Related
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
bobofosho123 said:
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
Just FYI check to make sure, you swtich USB ports on the PC and also make sure you have all the right drivers installed. Looking at the pics, I see that you are not selecting the rite options. All you need is the PIT & the PDA files selected.
Click to expand...
Click to collapse
chichu_9 said:
bobofosho123 said:
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
Just FYI check to make sure, you swtich USB ports on the PC and also make sure you have all the right drivers installed. Looking at the pics, I see that you are not selecting the rite options. All you need is the PIT & the PDA files selected.
Click to expand...
Click to collapse
yeah I tried that to, didn't work. I used the very first JFD firmware from the backup firmware thread and the .512 pit file as well and that was it, and for some reason ODIN still wouldn't pick up my vibrant. fyi, i was actually able to get it to flash to an odin copy of JI8 a couple hours ago, but now I keep getting a bunch of FC's and ODIN yet again isn't sensing the vibrant in download mode.
Click to expand...
Click to collapse
Sorry to break it to you but its most likely an issue with your computer. Try going to the local library and use one of theirs.
Try getting into download mode first than starting up Odin. If that doesn't work try it in reverse.
Just my .02, but I noticed that if I have Kies open, Odin wont see my Vibrant... Dont know if that is the cause of your problem or that you even have Kies at all.
I'm going to go with make sure you have the correct drivers installed.
If you don't have the drivers
Hit up this thread for the drivers.
Sometimes odin doesn't recognize my phone and I unplug the usb and plug it back in and it pops up..do this while still in download mode and odin open..
Sent from my SGH-T959 using XDA App
constomy said:
Sometimes odin doesn't recognize my phone and I unplug the usb and plug it back in and it pops up..do this while still in download mode and odin open..
Click to expand...
Click to collapse
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Dave08 said:
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Click to expand...
Click to collapse
Yeah I have to do it every time also...I'm running vista...
Sent from my SGH-T959 using XDA App
Dave08 said:
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Click to expand...
Click to collapse
I have also had success with this method. Closing odin and reopening before I re plug is what I have done and have had no issues. Vista Ultimate 64.
I need help. My vibrant is soft bricked. I can access 2e recovery but cannot get into CWM at all. I dont even have the update.zip in my internal. I can get into download mode but odin will not recognize my device. (believe me when I tell you Ive tried it all on multiple computers using different cables, usb slots, etc.). I actually fell asleep at my desk last night trying it all. My question is, can I somehow access the internal storage of my vibrant through my pc possibly ? In order to place the cwm update.zip in the root folder then enabling me to "reinstall packages" through 2e recovery ?
Any help is much appreciated. This is killing me.
Profound said:
I need help. My vibrant is soft bricked. I can access 2e recovery but cannot get into CWM at all. I dont even have the update.zip in my internal. I can get into download mode but odin will not recognize my device. (believe me when I tell you Ive tried it all on multiple computers using different cables, usb slots, etc.). I actually fell asleep at my desk last night trying it all. My question is, can I somehow access the internal storage of my vibrant through my pc possibly ? In order to place the cwm update.zip in the root folder then enabling me to "reinstall packages" through 2e recovery ?
Any help is much appreciated. This is killing me.
Click to expand...
Click to collapse
This helped me:
Originally Posted by fishman0919
Can you try flash my Odin image of KB5 with Odin v1.7 - LINK
It at the bottom of the post. Make sure "Re-Partition" is checked.
It will drop you into Voodoo recovery after... do a factory wipe and then reboot.
Click to expand...
Click to collapse
Sounds like driver issues.. There was a similar post about this the other day. Here is a link that could help you.
http://forum.xda-developers.com/showthread.php?p=26861898
Sent from my SGH-T959 using XDA
Profound said:
I need help. My vibrant is soft bricked. I can access 2e recovery but ...................
Click to expand...
Click to collapse
I gotta get my phone on a charger, so will have to wait and search for the post in a little while, but another person had this issue, and had luck with a windows software that was like an android file explorer or something. Was able to save all his pictures and files. Surely you could also use it to transfer update.zip back to the internal sd.
