If you installed official Froyo 2.2 update.pkg and find your Streak slow and laggy:
Put update zip on your SDCard
For 309 update use http://codex.xiaoka.com/pub/streak/update-3.09.2.zip
For 315 update use http://codex.xiaoka.com/pub/streak/update-3.15.2.zip
For 318 update use http://codex.xiaoka.com/pub/streak/perf-update-3.18.1.zip
Flash 2.5.0.1-streak-clockworkrecovery using fastboot
Install update zip using recovery
This update installs custom kernel, custom build.prop and performance tweaking post_boot.sh script.
It will not erase your system, userdata or anything else. It just replaces some files.
some more info,
# this has steves BFS kernel in it
and my tweaks added, so you don't need to tweak any more
and if you have setcpu installed you may find a nice treat
can you post a video please...i m a noob doing all this stuff
thanks guys, with fards tweaks alone I coulnt get over mid 800s, applied this fix and set cpu ~ 1100mhz and quadrant scores topped the list at 1411!
is setcpu 1.9 safe?
Can we get some better instructions? Im running factory 2.2 update.
Sent from my Dell Streak using XDA App
Broke Wifi.
Will not enable, in settings it simply says "error".
I tried a factory reset and a few reboots.
Suggestions?
Sent from my Dell Streak - Optus® Australia
Performance is phenomenal but lost Wireless
Wow its quick. Response is sweet, but wireless no longer works.
Just shows "Error" everytime I try to start it.
Rebooted and no change.
Should I reflash stock amss?
I hope I won't lose the fix.
Tried to edit my other post, but fail.
In "about", it lists Wifi as having no mac address.
Not sure if that helps with a debug.
Sent from my Dell Streak - Optus® Australia
This is amazing, BUT, no wifi, and my APN settings were wrong for my carrier ( Rogers Wireless ) so i changed them, and 3G will not come back on. I know the settings are correct I have done it 100 times.
Devil Aus said:
Broke Wifi.
Will not enable, in settings it simply says "error".
Click to expand...
Click to collapse
Doh. Baka me.
I forgot to include the kernel modules in the update.
Wait for the update to the update.
androidboy13 said:
This is amazing, BUT, no wifi, and my APN settings were wrong for my carrier ( Rogers Wireless ) so i changed them, and 3G will not come back on. I know the settings are correct I have done it 100 times.
Click to expand...
Click to collapse
fards, there are some 3g tweaks in build.prop from you.
Might this be the cause?
Ahh ok cool.... any eta on "fix".
Cheers.
Sent from my Dell Streak - Optus® Australia
update-3.09.2.zip in the first post - fixes the wifi
smokku said:
fards, there are some 3g tweaks in build.prop from you.
Might this be the cause?
Click to expand...
Click to collapse
Had no issue with data here (brisbane, australia).
G, 3g and hsdpa work fine. Data points were also discovered accurately.
Sent from my Dell Streak - Optus® Australia
smokku said:
update-3.09.2.zip in the first post - fixes the wifi
Click to expand...
Click to collapse
Fantastic, flashing now.
EDIT: Wifi fixed! Thanks.
Sent from my Dell Streak - Optus® Australia
Will this work on the EU 315 build?
OrionBG said:
Will this work on the EU 315 build?
Click to expand...
Click to collapse
As the name states it is for 3.09.
I have no idea whether it will work with 3.15.
Rogers seems to do things differently to most people. I really don't know..
maybe the apns need checking..
but the 3g tweaks can be taken out of build.prop easily enough
it also works fine on the EU 315 build
Sorry to be a pain but can someone point me to a recovery that works with the EU 309 build? so I can install the performance fix zip file.
The Clock recovery I tried, showed the normal green menu etc but just went blank (with a flash of the led's) when I selected an action using the power button? pressimg volume got back to the menu but no good for installing a zip from the SD card?
Thanks in advance
John
Related
go ahead and do the update, or not?. My phone is unrooted, lagfix installed, GPS runs good and so is AP mobile. Everything works flawlessly. I heard/read and saw lots of people have problem with the OTA update. Do i miss anything if i don't do this update? I am thinking of waiting until the Froyo release. I know to do the update, I should remove lagfix, ext 2. My main concern is the availability of AP Mobile after update? Any advices. Thanks.
