Has anyone seen this problem, i have HSPL and maglr installed, with NAND android flashed, the menu button activates the volume adjustment up, and the green button is down,,, i cant use it like this, tried like 5 different builds and get the same problem,, should i flash a new radio?? PLEASE HELP VERY ANNOYING
i had the same problem.
and no idea how to fix it. also on gingerbread.
so I'm back on WM 6.5
but now i have there an other volume problem!
@ PIN screen or later by HD2 hang up on Volume adjustment.
it's like permanently pressing VOL down.
its impossible to do anything :'(
some times i see a error message "cannot open " file" blabla..."
i tried a lot of diff. ROMs. alsways the same.
also HSPL new, Task 29, newest radio.... and so on.
dj_memory said:
i had the same problem.
and no idea how to fix it. also on gingerbread.
so I'm back on WM 6.5
but now i have there an other volume problem!
@ PIN screen or later by HD2 hang up on Volume adjustment.
it's like permanently pressing VOL down.
its impossible to do anything :'(
some times i see a error message "cannot open " file" blabla..."
i tried a lot of diff. ROMs. alsways the same.
also HSPL new, Task 29, newest radio.... and so on.
Click to expand...
Click to collapse
Yeah, i have tried everything also... it started after i flashed HSPL, i hope somebody has had this issue that they were able to fix it, and share with us
possibly the same error as i had?
hy,
it is possible that you have the same hardware caused error as I have?
see my other post http://forum.xda-developers.com/showthread.php?t=829938
Hard SPL your phone first before proceeding.
Don't let your battery to discharge completely, if it happens, connect the charger (red led appears), take out the battery (with the charger still connected, red led remains on), put the battery back (orange led appears) and then fast turn the phone on and enter bootloader mode because there the phone is charging even that no led is on.
Google Android kernel build working from NAND memory.
I am glad to introduce you the result of our hard work, based on the android kernel and tinboot bootloader, made by DZO. I am, vsavichev, working on kernel, my friend hrustile- on design and system, and my friend blyha- on the hardware researching and testing part.
HOWTO Installation process.
Doing on the security unlocked phone under your own responsibility, all unlocking info is here: http://forum.xda-developers.com/showthread.php?t=355730
1. Download Nikeimg.7z, archive contain 2 images, for 20 or 16 keys keyboard.
2. Flash it like usual firmware, which means:
2.2 From the SDcard:rename file NIKEIMG16K(20K).nbh to NIKEIMG.nbh and put it to the root of SD card. Make folder named "andboot" in the root of your SD card and put there android build itself, which usually named "androidinstall.tar",if not, rename it. My recommendation is this one, from my friend hrustile : http://www.multiupload.com/OYW85PFMH1. No need to format SD card or remove any files. Turn off your phone and reboot to bootoader mode (e.g. hold CAMERA and POWER buttons) Then phone will detect itself that there is a firmware is on your SD card and will ask your to press POWER button, so press it. Flashing takes about 20 seconds, after it's over pull the battery or press reset.
2.3 From the PC: same procedure exept no need to put NIKEIMG.NBH on the SD card. You need to put it to the folder with flasher on the PC. The rest same as SD card flashing.
But it's not all!!!
3. Turn device on and wait until i says "Hold down Volume Up or DPad Center to launch installer" press and hold central button, you'll see installer menu. If you missed yo press button- reset and press it directly after seeing some output on the screen.
Choose Data & Sys on "(*) NAND" and press Install android, then answer yes twice. Now installation process is started, wait for a minute or so.
4 And at last after installation is over press Quit, first boot takes some time so be patient. Then enjoy your Android.
Click to expand...
Click to collapse
Working:
1. Sound
1.1 Loud speaker
1.2 Voice speaker
1.3 Headset
1.4 Volume adjusting
2. Network
2.2 Bluetooth
2.3 GSM
2.4 GPRS/EDGE/3G
3. Camera
3.1 Main
3.2 Front
4. Hard Buttons
5. Display
5.1 Touch
5.2 Calibration
6. Power Managment
6.1 Hybernation(Sleep)
6.2 Brightness Adjustment
7. Vibration
Works/Not works
Click to expand...
Click to collapse
Here are the last tested images, archive contains 20k and 16k version. I tried some radios, the best one was 1.71k.
Thank you for your hard work！
Darkforcesteam HD2 Forum developed the android, not a simulation. You can contact them, it is possible to obtain some information. If you need darkforcesteam forum account can contact me, my mailbox [email protected]. My English is poor, which is out through Google translations. Sorry.
Can you solve the BUG android on Chinese support it?Thank you
No, chinese is so far from me, im russian.
First, thanks for the advanced work!
I try this last night, and it looks great and smooth, but I have a problem for it.
Mine is Niki100, the screen touch function seems not working properly. I can't finished unlocking the phone, the screen froze after I slide it from left to right.
Anything I can try?
Looks strange for me, if problem is in locked screen only you can unlock it with double pressing of camera button. Then, if screen is still frezed, long press on POWER and then the RED PHONE, sometimes helps. Anyway, the work is very far from over, so i hope there will be a lot of improovments, this build i put here only to show that there is a hope, because all the previos threeds ended so hopeless.
thank u for your work!
but my phone raido is 1.59,your rom can't work on my phone ,if you fix this BUG, it will be perfect!