I will look for that post and get back to you.
Update: this is the thread I was referring to. Hope this helps. I haven't used it, but if it can copy files from the internal, theres the chance it will copy files TO the internal... Good luck!
http://forum.xda-developers.com/showthread.php?p=26783165
Sent from my SGH-T959 using XDA
I can never get ODIN to recognize my phone on Windows7. I always have to use my old PC running XP. Also other devices being plugged into the PC have been known to bork up ODIN.
Good luck!
Sent from my SGH-T959 using xda premium
This package includes:
Repartitioning: Repartition to stock JFD
Reloading: IBL/PBL, PARAM, SBL, SBL2, Kernel, Recovery, FactoryFS and modem
formatting:Cache, DBdata, Data
You may use this code to reformat the SDCard *2767*3855# There is no way to do this from Download Mode. The code will leave the EFS untouched.
This package does not wipe:
SDCard (where your pictures are stored)
EFS(Where your serial number and carrier information is stored)
Instructions:Get the latest version of java here: http://java.com/en/download/installed.jspPut your phone into "Download Mode"Run the program once, and if it does not work, then check the "Flash Bootloaders" checkbox and flash again
Your device will end up as it came from the factory with UVJFD
Download:
Download UVJFD Heimdall One-Click
http://teamkomin.com/Vibrant/T959-UVJFD-Stock-One-Click.jar
Credits:
Thanks to gregc2009 for pointing me at the firmware
This package contains bootloaders from this link: http://forum.xda-developers.com/showthread.php?t=1117990
This package contains UVJFD firmware from this link: http://rootzwiki.com/showthread.php...pps-*-everything&p=11409&viewfull=1#post11409
This package is intended for:
Linux 32
Linux 64
OS-X Leopard
OS-X Snow Leopard
OS-X Lion
Windows XP
Windows Vista
Windows 7
REPARTITIONING ISSUE WITH HEIMDALL 1.3.0
Heimdall currently has an issue with repartitioning. 99% of the time you will not need to repartition. Failure to follow these directions can possibly lead to bricking:
Do not flash bootloaders if you see this message:
Local and device PIT files don't match and repartition wasn't specified!
This message means your partition tables do not match the firmware.
You will need to use Linux to repartition with this firmware package. Install Ubuntu. In Linux, you can copy-pasta this into the terminal to correct the repartitioning problem and then flash bootloaders. http://forum.xda-developers.com/showpost.php?p=17485056&postcount=23
Check this out. Its a way to fix without Odin.
This post is from vibrant dev thread, from AdamOutler
SGH-T959 ICS Gummy 1.2
I've been lurking these forums for awhile now, and have been able to figure things out by researching. But I'm having a little trouble with this. Earlier today I was flashing Nero V3, and had a bad flash(after it finished formatting data). Instead of reflashing another rom while in CWR, I rebooted the phone. This brought me to where I am now, stuck at the Vibrant screen. I can get into DL mode, and get Odin up and running. But Odin wont recognize my phone, and I dont know what to do to get it to work.
I've tried 2 versions of Odin with the same results, and at this point I'm stumped. What can I do to get Odin to recognize my phone?
Any help is greatly appreciated
-Nick
Do you have the PC drivers for your phone installed?
If not try installing the drivers from here:
32 Bit Windows Download | 64 Bit Windows Download
Also, if you have Kies running by chance, it might help to close Kies and not run it while also trying to run Odin.
After making sure your drivers are installed correctly try multiple USB ports. Sometimes the ports are troublesome.
Can your Vibrant be recognized by your computer outside of Odin? If so what version of Odin are you working with?
guess that was the problem. I had them downloaded, just not installed. Thank you.
Hi I installed the drivers and pc still doesnt recognized my phone in download mode. Is there a way to get back to stock without using Odin?
Dude try this method of getting intro download mode.
1.remove the battery from your phone
2.plug the phone in USB to your computer
3.reinstall the battery in your phone while holding the phones power & volume buttons.