You may run into issues if you install it with the MobileAP mod.
There's a new version of MobileAP that supports JI6 just fine - you'll just have to reapply that new version from the MobileAP thread after the update. Be sure you undo the lag fix first or you'll be in a world of hurt.
The OTA may fail on your phone even so, but it's easy to flash the JI6 update via ODIN and get everything working again.
Thanks for the replies. The only thing I don't know how to flash using odin.
Sent from my SGH-T959
nguyenmd said:
Thanks for the replies. The only thing I don't know how to flash using odin.
Sent from my SGH-T959
Click to expand...
Click to collapse
You're in the right place.. here are a thread that can help you if you need to use Odin. Hopefully the OTA will work fine.. just remember to undo that lag fix.
http://forum.xda-developers.com/showthread.php?t=803492
Do I also need to remove ext 2? Again thank you for your reply.
Sent from my SGH-T959
nguyenmd said:
Do I also need to remove ext 2? Again thank you for your reply.
Sent from my SGH-T959
Click to expand...
Click to collapse
I used the OCLF, which was an easy one-button undo. I'm not sure about what needs to be done to undo any of the other lagfixes.. maybe those threads have the answers.
HELP Please...
mapinkerton said:
I used the OCLF, which was an easy one-button undo. I'm not sure about what needs to be done to undo any of the other lagfixes.. maybe those threads have the answers.
Click to expand...
Click to collapse
OK. I removed OCLF and EXT2, then go ahead and do the update. However, during the update process, the % bar 0-100%, near the end when it reached 100%, I got a prompt "update failed, your fone will reboot". Now, looks like I am stuck at the boot screen (Vibrant and SAMSUNG screen). What should i do now?
One thing though, I was able to put the phone in the Download mode (volume up/down, pwr button). But when i select re-install packages, i got message "no update.zip file on sdcard". Is it ok if i put "update.zip" file on the SD card (root) and reinstall? Will this restore the phone? Thanks.
I ran into the same thingwhen I tried to install the ota update...ended up having to reflash...i just don't think its worth it to update....if it isn't broke don't fix it...lol
Sent from my SGH-T959 using XDA App
mapinkerton said:
There's a new version of MobileAP that supports JI6 just fine - you'll just have to reapply that new version from the MobileAP thread after the update. Be sure you undo the lag fix first or you'll be in a world of hurt.
The OTA may fail on your phone even so, but it's easy to flash the JI6 update via ODIN and get everything working again.
Click to expand...
Click to collapse
wheres that mobileAP thread?
nguyenmd said:
OK. I removed OCLF and EXT2, then go ahead and do the update. However, during the update process, the % bar 0-100%, near the end when it reached 100%, I got a prompt "update failed, your fone will reboot". Now, looks like I am stuck at the boot screen (Vibrant and SAMSUNG screen). What should i do now?
One thing though, I was able to put the phone in the Download mode (volume up/down, pwr button). But when i select re-install packages, i got message "no update.zip file on sdcard". Is it ok if i put "update.zip" file on the SD card (root) and reinstall? Will this restore the phone? Thanks.
Click to expand...
Click to collapse
Flash The JI6 OTA ROM with odin. Look around, everything you need to do this is on this site.
rshemeld said:
wheres that mobileAP thread?
Click to expand...
Click to collapse
Heres the file. Flash through clockwork.
http://www.mediafire.com/?9pnwe285khb0x3r
Heres the forum link.
http://forum.xda-developers.com/showthread.php?t=756804
rshemeld said:
wheres that mobileAP thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=756804
(first hit found when searching for mobileap)
Edit: I didn't go to page 2.. thanks JD for answering the same question before me
I just got the OTA update and I was rooted and OCLF lag fixed with clockwork installed and wireless tether installed.
After the update I was still rooted, lag fix still worked (quadrant about 2300~ or so) and wireless tether just worked.
To be honest I don't like the update becase of crap running in the background and the new task killer administers vacuum to genital organs of decayed donkeys...but it all went smooth.
I'm even tethered to the phone now
This is only for Telus Fascinate not Verizon Fascniate!!
I'm not good at speaking English just you know (or can somebody rewrite this for me??)
