I' had my leo with spl-2.08.HSPL (CotullaHSPL); but i wanted to have some fun with it flash some new roms etc.
so i tried to flash it through USB - it didn't work, so i flashed it from SD card.This is how i did it step by step:
1- I've downloaded: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe from this forum
2- extracted the ruu...nbh file changed the name to leoimg
3- loaded it on sd
4- started HTC with voldown + pwrbutton
5- BAM! it did something
Now when it loads i have those infos on screen:
1- Software update failed. Please try again
2- Loading
3- 0028002 not allowed
4- (on bootloader screen)
SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
When i try to voldown+pwr:
1- (on bootloader screen)
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Upgrade ROM code error
Please try again
2- Loading
3- 0028002 not allowed
4- Same as nr 1
It's frustrating that i cannot find a solution (even uncle google failed) so I post it here praying that someone will help me, what to do.
obviously your phone isn't an unbranded wwe.
when you flash a stock rom from sd card, it removes hspl, , then, if the rom isn't correct for its predefined carrier/region, the flash fails.
If you are aiming to run android/wp7 you dont need to do anything, just enter bootloader, apply hspl, then magldr, then android(or wp7)
If you want winmo, then you need to either flash the correct stock rom for that particular phone, or flash hspl followed by a custom rom, or get usb flashing to work.
samsamuel said:
obviously your phone isn't an unbranded wwe.
when you flash a stock rom from sd card, it removes hspl, , then, if the rom isn't correct for its predefined carrier/region, the flash fails.
If you are aiming to run android/wp7 you dont need to do anything, just enter bootloader, apply hspl, then magldr, then android(or wp7)
If you want winmo, then you need to either flash the correct stock rom for that particular phone, or flash hspl followed by a custom rom, or get usb flashing to work.
Click to expand...
Click to collapse
Thanks a lot for a fast replay.
I've solved the problem, coz i managed to get the USB working (only USB 3.0 port seems to work for me)
So if anybody got a similar problem (with usb not working), just stick your plug in every hole possible ;P
I think the thread can be closed.
Related
Hi people,
I got a problem with my hd2.. I was trying to flash it, but now i think i ****ed it up!..
First of all i did the HSPL thing.. And then i was trying to flash it with the original update 1.66 flash..
My mobile was saying that it was not allowed!
Now everytime i start my phone you get the bootloader with the message:
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Updrade ROM code error Please try again!..
I dont know what to do right now
Please help!
and if i try a custom rom.. it says loading... all the time?
Is there someone who can help me?
Did you tray a method with SD card?
First of all you have to format a memory card to FAT32. Then put there a image of original rom. Do do so you need download stock rom from HTC and extract it. There you find a *.nbh file, the largest one. Rename it to LEOIMG.nbh and copy to your SD card.
After that put it into a phone, an enter the bootloader mode. You have to press and hold volume down key. That's all. All you need now is to follow instructions which will be displayed on screen of your phone.
yes i did.. but ill tried the original rom:
RUU_Leo_HTC_NLD_1.43.404.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
But that one is saying: Not allowed :|
you are not the first one this happened to.
look here
http://forum.xda-developers.com/showthread.php?t=618084
here
http://forum.xda-developers.com/showthread.php?t=631276
here
http://forum.xda-developers.com/showthread.php?t=631053
it looks like hspl is not installed on your device with the line SPL-1.66.0000 XE on the screen. it should read SPL-1.42.HSPL XE when it is hsplled. flash the original shipped rom again from bootloader with a goldcard or reflash the hspl
redownload your rom as it might be corruped and causing a bad flash
especially look in the firstlink i gave you.
you have tried to flash 1.66 this is a WWE or ITArom. your device is not hspl-ed so it will not accept a dutch rom. you need a goldcard to flash a dutch rom again or try to reflash a stock WWe rom.
If you are Dutch or using NLD (or equavalent)
Get the official (from htc) ROM, rename the EXTENSION to .ZIP an/or open it with Winrar.
There is a .nbh file in it, wich you need to extract to (for example) your desktop.
Rename it to LEOIMG.nbh and put it on your MicroSD (wich MUST be formateed FAT32)
Put your microSD in the phone.
Start your phone in the BOOTLOADER (keep VOLDOWN pressed and shortly press POWER .. while keeping the voldown button)
Follow the instructions on screen.
Wait till all the options say OKE, even if your phone goes running trough the room, dont click anything!
(you will see some explanation marks and reboots, this is normal).
After you should have flashed SPL 1.66 and able to boot the official ROM.