That should skip the vibrant screen and power strait to download mode..hope this helps
Sent from my SGH-T959
How do I take my Vibrant that has Bionix on it and return it to factory set, as in when i got it in the box? The whole ODIN isn't working for me. I have the drivers installed on my comp, but when i turn the phone off, it doesn't recognize it. :/
Just find a stock flashable file and flash it through clockwork
U can either keep trying cuz odins a ***** sometimes or try heimdall. I gotta try 5 to 6 times for my laptop to recognize my phone and its drivers. Personally ive never used heimdall but heard its more consistant than odin
Currently running ______________! (<----Insert Rom Name Here)
I can't seem to find one. :/
I would need the stock kernel either?
I have been searching for days.
What do you mean when you turn the phone off? It has to be in download mode in order for it to work, and of that's what you meant and its not being recognized by windows then let me know. I can help you with that.
Sent from my SGH-T959V using Tapatalk
I turn it off to enter download mode (Sorry if i was a bit unclear) I have installed the drivers and it hasn't worked. :/
You doing this on windows? And is it safe to assume you have all the files you need for Odin already? (tar and pit files)
Correct, I followed the guide that was posted and it didn't recognize the fact that I was in download mode on odin. It said that it completed 0/0 threads.
Reboot machine
Right click the Odin shortcut and "run as administrator"
Plug the USB cord into the computer
Remove the battery from your phone, and then plug the USB cord into the phone.
Put the battery back into the phone, and you should then be in download mode.
Those steps worked for me bc like you I was having huge issues getting my pc to recognize the phone. Let me know if that doesnt work.
Also, make sure your Windows Device Manager doesnt have an issue with your phone. Once you open it, it should jump out at you if you do.
If odin isn't working for you, you could use the alternative, Heimdall. The vibrant bible tells you all you need to know. good luck.
I have been posting (and have had some nice people try to help) in the How to Recover Fascinate from any Brick thread for about a week and can't seem to find a solution. I have also searched the internet high and low looking for a solution with no success. Hopefully someone here has had the same issues and can point me in the right direction.
I rooted the Fascinate using a one click method and was able to get a Titanium backup but could not get into the proper recovery to do a system image. Stupidly, I flashed SP Recovery from within ROM Manager. From that moment on I when the phone is turned on it gets to the "Samsung" screen and locks.
I did my research and found out all I needed to do to fix is install ODIN and reflash the stock ROM again. The problem is that ODIN will not recognize the phone. I start ODIN, pull the phone battery, plug the phone into USB cable, push volume down to get the phone into download mode (Yellow Triangle). I keep getting USB Device Not Recognized errors from Win 7 (64-bit).
I tried installing Heimdall to load the correct drivers but it doesn't see the device either. I can connect my Droid or Droid 2 and Heimdall sees immediately so I know it is not a problem with the software or cable.
I have tried to install the correct USB drivers (even the ones listed on this site). I tried installing Kies and it doesn't see the phone either.
Since the phone is looping at the "Samsung" screen I can't change any settings in the phone as some have suggested. I really do not have any more ideas other that to use this phone as a very expensive door stop. Hopefully, someone here can help. Thanks in advance!!!
pscpa said:
I have been posting (and have had some nice people try to help) in the How to Recover Fascinate from any Brick thread for about a week and can't seem to find a solution. I have also searched the internet high and low looking for a solution with no success. Hopefully someone here has had the same issues and can point me in the right direction.
I rooted the Fascinate using a one click method and was able to get a Titanium backup but could not get into the proper recovery to do a system image. Stupidly, I flashed SP Recovery from within ROM Manager. From that moment on I when the phone is turned on it gets to the "Samsung" screen and locks.
I did my research and found out all I needed to do to fix is install ODIN and reflash the stock ROM again. The problem is that ODIN will not recognize the phone. I start ODIN, pull the phone battery, plug the phone into USB cable, push volume down to get the phone into download mode (Yellow Triangle). I keep getting USB Device Not Recognized errors from Win 7 (64-bit).
I tried installing Heimdall to load the correct drivers but it doesn't see the device either. I can connect my Droid or Droid 2 and Heimdall sees immediately so I know it is not a problem with the software or cable.