I don't think it's possible to fix a kernel for a specific radio, but it will be very useful for me, if everyone who tests my build will post the issues wich he will have for sure and the radio version, so i can find the problems, caused by radio and the problems, caused by kernel.
Latest news, now internet connection working.
What's new? Network connection in my cell phone is normal.
Some improvements, now we have all the functions, like under HARET.
How to install?
It seems when I long-pressed the icon (want to delete home screen shortcut), the screen touch works no more. Sometimes It randomly happened when I press several time short-pressed. Other than that, the phone function works fine, and 3g connection is fine too.
vsavichev said:
Some improvements, now we have all the functions, like under HARET.
Click to expand...
Click to collapse
Do we have update for niki16k ?
poyfoster How long does the screen touch work before freeze? Or it happens just after boot? Please, post your radio version, i need it for statistics too.
About 16k update- you are the first to ask, no problem, i'll make one for you in a couple of hours.
It's this a rom?
How to install ? Its only androidinstall.tar and ZIMAGE. There is no default.txt and Haret and initr.gz, I download this package but still dont know how tu run it. Maybe someone can explain me, my device is HTC touch dual NIKKI 20 keys
It works from NAND, wich means your windows mobile will be gone. So you need to be very sure what are you doing before do something.
So if you still want to flash android, you need to put NIKEIMG.nbh on the rootof sd card,
androidinstall.tar and androidupdate.tgz to /andboot/ folder.
Turn off the device, hold CAMERA and POWER buttons, until you get to bootloader, then press power again.
Now press reset or pull battery off, then power on your phone. After splash screens you will see some fast running output, when you see something like "Hold center or volume up button to install" you need to hold center button. All the other stuff is like usual HARET installation, exept you need to put systrm and data on NAND in installer. After install complete, you need to install update before exit.
I need 16K，thanks
Hello, all ROM makers, developers, hackers and advanced users.
I have a problem and hope you can give me some good advice.
Here is my sad story
You can read the full description if you want. Or you can skip it - the main question in the end of this post..
I have bought a new Sony ericsson Live! with walkman (wt19i) phone during my newyear holydays in Prague. It seemd to be working fine.
It is from rev.3, manufacture date 11/49 (mounth/week)
When I came back home and started using it, I saw that after some inactivity period (about couple hours or maybe more) the touch screen, back and menu snsor buttons stops any responsing. Hardware buttons (home, volume, camera, walkman and power) are still working. The system also continues to work as usual, so I can turn it on (but can not slide to unlock), I can hear if somebody calls me (but can not answer). Alarms, notifications and all another functions are still working.
Once or twise it started to work again (by itself, without any actions by me) but after few time the problem repeated. I was very unhappy and sure it was a hardware problem (and of course the Czech warranty does not work in Russia), but now i'm not so sure.
The phone had 4.0.2.A.0.58 firmware (android 2.3.4) from the box. First of all I tried to install SE PC Companion software, connect phone with usb and make factory reset... touchscreen started to work! But soon I saw this problem again.
The next day a new update was released and installed it (firmware .62). My phone was working again, but with the same result after some time.
You shoud know, that simple softreset (or ejecting and inserting battery) has absolutesy no effect on problem. After system starts I can not even unlock it. But flashing a new (or even the same) firmware (with flash tool or SE PCC) makes touchscreen and buttons working for some time. Have no idea why, but installing ROM with CWM (even with full wipe) does not make touch working.
Then I tried to use another custom kernels and ROMs. I unlocked the bootloader with fastboot tool, flashed one of custom ROMs from this forum (pre-rooted and with CWM). Then tried to use CM7.2 ROM... then another kernel and another ROM. Official, official-based, totally unofficial. The problem was with me each time after couple hours
I thought it is because some troubles in lock screen. Tried to install "no lock" app, so my phone did not use lock... but after some time touch freezes in home screen.
I disabled screen off while charging in settings and tried to leave the phone "wired" for some time... actually it worked fine all the time, and when I dicsonnected it it was still working... for couple hours.
I tried to install "no sleep" applications that does not allow CPU and screen to suspend. But it have no influense.
I even flashed CM9.0 ICS (very) beta ROM with the same result.
If it is just hardware problem - why it solves (for some time, but solves) with flashing? If it is a software problem - why it doesnt solve with new kernels and ROMs? My brain is ready to explode.
Now I have only one last idea and ask you to help me.
The question is:
How can I use adb or adb shell comands to get more information about the problem with touch?
I saw there is some log (logcat, stderr) tools, debug tools. I saw working lsmod, dmesg and mount commands in shell.
I think I shoud get all this information when all is ok. And then get it again when touch stops working and then compare, is it a good idea?
Where exactly shoud I see? How to test or get some touch input device info with adb? Is there any item in /dev that i can explore? Or something in dmesg? Where are touch driver located and how can I check if it is working?
I have some basic linux and andriond skills, but have not enought expierence.
