So, I have to send my HD2 back to t-mobile in seven days so I was removing HSPL. I used the instructions from this thread:
http://forum.xda-developers.com/showthread.php?t=611433
So I took the stock 2.10 ROM I had and renamed it LEOIMG.nbh and put it on a 2gb SD card. So I did that and proceded to turn the phone off holding down the volume down button. It asked if I wanted to do this. I said yes.
Then I got "Software Update Failed". Nothing is happening now. I can't get it to do anything.
I don't understand what I did wrong.
When I bring up the tri-color screen it says that the spl is 2.08.000 and on the bottom says "Update ROM Code Error Pleas Try Again". In the top right corner it says "RUUNBH".
Now no matter what it goes to a gray "Loading..." screen.
I'm freaking the hell out. What do I do?
use a different rom, get one from the t mo website.
samsamuel said:
use a different rom, get one from the t mo website.
Click to expand...
Click to collapse
And put it back on the stick and try it again?
I can't get it to hook up to the computer for active sync or anything if that's what I'm supposed to do.
PB81120 SS-B3
SPL-2.08.000 8G XE
MicroP(LED) 0x05
MicroP(touch) 0x50
Is what it says on the tri-color screen. I'm curious though. Would they know that it had HSPL on it from this information?
flash from the tri coloured screen, you dont need the phone to be booted.
SPL-2.08.000 8G XE
it ends 0000, thats stock, if it ends hspl they can tell, thats all.
Got it. Thanks a bunch!
Related
PLEASE MOVE THIS TO THE TMOBILE HD2 SOMEONE
Hey guys, i'm trying to get a replacement for my HD2 since I believe i've gotten a bad shipment one however i'm running:
R 2.10.50.26
G 15.39.50. 07U
D 2.13 KUMAR C5
[this is what appears under the stick together when it freezes]
I downloaded the 2.13 stock ROM from the website here, opened in winrar, extracted the ruu file, reformatted my microSD to a FAT32, placed the file on it and renamed it to LEOIMG and then helpd down the down vol button and hit the power button, it flashes the rainbow screen thing, flashes loading really quickly then goes back to the rainbow screen and says the following [pic included but taken from a crapberry so sorry it's hard to read]
[apparently I can't post pics? so here's what it looks like I can provide a picture link via PM unless I get verified]
[RED BLOCK]
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x05
[GREEN BLOCK]
[BLUE BLOCK]
[WHITE BLOCK (also says serial)]
Any ideas why I cant flash the stock ROM so I can return this without voiding the warranty guys? It'd be much appreciated.
Also if it matters i'm using the TMobile 1024 HD2. I just got it about 5 weeks ago
trying to use a 16gb sd card? 99 times in 100 they fail. (well, the one that came with the tmous does anyway)
You dont need to use card tho...
assuming you have a tmous phone, (you didnt say, and you're posting in the regular leo section, but im gpnna assume you have a tmous)
1 - run hspl3 - choose 2.08.0000
2 - flash the stock rom 2.13 using usb
done
I'll give it a shot and leave an update, apologies if I posted in the wrong area. The reason i'm trying from an SD card is because for some reason the phone keeps freezing and I pull the battery 10+ times a day and it gets stuck at the stick together screen alot [i'm assuming i'm having some issue with it hardware like a bent pin but since it's getting power i'm not sure???] I figured an SD install would go smoother. My windows Vista doesn't seem to like it too much
dont worry about it not booting, so long as you cam manually get into bootloader, you can run hspl and do usb flashes from there. The phone doesnt need to be booted.