I have tried to install the correct USB drivers (even the ones listed on this site). I tried installing Kies and it doesn't see the phone either.
Since the phone is looping at the "Samsung" screen I can't change any settings in the phone as some have suggested. I really do not have any more ideas other that to use this phone as a very expensive door stop. Hopefully, someone here can help. Thanks in advance!!!
Click to expand...
Click to collapse
Control Panel/ User Account/ User Account Control settings- set to- Never notify- restart computer.
Should recognize phone. Reset to default when done and restart. Windows crap!
Thanks but this setting has always been set to "Never Notify"......any other ideas...please
I don't know nothing about it but the guy said " reset to default and restart (again)??
Sent from my SCH-I500 using xda premium
Followed the directions exactly. I think the OP wanted me to reset to default after I was done flashing. This is so strange....I figure if the people on XDA can't figure this out the phone is doomed.
Have you tried a different USB plug on the computer? Or a different USB cord? Or a different computer?
Sent from my SCH-I500 using XDA App
schu9120 said:
Have you tried a different USB plug on the computer? Or a different USB cord? Or a different computer?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I had to use a laptop to access my Fascinate because my desktop wouldnt even show it as unrecognized hardware, it was like it didnt even exist... I went in device manager and uninstalled all my usb devices, rebooted with everything but mouse/kb unplugged, installed SDK drivers for Nexus S, rebooted again (probably not needed but better safe than sorry) and I can now Odin into my phone... Hope this helps ya man... sucks bricking a phone
The Heimdall drivers won't work. Kies won't recognize it if it won't boot. There should be an option in Kies to install the driver. Drop down box in the top left corner. Did you try to install your driver that way?
have you installed the driver yet? samsung driver?
I am completely new to this so bear with me. I am trying to root my samsung fascinate. What are the steps i need to take to do so?
http://forum.xda-developers.com/showthread.php?t=1238070
Refer to section 5
http://bit.ly/uLiskn
Use guide by Droidstyle......nuff said
Sent from my SCH-I500 using XDA App
I have been able to do this on my wife's phone pretty easy and all I do it find a copy if CWM recovery (often called CWM all), a copy of update.zip, and the latest version if Odin. Use your factory USB cord and plug your phone into your PC. Let it install all the drivers. Once I stalled open your phone and mount the SD card so you can see it as a hard drive. Place the update.zip file on the SD card, but not in any folder. From there unhook your phone and power it down. Remove the battery and start Odin. Plug your USB part of the phone cord into the PC (don't connect it to the phone yet). Hold down the volume down button and power button while connecting the phone cord to the phone. You will see a yellow triangle and Droid on the screen. From there click the PDA button and find the CWM file you downloaded. Click start and let it do its thing. The phone will power down and you can then replace the battery and start your phone. I usually let my phone power up and then power it down again. After it is off you will then need to hold the volume up, volume down, and power button to boot into recovery. Once in Recovery you can choose the option to install update.zip. Let it do its thing and then reboot the phone. You should be good to go.
icemanwbs said:
Use guide by Droidstyle......nuff said
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
zander78 said:
http://bit.ly/uLiskn
Click to expand...
Click to collapse
LMAO... you crack me up man.
millwood said:
I have been able to do this on my wife's phone pretty easy and all I do it find a copy if CWM recovery (often called CWM all), a copy of update.zip, and the latest version if Odin. Use your factory USB cord and plug your phone into your PC. Let it install all the drivers. Once I stalled open your phone and mount the SD card so you can see it as a hard drive. Place the update.zip file on the SD card, but not in any folder. From there unhook your phone and power it down. Remove the battery and start Odin. Plug your USB part of the phone cord into the PC (don't connect it to the phone yet). Hold down the volume down button and power button while connecting the phone cord to the phone. You will see a yellow triangle and Droid on the screen. From there click the PDA button and find the CWM file you downloaded. Click start and let it do its thing. The phone will power down and you can then replace the battery and start your phone. I usually let my phone power up and then power it down again. After it is off you will then need to hold the volume up, volume down, and power button to boot into recovery. Once in Recovery you can choose the option to install update.zip. Let it do its thing and then reboot the phone. You should be good to go.