I very (VERY) hope somebody can give me any useful advice to continue solving the problem. Where to see, what to do?
Thank you
P.S.: and sorry for mistakes, of course. English is not my native language.
P.P.S.: i am not sure where is the best place for this question: here or in xperia subforums. But I decided that this question is not xperia-specific and can be useful for other people in future.
Anybody? I have Lenovo Yoga B6000 with touchscreen problem and will be good if anyone know how can i test TS through ADB or shell.
I have i9300 w/stock 4.1.2 rooted. The last few weeks, it started freezing and sometimes rebooting itself. Sometimes it will freeze and not respond with lock screen on. Sometimes it will not respond to pushing a button to wake it up when screen is off. In the beginning, it was once a week. Now it is once or twice a day.
Has anyone else experienced this? Any suggestions?
Thanks!!!!
Basic stickied faqs and guides read the freezing and sudden death syndrome threads .
jje
BaronInkjet said:
I have i9300 w/stock 4.1.2 rooted. The last few weeks, it started freezing and sometimes rebooting itself. Sometimes it will freeze and not respond with lock screen on. Sometimes it will not respond to pushing a button to wake it up when screen is off. In the beginning, it was once a week. Now it is once or twice a day.
Has anyone else experienced this? Any suggestions?
Thanks!!!!
Click to expand...
Click to collapse
I can link you a quote about the freezing
Originally Posted by : Rob2222
The freezes are caused by the sudden death fix. On that kind of freezes the phone unfreeze itself after 5-25 minutes.
The phone freezes when writing data to an affected eMMC block.
An eMMC block is affected, when it's internal block pararameters (as f.e. write count for that block) are in such a state, that these parameters trigger a corrupted block without SD-fix (4.1.1) or trigger a freeze with SD-fix (4.1.2).
When a phone is hitting an affected block with a writiing operation is completely unpredictable.
So these freezes can occur on almost each situation on the smartphone when it writes data.
But you have indeed a higher chance to trigger a freeze when writing much data.
Click to expand...
Click to collapse
Here is a link to that tread click here
If you don't like the freezing i would suggest to flash a stock rom like MB5 or something newer many people reported that they newer had freezing with those roms including myself i used MB1 , MB5 and MC2.
Instruction on how to flash a rom (THIS IS ONLY FOR GT-i9300 International S3 model)
Instructions For Flashing Firmware:
1. Download the firmware (download I9300XXEMC2 here provided by Faryaab)
2. Extract the firmware only once when you get a .tar file don't extract it any further you should also have another file there a small one named something like SS_DL.dll
3. Open the included Odin (click here to download uploaded by Faryaab)
4. Turn off your device
5. Put your device into Download MODE (Home + Volume Down + Power)
6. Connect your device to the PC
7. Click PDA and select *.tar.md5
8. Then finally click START!
When its done your device should boot normally but its recommend that you wipe data and cache for best performance (this will reset your device)
9. Put your device into recovery mode (Home + Volume Up + Power)
10. Chose wipe data then wipe cache and then chose reboot .
Here is the original tread were i got the firmwares and the guide click here
What is strange about my experience is that I never had it at all before a couple of weeks ago. And now ... Nothing changed except perhaps a couple of new apps.
Hummm....
Try a factory reset first.
BaronInkjet said:
What is strange about my experience is that I never had it at all before a couple of weeks ago. And now ... Nothing changed except perhaps a couple of new apps.
Hummm....
Click to expand...
Click to collapse
I linked you a tread about the issue , the bug is in eMMC and the phone dies after about 9 monts but as you have an early 4.1.2 rom with a bug fix that prevents it from dying it starts freezing but the rom i suggested should have a newer fix that doesn't involve freezing . I installed the newer roms because i feared my device was going to die and i don't have warranty , also factory reset should help you but it would only last a few days if you have the SDS issue then it would start freezing again. If you have warranty on the device then stay on that rom and hope your phone will die so you can get it to samsung to fix it for you or you can flash the newer official samsung stock roms and hopefully get rid of the freezing .
Sorry for my english i learned it by playing mmorpgs
Hello guys, firstly, I wanna say this issue I encountered is pretty anodyne, but anyway, I wanna solve it cause it's annoying.
So, I was using a S2 with CM10.2 installed and I wanted to replace it with the [ZERO]BUG ROM v5.0+Premium Suite to, basically, improve its battery life and other minor issues. So I executed an "unclean" install, cause I directly entered CWM and installed the ROM, without installing the stock 4.1.2 via Odin and then again root the phone and install CWM. So it went ok apparently, but everytime I try to lock the screen, it surely locks, but no lock screen appears when I turn it on. Plus, the phone shuts down when I keep the power button pressed 2 seconds, and no power menu appears on the screen before that.
I thought it was a bad "coordination" between the two ROMs, because of the unclean installation, so I installed stock 4.1.2 via Odin to keep in that ROM cause it's pretty good, but still no lock screen or power menu.
So I wanna know how to solve this, cause I'd like to sell the phone and it has to be perfect for that. I don't care to stay in stock, go for CM or another custom CM/stock-based, I just wanna solve it.
So thanks in advance to all of you who are trying to help me.