I'm sorry if it is duscussed already and if this is the wrong section but I've searched and I'm paniced (sorry if it is the wrong word but my English is not very good). I had a HD2 for 2 months already, booted Android and etc. and it all went good until today... A friend of mine gave a video in youtube in which is shown how to uninstall HSPL. I've followed everything - downloaded the official HTC rom, copied the .nbh file on the SD card, followed the instructions and everything was OK but when I tried to boot it shown the 3-color screen and message "Software update failed. Please try again". In the 3-color screen it says :
SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x05
When I enter in bootloader it gives me the same but with
"Upgrade ROM code error. Please try again."
When connect the USB cable it says "USB" and when the USB cable is disconnected it says "Serial".
If I try to install new official ROM it goes up to 1% and gives an "Error 294 Invalid vender ID".
There is no HSPL (I think so) for my version - 3.03.0000 and I don't know how to downgrade and if there is any way to downgrade.
Please, tell me if there is anything I can do to fix my phone. ;( Thank you.
you have simply tried to flash the wrong 3.14 rom. it has passed the first security test because hspl was installed, updated the spl from hspl to spl 3.03.0000 and then it has run the security test again but this time failed so the flash halts.
enter bootloader and flash ANY CORRECT stock rom. this means if your original rom was example vodafone italy, you need a vodafone italy rom, flash it over usb, job done.
Thank you very very much! It works great!
Related
Hi people,
I got a problem with my hd2.. I was trying to flash it, but now i think i ****ed it up!..
First of all i did the HSPL thing.. And then i was trying to flash it with the original update 1.66 flash..
My mobile was saying that it was not allowed!
Now everytime i start my phone you get the bootloader with the message:
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Updrade ROM code error Please try again!..
I dont know what to do right now
Please help!
and if i try a custom rom.. it says loading... all the time?
Is there someone who can help me?
Did you tray a method with SD card?
First of all you have to format a memory card to FAT32. Then put there a image of original rom. Do do so you need download stock rom from HTC and extract it. There you find a *.nbh file, the largest one. Rename it to LEOIMG.nbh and copy to your SD card.
After that put it into a phone, an enter the bootloader mode. You have to press and hold volume down key. That's all. All you need now is to follow instructions which will be displayed on screen of your phone.
yes i did.. but ill tried the original rom:
RUU_Leo_HTC_NLD_1.43.404.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
But that one is saying: Not allowed :|
you are not the first one this happened to.
look here
http://forum.xda-developers.com/showthread.php?t=618084
here
http://forum.xda-developers.com/showthread.php?t=631276
here
http://forum.xda-developers.com/showthread.php?t=631053
it looks like hspl is not installed on your device with the line SPL-1.66.0000 XE on the screen. it should read SPL-1.42.HSPL XE when it is hsplled. flash the original shipped rom again from bootloader with a goldcard or reflash the hspl
redownload your rom as it might be corruped and causing a bad flash
especially look in the firstlink i gave you.
you have tried to flash 1.66 this is a WWE or ITArom. your device is not hspl-ed so it will not accept a dutch rom. you need a goldcard to flash a dutch rom again or try to reflash a stock WWe rom.
If you are Dutch or using NLD (or equavalent)
Get the official (from htc) ROM, rename the EXTENSION to .ZIP an/or open it with Winrar.
There is a .nbh file in it, wich you need to extract to (for example) your desktop.
Rename it to LEOIMG.nbh and put it on your MicroSD (wich MUST be formateed FAT32)
Put your microSD in the phone.
Start your phone in the BOOTLOADER (keep VOLDOWN pressed and shortly press POWER .. while keeping the voldown button)
Follow the instructions on screen.
Wait till all the options say OKE, even if your phone goes running trough the room, dont click anything!
(you will see some explanation marks and reboots, this is normal).
After you should have flashed SPL 1.66 and able to boot the official ROM.
But the problem is.. All the original roms doesnt work.. They Say "00028002 Not allowed"
The ROM error is because you try to downgrade 1.66 to 1.48, wich is (i think), not allowed, and would answer my own qeustion.
have you tried the goldcard method? if there is a language restriction somewhere this will solve this
I dont understand that goldcard methode.. or.. i cant find how i can do that :$
have never needed itmyself but look here
http://forum.xda-developers.com/showthread.php?t=591239&highlight=goldcard
How can i make a goldcard without a cellphone who can start? :O
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
tighoor said:
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
Click to expand...
