What I mean is I reflashed to eugenes gingerbread RL2 today and i dont really like it, id like to go back to my stock state (unrooting?) i tried odin and id just get a infinite loop on start up with nandroid flashing on and off. so i was forced to reinstall the gingerbread rom again, any help appreciated!
thollis89 said:
What I mean is I reflashed to eugenes gingerbread RL2 today and i dont really like it, id like to go back to my stock state (unrooting?) i tried odin and id just get a infinite loop on start up with nandroid flashing on and off. so i was forced to reinstall the gingerbread rom again, any help appreciated!
Click to expand...
Click to collapse
in the bible find the STOCK JFD files and then put those on the odin, you might be putting wrong files in.
thanks, i downloaded them from android spin, ill redownload from the bible and leave feedback
okay so i downloaded the true 2.1 files from the bible threw em in odin and ive been here for about 5 minutes
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
edit- been on this for about 30 mins now
edit- re tried it, accidentally checked a box, seems to be working now.
final edit- back to stock, thank you ^^
thollis89 said:
okay so i downloaded the true 2.1 files from the bible threw em in odin and ive been here for about 5 minutes
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
edit- been on this for about 30 mins now
edit- re tried it, accidentally checked a box, seems to be working now.
final edit- back to stock, thank you ^^
Click to expand...
Click to collapse
which box did you uncheck because im getting stuck at the kernal part
charzarn said:
which box did you uncheck because im getting stuck at the kernal part
Click to expand...
Click to collapse
If you are flashing back to the shipped ROM (T959UVJFD) then you can check "Re-partition". Everything else should should be left un-touched.
Related
can anyone help i had this installed 2.2 was woring great then i went to add a movie to my sd card and it froze up.i tried to do a nan restore but something happend and i got a phone>pc picture and cant boot. i can get in dowload mode but nothing works in oden that i can tell it starts loading the my phone screen goes blue
ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> cache.rfs
<ID:0/017> modem.bin
<ID:0/017> factoryfs.rfs
thats as far as odin goes
Try eugenes froyo that doesnt brick.
Sent from my SGH-T959 using XDA App
i tried and thats far as it goes and my screen turns blue
Make sure you are using the latest version of odin, and use the pit file and check repartition in odin.
Sent from my SGH-T959 using XDA App
whats the newest odin
dbm0361 said:
whats the newest odin
Click to expand...
Click to collapse
Try searching for odin v1.7.
Sent from my SGH-T959 using XDA App
same thing goes to 0/017> factoryfs.rfs the my screen changes from download mode to a random color
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> cache.rfs
<ID:0/017> modem.bin
<ID:0/017> factoryfs.rfs
Right click and run odin as admin. Also look at this thread...
http://forum.xda-developers.com/showthread.php?t=798020
tried still no go on it
my phone usually takes 3-4 tries to get odin to work. nothing was done differently on my 1st or 2nd (or even 3rd) try, its weird like that.
keep trying it as people try to help you solve your problem!
As the other thread said, do you have any computer you can try this on? If yea then it might be worth a try for right now.
thanks got it
dbm0361 said:
thanks got it
Click to expand...
Click to collapse
Were you able to get it to work? Do let us know how did you make it work or what worked for you.
dam how come other peoples phones brick? i always flash axura but never bricked for me
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Hi, so i downloaded the version for my phone
GT-I9100_XEO_I9100XXKH3_I9100XXKH3_I9100OXAKH3.
I wiped factory/data reset, system something and dalvik cache.
I used odin to flash ticking only the PDA,
but it stuck for like 1 hour on this stage:<ID:0/012> factoryfs.img
Both the loading bar on the phone and on odin are on the same level.
Here is the full Message:
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> cache.img
<ID:0/012> factoryfs.img
Any help please??
99nirc99 said:
Hi, so i downloaded the version for my phone
GT-I9100_XEO_I9100XXKH3_I9100XXKH3_I9100OXAKH3.
I wiped factory/data reset, system something and dalvik cache.
I used odin to flash ticking only the PDA,
but it stuck for like 1 hour on this stage:<ID:0/012> factoryfs.img
Both the loading bar on the phone and on odin are on the same level.
Here is the full Message:
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> cache.img
<ID:0/012> factoryfs.img
Any help please??
Click to expand...
Click to collapse
Did you by chance check repartition? If so I think you may be in trouble.
Nope, i checked like 4 times before i clicked start, and i can see it now,
I didnt ticked Repartition...
99nirc99 said:
Nope, i checked like 4 times before i clicked start, and i can see it now,
I didnt ticked Repartition...
Click to expand...
Click to collapse
Okay well there may be hope. Pull the battery and then use the button combo to see if you can get to download mode if you can then I suggest you restart your PC and make sure your using a UBS connection that is on the back of your PC, do not use any USB hubs or front usb connections. Also make sure kies in not running in the back round as it can interfere with the USB connections.
