The light of the bottom 4 keys always turned on whenever i touch the screen during the time of reading at night. It made the eyes very uncomfortable. I can not find how to setup to take it off. Is there any way to do so? My rom is gingerbread clone final R2 by Great Eugene.
My English is not good,sorry!
Thank you for any help and comments.
Last night I took my vibration apart to mod the buttons to blue dots, but there's a piece of plastic that holds the mic and other chips glued or pressure fit over the glass from the back. Anyone have any luck accessing the glass? I may take the leap and pry the plastic out when I get some time. Grr.
Sent from my SGH-T959
Thank you very much for the answer, fit333. It looks like that it is not a trouble bothering only me. I believe it could be fixed by some soft setup. I frankly do not dare to pry something out.
Get some electrical tape to cover it during the night time!
Sounds good. It is a rigid, not soft solution.
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Related
Firstly, a warm greeting to the xda community for all your wonderful contributions to the push for education about these amazing devices we've come to know as smart phones. Truly learned so much through this site. However, I came to this page not eagerly seeking new info on the latest phone or newfound wisdom on my own, but heartbroken. At only four days old, the beauty of my newly purchased Vibrant has been marred by a small but deep scratch in the middle of the amoled. The means by which the scratch came about are, well, surprising to me even still. Was using the phone night before last, pinched in to zoom on a link while browsing the net. Apparently I had a bit of a hangnail on my thumb which literally dug in and carved out a scratch in the screen in front of my eyes. Now, I've perused this site and others thoroughly looking for a solution & am well aware of the flag-wavers for Corner and their gorilla glass technology. I'm not here to start a war or debase the company, simply looking for a viable solution to a problem which has really impaired use of this new phone outside of replacing the entire screen, something I cannot afford. Thanks in advance to anyone who's taken to time to read this tangent and actually respond, regards
lol a hangnail scratched it? sounds crazy. anyways i read somewhere that it can be polished out. not sure how true that is.
If you have access to a dremel you might be able to polish it out using some sort of scratch remover. You may have to do some digging but a while back another member on here wrote a very detailed thread on removing a scratch. Good luck.
Damn man.. a buddy I work with and I have literally tried to scratch it with keys.. even a friggin razorblade, NO JOKE! A hangnail.. you must be kidding, right? If you aren't, and you bought it legit, make sure it is under warranty and break it in a way that should work. I would be able to break mine happily if a razorblade didn't scratch it, but a hangnail did, lol!
But seriously, this is the first phone I don't have a screenprotector on, and I leave it in my pocket with things that should have tore it up, yet it is still as new looking as the day I got it. Hell, you may be able to return it just because that sounds like a defect.
http://forum.xda-developers.com/showthread.php?t=821129&highlight=scratch
Heres a link to the thread I was referring to!! Hope it helps!
I was gonna ask why you are posting at 2:30AM but then I saw your name....
Good luck with the scratch.
Can you feel the scratch?
Once I thought I had messed my screen up pretty bad. I saw several light "scratches" and tryed to rub them out thinking maybe they were streaks. Nothing worked, until I put a Zeiss Lens Cleaning Wipe to it and they came right out.
I don't use screen protectors, I use my phone every day, it's scratch free. I'm also a guitar player with long nails... just sayin.
Do you have a screen protector?
It really seems unlikely that you scratched the glass with a fingernail.
Are you sure that there isn't a screen protector on, and you scratched that?
MintJulep said:
It really seems unlikely that you scratched the glass with a fingernail.
Are you sure that there isn't a screen protector on, and you scratched that?
Click to expand...
Click to collapse
Can understand why you'd assume I'm making some obvious misconception. Sadly, no, there was no screen protector on. The scratch is deep, the pixels inside it are reflected, giving a distracting warped look to them against any solid color other than black & it can be felt when running your finger across the screen. Though it seems unlikely, I saw it happen. If anything, hope this thread is another supporting opinion towards putting a screen protector on your phone asap. Gorilla Glass is Not impervious, my phone is physical proof. Thank very much for the suggestions and link, after further research it appears that a dremel, quality glass polish & some elbow grease is the only option I have. Hoping it works!
Please do not polish as someone else suggested.
You will make matters worse, and cause swirl marks, and a complete mess.
JUST LEAVE IT ALONE.
There was a thread somewhere with pics of someone polishing and repairing their scarted screen, it looked scarry. Don't even attempt it.
I have heard of using toothpaste and non abrasive cloth may work. I have lots of scratches on my camera lens, which is worse.
