Related
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
bobofosho123 said:
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
Just FYI check to make sure, you swtich USB ports on the PC and also make sure you have all the right drivers installed. Looking at the pics, I see that you are not selecting the rite options. All you need is the PIT & the PDA files selected.
Click to expand...
Click to collapse
chichu_9 said:
bobofosho123 said:
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
Just FYI check to make sure, you swtich USB ports on the PC and also make sure you have all the right drivers installed. Looking at the pics, I see that you are not selecting the rite options. All you need is the PIT & the PDA files selected.
Click to expand...
Click to collapse
yeah I tried that to, didn't work. I used the very first JFD firmware from the backup firmware thread and the .512 pit file as well and that was it, and for some reason ODIN still wouldn't pick up my vibrant. fyi, i was actually able to get it to flash to an odin copy of JI8 a couple hours ago, but now I keep getting a bunch of FC's and ODIN yet again isn't sensing the vibrant in download mode.
Click to expand...
Click to collapse
Sorry to break it to you but its most likely an issue with your computer. Try going to the local library and use one of theirs.
Try getting into download mode first than starting up Odin. If that doesn't work try it in reverse.
Just my .02, but I noticed that if I have Kies open, Odin wont see my Vibrant... Dont know if that is the cause of your problem or that you even have Kies at all.
I'm going to go with make sure you have the correct drivers installed.
If you don't have the drivers
Hit up this thread for the drivers.
Sometimes odin doesn't recognize my phone and I unplug the usb and plug it back in and it pops up..do this while still in download mode and odin open..
Sent from my SGH-T959 using XDA App
constomy said:
Sometimes odin doesn't recognize my phone and I unplug the usb and plug it back in and it pops up..do this while still in download mode and odin open..
Click to expand...
Click to collapse
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Dave08 said:
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Click to expand...
Click to collapse
Yeah I have to do it every time also...I'm running vista...
Sent from my SGH-T959 using XDA App
Dave08 said:
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Click to expand...
Click to collapse
I have also had success with this method. Closing odin and reopening before I re plug is what I have done and have had no issues. Vista Ultimate 64.
I need help. My vibrant is soft bricked. I can access 2e recovery but cannot get into CWM at all. I dont even have the update.zip in my internal. I can get into download mode but odin will not recognize my device. (believe me when I tell you Ive tried it all on multiple computers using different cables, usb slots, etc.). I actually fell asleep at my desk last night trying it all. My question is, can I somehow access the internal storage of my vibrant through my pc possibly ? In order to place the cwm update.zip in the root folder then enabling me to "reinstall packages" through 2e recovery ?
Any help is much appreciated. This is killing me.
Profound said:
I need help. My vibrant is soft bricked. I can access 2e recovery but cannot get into CWM at all. I dont even have the update.zip in my internal. I can get into download mode but odin will not recognize my device. (believe me when I tell you Ive tried it all on multiple computers using different cables, usb slots, etc.). I actually fell asleep at my desk last night trying it all. My question is, can I somehow access the internal storage of my vibrant through my pc possibly ? In order to place the cwm update.zip in the root folder then enabling me to "reinstall packages" through 2e recovery ?
Any help is much appreciated. This is killing me.
Click to expand...
Click to collapse
This helped me:
Originally Posted by fishman0919
Can you try flash my Odin image of KB5 with Odin v1.7 - LINK
It at the bottom of the post. Make sure "Re-Partition" is checked.
It will drop you into Voodoo recovery after... do a factory wipe and then reboot.
Click to expand...
Click to collapse
Sounds like driver issues.. There was a similar post about this the other day. Here is a link that could help you.
http://forum.xda-developers.com/showthread.php?p=26861898
Sent from my SGH-T959 using XDA
Profound said:
I need help. My vibrant is soft bricked. I can access 2e recovery but ...................
Click to expand...
