Hello friends,
I have a big question for ya. I think Novembre5 may have tried this, I have searched all over this forum but I cannot find the answer. I am going to convert the Japanese T01a Docomo ROM to .tsw, then I am going to use Cedesmith's tool again and change the radio of the UK ROM to Docomo's radio. Then I am going to flash it.
I do understand that after I do this, I will not be able to change the radio again , however, it doesn't matter to me. What does matter is if my phone will start acting properly. I recently changed the radio to the German O2 5001.0102.76 radio and it is acting much better, less reboots after the splash screen, however, it still happens. I have searched all over all of XDA-Developers and have come to the conclusion that the radio must be the problem as many, many people state the same problem as I am having, freezing after the Windows splash screen on boot after changing the radio. Basically I am convinced that Japan does something special with the radio and the TG01 to make it fully completely compatible with the Japanese carriers. I also think that little errors like SD Card having issues with loading icons continue to occur on my phone because I have the wrong radio. I know it is a long shot with the SD card thing, but I truly believe it to be the case.
Anyways, I understand that I cannot change the radio once I flash it with the Docomo radio, what I don't fully understand is...
1. Does the Japanese radio SIM lock your phone? Or does it just radio-lock your phone?
2. I am with the Japanese provider Softbank, so if I use the Docomo radio will I not be able to use a Softbank SIM anymore?
3. If it SIM locks my phone, I already know the SIM unlock code, do I just put it in again and then it is unlocked?
4. Does anyone know if there is a Japanese Softbank X02T (TG01, T01a) ROM available, I mean, obviously, I am with Softbank, this would be the more correct path to go down?
HELP ME, お願い致します(that means thank-you and please all in one in Japanese-o language, super polite!, ehheeh, I am studying Kanji now)!!!
-Kiliconfuzed.
Email from Novembre5!
Novembre5 said:
Hello.
When I tried flashing the Japenese radio to my TG01 the phone would not boot up anymore. It almost bricked the phone as nothing was working. After some help from cedesmith I was able to get my phone back up and running. Please stay away from any radios not for the TG01. Also, the wrong radio relocked my sim and I had to purchase another unlock code to reunlock it. I hope this helps.
Take care,
Novembre5
Click to expand...
Click to collapse
This is from an email Novembre5 just sent me, well, I guess we have the answer. Ok, I will just keep on flashing until I get the radio right.
What about the other way around, what if I flash a Japanese Softbank X01T (TG01) into English, now I live in Japan, so I don't mind if the radio stays the same... I also don't need it unlocked because my provider is Softbank, is that possible?
-Kili
Related
Hy guys,
I have a post Dec.2 x01HT and have the following problem. I have bought the imei-check unlocker when it came out and used it. Originally it worked, I tried it with a DOCOMO SIM and everything was nice, but when I tried a GSM SIM it still said simlock....
I e-mailed imei-check and they said I have to do the unlock during a hard reset before the softbank settings screen and that is what I did. After that my device worked with a GSM Sim, but I had a ton of problems: the windows hangs every few hours and I have to reset the set, also I cannot get the hold-down vibrate function of the radio button to work, the reaction time of the touch screen is very slow etc.
I also noticed that if I hard-reset without using the imei-check unlocker after the settings procedures there is an auto customization procedure that runs and customizes the phone to the softbank settings and looks, but if I do the hard reset and unlock with imei-chek this procedure doesn't run and I suspect that is part of the reasons for all the problems.
I was wondering if anyone has experienced similar problem and can help me solve this problem?
I was also wondering if I run the free unlocker on my device will it work better?
P.S. I am using the original Softbank ROM with the English MUI by Asukal.
kalintri said:
Hy guys,
I have a post Dec.2 x01HT and have the following problem. I have bought the imei-check unlocker when it came out and used it. Originally it worked, I tried it with a DOCOMO SIM and everything was nice, but when I tried a GSM SIM it still said simlock....
I e-mailed imei-check and they said I have to do the unlock during a hard reset before the softbank settings screen and that is what I did. After that my device worked with a GSM Sim, but I had a ton of problems: the windows hangs every few hours and I have to reset the set, also I cannot get the hold-down vibrate function of the radio button to work, the reaction time of the touch screen is very slow etc.
I also noticed that if I hard-reset without using the imei-check unlocker after the settings procedures there is an auto customization procedure that runs and customizes the phone to the softbank settings and looks, but if I do the hard reset and unlock with imei-chek this procedure doesn't run and I suspect that is part of the reasons for all the problems.