Click to collapse
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
kurt-willems said:
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
Click to expand...
Click to collapse
i tried it... but not installed from sd :-S hahaha! now i have bricked hd2. who buy it?
maybe cotulla should make a new hspl that support 3.03 . true?
Same here,flashing stock ROM from the SD Card doesnt help,the SPL 3.03 is there wont let me pass through,we need a new HSPL or else throw the Phone into the garbage can and get a NOKIA.!!
now i understand this is a problem for many users... i find 3 others users that have this problem (in iranians forum)...
My problem too!
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
mmsoftonline said:
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
Click to expand...
Click to collapse
exactly THE SAME THING
flashing to offical wont help either
Dear All,
I just get an HD2 from my cousin...
As it was an old device, I wanted to flash the rom...
It was suppose to be an orange one so I got the last fr orange rom from the htc website
I launch the flashing process and at 92% I got an error because the image was corrupted, I tried others htc roms but it remains locked at the beginning
with the Red Green Blue White Stripes....
"Security Unlocked RUUNBH
PB81100 MFG
SPL-0.67.1000 XD
MicroP(LED) 0x02
MicroP(TOUCH) 0x20
Upgrade ROM code error
Please try again"
What can I do?
Thanks for your assistance...
try to download Task29
Run the program, it whipes your phone to blank
then run the rom update again
Task29 working with a device without hardslp?
Anyone ???
Please
you need hspl on your phone. enter bootloader and then connect via usb. run hspl program (it will work). then flash a new rom.
hspl didn't work... Unknown error, code 0x200006
I tried to update ROM trough SD
update did not end and Phone restarted
now when i tried to update rom stops on 1%
after that goes to bootloader screen
if the phone is powered off there is a triangle with "!"
How could repair it
butch_bs said:
I tried to update ROM trough SD
update did not end and Phone restarted
now when i tried to update rom stops on 1%
after that goes to bootloader screen
if the phone is powered off there is a triangle with "!"
How could repair it
Click to expand...
Click to collapse
Witch Rom version did you try to set?
Way did you it by SD and not over Active Sync?
What are the informations on the bootlouder screen?
Witch stock Rom did you have before?
I had arthemis v42
and wanted to get to 3.14
i put 3.14 on SD Card and started updating
but there was error.
i had message Updating ROM Code Error
after hard reset it desapear when try to uptade ROM from SD Card
give me "00028002 Not Allowed"
and apears bootscreen -> red green blue white
on red =>
HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
When try to upgrade trough sync from bootloader starts updating and on 1%
stops updating.
Tried with Task29 but stops on 19% stops and on PC says
"ERROR 270]: Update Error
The Image File Is corrupted. Please check your Update Utility"
Sir based on the information I see; I have the impression you have a branded device or a device from a otter aria than the stock rom you try to install.
In this case you need to use the GoldCard technique to install stock rom 3.14.
Take a look on how to do this on the first page of Artemis Rom; there is a step by step guide on how to install a other stock ROM version by using GoldCard.
But I don't understand way you will forced your device to instal stock ROM over SD, even when you have receeft multiple warrenties that it wassen't posible to install.
I am done. What I do? there it is:
1. Holded VolDown and started Phone to bootloader with error "Update ROM code error. Please try again."
2. Plugged USB
3. Started this
4. Windows started
5. Update to 3.14 trough PC
Well may be first time when I tried to update rom after Arthemis v42 (it needs SSPL) I am removed HSPL. I don't know is it the problem but directly installing original ROM did not help. Hope this will help someone.
No sir,
But there are some basic rules.
First of all before install stock ROM 3.14 you need to remove your HSPL version. (use HSPL2_RUN.exe and select for ex SPL 1.66)
Secondly you need to install stock ROM 3.14 over active sync (most sure procedure (especially for non users))
Note; by install stock ROM (especially with v 3.14) you need to use the one who is for your device aria/branded device. In case you take a otter version you will get Error 260.
