Has anyone seen this problem, i have HSPL and maglr installed, with NAND android flashed, the menu button activates the volume adjustment up, and the green button is down,,, i cant use it like this, tried like 5 different builds and get the same problem,, should i flash a new radio?? PLEASE HELP VERY ANNOYING
i had the same problem.
and no idea how to fix it. also on gingerbread.
so I'm back on WM 6.5
but now i have there an other volume problem!
@ PIN screen or later by HD2 hang up on Volume adjustment.
it's like permanently pressing VOL down.
its impossible to do anything :'(
some times i see a error message "cannot open " file" blabla..."
i tried a lot of diff. ROMs. alsways the same.
also HSPL new, Task 29, newest radio.... and so on.
dj_memory said:
i had the same problem.
and no idea how to fix it. also on gingerbread.
so I'm back on WM 6.5
but now i have there an other volume problem!
@ PIN screen or later by HD2 hang up on Volume adjustment.
it's like permanently pressing VOL down.
its impossible to do anything :'(
some times i see a error message "cannot open " file" blabla..."
i tried a lot of diff. ROMs. alsways the same.
also HSPL new, Task 29, newest radio.... and so on.
Click to expand...
Click to collapse
Yeah, i have tried everything also... it started after i flashed HSPL, i hope somebody has had this issue that they were able to fix it, and share with us
possibly the same error as i had?
hy,
it is possible that you have the same hardware caused error as I have?
see my other post http://forum.xda-developers.com/showthread.php?t=829938
Related
I keep getting the NO SERVICE in the phone balloon, if i put my simcard in a different phone it works like it shuld.
any1 having same probs? and a solution
Yes! Try to Hard Reset. It worked for me.
click on the green phone9send0 button 8)
i tried hard reset but even putting it in bootmode and then hard reset but it dident reset it was back to its last state (so all the prog's i installed where still there) so that was a bit strange
even when i entered the PIN it gave the NO SERVICE err. i tried everyting. all buttons
any other solutions?
thx !
Hard resetting 2005 is different from 2003
press power + camera + record + small hole at the bottom all at once.
you get KIT, registry hive, storage prompts when you do that. Now release all these buttons and boot.
my solution
I had this problem, I solved it by downgrading my radio rom to version 1.08.
Had the same problem in radio 1.18, downgraded to 1.17, works fine now.
any other solutions?
Click to expand...
Click to collapse
How about going back to diamondROM :twisted:
Hello all,
I have a g4 wiz, 8125 to be specific, and I have done a hard SPL and installed tnt wm 6.1 pro. My problem is I get a few errors that pop up upon startup and then randomly throughout the day. I was hoping someone could help.
IPL 2.21.0001
SPL 2.21.Olip
GSM 2.71.11
OS 11.0.4.0
Errors I get are : cannot execute Tskschedule.exe
cannot execute clocknot.exe
cannot open smartskey
Also no volume on ringer, volume okay on clock alarm tho.....and yes the volume is turned up....lol
Any advice from the guru's?
bueller.....bueller
The Sameeee
heyyyy i have the same problem but my sound worked after i changed the rom first i flashed the TNT 19213 pro and i got ur errors and no sound after that i flashed (with Soft SPl) to tnt 19209 pro and the sound worked very good in all app but some times or mostly i open my wizard i get this cannot exceute errors i leave it and after that it works fine but let me tell u something if u opened ur wizard without the sim card it will work without any error (not talking about the sound ) the sound solved with me when i reflashed to older rom and i don't know y but good luck i'm with u need a solution cuz this errors make my sys not stable
Now, those errors that you are getting happen on most of the custom ROMs for one reason or another...but the sound thing sounds like a bad ROM flash to me....I would try upgrading to a different TNT version OR another ROM and see if that fixes your problem.
helpppppppppp
i think we need a radio update or change it but i don't know how cuz i'm g4 and locked i think i updated the rom with soft spl but the radio i don't know what to do my radio now 02.25.11 and i'm having the cannot excute errors what to dooooo helppppp ?
lowfrontier2000:
How did you flash your Wizard? By RUU or ShellTool/aWizard?