I was wondering if anyone has experienced similar problem and can help me solve this problem?
I was also wondering if I run the free unlocker on my device will it work better?
P.S. I am using the original Softbank ROM with the English MUI by Asukal.
Click to expand...
Click to collapse
You can still do the customization manually. There is only one file that you aren't supposed to run. Just unlock your EXT-ROM and install the cabs one by one. Pof has a Softbank extended rom with the bad file removed around here somewhere. In any case the "fix" cabs are all over the place and you probably don't even need to run the softbank stuff if you don't want to.
Thanks,
I am not too much into these things. Originally all I wanted was to SIM unlock my set, but I will try to find how to do all the things you said...to unlock the EXt-ROM and install the cabs myself.
Can anyone tell which cab exactly I should NOT install?
I have downloaded the Softbank Extended ROM from here, but it seems to have even more cabs than in my original ExtRom on the device. I would appreciate a list of which cabs to install or not to install.
Thank You all
So how does this IMEI unlock could work?
Hi everyone,my name's Larry and I just registered to the forums. Please forgive my newness but I am in a bit of a pickle here.
I have a MDA Vario II, aka Hermes 300, that I bought s/h off ebay. Works fine,no worries, but I upgraded to WM6 because i felt browsing was a little slow and the screen graphics werent as good as I expected. The upgrade was from the T-mobile site itself and all went fine. Only thing is I dont believe this phone can handle it(needs more RAM really) and after being online a while it gets really slow,like steerig a cow through treacle at times so I came to the conclusiong it was a bad move! Now I've noticed a link on here about downgrading to WM5 but is it that easy for one with no specialised tools or knowledge(tho i did build my own PC, or should I say ahem WE did)
Also a problem the phone has developed since the upgrade is it keep deleting my email settings, even tho on the 'desktop' screen it tells me i have so many unread emails in each account! So now i cant check emails from it either!
I do hope I can sort this out cos it is really frustrating having a PDA and not being able to browse properly!
Many thanks
Larry
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
scousemartin said:
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
Click to expand...
Click to collapse
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Hermes300 said:
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Click to expand...
Click to collapse
all your question answered here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I have looked thru the wiki and cannot find the advice I need.
My device has the following on it and what I would like to know is if I can actually drowngrade the device back to WM5.
The rom version is 3.60.110.4 (T-mobile UK)
The radio version is 1.50.00.00 so I assume that it is boot 0108.
The IPL is 1.04 and the SPL 2.03.
The protocol reads as follows 32.83.7020.20H
I have come across a guide that states if the radio is above 1.27.00.00 then downgrading may not be possible.
"(NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.)" -http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
The other question I would like to ask is this - it is possible to put another verion of WM6 on with this radio version?
Thanks for any advice!
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Hermes300 said:
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Click to expand...
Click to collapse
I think you might not have gotten help 'cause it doesn't look like you've read what people pointed for you to read. Hopefully this'll help you get over the jargon hump and make progress. Having upgraded from the Offical T-Moble rom and swapped ROMs, it's definitely worth taking the time to learn how to do.
SIM unlock & CID unlock aren't the same.
If you've had you phone with T-Mobile for at least 3 month they will let Unlock you SIM (at least they do in the US). Contact them directly, you'll need an active account & phone number with them. This is free.
CID unlocking allows flashing ROMs onto your PDA. For some reason the folks at T-mobile, etc want you to have to look at their stuff every time you use a machine you bought through them. Using a cooked rom is like reinstalling XP without having AOL on your computer, makes life much better.
(flashing = installing to a PDA's Read Only Memory)
(ROM = OS + Radio + other stuff = basically everything thats on the PDA after a hard reset)
Flashing can be a dangerous thing, you don't want to 'brick' your PDA so you install an escape hatch. Hard SPL is that escape hatch.
(Brick = peice of baked clay = your PDA if a ROM install fails and you didn't install Hard SPL first)
The Hard SPL protects you if the ROM you installs fails 'cause power went out, ROM was bad, you bumped the cable, etc
http://forum.xda-developers.com/showthread.php?t=296722
Read & Follow the directions.
Select a ROM from here
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I have the same model & just installed Custel V2.5, seems to work well so far (day 2).
http://forum.xda-developers.com/showthread.php?t=364617
Good Luck
Thanks gt, and we have read advice on here but a lot of seems to be conflicting plus we seem to be just going round and round. Yep, ben there, yep read that etc.
I know the diff. between SIM and CID unlock but all I want to know is is it necessary to SIM unlock the phone to update a ROM?
I wont be using another network but will be staying with T-mobile W n W.