Click to collapse
I gotta get my phone on a charger, so will have to wait and search for the post in a little while, but another person had this issue, and had luck with a windows software that was like an android file explorer or something. Was able to save all his pictures and files. Surely you could also use it to transfer update.zip back to the internal sd.
I will look for that post and get back to you.
Update: this is the thread I was referring to. Hope this helps. I haven't used it, but if it can copy files from the internal, theres the chance it will copy files TO the internal... Good luck!
http://forum.xda-developers.com/showthread.php?p=26783165
Sent from my SGH-T959 using XDA
I can never get ODIN to recognize my phone on Windows7. I always have to use my old PC running XP. Also other devices being plugged into the PC have been known to bork up ODIN.
Good luck!
Sent from my SGH-T959 using xda premium
This package includes:
Repartitioning: Repartition to stock JFD
Reloading: IBL/PBL, PARAM, SBL, SBL2, Kernel, Recovery, FactoryFS and modem
formatting:Cache, DBdata, Data
You may use this code to reformat the SDCard *2767*3855# There is no way to do this from Download Mode. The code will leave the EFS untouched.
This package does not wipe:
SDCard (where your pictures are stored)
EFS(Where your serial number and carrier information is stored)
Instructions:Get the latest version of java here: http://java.com/en/download/installed.jspPut your phone into "Download Mode"Run the program once, and if it does not work, then check the "Flash Bootloaders" checkbox and flash again
Your device will end up as it came from the factory with UVJFD
Download:
Download UVJFD Heimdall One-Click
http://teamkomin.com/Vibrant/T959-UVJFD-Stock-One-Click.jar
Credits:
Thanks to gregc2009 for pointing me at the firmware
This package contains bootloaders from this link: http://forum.xda-developers.com/showthread.php?t=1117990
This package contains UVJFD firmware from this link: http://rootzwiki.com/showthread.php...pps-*-everything&p=11409&viewfull=1#post11409
This package is intended for:
Linux 32
Linux 64
OS-X Leopard
OS-X Snow Leopard
OS-X Lion
Windows XP
Windows Vista
Windows 7
REPARTITIONING ISSUE WITH HEIMDALL 1.3.0
Heimdall currently has an issue with repartitioning. 99% of the time you will not need to repartition. Failure to follow these directions can possibly lead to bricking:
Do not flash bootloaders if you see this message:
Local and device PIT files don't match and repartition wasn't specified!
This message means your partition tables do not match the firmware.
You will need to use Linux to repartition with this firmware package. Install Ubuntu. In Linux, you can copy-pasta this into the terminal to correct the repartitioning problem and then flash bootloaders. http://forum.xda-developers.com/showpost.php?p=17485056&postcount=23
Check this out. Its a way to fix without Odin.
This post is from vibrant dev thread, from AdamOutler
SGH-T959 ICS Gummy 1.2
Hello everyone,
I have been trying to find a way to get out of the Vibrant screen for my phone.
This happen by me having the Obsidian 4.2 installed with Black Froyo, and I was trying to restore to get the Sims 3 and Thinkfree office because it was not available when I flashed my phone.
I have a backup using ROM Manager on my laptop. I am using a Mac, and I have Parallels installed with XP. Problem is I have ODIN installed and been trying to have ODIN recognized the Vibrant in order to start the process, but it has not recognize the device. I thought I had all drivers installed, and I would appreciate any help.
The device is recognized when I have it in the Recovery mode, but not in download mode.
Odin is super finicky but this process usually works. Plug your phone into your usb port while it's still off. Bring up odin but don't put the files you want in it yet. Now boot your phone into download mode. After the com port comes up in odin load the files into thier proper fields and install. Hope that helps.
Sent from my SGH-T959 using XDA App
if you can get to clockwork recovery, you can mount your phone to your computer (the option that says USB, like the 2nd or 3rd option). You could then move a rom with kernel to your phone and flash it.
I think your problem is you were trying to go from 2.2 to 2.1 (nandroids do not restore the kernel, hence it will hang at the Vibrant screen). Perhaps you have voodoo or another lag fix and didnt disable it?