As you know, Telus Fascinate is pretty simillar to Galaxy I9000
The differences between those two are FF Camera, buttons, and some others
Okay Ill shut up and let you know how to flash MIUI/CM7 rom
Flash it at your own risk!!! I'm not responsible for anythings that you just did!! This is only for people who know how to fix your 700$ toy. Read Carefully.!! There might be alot of bugs when you are using this methoud.
Things that you need
1. speedmod-kernel-k13c-500hz.tar
2. Newest Version of MIUI Rom or Newest Version of CM7 Rom
3. cm7-galaxys-initial-kernel.tar
4. galaxy-efsbackup.zip
5. [CM7/MIUI]Telus Fascinate Platypus Kernel
Here is How! (How to flash it, when you are using stock Froyo Rom)
1. Get those files download
2. Copy all these files into your Phone (except speedmod-kernel-k13c-500hz.tar & cm7-galaxys-initial-kernel.tar files)
3. Get into download mode and than flash speedmod-kernel-k13c-500hz.tar with using odin (do not check mark on the repartition!)
4. Get into recovery mode and than install galaxys-efsbackup.zip
5. Turn off your device and than get into download mode again
6. Install cm7-galaxys-initial-kernel.tar with using odin again (do not check mark on the repartition and auto reboot!!!)
7. Unplug your USB and than get into recovery mode again
8. Choose "mounts & storage" and format system, data, and cache
9. Flash MIUI Rom or CM7 Rom
10. Reboot your device and you will see MIUI rom booting and make sure you are in service and 3g working fine. If you dont get any of that you might have to go back to stock Froyo rom and do this steps again.
11. If you have service and 3g data working, go to recovery mode again!!
14. After done flashing it install [CM7/MIUI]Telus Fascinate Platypus Kernel kernel from recovery
15. Reboot your device and you will be running MIUI Rom or CM7 Rom
Starting from Telus Fascinate Platypus Kernle Quorra-r8, there is no need of changing home key and back key
16. There is a problem between home key and back key. They are reversed. so Donload Root Explorer app
17. Run Root Explorer and than go look for /system/usr/keylayout/cypress-touchkey.kl longpress of cypress-touchkey.kl file and you will see Open in Text Editor Press it
18. you will see in your text
key 139 MENU VIRTUAL
key 102 HOME VIRTUAL
key 158 BACK VIRTUAL
key 217 SEARCH VIRTUAL
19. Change this in to
key 139 MENU VIRTUAL
key 158 HOME VIRTUAL
key 102 BACK VIRTUAL
key 217 SEARCH VIRTUAL
20. and save it and reboot your device!!!!!
Please read this guide carefully and flash it at your own risk!!!!!
Sorry for my Bad English !!!!!
Thanks to (please dontae them!!)
The MIUI9000 team :MAMBO04, jblanc and Kenia
CyanogenMod team
zacharias.maladroit for the Kernel Build (Big thanks to you!!)
I know that you guys will understand my guide
I would be happy to test this on my device. Glad to see more roms/tutorials for the telus facinate.
Sent from my GT-I9000 using XDA App
Tested, with my modded way to install CM7 (Cant access recovery with hard key got me hard time ( I am not sharing this way to install as it's really dangerous)). Confirming that everyting is working very well on my phone. + I love this ^^. thx man.
chadouming said:
( I am not sharing this way to install as it's really dangerous)).
Click to expand...
Click to collapse
can you pm me about this part?? i want to test it too.
Which CM 7 files do you recommend using: Galaxy S or Vibrant?
What about flashing back the Telus modem?
daoom said:
Which CM 7 files do you recommend using: Galaxy S or Vibrant?
What about flashing back the Telus modem?
Click to expand...
Click to collapse
I recommend to use GALAXYS and you dont need to worry about flashing back the Telus modem cause it is fine to use jvk modem.
If you want it, i can make one for you.
harimgs said:
I recommend to use GALAXYS and you dont need to worry about flashing back the Telus modem cause it is fine to use jvk modem.
If you want it, i can make one for you.
Click to expand...
Click to collapse
I'm sure it's somewhere already, but it would be nice of you to add it
daoom said:
I'm sure it's somewhere already, but it would be nice of you to add it
Click to expand...
Click to collapse
Can you submit a telus modem file for me??
Magnetic detector isn't working. Has some issues getting to HSPA (Stays on 3g) but everything else works.
