My HD2 was repaired. Board/IC changed and also new screen.
But the guy said software needs to be installed. The screen was stuck on the first white screen with "htc".
I tried installing custom ROMS, HSPL etc but it got stuck with triangle and exclamation mark. I read lot of forums and realized I need to flash with stock rom using SD card. I downloaded the below stock/ship ROM from HTC site did the same with SD card flash and everything went successfully.
RUU_Leo_hTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.
Now after I did hard reset and restarted the phone it is again back to the same white screen with "htc".
Following is displayed in bootloader
PB81100 HX-BC
SPL - 1.42.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Can someone please help with step by step guide on how can I recover my HD2?
Related
Htc Hd2 phone has no previous image or rom. I have tried the Task29 and once it completes and i reboot the phone, an triangle appears which says software update fail please try again then it continues onto the RGB screen. Screen says SS-B3 after that SPL-2.08.HSPL 8G XE, CotullaHSPL 0x05 and 0x50 all on the red part of the screen. Im going to be using T-mobile, If anyone can help that would be great.
Hey guys!!!
So im sending my hd2 back to htc for infamous random reboot rapair.
I had hspl3 intalled so i read a few threads on how to erase all traces of hspl3 so opted for the sd card method...(bad choice) it appered to be working ok untill it rebooted it slef and then it showed bad spl now im stuck at a black screen that reads "software update failed please try again so i did and it just was stuck on loading. So after searching for a fix i have tried to put and original rom on it and stays stuck at 0%, tried the leoimg on the sd card but still no luck......
My screen reads the following
ruunbh
pb81120 ss-b3
spl-3.03.000 xe
micro(led) 0x05
micro (touch) 0x40
pls help!!!
i was flashing a new rom on my hd2. i used "active sync," started through the flashing process and the phone came to the all black HTC screen with the status bar but it did not finish to 100%. it got to 40% and froze, then the wizard took me through a recovery process. my phone is stuck on the red green blue and white screen displaying: " ss-b3 spl-2.08 . hspl 8g xe 0x05 0x50 cotullahspl. what do i do from here?
model id is corrupted. you can try flashing stock from sd card, but i suspect you may be now stuck.
i was flashing a new rom on my hd2. i used "active sync," started through the flashing process and the phone came to the all black HTC screen with the status bar but it did not finish to 100%. it got to 40% and froze, then the wizard took me through a recovery process. my phone is stuck on the red green blue and white screen displaying: " ss-b3 spl-2.08 . hspl 8g xe 0x05 0x50 cotullahspl. what do i do from here?
Start from scratch download and Run Task29 this will remove any left over bits from the previous install
Install a HSPL not SPL
Install a compatible Radio for the Rom you want to install
then install your ROM
I am also new with all this stuff but doing the above worked for me For more info check out all the Rom install instruction videos on youtube
HI guys
Last week I received one hd2 tmobile-us from my friend. He got stuck when he was trying to install android.
Currently he's stuck at the t-mobile screen, so I tried to do the power+volume down key and here's the result:
Security Unlocked
--------------------------
PB81*** SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x50
MicroP(TOUCH) 0x50
I'm aware that this is the new fone with spl3.03 on it. So here what I tried:
I tried to use hspl4 and install spl2.08 instead of 3.03 on it, and hspl gives me a error (code 0000000D)
I tried to download a old stock rom (LEO_RUU_1_5_TMOUS_2.10.531.0_Radio_2.08.50) and copy to the SD-CARd (8g), but it stuck at the white screen with the "loading...." text
I tried to install the rom by the bootscreen, does not work.
I tried to install MAGLD on spl3.03 anyway, and as expected, it did not work.
I myself do have another hd2 that's running android NAND on it, and I already spent 3 days searching the forum but I can find any answer on my problem. I'm running out of option and dont know what to do next.
Please help
ps: I forgot to click on the "is this a question thread", but I think it's a question thread