I did it!
Well I did it. flashed the phone with Schaps WM6 4.30 WWE.
Have noticed it runs faster than the previous T-Mobile WM6 and has some really neat features-you can adjust a lot more settings on the phone than before,quite impresed! Thanks for everyones help!
Hi,
I purchased the Softbank X01HT (post Dec) in Japan when i was working in Japan. I lived with the Japanese OS even though i don't understand Japanese because I didn't want to temper with it just incase something goes wrong and i can't use the phone. Well, now im back in Australia ... and i need to unlock it and flash a new ROM to it so that I can use it in Australia .. otherwise.. it is effectively a brick....
so.. i spent the past two days reading all the valuable information u guys provided... and in the end.. i decided to first unlock and superCID my phone using the AUTO_Unlock_v3a.bat provided by POF ... and then flash it with the Jasjam telstra ROM (RUU_Hermes_DL_UK_3[1].62.305.5_6275_1.54.30.10_108_Ship.exe) also found in this forum which received good feedbacks...
ok... after i executed the AUTO_Unlock_v3a.bat program .. everything went well... and at the end of it.. the screen even said.. successful in both unlock and superCID ... so.. i assumed that my phone is unlocked...
then... i went to flash my phone with the abovementioned jasjam ROM .. and this too.. everything went just fine ... and now.. my phone is working with this new ROM (cool! first time im able to read my x01ht coz its in English) ...
without a sim.. the OS works fine.. etc etc...
however, when i tried to put a telstra sim card in it ... its still simlocked ...
the SimLock screen comes up and requests me to input unlock code ...
so.. i did more reading and researched but can't find any solution to this ... i even tried that "unlock" code (22051978) but it doesnt work ...
Please.. can someone help me with this issue with my phone? now.. it seems that i just need to unlock my phone to use it as my jasjam ROM is working fine. Below are further details:
ROM version: 3.62.305.5
ROM date: 11/06/07
Radio version: 1.54.30.10
EtRom version: 3.62.305.116
any help/comments will be highly appreciated... thanks in advance...!
read somewhere that if you let the softbank go through the 1st boot and it installs all the extra stuff you wont EVER be able to unlock it again. some one else may need to clarify this but apparently you need to soft reset after you've reached the today screen but before the customisations start. if you didnt do this then you probably wont be able to unlock it. sorry if this is wrong/bad news.
Hope someone else can corroborate this.. cheers...
thanks for your reply ultramag69 although i hope that u r wrong.. hahaha
fingers crossed ... hopefully.. positive news from some experts ...
After re-reading the posts, i cannot find that I did anything wrong.
This link "http://forum.xda-developers.com/showthread.php?t=293665" states that the unlocker v3a "can be used in all HTC Hermes devices, no matter which bootloader version the device is running", with the exception of "x01ht post April devices" (i.e., white x01ht).
However, my x01ht is black and is a pre-April device.
So, I am still not sure what is wrong. Please help please help any experts out there ...
POF ... if you are there.. please help ... i need your expert advice thank you in advance.
ultramag69, i think that you are referring to this "http://forum.xda-developers.com/showthread.php?t=301952".
Quote:
"Here's how to unlock the new batch of SoftBank X01HT devices with radio 1.14.01.10.
This process is ONLY valid for new devices which have never turned on or let the SoftBank Extended ROM install.
If you have already let the ExtROM install you CAN'T sim-unlock it."
Fortunately, i find that this does not apply to me because my phone is not post april. Also, originally, my radio was never 1.14.01.10. It was 1.14.00.10.
help..........
snowboarder said:
Hi,
I purchased the Softbank X01HT (post Dec) in Japan when i was working in Japan. I lived with the Japanese OS even though i don't understand Japanese because I didn't want to temper with it just incase something goes wrong and i can't use the phone. Well, now im back in Australia ... and i need to unlock it and flash a new ROM to it so that I can use it in Australia .. otherwise.. it is effectively a brick....
so.. i spent the past two days reading all the valuable information u guys provided... and in the end.. i decided to first unlock and superCID my phone using the AUTO_Unlock_v3a.bat provided by POF ... and then flash it with the Jasjam telstra ROM (RUU_Hermes_DL_UK_3[1].62.305.5_6275_1.54.30.10_108_Ship.exe) also found in this forum which received good feedbacks...
ok... after i executed the AUTO_Unlock_v3a.bat program .. everything went well... and at the end of it.. the screen even said.. successful in both unlock and superCID ... so.. i assumed that my phone is unlocked...
then... i went to flash my phone with the abovementioned jasjam ROM .. and this too.. everything went just fine ... and now.. my phone is working with this new ROM (cool! first time im able to read my x01ht coz its in English) ...
without a sim.. the OS works fine.. etc etc...
however, when i tried to put a telstra sim card in it ... its still simlocked ...
the SimLock screen comes up and requests me to input unlock code ...
so.. i did more reading and researched but can't find any solution to this ... i even tried that "unlock" code (22051978) but it doesnt work ...