If you are flashing with RUU, you shouldn't have that kind of problems.
where is lowfrontier2000 i feel i'm hijacking his post
respond people wanna help
starkwong said:
lowfrontier2000:
How did you flash your Wizard? By RUU or ShellTool/aWizard?
If you are flashing with RUU, you shouldn't have that kind of problems.
Click to expand...
Click to collapse
I flashed with RUU. Everything went smooth as far as the flash. Meaning no errors no hang ups or anything else. This was my first flash so I was a bit iffy but very pleased that everything went smooth (or so I thought).
Sorry about not responding. It has been a crazy weekend for me.
lowfrontier2000 said:
Errors I get are : cannot execute Tskschedule.exe
cannot execute clocknot.exe
cannot open smartskey
Also no volume on ringer, volume okay on clock alarm tho.....and yes the volume is turned up....lol
Any advice from the guru's?
Click to expand...
Click to collapse
Smartskey and the volume on ringer are probably different problems, but all the rest are from ONE problem. You have too many duplicate files in your notifications. Install DotFred's Task Manager. Go to the notifications tab in the program, and click Delete Duplicates.
For smartskey, go to Windows\Startup and verify that the shortcut is pointing to the right place. (look at the link's file properties). Since from your OS it's apparent you have flashed to WM6, the ROM chef probably put smartskey in Windows\ instead of a programs file (this is a common choice for ROM chefs), so make sure the link goes to the right place. Also make sure you don't have two copies trying to run at the same time, as this definitely will not work!
As for the ringer, make sure you can hear other sounds from the speakers first. Then check to see if you have notifications turned on! Silly, I know, but check it anyways.
i changed the radio to 2.19.11 and my error msgs gone my reception is now normal and cool
u r a hardspl user u just need to install a good radio
i'm softspl user and i used the soft spl method and a step in my question post "Using softspl to flash RADIO ROM possible ? or what"
try to know what is ur radio rom upgrade mood and do it
it will solve ur problems
but the sound thing it happened with me in tnt 19213 and i flashed the 19209 and the sound worked i hope u find my words helpfull
Myrddin Wyllt said:
Smartskey and the volume on ringer are probably different problems, but all the rest are from ONE problem. You have too many duplicate files in your notifications. Install DotFred's Task Manager. Go to the notifications tab in the program, and click Delete Duplicates.
For smartskey, go to Windows\Startup and verify that the shortcut is pointing to the right place. (look at the link's file properties). Since from your OS it's apparent you have flashed to WM6, the ROM chef probably put smartskey in Windows\ instead of a programs file (this is a common choice for ROM chefs), so make sure the link goes to the right place. Also make sure you don't have two copies trying to run at the same time, as this definitely will not work!
As for the ringer, make sure you can hear other sounds from the speakers first. Then check to see if you have notifications turned on! Silly, I know, but check it anyways.
Click to expand...
Click to collapse
I have installed dotfreds and did as you stated. Will I get these errors each time I restart my device? Also by checking the link properties for smartskey it appears that it is pointing to windows and that is where smartskey is installed. Maybe I am missing something. Not sure.
errors are not popping up any more, even after shutting phone off. My only problem now is figuring out why my phone has no volume on the ringer. I do get other sounds out of the speakers and it set to ring in notifications.
This week I stalled an app which totally ****ed up my HD2. I don't remember the name of the app, but installing it resulted in the following:
-Whenever I press the home hardbutton my navipanel starts up and it is very hard to turn it off.
-Whenever I open an sms or email the screen automatically tilts to the landscape mode and doesn't tilt back.
-Whenever I open opera browser the screen automatically tilts to the landscape mode and doesn't tilt back.
-Start softbutton not working.
This is all quite annoying so I did a reset to factory settings. However this didn't solve the problem, so I am assuming that dreadfull app I installed did an override on the factory settings.
So the next thing I tried was installing the latest rom from the htc website, which should have been an easy thing. However it failed midway. Now the issue is that my computer doesn't not recognize my HD2 anymore when I connect it with the cable.