Also, my noob version in my signature show the proper steps for ODIN, and has a video.
Thank you the process work. I had Windows running on Parallels and it messed everything up. Had to reboot only with Windows though. i just resetted everything until I become more familiar with the process.
i picked it up used with stock rom, no mods. i rooted, then installed nero v3 with voodoo and then v5 with voodoo.... then i tried a custom battery mod and it screwed my phone up... cant get past the vibrant start screen, cant read the ext sd and the phone drivers will not work... computer detects it, but no drivers are installed. i have used the 32 bit driver 64 bit drivers, kies, kies mini, odin v1 and v1.7, still nothing... i can get into cwm recovery, but only with voodoo enabled, and can get into download mode, but i cant seem to get the computer to read it. have used 4 different computer, win 7 and 32 bit xp....also have tried drivers with pdanet and easy tether, but still no luck... can you offer any help to me??? thanks in advance.
as of u have done so much and nothing helped i would cry , and for not readin on how to unbrick your phone right on top of the forum you should cry too .
and if look good enough every 3rd thread that is made is how to unbrick the phone
@bartek
OK...OMG dude... you had like 5 posts 3 days ago...how are you helping this individual out other then giving him all your illegible ramblings that you are posting and ridiculing individuals as you go .. I'm sry, I don't mean to rant but damn...
Anyway OP, your just soft bricked. If you can get into d/l mode then I would either go ahead and ODIN back or if you can get into CWM recovery and you still have Nero 5 in your root, I would just reflash it and it should take care of it...enable voodoo when you flash Nero 5 ..you should be ok.
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
bouzouki said:
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I would say Odin is your friend. go back to stock and start over Here is a start
http://www.youtube.com/watch?v=KyAIUOYufrU
Part 2: http://www.youtube.com/watch?v=33I-aNCypVM
hope this helps you
no dont throw the phoine out give it to mee ! or u can just remove your battery while phone is hooked up to computer with usb push volume up and volume down hold it put battery in , yellow android showed up ? u good to odin if he didnt redo repeat those steps until u will see him
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
onc3 again
1. phone connected to computer
2.odin open
3.take out battery (out of your phone)
4.hold volume up volume down (allthe time)
5.put battery back in
6. put files in odin flash back
bouzouki said:
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
Click to expand...
Click to collapse
I gotcha.... not to sound like an idiot but have you tried a different usb port? If your using one on the front, try ones in the back if your on a desktop.. if that doesnt work try running ODIN in XP SP3 compatibility mode
bartek25 said:
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
Click to expand...
Click to collapse
I think he's saying that odin doesn't detect his phone and therefore doesn't light up yellow. Happened to me too. I'm on the epic. I tried everything. But odin finally found my device. Try different usb ports, a different wire, reboot both phone and pc. Switch between usb debugging on and off. Try it with sideloading enabled and not. I eventually found a combimation that worked. These phones are fickle. It'll work eventually.
Sent from my SPH-D700 using XDA App
+1 on what he said above try connectin and disconection your phone lots of times 2 forgot it happend to me too once .sorry it was a while ago
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
As far as I know, ODIN wont recognize your phone without being in download mode and drivers installed on your computer.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
No I believe you need the correct drivers installed. At this point either your missing something or don't have the correct driver to install. Maybe someone can point out where all the proper drives are for you to download
speachless ....if u wont follow what i wrote im helpless.goodbye. and why u turning your phone on dude download mode is battery out phone connected to ANY usb port hold vol up vol down hold all time and puit battery in
if that doesent help your phones usb is **** or the cable is ****
btw, i have tried installing all the proper driver from the proper threads... 32 bit, 64 bit, ive tried kies and kies mini for vibrant, heimdall drivers also.... NOTHING WORKS...
i appreciate everones help... thank you.
This is what I do to get it working. I open odin first and load all the needed files.