As for teh pins, they should all stick out at teh same angle (i.e straight out, all teh same)
OK update:
I tried formatting my good 4gig SD card, put the file on it leoimg and it ran, got to the installing, gave an error, I took it out now. I go into the bootloader now [just read your reply] and it says
RUUNBH
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
[green box]
Upgrade ROM code error Please try again
[Blue box]
[White box]
USB
I have it plugged in via USB now and i'm in the bootloader so i'm guessing this is a good sign, I try running HSPL3_PKG.exe so I can do as you suggested however I get a rapitool.dll error or something, I tried just running the T-Mobile_HD2_MR_Software_2.13.531.1 which is the ROM exe and get some rapitool error as well so I get this genius idea that it must be the lack of windows mobile center6.1 or whatever. I go, download the 32bit and it says its not supporting my processor? so I got the 64 bit and have the feeling i'll get the same error. I'm running Windows Vista, AMD turion x2 so I think it's a 64 bit. I'll reupdate once I try it all again.
UPDATE AGAIN:
I installed windows mobile center [I needed the 64 version dur de duur]
I ran the HSPL3_PKG and got it back to the 2.08.0000
I went to run the 2.13 update and it freezes at 9%, says that theres an error 290 invalid command. I tried to redownload and try again afew times to no luck so far. Here's what the bootloader says now
[RED BOX] RUUNBH
PB81120 ss-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
[GREEN BOX]
Upgrade ROM code error Please try again
so on and so forth.
any ideas would be appreciated lol
CURRENTLY TRYING:
Downloading the stock ROM from that thread [one that's shipped without the SPL?] hopefully it works when I try to run this one and I can just take it back finally. If not and if noone has any ideas i'll just try to bring it back without a ROM on it [I think that's whats happened now] and just say that I tried installing the official update off the tmobile site and power died somehow and I have no idea what happened maybe?
MOST RECENT UPDATE:
OK so here, I got the shipped stock ROM, loaded it up on the microSD and it goes to loading when I go into bootloader and stops. I tried via USB and bootloader and it never makes it past 0% and just stops. I'm currently assuming that there's no actual ROM on my HD2 for now?? When I run the 2.13 ROM by TMob it shows the upgrade from [blank, there's nothing there] and then to: 2.13 before it errors as I have mentioned before.
Currently i'm running out of ideas, I certainly hope I didn't brick my phone and there's gotta be a away around this somehow. If there's nothing there I should try to put HSPL back on and try another custom ROM perhaps? hmm. I'll give it a try since i'm at a loss and noone seems to have any ideas. Please if ya do feel free to share them, I wish I didn't have to experiment like this on my own with not too much knowledge on mobiles. My computer knowledge rests in networking and random bits like Java :s AP comp sci helps not here
*insert happy dance*
slowly but surely i'm learning my way around this...I think
I have done the reverse now and got HSPL back on my phone. Currently I'm trying to install wither the stock rom via USB and bootloader or the Energy.Leo ROM one though both keep freezing about halfway through the install. It's rather annoying because it's happening at what appears to be random times. I'm still considering goign back to SPL and claiming their official update fragged my phone and I have no idea how but I want to keep this trying.
you're sending it back, right? well only the spl is important, doesn't matter about the rom.
so long as in bootloader it says 2.08.0000 or 2.10.0000 then you can send it back.
I think from what i'm hearing your Radio partition is **** up.
Or ur CID isn't working correctly.
Try flashing stock rom with a goldcard....
Or do a task29 and flash stock rom again.
Ended up figuring it out finally, afew days ago, new HD2 should get here tomorrow. I ended up putting the HSPL back onto it, flashing a custom ROM, upgrading it via USB/boot loader screen to the stock ROM that it came shipped with then downloading tmobiles from their site and putting the update onto it and everything is currently as it should be. Radios, ROM and SPL
Hi. I have read a few post's about this but nothing have helped me.
I got it from a friend last night because when u turn it on, it vibrates, and then te screen turns white. The phone has not been upgraded with rom, radio etc.
A so called "original" phone.
I have tryed to flash it with hspl, hspl 2 and so on, but nothing works. I can push the volume buttons and the power button and get to the three color menu, and when i put it in the usb it shows on the screen also, but i cant get anything from it.
Anyone having this problem?! On a "original" phone?!