So the question is? What do I do now? I was hoping anyone could help me with this problem. Before when I was a student I had plenty of time to search the net/forums for a solution, but now I am working full time and I already spend most of my weekend trying to solve this issue. So please anyone help me out
whopper said:
This week I stalled an app which totally ****ed up my HD2. I don't remember the name of the app, but installing it resulted in the following:
-Whenever I press the home hardbutton my navipanel starts up and it is very hard to turn it off.
-Whenever I open an sms or email the screen automatically tilts to the landscape mode and doesn't tilt back.
-Whenever I open opera browser the screen automatically tilts to the landscape mode and doesn't tilt back.
This is all quite annoying so I did a reset to factory settings. However this didn't solve the problem, so I am assuming that dreadfull app I installed did an override on the factory settings.
So the next thing I tried was installing the latest rom from the htc website, which should have been an easy thing. However it failed midway. Now the issue is that my computer doesn't not recognize my HD2 anymore when I connect it with the cable.
So the question is? What do I do now? I was hoping anyone could help me with this problem. Before when I was a student I had plenty of time to search the net/forums for a solution, but now I am working full time and I already spend most of my weekend trying to solve this issue. So please anyone help me out
Click to expand...
Click to collapse
i have to leave for work in 5 minutes so i won't be able to follow this up...but..
when you say factory reset, did everything else go back to what it was as you bought it?
1- can you get to bootloader (when booting up phone hold the "down volume"-- i think it is down, may be up. try it.)
2- if so you are good.
3- in bootloader flash hspl
4- flash new rom
I performed the factory reset multiple times and by 2 methods.
-setting->return to factory settings
-turning off the device-> press down the volume up/down buttons and press cancel call button
All settings were turned back to the original settings however the 2 problems (1: tilting screens and 2: unable to detect device on computer) did not disappear.
I tried to do what jsmccabe78 said, but my device just booted up like normal. No bootloader screen or anything.
I have anyone else has an idea.
Make a backup of your contact list.
And make a Hard reset!
In difficult situations, you can maybe use/do a "Task 29"
using the second option I described is a hard reset
try reflashing a stock ROM.
whopper said:
I performed the factory reset multiple times and by 2 methods.
-setting->return to factory settings
-turning off the device-> press down the volume up/down buttons and press cancel call button
All settings were turned back to the original settings however the 2 problems (1: tilting screens and 2: unable to detect device on computer) did not disappear.
I tried to do what jsmccabe78 said, but my device just booted up like normal. No bootloader screen or anything.
I have anyone else has an idea.
Click to expand...
Click to collapse
now what do you see when you boot your phone? have you tried deleting the settings for your phone on your computer for wmdc/activsync? 0have you tried uninstalling wmdc and reinstalling? try those first.
now, if your computer still does not recognize your phone your next option is to load another rom - whether it is a newer official rom or a customized one (your choice.) if you cannot connect your phone you will need to do this with bootloader.
if you can boot your phone, you can get into bootloader.
to get to bootloader:
turn phone off.
hold "volume down" button key.
turn phone on.
this will get you to bootloader. if this doesn't work, i am out of ideas. you need a new rom and you can flash from an storage card, but you need to have hspl first.
let me know.
now you can 1- flash hspl and 2- flash new rom
Sorry for the late response jsmccabe78. Thank you for your response. I got my phone into bootloader mode which enabled me to make a link to my computer. I ran the stock rom that I downloaded from the htc website and it installed succesfully.
Unfortunately this did not solve the problems I described in the OP.
-Whenever I press the home hardbutton my navipanel starts up and it is very hard to turn it off.
-Whenever I open an sms or email the screen automatically tilts to the landscape mode and doesn't tilt back.
-Whenever I open opera browser the screen automatically tilts to the landscape mode and doesn't tilt back.
-Start softbutton not working.
Click to expand...
Click to collapse
Also my computer still doesn't not recognize my HD2 outside of bootloader mode. Reinstalling WMDC did not solve this issue.
I am still thinking these issues are software related and not hardware related. But reinstalling the stockrom should have fixed the issues if it was software related shoud it not?