I'll rewrite this bad boy for you if you wish.
nvm, I was wrong lol
Doc_rockulus said:
Magnetic detector isn't working. Has some issues getting to HSPA (Stays on 3g) but everything else works.
I'll rewrite this bad boy for you if you wish.
Click to expand...
Click to collapse
you mean g-sensor(gravity sensor) right?
just reboot your device few times 2~3 times, its just a normal problem that everyone has
danboard said:
nvm, I was wrong lol
Click to expand...
Click to collapse
you was wrong about what?
harimgs said:
you mean g-sensor(gravity sensor) right?
just reboot your device few times 2~3 times, its just a normal problem that everyone has
Click to expand...
Click to collapse
No, I'm refering to the built in geo-magnetic sensor. Essentially the built in compass.
Edit: But the accelerometer doesn't work either, I don't particularly care about that.
Also, occasionally after being plugged in, the software seems to ignore the fact that it's charging until reboot. That one sucks because it stops charging while I'm sleeping.
Camera app occasionally won't display a preview until the phone is locked/unlocked with the app open. Widgets disappear puriodically, and sometimes it won't let me fruit ninja
Hey harimgs,
is it normal to constantly bootloop on miui? My phone will bootloop 3 or 4 times then finally boot on the 5th.
danboard said:
Hey harimgs,
is it normal to constantly bootloop on miui? My phone will bootloop 3 or 4 times then finally boot on the 5th.
Click to expand...
Click to collapse
The first few times it takes a while, I think the boot animation is too long/too short. I changed it to a different one (Through the theme manager) and it boots a lot quicker now.
Do I have to flash the CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and then the WiFi fix? Or can I just flash the Wifi fix?
Doc_rockulus said:
Do I have to flash the CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and then the WiFi fix? Or can I just flash the Wifi fix?
Click to expand...
Click to collapse
You gotta flash CM7_TELUS-FASCINATE_platypus-kernel_20110418_16_core.zip and than if your wifi works and everythung else works fine, you dont have to flash wifi fix kernel. If dont flash it
Sent from my GT-I9000 using XDA Premium App
So, say I wanted to overclock the phone, afaik there is no kernel allowing to do that, right? Supercurio's didn't allow it when I used it on my 959D to load Darky's and SimplyHoney and I just flashed CM7 using the instructions in this thread (so I'm now running Platypus kernel).
Also, is there a lagfix included with CM7?
Hey! I was using 2.3.3 miui rom with Platypus everything worked fine, I upgraded myself to the new miui rom which uses 2.3.4 and problem is when I flash the kernel if wont go past the cm7 boot logo. I have flashed it several times and reinstalled the rom still same issue.
So how can I root my phone after the 4.1.83 update?
Also I noticed that my custom Tethering APN works but my laptop can't access internet from it.
Help?!
the custom APN works for me. Just turn it on, restart the phone and try it again, also try resetting your wireless adapter on your laptop....
Chubby_Skunk said:
So how can I root my phone after the 4.1.83 update?
Gingerbreak!
Also I noticed that my custom Tethering APN works but my laptop can't access internet from it.
Update your wireless card drivers!
Help?!
We know!!!
Click to expand...
Click to collapse
///10 chars
1.83 root
Chubby_Skunk said:
So how can I root my phone after the 4.1.83 update?
Also I noticed that my custom Tethering APN works but my laptop can't access internet from it.
Help?!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1044765
**warning** back up ur sdcard since it formats it.
use gladenable for sideloading and tethering.
Ok so I fixed the Tethering problem because i just had to reset the adapter in my laptop and all is good now. It worked before so it couldnt have been the driver problem.
gingerbreak isn't working for me. it just sits there for 10 minutes and doesnt do anything.
graemegb said:
gingerbreak isn't working for me. it just sits there for 10 minutes and doesnt do anything.
Click to expand...
Click to collapse
i had same issue.. then i realized u need an EXT sdcard for it to work.. process only takes maybe 2 minutes.
ooooh! its working normally now. Thank you
I get a message that my account is not set up for wifi hotspot no matter what APN I use. I used to be able to switch APNs, then switch back, and the hotspot would start. After the 4.1.83 update this isn't working.
Is there something I'm missing here?
Can I root 1.8.3 if I never rooted my device before? I am at 1.8.3.