If you have a branded device, you need to use the GoldCard technique.
i have HTC HD2(made in china)
when i press power On Button then show( software update failed please try again)
when i turn on it on flashing mode in color (red greeen blue and white) then it shows.
PB81100 SS-BC
SPL-2.08.0000 8g XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
what i have to do now please help.
depends what you want to do. looks to me as if it has been flashed from sd with a tmous stock rom, which has loaded 2.08.0000 which has then said 'this isn't a tmous' and given your error.
lets say you want to move to android
into bootloader
hspl4 --> 2.08.hspl (not 2.08.0000)
bootloader
flash magldr
magldr menu - usb flasher
use nand toolkit to set system partition size
magldr menu - 8 ad recovery
instal zip from sd card - choose zip - point it at whatever android rom you want to instal (zip on your sd card)
done/
also, you posted in the wrong section, prepare to be lambasted.
Please help again
i can change only hspl only as per below.
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
i want window 6.5 only not any thing . please help........
serial # is SH08PNW01126
made in china.
please help....
get any 3.14 winmo 6.5 rom.
put phone in bootloader, connect usb lead.
run hspl4
in the dropdown choose 3.03.hspl
when phone reboots, go again into bootloader
run the 3.14 rom.exe installaler.
done.
please help...
Thanks my dear for help me
but now i am facing a different problem .
my dear i have done it.
run into boot loader
run SPL4 and from filter SPL3.00 HSPL
Restrat
again start into boot loader
RUN ( ROM Upgrade for HTC HD2 (O2 UK 3.14.206.1)
it didn't completed.
got error
now turn off and didn't getting ON.
where is the fault.????????
please help.
At what % did you get error?
Explain how it won't boot, no power? Suck on boot screen? Can you enter Bootloader?
please help
1st when is going on into boot loader then during updating ROM it has stop at 8%.
after it got OFF and still not showing any thing. even i checked battery voltage . voltages are ok but leo not ok...
but from couple of days its not showing charging ' not showing any thing , even its not showing ( software update failed)
not entering in boot loader.
and not showing any thing on original charger.
I' had my leo with spl-2.08.HSPL (CotullaHSPL); but i wanted to have some fun with it flash some new roms etc.
so i tried to flash it through USB - it didn't work, so i flashed it from SD card.This is how i did it step by step:
1- I've downloaded: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe from this forum
2- extracted the ruu...nbh file changed the name to leoimg
3- loaded it on sd
4- started HTC with voldown + pwrbutton
5- BAM! it did something
Now when it loads i have those infos on screen:
1- Software update failed. Please try again
2- Loading
3- 0028002 not allowed
4- (on bootloader screen)
SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
When i try to voldown+pwr:
1- (on bootloader screen)
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Upgrade ROM code error
Please try again
2- Loading
3- 0028002 not allowed
4- Same as nr 1
It's frustrating that i cannot find a solution (even uncle google failed) so I post it here praying that someone will help me, what to do.
obviously your phone isn't an unbranded wwe.
when you flash a stock rom from sd card, it removes hspl, , then, if the rom isn't correct for its predefined carrier/region, the flash fails.
If you are aiming to run android/wp7 you dont need to do anything, just enter bootloader, apply hspl, then magldr, then android(or wp7)
If you want winmo, then you need to either flash the correct stock rom for that particular phone, or flash hspl followed by a custom rom, or get usb flashing to work.
samsamuel said:
obviously your phone isn't an unbranded wwe.
when you flash a stock rom from sd card, it removes hspl, , then, if the rom isn't correct for its predefined carrier/region, the flash fails.
If you are aiming to run android/wp7 you dont need to do anything, just enter bootloader, apply hspl, then magldr, then android(or wp7)
If you want winmo, then you need to either flash the correct stock rom for that particular phone, or flash hspl followed by a custom rom, or get usb flashing to work.
Click to expand...
Click to collapse
Thanks a lot for a fast replay.
I've solved the problem, coz i managed to get the USB working (only USB 3.0 port seems to work for me)
So if anybody got a similar problem (with usb not working), just stick your plug in every hole possible ;P
I think the thread can be closed.