So 2 questions remain;
1) How do I fix the issues in the OP
2) How do I get my computer to recognize my HD2 outside of bootloader
I hope anyone can help me solve this mystery.
Try it with no sd card in and see if you still have the problems? If you do :Take out your sd card and put it into your pc with card adaptor. Then delete the application data folder on your sd card. If that doesn't work make a back up of whatever stuff is on your sd card and then re-format it, then and copy back your apps and stuff. If you had a rough idea of what it was you installed try and leave that out when you copy your files back to sd. If you didnt have much on your sd card i would suggest to just wipe it totally and start again. Hopefully this should sort it, if not im out of ideas. Hope this helps if not soz but thought id try
I formatted my SD card, used the return-to-factory-settings function again and still the same issues. No connection to my computer and all the above issues... getting a bit desperate here...
Does anyone have an idea what could be the problem here?
Hard SPL your phone first before proceeding.
Don't let your battery to discharge completely, if it happens, connect the charger (red led appears), take out the battery (with the charger still connected, red led remains on), put the battery back (orange led appears) and then fast turn the phone on and enter bootloader mode because there the phone is charging even that no led is on.
Google Android kernel build working from NAND memory.
I am glad to introduce you the result of our hard work, based on the android kernel and tinboot bootloader, made by DZO. I am, vsavichev, working on kernel, my friend hrustile- on design and system, and my friend blyha- on the hardware researching and testing part.
HOWTO Installation process.
Doing on the security unlocked phone under your own responsibility, all unlocking info is here: http://forum.xda-developers.com/showthread.php?t=355730
1. Download Nikeimg.7z, archive contain 2 images, for 20 or 16 keys keyboard.
2. Flash it like usual firmware, which means:
2.2 From the SDcard:rename file NIKEIMG16K(20K).nbh to NIKEIMG.nbh and put it to the root of SD card. Make folder named "andboot" in the root of your SD card and put there android build itself, which usually named "androidinstall.tar",if not, rename it. My recommendation is this one, from my friend hrustile : http://www.multiupload.com/OYW85PFMH1. No need to format SD card or remove any files. Turn off your phone and reboot to bootoader mode (e.g. hold CAMERA and POWER buttons) Then phone will detect itself that there is a firmware is on your SD card and will ask your to press POWER button, so press it. Flashing takes about 20 seconds, after it's over pull the battery or press reset.
2.3 From the PC: same procedure exept no need to put NIKEIMG.NBH on the SD card. You need to put it to the folder with flasher on the PC. The rest same as SD card flashing.
But it's not all!!!
3. Turn device on and wait until i says "Hold down Volume Up or DPad Center to launch installer" press and hold central button, you'll see installer menu. If you missed yo press button- reset and press it directly after seeing some output on the screen.
Choose Data & Sys on "(*) NAND" and press Install android, then answer yes twice. Now installation process is started, wait for a minute or so.
4 And at last after installation is over press Quit, first boot takes some time so be patient. Then enjoy your Android.
Click to expand...
Click to collapse
Working:
1. Sound
1.1 Loud speaker
1.2 Voice speaker
1.3 Headset
1.4 Volume adjusting
2. Network
2.2 Bluetooth
2.3 GSM
2.4 GPRS/EDGE/3G
3. Camera
3.1 Main
3.2 Front
4. Hard Buttons
5. Display
5.1 Touch
5.2 Calibration
6. Power Managment
6.1 Hybernation(Sleep)
6.2 Brightness Adjustment
7. Vibration
Works/Not works
Click to expand...
Click to collapse
Here are the last tested images, archive contains 20k and 16k version. I tried some radios, the best one was 1.71k.
Thank you for your hard work！
Darkforcesteam HD2 Forum developed the android, not a simulation. You can contact them, it is possible to obtain some information. If you need darkforcesteam forum account can contact me, my mailbox [email protected]. My English is poor, which is out through Google translations. Sorry.
Can you solve the BUG android on Chinese support it?Thank you
No, chinese is so far from me, im russian.