According to Moto downgrading from 1.8.3 is not a good idea.
st167 said:
Can I root 1.8.3 if I never rooted my device before? I am at 1.8.3.
According to Moto downgrading from 1.8.3 is not a good idea.
Click to expand...
Click to collapse
Yes u can. I have also updated and flashed back to 4.1.57 and updated back to 4.1.83 and rooted using gingerbreak
Sent from my MB860 using Tapatalk
Yes, with gingerbreak
Once you update to the latest Atrix 4G release, do not downgrade to a previous version or you will lose functionality. A file system change was made to improve data integrity (for the technically inclined, journaling was enabled on a partition). Once updated, the change cannot be undone through flashing.
Is it safe to flash back?
wont work...cant even install it....i must be an idiot or missing something......security issue pops up and says cant install it
northarkansaschaser said:
wont work...cant even install it....i must be an idiot or missing something......security issue pops up and says cant install it
Click to expand...
Click to collapse
what wont install?? tell me exactly what the problem ur having in details and what ur trying to do so i can help u further..
st167 said:
Can I root 1.8.3 if I never rooted my device before? I am at 1.8.3.
According to Moto downgrading from 1.8.3 is not a good idea.
Click to expand...
Click to collapse
Yes, use GingerBreak to root your device...even on 1.8.3.
waktasz said:
I get a message that my account is not set up for wifi hotspot no matter what APN I use. I used to be able to switch APNs, then switch back, and the hotspot would start. After the 4.1.83 update this isn't working.
Is there something I'm missing here?
Click to expand...
Click to collapse
Same here. I even tried removing my old custom APN and reinstalling via GladEnable.
Chubby_Skunk said:
It worked before so it couldnt have been the driver problem.
Click to expand...
Click to collapse
Not so! Any time you update any software, updated hardware drivers can be needed to maintain compatibility across devices!
Sent from WinBorg 4G using XDA Premium App
justarookie said:
what wont install?? tell me exactly what the problem ur having in details and what ur trying to do so i can help u further..
Click to expand...
Click to collapse
from what i understand your suppose to be able to put it on the sd card on the phone...click it and it run... correct? well idk if other atrix's are different which i know there not....it cannot run, install or do anything unless it is from the market....and it doesn't have the option of an unknown sources check box
i tried using the command prompt before and have tried to learn but i can never get the hang of it....or it never worked for me
only reason i was trying to root (was) is so i could do my hotspot seeing as me and my wife do storm chasing and need the access to the internet but i can setup a whole new apn and do the samething......just have to find att apn settings again
ginger break installed or popped up after trying several time the three different ways to get it on the phone....owell thanks for the help
heres the stock rooted deodexed ver of the latest ruu. added in wireless tether
https://beta.androidfilehost.com/?fid=9390034591667978449
Chg log from AP Features/Enhancements
01. Global support enabled
Issues Resolved
01. Let’s Golf 2 v1.2.1
02. Skype video call – color incorrect
03. Lockup
04. Mobile Hotspot shows incorrect number of devices
05. Time displayed after powering off and then right back on
06. BUA+ read requests
07. BUA+ not displaying in Landscape mode
08. Data stall
09. Mobile IM removed
10. Guided tour video can now be found in “Basic Set-up and Usage Videos”
11. Location settings pop-up removed
12. Data widget updated
13. IPv6 default set to “Enabled”
14. VMM version updated to 0.37
15. Static IP
16. VVM notification in “all Messages” tab after deleting
17. VCAST Music – removed MP3 purchase references
Whooooooo yea, def gonna try it out. See if my roshan sim works.
awesome work!
So is this newer than 3.14.605.12...?
I don't want to be a smartass but yes. 4.*.*.* is newer than 3.*.*.*.
bkhorn said:
I don't want to be a smartass but yes. 4.*.*.* is newer than 3.*.*.*.
Click to expand...
Click to collapse
I know it was a dumb question but I thought 3.xxx was the latest ota so I was surprised that there was even a newer one out...
jonbar87 said:
I know it was a dumb question but I thought 3.xxx was the latest ota so I was surprised that there was even a newer one out...
Click to expand...
Click to collapse
so was everyone else lol
Do you have the firmware files from this update? Didn't see firmware.zip in the file you provide.