Info on three-color menu :
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
BR
Vegar
you cant even flash hspl when you're in bootloader? (tricolorscreen)
if so, i would bring it back to the store where you bought it.
they'll see, that everythings untouched on it.
DN41
Can't install hspl even in three-color. Belive me, I have tried many times
Can't return it to the shop either, because it was bought it China
So is it a lost case?
When i tryed to update to : RUU_Leo_HTC_NOR_1.48.409.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
When I come to the : Confirm that u want to update Rom - version :
From:
To:
Pictureversion : 1.48.209.1
Nothing come's up on the "From rom version"
Anybody ?
Ok so i tried to install the Android NAND version on my debvice however i skipped an important step and i cant fix it. i didnt install HSPL 2.08.
My device had 1.42... well i installed MAGLDR 1.11 on 1.42hspl and now i am stuck at a white screen.
i headed over to the HSPL 2.08 thread and theres two files, HSPL.zip and HSLP2_RUN.zip ... if i run the first one i get the "We hacked it screen".
i simply dont know what to do. my phone keeps booting up and saying:
PB8100 HX-BC
SPL-1.42.HSPL XE 0x05 0x40
CotullaHSPL
please help
What do you want to do? To flash back to winmo, put your phone into bootloader mode and flash a rom.
If you still want to go to Android, run HSPL2.exe and select 2.08.hspl in the drop down box. Also make sure that you have the correct radio - 2.08.50 or higher 50
THANK YOU for the quick response. but i want to move forward to Android.
i looked over your post again and spotted my error. when i ran the HSPL2 on the PC i was selecting 1.42 on the list. i guess i read it wrong. now i picked 2.08 HSPL and it booted into the boot menu! THANKs
Pleasure m8, glad you got it sorted
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
News Hound said:
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
Click to expand...
Click to collapse
wrong rom for that phone. Needs to match operator too,(assuming its from an operator) and just cos the sim may be unlocked the rom is always locked. Flashing from SD removed hspl so now the rom checks fail.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
Click to expand...
Click to collapse
Goes to loading cos leoimg is still on SD card. Since you don't have USB, you can now no longer flash hspl, so only sspl, so only winmo cooked roms, and no radio changes. Unlucky.
Is it bricked or is there a way of getting it to work again?
If I can get it back to some form of a functional phone 'er indoors will gladly use it.
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
samsamuel said:
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
Click to expand...
Click to collapse
This solution doesn't appear to work, I've tried every UK version of 3.14 from the HTC website and I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) all to no avail.
News Hound said:
I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) (
Click to expand...
Click to collapse
ALL 1.66 roms are unbranded, the branded 1.66 roms are version 1.72, so you haven't tried any operator branded 1.66 roms.
Note: I've seen a few similar threads with a problem like mine, but my HD2 is showing different error messages, so I thought I'd start a new thread to avoid making things worse.
---------------------------------
So I purchased a second hand HTC HD2 pretty cheap. It's the 512HD2 and it came flashed with a MIUI Android with a Samsung Galaxy S2-ish interface. Problem was, the battery got drained way too quickly, even from the most minimal usage, so I though I should flash back to the stock OS and get my problem solved so I could use the HD2 as a primary phone.
Here's what I did:
1. I followed jayceooi's tutorial.
2. I downloaded a ROM Update for HTC HD2 (3.14.405.2) from HTC's Official HD2 download page.
3. I opened up the .exe, got the .nbh, renamed it correctly, put it on the SD card and then verified it's really there with an Android file manager.
4. VolDown + PowerButton and I got to the rainbow menu thing (I know, I'm a noob and I don't know how it's called) then I let go of the keys and got to the update screen.
5. PowerButton - Update begins
6. 30 seconds later, only after about 1/4 of the bar had progressed, I got a black screen, and then a screen that says "Software update failed. Please try again". Afterwards the gray screen saying "Loading... 00028002 not allow". Finally, back to the RGB screen I got:
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And If i try to enter the boot mode via VolDown+PowerButton I get:
RUUNBH
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Update ROM code error
Please try again
Serial
---------------------------------
Should I try a USB flash or something?