First, thanks for the advanced work!
I try this last night, and it looks great and smooth, but I have a problem for it.
Mine is Niki100, the screen touch function seems not working properly. I can't finished unlocking the phone, the screen froze after I slide it from left to right.
Anything I can try?
Looks strange for me, if problem is in locked screen only you can unlock it with double pressing of camera button. Then, if screen is still frezed, long press on POWER and then the RED PHONE, sometimes helps. Anyway, the work is very far from over, so i hope there will be a lot of improovments, this build i put here only to show that there is a hope, because all the previos threeds ended so hopeless.
thank u for your work!
but my phone raido is 1.59,your rom can't work on my phone ,if you fix this BUG, it will be perfect!
I don't think it's possible to fix a kernel for a specific radio, but it will be very useful for me, if everyone who tests my build will post the issues wich he will have for sure and the radio version, so i can find the problems, caused by radio and the problems, caused by kernel.
Latest news, now internet connection working.
What's new? Network connection in my cell phone is normal.
Some improvements, now we have all the functions, like under HARET.
How to install?
It seems when I long-pressed the icon (want to delete home screen shortcut), the screen touch works no more. Sometimes It randomly happened when I press several time short-pressed. Other than that, the phone function works fine, and 3g connection is fine too.
vsavichev said:
Some improvements, now we have all the functions, like under HARET.
Click to expand...
Click to collapse
Do we have update for niki16k ?
poyfoster How long does the screen touch work before freeze? Or it happens just after boot? Please, post your radio version, i need it for statistics too.
About 16k update- you are the first to ask, no problem, i'll make one for you in a couple of hours.
It's this a rom?
How to install ? Its only androidinstall.tar and ZIMAGE. There is no default.txt and Haret and initr.gz, I download this package but still dont know how tu run it. Maybe someone can explain me, my device is HTC touch dual NIKKI 20 keys
It works from NAND, wich means your windows mobile will be gone. So you need to be very sure what are you doing before do something.
So if you still want to flash android, you need to put NIKEIMG.nbh on the rootof sd card,
androidinstall.tar and androidupdate.tgz to /andboot/ folder.
Turn off the device, hold CAMERA and POWER buttons, until you get to bootloader, then press power again.
Now press reset or pull battery off, then power on your phone. After splash screens you will see some fast running output, when you see something like "Hold center or volume up button to install" you need to hold center button. All the other stuff is like usual HARET installation, exept you need to put systrm and data on NAND in installer. After install complete, you need to install update before exit.
I need 16K，thanks
Hi all,
first from all, take my apologies for my english.
Now back to topic, I have a serious problem with my leo (T8585). It was started to freeze from a few weeks, after I changed ROM, but allways i was able to restet it. And now it froze for good. The screen is black and any buttons are not lighting. At the begining when i have removed battery and put it back, i could feel vibration at start but the screen didn't turn on. After several attemps I was able to run the device. And then, when i have tried downgrade radio from 2.15.50.14 to 2.14.50.04, it has showed me a error at the begin of process (0% of progress). I restarted device, but now I don't feel even vibration at start.
What can I do with this? Any ideas? Please, help me
Niko666 said:
Hi all,
first from all, take my apologies for my english.
Now back to topic, I have a serious problem with my leo (T8585). It was started to freeze from a few weeks, after I changed ROM, but allways i was able to restet it. And now it froze for good. The screen is black and any buttons are not lighting. At the begining when i have removed battery and put it back, i could feel vibration at start but the screen didn't turn on. After several attemps I was able to run the device. And then, when i have tried downgrade radio from 2.15.50.14 to 2.14.50.04, it has showed me a error at the begin of process (0% of progress). I restarted device, but now I don't feel even vibration at start.
What can I do with this? Any ideas? Please, help me
Click to expand...
Click to collapse
What ROM did you flash? Maybe it is caused by a bug in the ROM..
Try another different ROM.
I test almost all ROM here, and Radio 2.15 is the best radio so far.
BTW, you need HSPL to flash a Radio or if you dont have HSPL installed, you have to flash the full stock rom.
Cheers