Click to expand...
Click to collapse
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
stevebanks said:
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
Click to expand...
Click to collapse
no...you need odin to flash cwm recovery so you can three finger into that recovery to flash the superuser.zip
Try another Pc!
stevebanks said:
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
Click to expand...
Click to collapse
I think you can root the phone without having to flash CWM recovery, but it does require ADB so I don't know if that would be any help. FWIW, I have a mac too, and haven't had any luck using heimdall (it doesn't recognize the device), although I haven't tried any sort of VM or anything like crossover to use odin on it. I've just accepted using a windows machine when odin is required
Does your ADB work with other devices? For whatever reason, I couldn't get it working with the fascinate, then I tried it a few days ago and it worked all of a sudden. Another workaround is to use the wirelessADB app from the market. If you search for "galaxy s mac" you'll see that you're unfortunately definitely not alone in having connectivity issues with OSX.
k_nivesout said:
I think you can root the phone without having to flash CWM recovery, but it does require ADB so I don't know if that would be any help. FWIW, I have a mac too, and haven't had any luck using heimdall (it doesn't recognize the device), although I haven't tried any sort of VM or anything like crossover to use odin on it. I've just accepted using a windows machine when odin is required
Does your ADB work with other devices? For whatever reason, I couldn't get it working with the fascinate, then I tried it a few days ago and it worked all of a sudden. Another workaround is to use the wirelessADB app from the market. If you search for "galaxy s mac" you'll see that you're unfortunately definitely not alone in having connectivity issues with OSX.
Click to expand...
Click to collapse
very true...ADB is another option to root, but I never recomend it because most folks will have trouble using it....dont mean the in a condescending way, just sayin.
For sure, just thought I would throw it out there. Looks fairly simple actually from the guide nitsuj17 posted in the OP of the EH03 odin/heimdall package, well maybe straightforward would be a better word, just since it's laid out step-by-step.
I actually had problems using cwm... it failed to flash the su.zip properly. So I used the latest version of GeeWiz recovery on stock EH03. Worked fine. Roots every time. #hopethathelps
Sent from my SCH-I500 using xda premium
There is a thread with a stock root with voodoo lag fix and ROM manager. Step by step instructions as well.
Sent from my SGH-T959P using xda premium
cant install roms
Hi, guys new to rooting and custom roms but ive hit a snag.
I have acheived root by using section 5 here (http://forum.xda-developers.com/showthread.php?t=1238070)
but i cannot install any roms all i get when i select the zip file is a screen that shows the unpacking then it goes to a triangle with an exclamation point. then reboots into normal android loosing everything i had installed. i made a backup using rom manager but it has dissapeared so now i have nothing to lose. can anyoone help.
all i want to be able to do is put ics with very few apps and overclock my cpu
Any help would be great
Samsung fascinate running android2.3.5 with superuser
thx
1. You don't need to be root first before flashing roms.
2. It sounds like you're possibly booting into the stock recovery.
If you want to flash ICS, just follow the steps in that section 3 of the guide you've already been using.
I tried but it failed on step 9/10
So you're saying that it fails after you press start in odin (flashing the stock EH03 package)? What error are you getting and when exactly is it happening?
If you're not on any rom and just on stock EH03, I'd think you should be able to just odin the CWM recovery and install ICS from there.
not sure what the exact message was but yes after i hit start it initalized did nothing for about 3 minutes of the five and got a fail message
And you're sure you're using the correct files and selecting the right things in odin? Make sure the stock EH03 rom is in the PDA section, the atlas 2.2 file for PIT, and repartition is checked. Could possibly be a bad download too, I'd maybe try redownloading the files and trying again. Also, are you using Odin 1.3 that was linked in the guide?
Alternatively, you could just try flashing the CWM4 fixed for CM7 in odin, then three-finger into recovery and flash ICS from there.
Oh and just making sure you're getting into download mode the right way, I personally pull the battery, that way it doesn't reboot after you flash whatever it is you're flashing. If none of that works, I'd try a different USB port/cable. Is odin recognizing the device properly?