Thanks in advance.
?
Nobody?
Update:
I tried to upgrade from 3.03.0000 SPL to the 3.03.0000 HSPL via USB in the boot mode, but I got a critical error and nothing happened on the device whatsoever - same state as the post above.
Any ideas?
probably wrong stock rom used, (or did you use the phones correct serial to download the rom?)
enter bootloader (three coloured screen)
connect usb
run hspl4
choose 3.03.hspl
back into bootlaoder
connect usb
run the 3.14 rom over usb.
EDIT - just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
samsamuel said:
just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
Click to expand...
Click to collapse
Unfortunately I have only one laptop with a 32 bit Win7, but it's OLD and crapfull of viruses so I'm not risking any failures there.
Do you think it will be safe to HSPL over VMWare (virtual OS environment inside of windows)?
P.S.: Exact model is the HTC HD2 T8585. I checked it via an IMEI checker.
there's a very good chance that hspl wont flash from a virtual machine. (Something about not getting low enough level access to the usb or something).
samsamuel said:
there's a very good chance that hspl wont flash from a virtual machine. (Something about not getting low enough level access to the usb or something).
Click to expand...
Click to collapse
Ok, in that case I'll probably go over at a friend's house and try an HSPL there. I'll come back with some results as soon as I'm done.
Halfway done?
OK, so I got a good Windows 7 32 bit laptop and tried out HSPL4.exe by DFT. I kept my fingers crossed and, thankfully, I got to the "We hacked it! " screen.
After successfully updating and removing the USB cable, the phone rebooted with the same "Software Update Failed" message, but this time the gray screen showed the Cancel/Allow for the leoimg on the SD. I pressed the power button to attempt a flash, but I got the same issue as last time.
After that, the VolDown + PowerButton STILL showed:
SPL-3.03.0000
Since I'm not that stupid (I hope) I figured that the ROM reverts SPL and Radio to normal and that's why there was no trace of the HSPL, so I went back to the laptop to go at another 3.03.0000 HSPL. This time, after I got the "We hacked it! " screen I cancelled the ROM update and thankfully the RGB screen now reads:
P81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40
IN SHORT - The HSPL was a success, now if you help me find the right ROM, I would owe you my life!
lol, i draw the line at advising roms, for example ive never used an android rom with sense, or a MIUI rom, and i havent used a winmo rom in about a year,, so it would be unfair of me to guide you.
ROM
Edit - Okay, thanks for all your help!
P.S.: I just ran an Task29 to get rid of the constant Software Update error at each boot and now I can boot into the RGB screen without the RUUNBH error so I think that will make things easier. I'll probably find the ROM myself or ask somewhere else.
Thanks again!!!
thanks
samsamuel said:
probably wrong stock rom used, (or did you use the phones correct serial to download the rom?)
enter bootloader (three coloured screen)
connect usb
run hspl4
choose 3.03.hspl
back into bootlaoder
connect usb
run the 3.14 rom over usb.
EDIT - just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
Click to expand...
Click to collapse
if you were a girl I would kiss you
You saved my day. I was searching for my problem since 3 days and this has solved the problem
Finally Done!
@ParmakSokan - Hey! Looks like I'm not the only one samsamuel helped!
A little update - I finally have the phone in working condition! It is now running the stock Windows Mobile 6.5 specific for O2, since I figured out the device was purchased in the UK.
For anyone interested, I got the ROM from the official library of HD2 ROMs in 4shared, which I believe is held together thanks to xda-developers, so yeah - yet another KUDOS for that!
The HTC Sense UI is simply beautiful and I think I will actually stay with 6.5 for a few more months before considering 7.5 Mango.
P.S.: Moderators can mark the thread as solved.