No Signal [4.4.4 LiquidSmooth v 3.2] [SOLVED] - Motorola Droid RAZR

Hi There
Yesterday I flashed LiquidSmooth v3.2 and since then i got no signal at all
First i ignored the first config (wifi and google account) as i was ansious to see the rom, and no signal. I thought this was the problem
Then i wiped cache/dalvik and started again as it should be, everything was alright but a lot of error messages on some ui crashed everything
Then i flashed 4.4 jbx cause... what if it was the problem. I don´t even know what to do, I´m newbie and still no signal
There´s also some error mount "/osh" while installing the rom and gapps
when installing jbx there was "set_perm: some changes failed
Now i noticed that airplane mode is looping on switch on/off and this is the causing the problem
But i still don´t know what to do
Need help. Thanks in advance.

---

Edinho376 said:
Hi There
Yesterday I flashed LiquidSmooth v3.2 and since then i got no signal at all
First i ignored the first config (wifi and google account) as i was ansious to see the rom, and no signal. I thought this was the problem
Then i wiped cache/dalvik and started again as it should be, everything was alright but a lot of error messages on some ui crashed everything
Then i flashed 4.4 jbx cause... what if it was the problem. I don´t even know what to do, I´m newbie and still no signal
There´s also some error mount "/osh" while installing the rom and gapps
when installing jbx there was "set_perm: some changes failed
Now i noticed that airplane mode is looping on switch on/off and this is the causing the problem
But i still don´t know what to do
Need help. Thanks in advance.
Click to expand...
Click to collapse
I have the exact same problem. Sometimes i get full signal with a R sign, but it doesn't work either.
I have also the /osh error, but i think its normal.
I will follow this thread, I hope you can find an answer.

---

U have a XT912 or XT910? For xt910 install umts_spyder for XT912 the spyder version.
Looks like u have the wrong version installed....

---

Go to /system/apps and delete the cellbroadcasetreceiver,apk and reboot

---

please tips please
DumbleCore said:
U have a XT912 or XT910? For xt910 install umts_spyder for XT912 the spyder version.
Looks like u have the wrong version installed....
Click to expand...
Click to collapse
Could be, but mine is XT910 (Razr Maxx); I downloaded umts_spyder.
It´s the right version; I can´t imagine what´s going wrong.
Downloaded tons of tutorials and it doesn´t works either.
None of them [tutorials] talk a thing about this message "Unable to mount "/osh", just mine;
Everything i try to do gives me the message:
"E:Unable to mount '/osh' "
and
"kernel does not have support for reading SELinux contexts"
Click to expand...
Click to collapse
Could be that in root i broke something?

---

Edinho376 said:
Could be, but mine is XT910 (Razr Maxx); I downloaded umts_spyder.
It´s the right version; I can´t imagine what´s going wrong.
Downloaded tons of tutorials and it doesn´t works either.
None of them [tutorials] talk a thing about this message "Unable to mount "/osh", just mine;
Everything i try to do gives me the message:
Could be that in root i broke something?
Click to expand...
Click to collapse
I have no idea what osh is. But i get it all the time with safetystrap and i just ignore it. doesnt seem to hurt anything.
I would try deleating the slot your using (unless your on stock because you cant). make a new slot. Install the correct rom i.e. umts_spyder for xt910 or spyder for xt912
flash your gapps and try again. v3.2 has been working great for me on slot 2 with no problems so far on my xt912

---

gitchrodd said:
I have no idea what osh is. But i get it all the time with safetystrap and i just ignore it. doesnt seem to hurt anything.
I would try deleating the slot your using (unless your on stock because you cant). make a new slot. Install the correct rom i.e. umts_spyder for xt910 or spyder for xt912
flash your gapps and try again. v3.2 has been working great for me on slot 2 with no problems so far on my xt912
Click to expand...
Click to collapse
How much space did you use in your slot?
I used 1gb for system
2 gb for data
600mb for cache
Is there any restrictions? What´s the best way?

---

Edinho376 said:
How much space did you use in your slot?
I used 1gb for system
2 gb for data
600mb for cache
Is there any restrictions? What´s the best way?
Click to expand...
Click to collapse
i just set it at what ever it comes up as when i make the slot. im running three roms carbon on stock, mokee on 1 and smooth on 2. i swear i set mokee at 1g system 2g data and 600mb for cache and when i go back and look its now 1018m system 2586m data and 574m cache. maybe it adjust itself for what it needs if thats possible.
But i dont think you can set it up wrong, as long as you can make the slot your good to go.

---

Is this normal?
Screenshot attached...
PS: this is the stock rom, that still works.
The screenshot is about the kernel, doubt it´s stock. Maybe when rooting something installed another one.
Just conjectures...

