I have upgraded my MDA1 from T-Mobile Germany with the actually
downloadable PW2003 Upgrade.
Unfortunately the MMS-Composer (Arcsoft) isn't integrated.
Who knows where to get it with all necessary components included
an has successfully installed yet.
My first test with a received version "MMS Composer v1.6.0.9" failed.
The installation went well, but the application doesn't start.
I get an error message like "some components or libraries missing"
thanks for any help.
http://forum.xda-developers.com/viewtopic.php?t=7466
Hi Biso007
I have read this topic carefully an this also th source, where I dowlnloaded the software. but
I didn't work. the programm does not start. there must be something missing (runtime library or so)
The only difference is that you have a german ROM ... mine is 4.01.00 ENG and this s/w works with no problems at all.
What do you mean by the s/w doesn't start ? ... err message ??
Also, can you see the plugin on Today screen ? ... make sure it's checked and do a soft reset.
I get an error-message by trying to launch the mms-composer
It shows am error-message, saying that there are some components or libraries missing an ist not possible to start the programm.
I can see the plugin in the start-screen.
I did also softresets, but no way.
I believe many applications use standard system DLLs which may have different names in each ROM ... unless you have deleted one of those DLLs by mistake, it seems the German ROM requires special version of the MMS composer.
If you really don't have much on your device and ready to the hassle of reinstalling everything, try a hard reset then install the MMS composer.
I had the same trouble, same error. I'm using Australian O2 XDA with a jsummer brewed ROM 4.00.11 (Non Tmobile) Radio 4.21
Is a 3 part install able version on the forum too. It runs but installs "connections". I wasn't able to set it up to send or recieve MMSes tho.
Yeah, it messed up all connections setting ... I had to do the setup from scratch ... you have to get your operators settings for both GPRS and MMS
I am also looking for a working tool, well at least i found a installable (not in rom) version of EzOS 2.5...
MfG, Michael
Finally I got the Arcsoft MMS-Composer working.
It was necessary to install also the camera dll, even if the qtek1010 doesn't have a camera.
(compare topic http://forum.xda-developers.com/viewtopic.php?t=7466)
Sending MMS runs now very fine, but i still can't receive them.
does anyone know why?
Hi,
When coyping cab files across to the pocket pc, all the cab files belonging to TomTom install, except the main TT cab, it just comes up with an error.
Also does anyone knowwhy after installing tomtom voice 4/5 cant be foumd by TOMTOM. i managed to install totom by manually extracting the files from the cab file! except it crash on run, I belive this to do with the fact it odes not fime the voice files?
Using WM2005 as the OS
Cheers
dogo
Where does it crash?
I've installed the cabs on my wm2005 Himalaya and it crashes on first run..
I can select the language, and define the standard settings (km/miles, time notation etc) than I come to the voice part, which also works..
But after activating the map, it crashes.. The strange thing is, it worked when I installed it on OS 1.50f.. After upgrading to 1.50h it doesn't work anymore (even when I downgraded to 1.50f)..
However, I did install Tomtom 4.4 on my 1.50f installation before installing Tomtom5... I'll try it again.. I hope it works.
Tomtom 5 install
I also had to install 4.4 first ( and config it ), and then Tomtom5
Otherwise it would crash when configuring
Hi,
I've got an issue trying to use some software on my Rose.
Using GW PDA Connect, its installs and synchronises ok the first time (provided I install the software unlocker available from orange developers). Subsequent attempts to run it asks me to reinstall the software. If I attempt to reinstall the application which resides on the smartphone I get the following error:
cesetup.dll
\\Windows\230\XCPCSyncSvr.exe: Error 2
A bit of googling and it basically boils down to the fact this is a Tier-3 security level problem. In order to change the security level I was going to try a registry hack but can't use any registry editor as its not digitally signed for the device.
Any help much appreciated - thanks in advance.
Hi
I have exactly the same problème between my HTC Touch HD (WM6) and GroupWise PDA Connect.
IBM post a solution, but for Lotus Notes :
http://www-01.ibm.com/support/docvi...475&loc=en_US&cs=UTF-8&lang=en&rss=ct465lotus
I don't how to adapt this to Groupwise.
I still search ...
I find a ... solution.
Each time you want to sync with PDA Connect, delete or rename the rep \Windows\230.
It's not a clean solution, but I find anything else.
sweet!
thanks fella, will give it a try.
zoomee said:
Hi,
I've got an issue trying to use some software on my Rose.
Using GW PDA Connect, its installs and synchronises ok the first time (provided I install the software unlocker available from orange developers). Subsequent attempts to run it asks me to reinstall the software. If I attempt to reinstall the application which resides on the smartphone I get the following error:
cesetup.dll
\\Windows\230\XCPCSyncSvr.exe: Error 2
A bit of googling and it basically boils down to the fact this is a Tier-3 security level problem. In order to change the security level I was going to try a registry hack but can't use any registry editor as its not digitally signed for the device.
Any help much appreciated - thanks in advance.
Click to expand...
Click to collapse
Have you tried this: http://forum.xda-developers.com/showthread.php?t=496425
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.
Hi,
I'm running RaduG's TastyGinger 2.0 on my Hero. Since NAVIGON Select isn't working with Android 2.3 ROMs, i've been trying to apply the libmedia.so - Patch which I found around here (sry don't know wo did it, think it was gauner).
Problem now is, libmedia.so has to be replaced - which I am, although my Hero is fully rooted - too stupid for
Tried several "root explorers" (except for Root Explorer itself which isn't free), none worked. So I searched for some pc-based solution, found Android Commander.
This requires Android SDK, no problem, downloaded... "This programm requires Java Development Kit"
okay, downloaded JDK 6 update 24, installed.
Started Android SDK setup again - "This programm requires Java Development Kit".
WTF? didn't I just install it?
Reboot PC - no effect, still same problem.
Does anyone know a solution to my problem? Am kind of desperate cause I want to get NAVIGON working, got no data flat so Google maps is becoming expensive.
Does not matter to me if this solution is PC- or handheld-based, just want to get navigon working
Thank You!
Just hit back and then next again.
tried this, didn't work. also rebooted system several times, but no luck ...
LOL ...this works! I had JDK, but thougth that my version is maybe old (it was't though). So I downloaded update 25 (was 18), installed it and faced the same message "not found" ...it was very funny that that it woks only if you go back and forth but this really works for me!!!
solved, with new version i was able to install without problems. thread may be closed.