Please.. can someone help me with this issue with my phone? now.. it seems that i just need to unlock my phone to use it as my jasjam ROM is working fine. Below are further details:
ROM version: 3.62.305.5
ROM date: 11/06/07
Radio version: 1.54.30.10
EtRom version: 3.62.305.116
any help/comments will be highly appreciated... thanks in advance...!
Click to expand...
Click to collapse
hey bro!when you r already flashed v3a unlock,than you should down a software name like "Hard-SPL-V7",it will help you to unlock the exrom,make you able to flash the new os\rom...
"HARD-SPL-V7" has 2 software,1st is "RUU_signed.nbh",2nd is "RUUWrapper.exe".
devileric, read post carefully. snowboarder has no problem with reflashing oses, its the sim that needs unlocking now and hard spl WONT do that...
Still reading and researching. I'd probably retry the unlock tool. it cant hurt but may work... cheers
devileric ... yes ... ultramag69 is correct ... my new English Telstra Jasjam OS works like a beauty when it operates WITHOUT a sim card. However, when i try to insert a telstra (or optus) sim card in there, there is a prompt that requires me to enter a unlock code. Please note that the unlock code 22051978 does NOT work in this case (also doesnt work in alot of other cases that i read in this forum).
Ultramag69, thank you for your help and replies, much appreciated. I actually did try the unlocking program again (three times ) . However, when i execute the AUTO_Unlock_v3a.bat when my OS is the new telstra jasjam OS, my phone will freeze on the telstra startup screen after the radio update step of the unlocking program when it automatically resets. Thereafter, even when i perform soft reset again and again, it will just freeze there. When that happened the first time, I thought that I bricked my phone .. ahhaha.. but fortunately, I was able to simply go to the tri-color boot screen and then simply flash the above said telstra Jasjam ROM. This will get me back to square one, i.e., working Jasjam OS, but phone is still sim locked.
I spent another night last night reading the applicable threads. I find that quite afew other people had the same problem as me. And I also find that whenever such problem is posted, its either ignored or a moot reply is given.
So, for the experts out there, if there is a solution to this, please kindly let me know. I am sure it will others will find it helpful too. Thank you.
Sorry wrong post
Hi.
I tried to find this on the forum and wiki, but i couldn't, so i want to ask.
I got a used Softbank X01HT, and seller said it was unlocked, but when i put in my sim i can do things for about 30 seconds, and then there comes a U-SIM screen and it asks me to enter something, i guess ( It's in japanese ).
How can i get this to go away? Is it even unlocked?
ROM: 1.33.761.4
Radio: 1.16.00.00
When i make call to phone i does to through and people can all even though U-SIM screen is there, and when people call, it is possible to go to the menues and such.. But when they hang up it goes back to U-SIM screen.
Please help
I have already read the Post april X01HT thread, though it is not relevant in this case because this is model from 2006.
Thank you
this is SIM unlocked phone (radio version 1.16.00), but your Windows Mobile ROM is the original SoftBank Japanese version that enforces USIM message...
You can flash to some other Windows Mobile ROM, but make sure you check Hard-SPL thread first (sticky in Hermes upgrading etc)
Hi thank you again!
I read something like that in the SIM unlock thread.
So i just need to install Hard-SPL and then flash a ROM?
Do i also need to do CID unlock? (http://forum.xda-developers.com/showthread.php?t=293665)
I would like to be able to write japanese with the phone, so is that possible if i flash? I saw a thread about installing japanese input/output support, is that possible to install on every rom?
And can you reccomend a rom or post link to ROM you think i should install?
THANK YOU! can't wait to start using it.
Now i just tried the Hard-SPL thing. But i get Update error 260 saying my device is not connected. I have ActiveSync 4.5 open and i have synced..
so i don't know.
I don't know if it has anything to do with the USIM screen being on all the time?
I see Active sync closing down as soon as it starts updating.. but then it can't update, right?
easiest way is to use SoftBank SIM for flashing everything, that way you avoid USIM message...
if you dont have SoftBank SIM available, search for welcome.exe on this forum.