Sent from my ADR6425LVW using xda app-developers app
izzaeroth said:
heres the stock rooted deodexed ver of the latest ruu. added in wireless tether
https://beta.androidfilehost.com/?fid=9390034591667978449
Click to expand...
Click to collapse
is this for flash in recovery? or hboot?
Flash n recovery. DSB has firmware files on his thread or grab the ruu from AP
Sent from my ADR6425LVW using xda premium
After flashing this ROM, the phone reboots to the white HTC screen and stays there. Any help figuring out what I did wrong would be appreciated.
anyone having this issues
my default browser is keep showing Precise Location Unavailable
and google Talk showing off line and it will not go on line
i have done clear cash and clear data reboot the phone...
PLEASE HELP
HTC Rezound Rooted
beleynn said:
After flashing this ROM, the phone reboots to the white HTC screen and stays there. Any help figuring out what I did wrong would be appreciated.
Click to expand...
Click to collapse
I did mine from a full wipe. Are you current on the firmware as well?
tracker01 said:
my default browser is keep showing Precise Location Unavailable
and google Talk showing off line and it will not go on line
i have done clear cash and clear data reboot the phone...
PLEASE HELP
HTC Rezound Rooted
Click to expand...
Click to collapse
Is it just the browser that cant get a location or is it maps and other gps apps too? not sure about y gtalk is showing offline.. mine seems to be working. ill look into it if i can
tracker01 said:
my default browser is keep showing Precise Location Unavailable
and google Talk showing off line and it will not go on line
i have done clear cash and clear data reboot the phone...
PLEASE HELP
HTC Rezound Rooted
Click to expand...
Click to collapse
Go into ur browser setting and turn on enable location. Mine did same till I did that
Sent from my ADR6425LVW using xda premium
looks good op. Thanks for the .2 deodexed version!
Where is the firmware for this that we can download?
honestly i flashed the ruu first to get the stuff updated
izzaeroth said:
honestly i flashed the ruu first to get the stuff updated
Click to expand...
Click to collapse
Just flahed ruu' flaxshing trhis now ill let you kniow how it turns out.
Hi There
Yesterday I flashed LiquidSmooth v3.2 and since then i got no signal at all
First i ignored the first config (wifi and google account) as i was ansious to see the rom, and no signal. I thought this was the problem
Then i wiped cache/dalvik and started again as it should be, everything was alright but a lot of error messages on some ui crashed everything
Then i flashed 4.4 jbx cause... what if it was the problem. I don´t even know what to do, I´m newbie and still no signal
There´s also some error mount "/osh" while installing the rom and gapps
when installing jbx there was "set_perm: some changes failed
Now i noticed that airplane mode is looping on switch on/off and this is the causing the problem
But i still don´t know what to do
Need help. Thanks in advance.
Edinho376 said:
Hi There
Yesterday I flashed LiquidSmooth v3.2 and since then i got no signal at all
First i ignored the first config (wifi and google account) as i was ansious to see the rom, and no signal. I thought this was the problem
Then i wiped cache/dalvik and started again as it should be, everything was alright but a lot of error messages on some ui crashed everything
Then i flashed 4.4 jbx cause... what if it was the problem. I don´t even know what to do, I´m newbie and still no signal
There´s also some error mount "/osh" while installing the rom and gapps
when installing jbx there was "set_perm: some changes failed
Now i noticed that airplane mode is looping on switch on/off and this is the causing the problem
But i still don´t know what to do
Need help. Thanks in advance.
Click to expand...
Click to collapse
I have the exact same problem. Sometimes i get full signal with a R sign, but it doesn't work either.
I have also the /osh error, but i think its normal.
I will follow this thread, I hope you can find an answer.
U have a XT912 or XT910? For xt910 install umts_spyder for XT912 the spyder version.
Looks like u have the wrong version installed....
Go to /system/apps and delete the cellbroadcasetreceiver,apk and reboot
please tips please
DumbleCore said:
U have a XT912 or XT910? For xt910 install umts_spyder for XT912 the spyder version.
Looks like u have the wrong version installed....
Click to expand...
Click to collapse
Could be, but mine is XT910 (Razr Maxx); I downloaded umts_spyder.
It´s the right version; I can´t imagine what´s going wrong.