---

Edinho376 said:
Is this normal?
Screenshot attached...
Click to expand...
Click to collapse
for jellybean? stock rom?
---------- Post added at 06:16 PM ---------- Previous post was at 06:03 PM ----------
Edinho376 said:
Is this normal?
Screenshot attached...
PS: this is the stock rom, that still works.
The screenshot is about the kernel, doubt it´s stock. Maybe when rooting something installed another one.
Just conjectures...
Click to expand...
Click to collapse
well if your in Brazil i would go to mobile networks settings in the stock rom and copy everything down. transfer that to the custom rom see if that helps signal.
not sure about kernel just started playing with that stuff myself and has not gone well for me
you can always take the phone back to stock and start from scratch
rootzwiki.com/topic/13566-how-to-droid-razr-return-to-stock
had to do that when i set some stuff wrong with jbx kernel and got stuck in a boot loop

---

gitchrodd said:
for jellybean? stock rom?
---------- Post added at 06:16 PM ---------- Previous post was at 06:03 PM ----------
well if your in Brazil i would go to mobile networks settings in the stock rom and copy everything down. transfer that to the custom rom see if that helps signal.
not sure about kernel just started playing with that stuff myself and has not gone well for me
you can always take the phone back to stock and start from scratch
rootzwiki.com/topic/13566-how-to-droid-razr-return-to-stock
had to do that when i set some stuff wrong with jbx kernel and got stuck in a boot loop
Click to expand...
Click to collapse
Think I got everything messed up
Be patient please.. I´m newbie
Each Rom have its own kernel ?
Could you explain better this 'network settings' please? From where do i copy; and where can i paste it?

---

Edinho376 said:
Think I got everything messed up
Be patient please.. I´m newbie
Each Rom have its own kernel ?
Could you explain better this 'network settings' please? From where do i copy; and where can i paste it?
Click to expand...
Click to collapse
somebody better should probably explain kernels. but as far as i understand each rom is built around a specific kernel?> hopefully someone can jump in and explain that .
for network settings go to settings-mobile networks and write down how its all set up ie, data enabled? roaming, look at preferred network type is?
my phone for verizon in the u.s.a. is set
data enabled ...yes
data roaming ...yes
preferred network type is ....global
system select is set to ....automatic
cdma subscription is set to ....RUIM/SIM
Access Point Names....
one rom i used the preferred network was set to some crazy thing like "EvDo only" i think and i couldn't do better then basic phone calls. had a 1x for data. soon as i switched it to global i was up and running.
Im a newb also but i have screwed my phones up enough times i am starting to learn how to fix things. the razr is a good phone to mess with because as far as i can tell you cant mess it up so bad you cant fix it.

---

gitchrodd said:
somebody better should probably explain kernels. but as far as i understand each rom is built around a specific kernel?> hopefully someone can jump in and explain that .
for network settings go to settings-mobile networks and write down how its all set up ie, data enabled? roaming, look at preferred network type is?
my phone for verizon in the u.s.a. is set
data enabled ...yes
data roaming ...yes
preferred network type is ....global
system select is set to ....automatic
cdma subscription is set to ....RUIM/SIM
Access Point Names....
one rom i used the preferred network was set to some crazy thing like "EvDo only" i think and i couldn't do better then basic phone calls. had a 1x for data. soon as i switched it to global i was up and running.
Im a newb also but i have screwed my phones up enough times i am starting to learn how to fix things. the razr is a good phone to mess with because as far as i can tell you cant mess it up so bad you cant fix it.
Click to expand...
Click to collapse
Thought network settings was on some script or similar...
I tried this config... didn´t work either
if you can think about something else to try... all ideas are welcome

---

Edinho376 said:
Thought network settings was on some script or similar...
I tried this config... didn´t work either
if you can think about something else to try... all ideas are welcome
Click to expand...
Click to collapse
try a different rom. Carbon, Axxion, are both really good or CM11
Carbon is my favorite at the moment <my daily driver and flashed as my stock rom
http://forum.xda-developers.com/showthread.php?t=2423299
AxxionKat is a close second but the download server they use has been down for days.
http://forum.xda-developers.com/showthread.php?t=2761434
And for just a good stable basic KitKat you really cant beat CM11
http://forum.xda-developers.com/showthread.php?t=2535920

---

U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.

---

DumbleCore said:
U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.
Click to expand...
Click to collapse
Hey man,I must delete that file in almost every KK rom to obtain a signal.Do you?
Sent from my Razr XT910

---

DumbleCore said:
U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.
Click to expand...
Click to collapse
Yesterday i tried to uninstall 'cellbroadcastreceiver.apk' and everytime i made/ received a call the cell turned off.
Then I just cleaned its data and force close, and it works normally; but i have to do this everytime i turn the phone on.
Coudn´t freeze this apk, cause my titanium backup is free version
What should i do?

---

welder73 said:
Hey man,I must delete that file in almost every KK rom to obtain a signal.Do you?
Sent from my Razr XT910
Click to expand...
Click to collapse
Edinho376 said:
Yesterday i tried to uninstall 'cellbroadcastreceiver.apk' and everytime i made/ received a call the cell turned off.
Then I just cleaned its data and force close, and it works normally; but i have to do this everytime i turn the phone on.
Coudn´t freeze this apk, cause my titanium backup is free version
What should i do?
Click to expand...
Click to collapse
I´m deleting this file before flashing the rom,everytime!it should not affect the calls or signal if deleted!
i´ve no problems with signal,dowloading with 900kb+ on 3g and so on,really strange.........
this ls rom works perfect for me with great battery

---

DumbleCore said:
I´m deleting this file before flashing the rom,everytime!it should not affect the calls or signal if deleted!
i´ve no problems with signal,dowloading with 900kb+ on 3g and so on,really strange.........
this ls rom works perfect for me with great battery
Click to expand...
Click to collapse
So I gotta open the zip, delete this apk and flash the rom... did i get?

---

Edinho376 said:
So I gotta open the zip, delete this apk and flash the rom... did i get?
Click to expand...
Click to collapse
Or you can delete it after,I do it with Es File Explorer.
Sent from my Razr XT910