I made a backup with Cwk so i hope nothing will go wrong...
I pulled the battery, and i got to download mode, but odin doesnt seem
to recognize the phone...
Edit: i just noticed on processes, that kies Was running...
but Odin doesnt recognize the phone now...
Edit2: Odin managed to recognize the phone, so i started the process again...
but i got an error:
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img
<ID:0/017> factoryfs.img
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should i try again?
99nirc99 said:
I made a backup with Cwk so i hope nothing will go wrong...
I pulled the battery, and i got to download mode, but odin doesnt seem
to recognize the phone...
Edit: i just noticed on processes, that kies Was running...
but Odin doesnt recognize the phone now...
Edit2: Odin managed to recognize the phone, so i started the process again...
but i got an error:
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img
<ID:0/017> factoryfs.img
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should i try again?
Click to expand...
Click to collapse
Well as long as you can get to download mode there is hope. Maybe try a different firmware package.
Are you using the Samsung USB cable or the HTC one?
Successful!!
I just tried it again and it worked!
Thanks alot everyone, especially the one who told me to check
if kies was running
Hi, I been stuck on cache.img for hours (i left it overnight) kies isnt running in the background and i tried many times, im trying to flash XWKI4.
I came across this post and im using a HTC cable to connect, is this a problem??
Edit: Kies really messed up my phone it kept failing on firmware upgrade, asked me to do firmware emergency but that wasnt working either, eventually the firmware upgrade worked BUT the phone doesn't recognise my SIM card so i want to reflash in ODIN
saffad said:
Hi, I been stuck on cache.img for hours (i left it overnight) kies isnt running in the background and i tried many times, im trying to flash XWKI4.
30 mins max
I came across this post and im using a HTC cable to connect, is this a problem??
Probably is not the correct cable as per instructions
jje
Click to expand...
Click to collapse
hah yea had the same problem, its always dam kies gw gw
Tell me about it, kies is useless.
I tried another firmware but thats stuck on boot.bin right now, i have to travel 2hrs to get my samsung cable!! no idea what to do now..phone doesn't start (says do an emergency recovery). Thinking of going to service centre, i know I haven't void my warranty.
. Thinking of going to service centre, i know I haven't void my warranty.
ROOT = warranty void .Custom rom = void warranty
So if you have neither you are ok if not you need to flash stock rom to unroot and set rom counter to zero with USB jig .
jje
JJEgan said:
. Thinking of going to service centre, i know I haven't void my warranty.
ROOT = warranty void .Custom rom = void warranty
So if you have neither you are ok if not you need to flash stock rom to unroot and set rom counter to zero with USB jig .
jje
Click to expand...
Click to collapse
i never rooted and i never flashed a custom rom, i never even flashed a rom, just used kies to upgrade..so i think im ok
saffad said:
i never rooted and i never flashed a custom rom, i never even flashed a rom, just used kies to upgrade..so i think im ok
Click to expand...
Click to collapse
Yes you are ok .
Kies update broke phone well known service call .
jje
I have got stuck on DATAFS. Should I pull out the battery and give another try or ?
THX
THX A LOT Revived my SII!
****ty kies that sucks my sii wile upgrading fw...
THX ODIN and XDA
how much time it will take via oden i have single file putted in PDA box file is about 1.5 gb
asadnow2k said:
how much time it will take via oden i have single file putted in PDA box file is about 1.5 gb
Click to expand...
Click to collapse
5 - 10 mins to flash an entire firmware. Unless u flashed the wrong file...
"To err is human, to forgive is divine"
Sent from my SGS II
1.5 Gb pda file?
What the hell are you flashing there?
Sent from the little guy
I had a S2 i777, then I got a S3 so I gave the S2 to my mother. I just installed fresh ShoStock because I thought that would work well. It worked ok, but after about a month I came home and she said it wasnt working.
It appeared to be bootlooping at the ShoStock logo. I downloaded a new rom for it on my phone the put the SD card in her phone, booted into clockwork and tried flashing it. Trying to wipe or flash at all results in hanging for a few minutes then rebooting and getting stuck at the Samsung S2 logo now. Since then I've tried various odin methods for flashing to unbrick around xda. Every time I try to flash with odin, it either says error or it just hangs until I manually stop it after 30+ minutes. I've even got as desperate as to have Kies revert it to stock, it also hangs at 2%.
At this moment, you can see the screen its stuck it in the attached screenshot, its probably worth noting its been at this screen ever since the first Odin flash failed.
I do have a microUSB jig so I can kick it into download mode if I have to. Anyone got any ideas :f
Try the following procedure exactly as written. In case the problem is nand read/write corruption, this should clear it and get the phone working again.