Downloaded tons of tutorials and it doesn´t works either.
None of them [tutorials] talk a thing about this message "Unable to mount "/osh", just mine;
Everything i try to do gives me the message:
"E:Unable to mount '/osh' "
and
"kernel does not have support for reading SELinux contexts"
Click to expand...
Click to collapse
Could be that in root i broke something?
Edinho376 said:
Could be, but mine is XT910 (Razr Maxx); I downloaded umts_spyder.
It´s the right version; I can´t imagine what´s going wrong.
Downloaded tons of tutorials and it doesn´t works either.
None of them [tutorials] talk a thing about this message "Unable to mount "/osh", just mine;
Everything i try to do gives me the message:
Could be that in root i broke something?
Click to expand...
Click to collapse
I have no idea what osh is. But i get it all the time with safetystrap and i just ignore it. doesnt seem to hurt anything.
I would try deleating the slot your using (unless your on stock because you cant). make a new slot. Install the correct rom i.e. umts_spyder for xt910 or spyder for xt912
flash your gapps and try again. v3.2 has been working great for me on slot 2 with no problems so far on my xt912
gitchrodd said:
I have no idea what osh is. But i get it all the time with safetystrap and i just ignore it. doesnt seem to hurt anything.
I would try deleating the slot your using (unless your on stock because you cant). make a new slot. Install the correct rom i.e. umts_spyder for xt910 or spyder for xt912
flash your gapps and try again. v3.2 has been working great for me on slot 2 with no problems so far on my xt912
Click to expand...
Click to collapse
How much space did you use in your slot?
I used 1gb for system
2 gb for data
600mb for cache
Is there any restrictions? What´s the best way?
Edinho376 said:
How much space did you use in your slot?
I used 1gb for system
2 gb for data
600mb for cache
Is there any restrictions? What´s the best way?
Click to expand...
Click to collapse
i just set it at what ever it comes up as when i make the slot. im running three roms carbon on stock, mokee on 1 and smooth on 2. i swear i set mokee at 1g system 2g data and 600mb for cache and when i go back and look its now 1018m system 2586m data and 574m cache. maybe it adjust itself for what it needs if thats possible.
But i dont think you can set it up wrong, as long as you can make the slot your good to go.
Is this normal?
Screenshot attached...
PS: this is the stock rom, that still works.
The screenshot is about the kernel, doubt it´s stock. Maybe when rooting something installed another one.
Just conjectures...
Edinho376 said:
Is this normal?
Screenshot attached...
Click to expand...
Click to collapse
for jellybean? stock rom?
---------- Post added at 06:16 PM ---------- Previous post was at 06:03 PM ----------
Edinho376 said:
Is this normal?
Screenshot attached...
PS: this is the stock rom, that still works.
The screenshot is about the kernel, doubt it´s stock. Maybe when rooting something installed another one.
Just conjectures...
Click to expand...
Click to collapse
well if your in Brazil i would go to mobile networks settings in the stock rom and copy everything down. transfer that to the custom rom see if that helps signal.
not sure about kernel just started playing with that stuff myself and has not gone well for me
you can always take the phone back to stock and start from scratch
rootzwiki.com/topic/13566-how-to-droid-razr-return-to-stock
had to do that when i set some stuff wrong with jbx kernel and got stuck in a boot loop
gitchrodd said:
for jellybean? stock rom?
---------- Post added at 06:16 PM ---------- Previous post was at 06:03 PM ----------
well if your in Brazil i would go to mobile networks settings in the stock rom and copy everything down. transfer that to the custom rom see if that helps signal.
not sure about kernel just started playing with that stuff myself and has not gone well for me
you can always take the phone back to stock and start from scratch
rootzwiki.com/topic/13566-how-to-droid-razr-return-to-stock
had to do that when i set some stuff wrong with jbx kernel and got stuck in a boot loop
Click to expand...
Click to collapse
Think I got everything messed up
Be patient please.. I´m newbie
Each Rom have its own kernel ?
Could you explain better this 'network settings' please? From where do i copy; and where can i paste it?
Edinho376 said:
Think I got everything messed up
Be patient please.. I´m newbie
Each Rom have its own kernel ?
Could you explain better this 'network settings' please? From where do i copy; and where can i paste it?
Click to expand...
