i was flashing a new rom on my hd2. i used "active sync," started through the flashing process and the phone came to the all black HTC screen with the status bar but it did not finish to 100%. it got to 40% and froze, then the wizard took me through a recovery process. my phone is stuck on the red green blue and white screen displaying: " ss-b3 spl-2.08 . hspl 8g xe 0x05 0x50 cotullahspl. what do i do from here?
Start from scratch download and Run Task29 this will remove any left over bits from the previous install
Install a HSPL not SPL
Install a compatible Radio for the Rom you want to install
then install your ROM
I am also new with all this stuff but doing the above worked for me For more info check out all the Rom install instruction videos on youtube
Related
Dear All,
I just get an HD2 from my cousin...
As it was an old device, I wanted to flash the rom...
It was suppose to be an orange one so I got the last fr orange rom from the htc website
I launch the flashing process and at 92% I got an error because the image was corrupted, I tried others htc roms but it remains locked at the beginning
with the Red Green Blue White Stripes....
"Security Unlocked RUUNBH
PB81100 MFG
SPL-0.67.1000 XD
MicroP(LED) 0x02
MicroP(TOUCH) 0x20
Upgrade ROM code error
Please try again"
What can I do?
Thanks for your assistance...
try to download Task29
Run the program, it whipes your phone to blank
then run the rom update again
Task29 working with a device without hardslp?
Anyone ???
Please
you need hspl on your phone. enter bootloader and then connect via usb. run hspl program (it will work). then flash a new rom.
hspl didn't work... Unknown error, code 0x200006
My HD2 was repaired. Board/IC changed and also new screen.
But the guy said software needs to be installed. The screen was stuck on the first white screen with "htc".
I tried installing custom ROMS, HSPL etc but it got stuck with triangle and exclamation mark. I read lot of forums and realized I need to flash with stock rom using SD card. I downloaded the below stock/ship ROM from HTC site did the same with SD card flash and everything went successfully.
RUU_Leo_hTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.
Now after I did hard reset and restarted the phone it is again back to the same white screen with "htc".
Following is displayed in bootloader
PB81100 HX-BC
SPL - 1.42.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Can someone please help with step by step guide on how can I recover my HD2?
i was flashing a new rom on my hd2. i used "active sync," started through the flashing process and the phone came to the all black HTC screen with the status bar but it did not finish to 100%. it got to 40% and froze, then the wizard took me through a recovery process. my phone is stuck on the red green blue and white screen displaying: " ss-b3 spl-2.08 . hspl 8g xe 0x05 0x50 cotullahspl. what do i do from here?
model id is corrupted. you can try flashing stock from sd card, but i suspect you may be now stuck.
HI guys
Last week I received one hd2 tmobile-us from my friend. He got stuck when he was trying to install android.
Currently he's stuck at the t-mobile screen, so I tried to do the power+volume down key and here's the result:
Security Unlocked
--------------------------
PB81*** SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x50
MicroP(TOUCH) 0x50
I'm aware that this is the new fone with spl3.03 on it. So here what I tried:
I tried to use hspl4 and install spl2.08 instead of 3.03 on it, and hspl gives me a error (code 0000000D)
I tried to download a old stock rom (LEO_RUU_1_5_TMOUS_2.10.531.0_Radio_2.08.50) and copy to the SD-CARd (8g), but it stuck at the white screen with the "loading...." text
I tried to install the rom by the bootscreen, does not work.
I tried to install MAGLD on spl3.03 anyway, and as expected, it did not work.
I myself do have another hd2 that's running android NAND on it, and I already spent 3 days searching the forum but I can find any answer on my problem. I'm running out of option and dont know what to do next.
Please help
ps: I forgot to click on the "is this a question thread", but I think it's a question thread
i have HTC HD2(made in china)
when i press power On Button then show( software update failed please try again)
when i turn on it on flashing mode in color (red greeen blue and white) then it shows.
PB81100 SS-BC
SPL-2.08.0000 8g XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
what i have to do now please help.
depends what you want to do. looks to me as if it has been flashed from sd with a tmous stock rom, which has loaded 2.08.0000 which has then said 'this isn't a tmous' and given your error.
lets say you want to move to android
into bootloader
hspl4 --> 2.08.hspl (not 2.08.0000)
bootloader
flash magldr
magldr menu - usb flasher
use nand toolkit to set system partition size
magldr menu - 8 ad recovery
instal zip from sd card - choose zip - point it at whatever android rom you want to instal (zip on your sd card)
done/
also, you posted in the wrong section, prepare to be lambasted.
Please help again
i can change only hspl only as per below.
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
i want window 6.5 only not any thing . please help........
serial # is SH08PNW01126
made in china.
please help....
get any 3.14 winmo 6.5 rom.
put phone in bootloader, connect usb lead.
run hspl4
in the dropdown choose 3.03.hspl
when phone reboots, go again into bootloader
run the 3.14 rom.exe installaler.
done.
please help...
Thanks my dear for help me
but now i am facing a different problem .
my dear i have done it.
run into boot loader
run SPL4 and from filter SPL3.00 HSPL
Restrat
again start into boot loader
RUN ( ROM Upgrade for HTC HD2 (O2 UK 3.14.206.1)
it didn't completed.
got error
now turn off and didn't getting ON.
where is the fault.????????
please help.
At what % did you get error?
Explain how it won't boot, no power? Suck on boot screen? Can you enter Bootloader?
please help
1st when is going on into boot loader then during updating ROM it has stop at 8%.
after it got OFF and still not showing any thing. even i checked battery voltage . voltages are ok but leo not ok...
but from couple of days its not showing charging ' not showing any thing , even its not showing ( software update failed)
not entering in boot loader.
and not showing any thing on original charger.