But the problem is.. All the original roms doesnt work.. They Say "00028002 Not allowed"
The ROM error is because you try to downgrade 1.66 to 1.48, wich is (i think), not allowed, and would answer my own qeustion.
have you tried the goldcard method? if there is a language restriction somewhere this will solve this
I dont understand that goldcard methode.. or.. i cant find how i can do that :$
have never needed itmyself but look here
http://forum.xda-developers.com/showthread.php?t=591239&highlight=goldcard
How can i make a goldcard without a cellphone who can start? :O
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
tighoor said:
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
Click to expand...
Click to collapse
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
kurt-willems said:
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
Click to expand...
Click to collapse
i tried it... but not installed from sd :-S hahaha! now i have bricked hd2. who buy it?
maybe cotulla should make a new hspl that support 3.03 . true?
Same here,flashing stock ROM from the SD Card doesnt help,the SPL 3.03 is there wont let me pass through,we need a new HSPL or else throw the Phone into the garbage can and get a NOKIA.!!
now i understand this is a problem for many users... i find 3 others users that have this problem (in iranians forum)...
My problem too!
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
mmsoftonline said:
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
Click to expand...
Click to collapse
exactly THE SAME THING
flashing to offical wont help either
Hi,
I have problem with my HTC HD2- it's stuck in bootloader.
I had HSPL and some random polish rom for few months, then decided to flash Artemis one- so I started with installing SPL.
I took ruu_signed.nbh from the new official LEO rom (3.14), and installed it on SD card (i had deleted all files on the card before that). Then I used bootloader, like I always did...
...but now I can't use it, rom doesn't want to work (power on doesn't work). I tried to flash official rom using PDA installer, but I can't connect it with ActiveSync (it's still in bootloader).
Soft and hard resets don't help.
and now bootloaders says:
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
Micro P(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
Serial (or USB, if it's connected to PC)
I know I've probably broken device, I'm a huge noob.
Sorry for my language, english is not my native language, besides that I'm pretty nervous.
I would be extremely grateful if you can help me.
Probably just the wrong version of ROM.. You already have SPL 3.03 on your device. Download the official ROM from HTC website for your country. Then try the SD card method by renaming it to LEOIMG.nbh. Do not forget to format the Micro SD using FAT32 before you copy the nbh file
Thank you! I was trying with WWE version, but apparently only Eastern Europe version can work on my device ;p
All works, thanks for help again!
Hi
I have a flashed HD2 with these problems.
In Bootloader it says
PB81100 SS-BC
SPL-208.HSPL 8G XE
0X05​CotullaHSPL 0X50
If I try to install HTC RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe it breaks after 1% it says 270 error
HD2 reboots and again white Screen. When I put off/on battery and press Volume down I see bootloader display.
I tried to flash with sd Card, leoimg.nbh on the sdcard breakes after 10%
it says
00018003
LEOIMG.nbh -FAIL
Radio-Fail
I think I have a bootloader problem. How can I remove SPL-2.08.HSPL 8G XE and set the new orginal SPL ?
here bepe says :
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
I made it with HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
but I can't remove HSPL from my bootloader.
How can I set my bootloader back to original htc ?
the topic can be closed
this has solved my problem
http://forum.xda-developers.com/showthread.php?p=24876999#post24876999
I had installd Windows 6.5 everthing was working perfect, then I tried to install Android and clk mod now I get the same in the 1. Posting from me.
I have SPL-3.03 HSPL in the boatloader but I get allways Error 270 I can't uninstall 3.03 HSPL
does anybody have an Idea?
Radio_2.15.50.14.nbh installation fails, but custom rom like energy sucesses. After that again white screen
nobody knows the solution?
You have a stuck radio. Fairly common, with a variety of symptoms. The radio wont let itself be changed which is why custom roms and splashscreens don't have a problem.(radio gets flashed at the start of flashing which is why it always fails around 8-10%) This issue can affect spl to a greater or lesser degree, some people can change spl some can't, some find flashing an older (but correct for that phones cid and region) stock rom, some find chilling the phone allows the flash to take allowing the radio to finally change, some never get anything to flash again.
hi
thank you for your answer. My Bootloader shows
SPL-3.03.HSPL XE
0X05
0X50
if I try to run Task29 via USB Cable, I get Error 270, it breaks sometimes at 16%
reflash 3.03 HSPL with HSPL 4 says it is successfull, but if I try to flash a rom with usb again it shows 270 Error, so my logical deduction is, reflash with HSPL4 does not really flash and it gives wrong answer because others like task28 leo customRUU can't flash over usb cable. HSPL 4 says success but this answer must be fake, after reboot 3.03HSPL remains in the bootloader, I tried to downgrade to 2.08HSPL no chance,
My System is Windows XP SP3 when I connect USB Cable to my HD2 it shows USB in the bootloader but why does it break if I try to flash over USB Cable and give an error 270 ? there must be a connection problem between my laptop and HD2.