I then plug the usb cord into the usb first before plugging it into the phone.
with odin open and the phone completely off. I hold down the volume rocker and plug in the usb. I get download mode to work almost everytime.
For me the stock cable I got with mine doesnt work. I have to use a different cord or it acts like it doesnt see my phone.
How do I take my Vibrant that has Bionix on it and return it to factory set, as in when i got it in the box? The whole ODIN isn't working for me. I have the drivers installed on my comp, but when i turn the phone off, it doesn't recognize it. :/
Just find a stock flashable file and flash it through clockwork
U can either keep trying cuz odins a ***** sometimes or try heimdall. I gotta try 5 to 6 times for my laptop to recognize my phone and its drivers. Personally ive never used heimdall but heard its more consistant than odin
Currently running ______________! (<----Insert Rom Name Here)
I can't seem to find one. :/
I would need the stock kernel either?
I have been searching for days.
What do you mean when you turn the phone off? It has to be in download mode in order for it to work, and of that's what you meant and its not being recognized by windows then let me know. I can help you with that.
Sent from my SGH-T959V using Tapatalk
I turn it off to enter download mode (Sorry if i was a bit unclear) I have installed the drivers and it hasn't worked. :/
You doing this on windows? And is it safe to assume you have all the files you need for Odin already? (tar and pit files)
Correct, I followed the guide that was posted and it didn't recognize the fact that I was in download mode on odin. It said that it completed 0/0 threads.
Reboot machine
Right click the Odin shortcut and "run as administrator"
Plug the USB cord into the computer
Remove the battery from your phone, and then plug the USB cord into the phone.
Put the battery back into the phone, and you should then be in download mode.
Those steps worked for me bc like you I was having huge issues getting my pc to recognize the phone. Let me know if that doesnt work.
Also, make sure your Windows Device Manager doesnt have an issue with your phone. Once you open it, it should jump out at you if you do.
If odin isn't working for you, you could use the alternative, Heimdall. The vibrant bible tells you all you need to know. good luck.
ok guys, first things first. YES i did search, i read threads for hours. So if your just gonna come to bash on me... get off it.
So i had a bad flash, oh no. Phone was stuck in a bootloop, got it to download mode and put it thru odin. Well odin said FAILED. now i can still get into DL mode but its no longer a bootloop, now its a lil picture of a phone linked to a computer when i turn it on.
SO heres the prob, i can get into DL mode, but odin refuses to recognize my phone. Ive tried other usb ports, other cords, unistalled and reinstalled odin and the drivers. USB debugging is off says aio toolbox. So what do i do now? any suggestions im not thinking of?
Any help is greatly appreciated and will b thanked. =)
Phone to PC screen still should be able to flash through.
Have you tried a different computer? One that your phone has never been in contact with?
What was the FAILED error when you tried to ODIN initially?
Can you get into recovery by chance?
i have tried a different computer, but not one it has never been on b4.
And toast, i actually dont know if i can get into recovery. Im about to look up how and try that
WhiteBoyAwesome said:
i have tried a different computer, but not one it has never been on b4.
And toast, i actually dont know if i can get into recovery. Im about to look up how and try that
Click to expand...
Click to collapse
Gingerbread bootloader uses this combo:
For Recovery - Lower Volume Key + Power Button
For Download - Upper Volume Key + Power Button
If you have Froyo bootloader:
For Recovery - Both Volume Keys + Power Button
For Download - Both Volume Keys and Connect USB Cable
alright, i can use the hardware buttons to get into download just fine. But when i try to get into recovery it only gives me the Phone -- ! -- Computer icon. ITs getting annoying lol
Ok. I didn't figure that would work, but it wasn't going to hurt anything to try do you have any friends with Macs? You could try it on one of them with Heimdall. That would be another option to try.
Also, check out this thread: http://forum.xda-developers.com/showthread.php?p=8149503
Read all the posts, there is some good stuff in there.