Click to collapse
somebody better should probably explain kernels. but as far as i understand each rom is built around a specific kernel?> hopefully someone can jump in and explain that .
for network settings go to settings-mobile networks and write down how its all set up ie, data enabled? roaming, look at preferred network type is?
my phone for verizon in the u.s.a. is set
data enabled ...yes
data roaming ...yes
preferred network type is ....global
system select is set to ....automatic
cdma subscription is set to ....RUIM/SIM
Access Point Names....
one rom i used the preferred network was set to some crazy thing like "EvDo only" i think and i couldn't do better then basic phone calls. had a 1x for data. soon as i switched it to global i was up and running.
Im a newb also but i have screwed my phones up enough times i am starting to learn how to fix things. the razr is a good phone to mess with because as far as i can tell you cant mess it up so bad you cant fix it.
gitchrodd said:
somebody better should probably explain kernels. but as far as i understand each rom is built around a specific kernel?> hopefully someone can jump in and explain that .
for network settings go to settings-mobile networks and write down how its all set up ie, data enabled? roaming, look at preferred network type is?
my phone for verizon in the u.s.a. is set
data enabled ...yes
data roaming ...yes
preferred network type is ....global
system select is set to ....automatic
cdma subscription is set to ....RUIM/SIM
Access Point Names....
one rom i used the preferred network was set to some crazy thing like "EvDo only" i think and i couldn't do better then basic phone calls. had a 1x for data. soon as i switched it to global i was up and running.
Im a newb also but i have screwed my phones up enough times i am starting to learn how to fix things. the razr is a good phone to mess with because as far as i can tell you cant mess it up so bad you cant fix it.
Click to expand...
Click to collapse
Thought network settings was on some script or similar...
I tried this config... didn´t work either
if you can think about something else to try... all ideas are welcome
Edinho376 said:
Thought network settings was on some script or similar...
I tried this config... didn´t work either
if you can think about something else to try... all ideas are welcome
Click to expand...
Click to collapse
try a different rom. Carbon, Axxion, are both really good or CM11
Carbon is my favorite at the moment <my daily driver and flashed as my stock rom
http://forum.xda-developers.com/showthread.php?t=2423299
AxxionKat is a close second but the download server they use has been down for days.
http://forum.xda-developers.com/showthread.php?t=2761434
And for just a good stable basic KitKat you really cant beat CM11
http://forum.xda-developers.com/showthread.php?t=2535920
U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.
DumbleCore said:
U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.
Click to expand...
Click to collapse
Hey man,I must delete that file in almost every KK rom to obtain a signal.Do you?
Sent from my Razr XT910
DumbleCore said:
U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.
Click to expand...
Click to collapse
Yesterday i tried to uninstall 'cellbroadcastreceiver.apk' and everytime i made/ received a call the cell turned off.
Then I just cleaned its data and force close, and it works normally; but i have to do this everytime i turn the phone on.
Coudn´t freeze this apk, cause my titanium backup is free version
What should i do?
welder73 said:
Hey man,I must delete that file in almost every KK rom to obtain a signal.Do you?
Sent from my Razr XT910
Click to expand...
Click to collapse
Edinho376 said:
Yesterday i tried to uninstall 'cellbroadcastreceiver.apk' and everytime i made/ received a call the cell turned off.
Then I just cleaned its data and force close, and it works normally; but i have to do this everytime i turn the phone on.
Coudn´t freeze this apk, cause my titanium backup is free version
What should i do?
Click to expand...
Click to collapse
I´m deleting this file before flashing the rom,everytime!it should not affect the calls or signal if deleted!
i´ve no problems with signal,dowloading with 900kb+ on 3g and so on,really strange.........
this ls rom works perfect for me with great battery
DumbleCore said:
I´m deleting this file before flashing the rom,everytime!it should not affect the calls or signal if deleted!
i´ve no problems with signal,dowloading with 900kb+ on 3g and so on,really strange.........
this ls rom works perfect for me with great battery
Click to expand...
Click to collapse
So I gotta open the zip, delete this apk and flash the rom... did i get?
Edinho376 said:
So I gotta open the zip, delete this apk and flash the rom... did i get?
Click to expand...
Click to collapse
Or you can delete it after,I do it with Es File Explorer.
Sent from my Razr XT910