I would like to know
Is there any way to flash HSPL4 over microSD card?
Can I see which Radio Rom has been installed ?
its a bit strange
Radio Rom Radio_2.15.50.14 istallation via USB Cable fails after 4%
and via microSD Card ~96-99%
I get
00018003
what can be the reason?
ParmakSokan said:
what can be the reason?
Click to expand...
Click to collapse
as i said,. you have a radio image that isnt allowing itself to be overwritten. My name for it is 'stuck radio' and some people fgind the radio still works fine with, for example, custom roms, it just cant be changed, others find the phone always hangs on grey bootscreen, yet more find taht hspol/spl flashes seem to work but nothing changes, some find chilling it in teh freezer lets a rom flash and suddenly all is well, and yet more find the freezer trick seems to work but doesnt, and yet more try and try and try to sd card flash with their CORRECT stock rom and suddenly without warning teh flash works.
My advcie, Prepare yourself for disappointment, but keep trying,and most importantly READING there are hundreds of threads about this.
mobile radio
ParmakSokan said:
nobody knows the solution?
Click to expand...
Click to collapse
hey gys whats this radio in mobiles... have searched and searched but no ans.....
hi all, I hard formatted my windows phone 6.5, HTC HD2 and started setup for HSPL3 For HTC Leo. The setup started and failed and i'm stuck with it now. it gives me screen
HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
and when i start phone power+volume down with leoimg.nbh in SD card the screen says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
Upgrade ROM code error. please try again
Serial.
Please help!!!
Common issue:
You still have standard SPL installed & thus require a ROM that is correct ROM code of original country/operator which the one on your SD card is not hence "Upgrade ROM code error"
Your 2 options are:
1. Use HSPL 3 or 4 to install a HSPL which bypasses CID lock & allows you to flash any ROM but by USB & RUU, if do from SD it overwrites HSPL with SPL everytime
2. Find a compatable CID code ROM & flash it ...
If this is a T-Mobile USA handset make sure to flash a ROM with correct radio or you will have a brick ...
Mister B said:
If this is a T-Mobile USA handset .
Click to expand...
Click to collapse
it cant possibly be a tmous with 1.42.0000 spl.
@OP, you are in the wrong forum, this is for tmo usa model hd2 only. (That's why there's so few recent posts, , , most tmous users are now in the android forums.
With the phone in the stripey screen (bootloader) connect usb, , when 'serial' changes to 'usb' you are ready to try running hspl again. What are you aiming for? if its android, (meaning your target is 2.08.hspl) use HSPL2 instead.
i have HTC HD2(made in china)
when i press power On Button then show( software update failed please try again)
when i turn on it on flashing mode in color (red greeen blue and white) then it shows.
PB81100 SS-BC
SPL-2.08.0000 8g XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
what i have to do now please help.
depends what you want to do. looks to me as if it has been flashed from sd with a tmous stock rom, which has loaded 2.08.0000 which has then said 'this isn't a tmous' and given your error.
lets say you want to move to android
into bootloader
hspl4 --> 2.08.hspl (not 2.08.0000)
bootloader
flash magldr
magldr menu - usb flasher
use nand toolkit to set system partition size
magldr menu - 8 ad recovery
instal zip from sd card - choose zip - point it at whatever android rom you want to instal (zip on your sd card)
done/
also, you posted in the wrong section, prepare to be lambasted.
Please help again
i can change only hspl only as per below.
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
i want window 6.5 only not any thing . please help........
serial # is SH08PNW01126
made in china.
please help....
get any 3.14 winmo 6.5 rom.
put phone in bootloader, connect usb lead.
run hspl4
in the dropdown choose 3.03.hspl
when phone reboots, go again into bootloader
run the 3.14 rom.exe installaler.
done.
please help...
Thanks my dear for help me
but now i am facing a different problem .
my dear i have done it.
run into boot loader
run SPL4 and from filter SPL3.00 HSPL
Restrat
again start into boot loader
RUN ( ROM Upgrade for HTC HD2 (O2 UK 3.14.206.1)
it didn't completed.
got error
now turn off and didn't getting ON.
where is the fault.????????
please help.
At what % did you get error?
Explain how it won't boot, no power? Suck on boot screen? Can you enter Bootloader?
please help
1st when is going on into boot loader then during updating ROM it has stop at 8%.
after it got OFF and still not showing any thing. even i checked battery voltage . voltages are ok but leo not ok...
but from couple of days its not showing charging ' not showing any thing , even its not showing ( software update failed)
not entering in boot loader.
and not showing any thing on original charger.