+1 on recommended thread. It sounds just like your issue. Definitely try the Heimdall AIO one click t959 for Windows.
sent from the depths of helly bean
nothin yet :/
Google eugenes froyo that does not brick, read the op carefully, because after you odin the tar file, you will have an error message, thats ok, odin eclair and you should pass.
Read it 10 times, you'll reboot in cwm with an error message, ok, reboot, download, eclair.
stupid question sorry, but do you have sdk platform tools installed?
im not sure. i downloaded something called sdk manager, but it closes the moment u open it.
SDK platform tools is a large program, But if your computer has recognized your phone up till now, you probly have the right drivers, by the way have you cleaned your usb port? toothbrush and an electronics cleaner or alcohol very lightly, never know.
ok guys. heres the update. I tried all the links you guys have kindly tossed my way. nothin. Im on a different computer even and downloaded the drivers, odin, toolbox, etc. The phone still isnt recognized. I Have no clue why, is the reason cause usb debugging is off? the only 2 screens i can get to r download and phone ! computer. Am i bricked for good??? =(
WhiteBoyAwesome said:
ok guys. heres the update. I tried all the links you guys have kindly tossed my way. nothin. Im on a different computer even and downloaded the drivers, odin, toolbox, etc. The phone still isnt recognized. I Have no clue why, is the reason cause usb debugging is off? the only 2 screens i can get to r download and phone ! computer. Am i bricked for good??? =(
Click to expand...
Click to collapse
You are putting your phone into download mode before using odin right? You must have your phone in download mode for odin to recognize it. I'm guessing you have done this but I wasn't sure after reading through this thread, hope you get up and running again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
You are putting your phone into download mode before using odin right? You must have your phone in download mode for odin to recognize it. I'm guessing you have done this but I wasn't sure after reading through this thread, hope you get up and running again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
yep. tried multiple combos as well
Hey I think you should follow this..
1. Connect your phone with computer without battery
2. Press volume down and power button simantaniously for getting download mod
3. After 30 or 60 second pull back battery into phon with holding buttons
4. Odin ditect your device almost surely...
Thanks..
Sent from my GT-I5510 using xda premium
Ok, I just went through this over the past weekend with a spare Vibe that I have. Odin would not recognize it at all for my. I would here the Ding and then nothing. No yellow COM box, no driver installation, nothing.
Here is what I did:
First I went into Device Manager and with the phone plugged in (needs to be plugged in so you can see the yellow!), I uninstalled everything with Samsung's name tagged to it (including my SGS3 and SGS2 drivers).
Then I went here and downloaded and installed Heimdall (take note that you have to make sure that libusb-1.0 is correctly installed). There is an exe file in there (might be in the Heimdall thread here in the Vibe section), that allows you to update the drivers. That is where you would replace the Windows with libusb-1.0.
Then I plugged in my USB to PC and to phone and put it in Download mode. Nothing. So I left it plugged into the phone still but unplugged from PC and move ports. I have 3 ports and believe it or not, the one farthest from the power source/MB was the one that work. As soon as I plugged it in, I heard the Ding and saw the box pull up auto-installing the drivers.
After that, I went to Utilities in Heimdall to make sure detected. It was and I flashed Mr_Psycho's package (no pun intended ) via the normal Heimdall instructions.
Believe me, I have spent a ton of time on this and troubleshooted everything from dead USB to dead motherboard. It was a real PITA.
Edit:: If you need any of the files, Heimdall version or Drivers, just PM me and I will send them to you. You are not Bricked, just your PC's vision is clouded a bit.
woodrube i greatly appreciate the mass amount of help. i will try all the above as soon as im home and report back to u
alright, i deleted everything, reinstalled, tried heimdall still nothing. I am in download mode but laptop wont recognize anything. it says the correct drivers are installed but then says usb device not recognized, this is killing me as i need my phone imma post a video tonight of what im doing, hopefully someone sees im doing something wrong