both of them
Click to expand...
Click to collapse
Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you
chingvans said:
Can you tell me the procedure of the chinese reading, i had follow the step by step, but it doesn't anymore , pls help ...Thank you
Click to expand...
Click to collapse
i create a cab for u....try and see if it work anot?
check the 1st post
ckaidi said:
This is one of those "i din know i can do that" haha
Great information shared~! Thank!!
Click to expand...
Click to collapse
it still doesn't work, i used the the other program from another post, but it seem the program isn't not allow to write any text message, it just only the white screen and i couldn't write anythings in there
chingvans said:
it still doesn't work, i used the the other program from another post, but it seem the program isn't not allow to write any text message, it just only the white screen and i couldn't write anythings in there
Click to expand...
Click to collapse
hmm...are you using atom?which ROM?wat SIP did u install?
ckaidi said:
hmm...are you using atom?which ROM?wat SIP did u install?
Click to expand...
Click to collapse
I'm using O2 Atom Exec with WM6 AKU 0.3.0
chingvans said:
I'm using O2 Atom Exec with WM6 AKU 0.3.0
Click to expand...
Click to collapse
Just to be more clear before i can help.
1. Wat is the main problem you had? Read or Write?
2. If you can read Chinese now, which SIP did you install?
3. Did the SIP installed properly? Or successfully?
4. Wat you mean by blank? While trying to activate the input panel?
5. Wat other SIP and Today item did you install?
6. Interested to install the aku0.7 cos since phonepad is fixed it might fix your issue too.
ckaidi said:
Just to be more clear before i can help.
1. Wat is the main problem you had? Read or Write?
2. If you can read Chinese now, which SIP did you install?
3. Did the SIP installed properly? Or successfully?
4. Wat you mean by blank? While trying to activate the input panel?
5. Wat other SIP and Today item did you install?
6. Interested to install the aku0.7 cos since phonepad is fixed it might fix your issue too.
Click to expand...
Click to collapse
Thank you for your help , i already solve out the chinese reading problem , but it got one more left problem......the input layout problem , i want to use handwriting to write out the chinese letter
Hi, I have an Orange UK HTC Touch Dual with 16 keypad.
I want to flash with the NetrunnerAT Portuguese Rom:
RUU_Nike_HTC_PTG_1.31.410.09_Radio_Nike_1.58.16.27_signed_Ship
There's any problem because almost all nikes are 20 keypad?
Please help me before I begin flashing rom and installing hard spl...
anyone can help me please? I dont know if there's any difference because the keypad...
The only thing I know is that normally it doesn't matter which version keypad you have.
But there is an issue with this portuguese rom that XT9 for Portuguese isn't working with the hardware keypad. There is a work around but that one is only working for the 20 keys version.
wmn79 said:
The only thing I know is that normally it doesn't matter which version keypad you have.
But there is an issue with this portuguese rom that XT9 for Portuguese isn't working with the hardware keypad. There is a work around but that one is only working for the 20 keys version.
Click to expand...
Click to collapse
So, there's not a Portuguese Rom that XT9 Portuguese is working?
I instaled the PTG Tom_Codon's rom in my 16 keys niki and the XT9 isnt working.
It only writes numbers, no letters at all.
Im still trying to find the PTG XT9 for the niki, if anyone have found it, just let me know.
Im having the same problem with my Neon. I installed Seths Diamond v2 and i cant text. Every key goes straight to number. No xt9. I'm using a English ROM tho. Maybe some extra files we need downloading?
Before i have same problem with chinese rom, can't input text...
Problem was solved by extracting xt9 dll's and reg's from another rom.
Tim4 said:
Before i have same problem with chinese rom, can't input text...
Problem was solved by extracting xt9 dll's and reg's from another rom.
Click to expand...
Click to collapse
You wouldnt mind explaining to me would you?! This is a thorn in my side lol
1) I have downloaded cab file for Niki (20key version), thats included all required files for xt9. I found it on this site
2) I have extract all files from cab by SkTools, except key mapping files (Because it's 20key version cab, not 16). And have do the same operation for registry.
3) Next step is just move it to \windows folder and accept .reg files
4) After i have installed xt9 pack with russian language (because i'm russian)
and after SR xt9 start working
P.S. Now i use WWE rom without this problem for a long time, so i can't clearly remember what i have to do
Hi,
After going though countless forums looking for Chinese Traditional support and IMEs that works on WM6.5 I have found a solution for those interested.
download and install droid.cab from:
http://www.studiokuma.com/wm/?section=support
This font supports chinese traditional, japanese, korean and english. It was a font taken from android and optimized for PDA/PPC. Take note of the size! Google managed to squeese 4 languages into a size normally one language cab file will take!
Due to this optimization, I read it is also less taxing on the CPU, keeping your device zippy.
For IME I use one found in this xperia x1 thread:
PlumSIP 6.1 CHT
http://forum.xda-developers.com/showthread.php?t=501949&page=6
http://www.megaupload.com/?d=R468MTI4
This IME uses English pinyin/phonetics to find the chinese you are looking for. Good for learners and the chinese prediction is excellent. (I think it is modded to work with CHT??)
I have tested this on my current WWE udk R6 rom for Topaz, I have tested contacts creation/editing, sms, web browsing and for me it is by far the best solution in terms of the time required to learn the IME and the word prediction. The only downside is that PlumSIP itself uses chinese simplified in its menus but should not be too hard to figure out.
Hope this is useful for some!
Lilhorse
So how come we still can't find the OEM CHT and CHS inputs that come w/ the Asia and HK/Taiwan roms?
I am actually trying to create a cab from the oem package IME_CHT_2_0_344910_00 from the "RUU_Topaz_hTC_Asia_TW_1.40.709.1_Radio_Sign_Topaz_61.25t.25.19_3.44.25.27_Ship.exe" rom.
The package was converted to a cab with pkg2cab.exe tool (cabtools 0.3) but seems that it does not work on my udk r6 rom. After reset, my phone just hangs. I'll do some comparisons with some IMEs that do work and see if I can figure out the difference. Perhaps I have to remove the WWE IME before I can install the IME_CHT?
lilhorse said:
I am actually trying to create a cab from the oem package IME_CHT_2_0_344910_00 from the "RUU_Topaz_hTC_Asia_TW_1.40.709.1_Radio_Sign_Topaz_61.25t.25.19_3.44.25.27_Ship.exe" rom.
The package was converted to a cab with pkg2cab.exe tool (cabtools 0.3) but seems that it does not work on my udk r6 rom. After reset, my phone just hangs. I'll do some comparisons with some IMEs that do work and see if I can figure out the difference. Perhaps I have to remove the WWE IME before I can install the IME_CHT?
Click to expand...
Click to collapse
I don't know about the CHT IME, but I guess you changed the font as well.
When I changed font to make japanese characters available, I needed to change wince.nls as well. If I use wince.nls from WWE ROM the phone does not boot.
well, in terms of Chinese input method, i find TouchPal much better than HTC ezInput. i'm quite happy with my current config:
WWE rom + chinese font display + ezInput English + TouchPal
I have taken a look at TouchPal and it looks pretty good but the only thing is that you'd have to pay. I Suppose you can get it on torrents but I'd like to get the htc package working, might try to cook it in the rom. Something to do for this Sunday
heiii im taiwanese too ^^
nice too meet u
btw can help me if some thing i dont [email protected]@
im new in htc.....thanks fof the font ..
simplified chinese version of TouchPal is free and can be downloaded from their official bbs. should be ok for chinese