SoftBank put a software SimLock in the ROM which can be removed with welcome.exe from imei-check unlocker. (http://www.imei-check.co.uk/m3100unlock.php) Start it up with you phone connected to USB and ActiveSync enabled... After the program asks for some password file, just close it! (close dos prompt window)
About Japanese IME (kanji & kanna input), i prefer flashing some newer English WM6 ROM + installing separate Japanese IME from cab. Old SoftBank's ROM is very slow and limited...
Super CID is just there if you flash HardSPL....
HI, thank you!
I found out that the USIM screen goes away if you just press on the signal bar and say that you don't want to receive signal.. den i can ue it.. And then i could do the Hard-SPL which i did with no problem. thank you!
Ah so if i just download that program and close it down at that time the USIM screen with never come again?
Yea i want to flash it to newer. But i'm not sure which one because i've heard a lot of people broken their phone :/
could to give me a link to a few "good" English WM6 ones?, though i there is probablt many.
i will try out the imei-check thing now ^_^!
Once you flash HardSPL; when you want to flash only Windows Mobile ROM only you dont have to worry about bricking (destroying) your phone. Only flashing different radio could be dangerous.
For the version, you have to find out yourself, there are so many... Check Hermes Mobile 6 threads, there are even some special Japanese cooked ROMs if i remember correctly. Also check user signatures for what versions are different people using...
thanks so much! i managed to get the USIM screen gone with your help.
Ahh i see, but install new version wont it also change the radio? wasn't that dangerous?(sorry if i ask dumb question)
so if i chose this for example: http://forum.xda-developers.com/showthread.php?t=359458 i can still make it with Japanese IME?
i think i will try hehe!
that link you provided is Schap's WM6 Pro 4.31 ROM... It is one of the most stable out in the wild, and it comes without radio, so flashing that one should be safe.
Oh ok thank you! then i will try this.
Last question before i do anything
This that ROM it is still possible to do the Japanese IME thing?
I found this thread
http://forum.xda-developers.com/showthread.php?t=298919
It explains something of getting japanese on phone, was this what you meant by japanese IME? or is there an other method, if yes, please telle me/ give link.
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
THANK YOU!
That solution you mention should work fine, but newer solution is available. Check http://forum.xda-developers.com/showthread.php?t=445550
Hi! THank you very much! i was finally able to flash the ROM!!
And i have installed the Japanese fonts and Input thing!
It works. but after install i can not sign onto MSN Live Messenger. Is there anyway to fix this problem?Maybe i should change something in Regedit?? Or should i uninstall the fonts again? :/
It gives me this message: There's a Connectivity problem. Make sure you're in an area with good reception and try again.
I have tried over and over and WIFI is up and working..
So any answer i would be so greatful and finally be able to use the phone like i dreamed of !
Thank you.
sorry, i dont use msn, i have no clue about it...
明けましておめでとう。
Ok thank you anyway!!
明けましておめでとう〜
良い年でありますように♪o(^-^)o
Well,
recently I've bought 8525.
But I live outside US so i needed to unlock my device.
I've downloaded "HTC_Hermes_SIM_CID_Unlock_v3a"
and have flashed my 8525 using an microSD card.
Everything went OK, then after flashing I've launched unlocker .exe. on my device and ulocked SIM and CID.
Then I've placed my SIM-card but it won't search for any network (It continues to search and search.
What should I do in this matter?
I'm running MS Vista, so I'd be glad if U suggest me to flash using an micriSD card.
Thanks.
Please help me to get out of this case.
Edit:
I've just flashed radio 1.54.30.10 using SPL 1.40 Olipro, IPL 1.1
with no luck at all.
Help me somebody.
Still searchs and searchs network, but doesn't register on network.
Same problem (NO GSM) I'm Vietnam !
I Have same problem ! now i flashed SPL-2.10.olipro and try again with Unlock v3.exe but not progress !And i check my phone at Device Infor i cannot see IMEI (IMEI: [Emty])
AT&T 8525
I have same problem no radio no gsm no imei, try everything still same result. Can anybody help.
ONLY thing to try is to either install ORIGINAL SHIPPED STOCK ROM or the ORIGINAL SHIPPED RADIO ROM. Doing anything else may permanently brick your device. This is not guaranteed to work as the radio rom is a cantankerous SOB and seems to be the achilles heel of the Hermes. In laymen's terms, radio dead, not recoverable in most cases...
Good luck...
I'm not saying its impossible but then I believe if you jump off a cliff and try REALLY hard you might actually miss the ground...