1) Go to this post and download the Tar version of Siyah 2.6.14 Kernel. Flash it in PDA without ticking Re-Partitioning.
2) Successful? Nice. Next, flash the full stock Gingerbread distribution from the Download Repository, I777UCKH7 including the bootloaders and everything, in the PDA slot.
3) If that is successful you are done. If it is not, then:
4) Download the SBL Bootloader from the Download Repository. Flash it as PDA in ODIN, without ticking Re-Partitioning.
5) Flash the Kernel, as in step 1.
6) Flash the full stock Gingerbread distribution, as in step 2.
When I try and flash Siyah in Odin for step 1, it just hangs.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> NAND Write Start!!
Click to expand...
Click to collapse
The box at the top says kernel and the progress bar goes all the way across, it will never get past this.
Since it won't flash the kernel, the next thing to suspect and try to find out if the cable is faulty. Or anything in the path from the computer to the phone. So...
Try a different cable, or as many different cables as you can put your hands on.
Try different ports on the computer, and use the ones attached directly to the motherboard if it is a desktop.
Try a different computer.
In some cases where there is a connection problem, just flashing repeatedly may eventually result in a pass, as some have reported.
Tried it on two different laptops, with three different microUSB cables on each, no dice.
I tried flashing the kernel from step one you gave, I also tried the I777UCKH7-CL503881 FULL Odin3 One-click from the Download Repository and it hangs at:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> sbl.bin
<ID:0/003> param.lfs
<ID:0/003> cache.img
Click to expand...
Click to collapse
I don't have any additional suggestions for trying to fix it yourself. The problem could be one of several things. It doesn't seem like a simple soft brick. Maybe it could be damaged memory or some other hardware failure. Or maybe not.
If you are close to an AT&T service center, maybe you could take it by and ask them to flash it back to stock for you. If that fails, then at least you are pretty sure the problem is in the phone, not the connection. I realize it is not under warranty any longer, but they should at least try that for you.
You could send it to Samsung repair center to be worked on. They would probably fix it, but it won't be free, and it will also take two to three weeks. If it were me, I would call them first and discuss the issue with them.
Give these guys a call or message them and tell them your problem and they can most likely fix it. I have had work done by them in the past there quick and there professional...
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t/
Sent from my SGH-I777 using xda app-developers app
Hello!
So I am about to go turn in my phone to the sprint store today and get the note 4. I am trying to downgrade to stock from the minium(sp?) Rom. I am trying to run this file N900PVPUBMI3_N900PSPTBMI3_N900PVPUBMI3_HOME.tar.md5 on AP in Odin. The error I am getting is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
I have been working on this for a few hours now and have scoured the internet. I have seen countless people with the same problem but I just can't figure it out. Any suggestions or questions you need answered should be pretty fast, I will be sitting at the computer for the next few hours working on this. Thanks everyone!
skelieman said:
I have been working on this for a few hours now and have scoured the internet. I have seen countless people with the same problem but I just can't figure it out. Any suggestions or questions you need answered should be pretty fast, I will be sitting at the computer for the next few hours working on this. Thanks everyone!
Click to expand...
Click to collapse
Hey Skelie,
What version of the bootloader are you currently on? Once you have upgraded to NAB or newer, you are not able to flash back down below that.
If the only thing you're trying to do is return you phone with a fully Stock ROM, I'd recommend either flashing the NC5 all-in-one restore by rwiclo or the NH7 restore that was uploaded by micmars. Either one should work flawlessly in ODIN v3.7 and you can get your new Note 4!
I hope this helps!
-Topher
Hello guys, this is my first post. I was subscribed to this website for some time. But I was always able to solve my issues just by searching the forums here without having to post my own thread. However, I have been looking for the "PIT" file for my Samsung Galaxy Light SGH-T399N with no luck. My phone was stuck on the MetroPCS logo screen. So, I have not been able to flash the phone via Odin because this file is missing. I can not even go into recovery mode. I was wondering if you guys could helped me. I appreciate your help in advance!
This is what I am getting from Odin:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Anybody? I have read a lot about this and the PIT file is what I need to solve my problem.
This is what I am getting from Odin:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Anybody?
I need this file please guys... Anybody?
I thought that this was an easy one.
I actually found the file myself. Here is the file in case somebody else needs it: http://chomikuj.pl/zabrzesklep/*e2*...GH-T399/T399_garda.pit,4041671026.zip(archive)
Kudos
GalaxyVibe said:
I actually found the file myself. Here is the file in case somebody else needs it: http://chomikuj.pl/zabrzesklep/*e2*...GH-T399/T399_garda.pit,4041671026.zip(archive)
Click to expand...
Click to collapse
Seek and You Shall Find is truly a Universal Truth
Hopefully this will help me flash my sis's phone FINALLY :highfive: