i was flashing a new rom on my hd2. i used "active sync," started through the flashing process and the phone came to the all black HTC screen with the status bar but it did not finish to 100%. it got to 40% and froze, then the wizard took me through a recovery process. my phone is stuck on the red green blue and white screen displaying: " ss-b3 spl-2.08 . hspl 8g xe 0x05 0x50 cotullahspl. what do i do from here?
model id is corrupted. you can try flashing stock from sd card, but i suspect you may be now stuck.
Related
Htc Hd2 phone has no previous image or rom. I have tried the Task29 and once it completes and i reboot the phone, an triangle appears which says software update fail please try again then it continues onto the RGB screen. Screen says SS-B3 after that SPL-2.08.HSPL 8G XE, CotullaHSPL 0x05 and 0x50 all on the red part of the screen. Im going to be using T-mobile, If anyone can help that would be great.
Hey guys!!!
So im sending my hd2 back to htc for infamous random reboot rapair.
I had hspl3 intalled so i read a few threads on how to erase all traces of hspl3 so opted for the sd card method...(bad choice) it appered to be working ok untill it rebooted it slef and then it showed bad spl now im stuck at a black screen that reads "software update failed please try again so i did and it just was stuck on loading. So after searching for a fix i have tried to put and original rom on it and stays stuck at 0%, tried the leoimg on the sd card but still no luck......
My screen reads the following
ruunbh
pb81120 ss-b3
spl-3.03.000 xe
micro(led) 0x05
micro (touch) 0x40
pls help!!!
My HD2 was repaired. Board/IC changed and also new screen.
But the guy said software needs to be installed. The screen was stuck on the first white screen with "htc".
I tried installing custom ROMS, HSPL etc but it got stuck with triangle and exclamation mark. I read lot of forums and realized I need to flash with stock rom using SD card. I downloaded the below stock/ship ROM from HTC site did the same with SD card flash and everything went successfully.
RUU_Leo_hTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.
Now after I did hard reset and restarted the phone it is again back to the same white screen with "htc".
Following is displayed in bootloader
PB81100 HX-BC
SPL - 1.42.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Can someone please help with step by step guide on how can I recover my HD2?
i was flashing a new rom on my hd2. i used "active sync," started through the flashing process and the phone came to the all black HTC screen with the status bar but it did not finish to 100%. it got to 40% and froze, then the wizard took me through a recovery process. my phone is stuck on the red green blue and white screen displaying: " ss-b3 spl-2.08 . hspl 8g xe 0x05 0x50 cotullahspl. what do i do from here?
Start from scratch download and Run Task29 this will remove any left over bits from the previous install
Install a HSPL not SPL
Install a compatible Radio for the Rom you want to install
then install your ROM
I am also new with all this stuff but doing the above worked for me For more info check out all the Rom install instruction videos on youtube
Hey everyone.
Listen here is my problem. i installed android on my hd2 and after a day it gave me quite alot of issues like apps crashing . phone applications not working.
So i decided to take it back to windows 6.5.
I used the method of putting a nbh file in the SD card. of spl version 3.03.000. if was updating and then at once it stopped and said update failed. And since then its not starting its on the RED GREEN BLUE AND WHITE screen :/
it says
HX-BC
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
PLease help me what to do. i have no logo on my phone. all i get is a pink circle when i turn it on, so i dont knw whether i used the correct rom or not
SO please i need urgent help..
what rom did you flash? full filename please
do you have a tmous or a regular hd2? (what colour are the send and end keys)
anyway, , in bootloader, where you have copied down the text, , is the top line above HX-BC really blank?
samsamuel said:
what rom did you flash? full filename please
do you have a tmous or a regular hd2? (what colour are the send and end keys)
anyway, , in bootloader, where you have copied down the text, , is the top line above HX-BC really blank?
Click to expand...
Click to collapse
Thanks for the reply.. but i found the problem i was using an unbranded Rom .. but mine was a tmobile. since there was no logo on it i got a bit confused.