I also have scratches all over the screen (bought mine used on Craigs). This may sound stupid, but I put a screen protector on, and the scratches are harder to see.
Side note - most people with screen protectors on put up with much worse visibility as the protector gets used more. Most of the discomfort with the scratch is mental. Put on a protector and put in your mind it's the protector scratched up, and you will feel better. I know this from experience with the same phone.
TD
Who are you, Wolverine?
tjdmobile said:
I have heard of using toothpaste and non abrasive cloth may work. TD
Click to expand...
Click to collapse
Do NOT use toothpaste on your screen. It will only cause more MICRO scratches which will annoy the heck out of you outside in the sun or in bright lighting.
Trust me, I tried that. (But I got a replacement due to a malfunctioning earpiece.)
Moved of: Samsung Vibrant > Vibrant General
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Hello,
I just bought the vibrant; however, the bezel is slightly cracked. I wanted to replace it, but every dismembering video of the phone I checked removes the motherboard. Is there any way in which I can remove the bezel without messing with the motherboard, screen, or any other components around it?
Also, the battery cover is scratched. I wanted to buy the replacement cover but there is one available for the i9000 not the t959. I read that it will fit, but I just wanted to confirm it.
I apologize if I sound like a noob or posted this in the wrong section. I spent 3 hours searching for an answer, but found nothing. Any help would be greatly appreciated.
Thanks
Please? Any help would be appreciated.
I don't think you really have an option. After looking at some screen repair guides for the Vibrant it appears the bezel has a panel that goes under the soft keys (see attached image). Also, I've never had my phone get damaged so I never have had to tinker with my physical device. What you could do is buy a case that covers the front bezel like the one I use. It's about 5$ and will hide your bezel + protect it. That's all I can suggest, hope this helps...
Also, not sure about the i9000 back cover working on the Vibrant but here is a brand new back cover you can buy for the vibrant for about 6$.
The only way to replace the bezel is to remove the motherboard. Also, I use i9000 covers for my vibrant. They work beautifully. (I have a chrome one one! ^.^)
Sent from my T959 using XDA App
Thanks for the help guys. All the electronics I have don't have a single scratch on them, literally, I baby them. I bought this from craigslist; however, I didn't see the scratch during that time. I am very irritated atm.................regardless, thanks for the help.
I was wondering, If I buy a bezel, would somebody be willing to replace it for me? Obviously, I will pay you for the job. If yes, I would greatly appreciate that. Please send me a private message if interested.
I took apart my Incredible 4G to replace the screen and this small rubber piece fell out. I looked the phone up and down and watched carefully at all the guides, but still can't figure out where it goes. Does anyone here know?
Rubber Housing for part of the capacitive button
jin211 said:
I took apart my Incredible 4G to replace the screen and this small rubber piece fell out. I looked the phone up and down and watched carefully at all the guides, but still can't figure out where it goes. Does anyone here know?
Click to expand...
Click to collapse
This is a rubber piece correct?
It looks like the housing around the light source for the capacitive buttons, either "Back" or "Recent App" button. You will have to lift the board up at the bottom of your phone to see them. This piece holds the clear plastic that directs light to those buttons.
Good Luck getting it back together again.
DavDoc said:
This is a rubber piece correct?
It looks like the housing around the light source for the capacitive buttons, either "Back" or "Recent App" button. You will have to lift the board up at the bottom of your phone to see them. This piece holds the clear plastic that directs light to those buttons.
Good Luck getting it back together again.
Click to expand...
Click to collapse
Yes it's a rubber piece with small step-like grooves like a staircase. I looked again where you were talking about, the light guides, and there already seems to be two rubber pieces around the Back and Recent Apps buttons so I don't think that's quite it. Should there be a piece around the Home button? Because it doesn't seem to fit there.
Any other suggestions? I'm sure it will work fine without it, but it's really annoying that this piece seemingly popped out of nowhere.
Okay, nvm that was the right piece for the light guides. I actually have two of these phones sitting around with broken screen while I wait for the replacement parts to come. I thought that the piece had fallen out of the second phone I was working on, but I checked the first one again and turns out it was missing that piece. How it ended up falling out when I was taking apart the second, I have no idea lol. Guess I need a bigger workspace.
Thanks DaveDoc!
No problem
Sent with my Dinc4G
Hi guys, I hope this section is the right one for my kind of question, this would be all hardware issues mostly.
I just replaced a screen for the samsung galaxy s2 GT-I9100M, screen is looking good, everything works fine, however, since I did a screen swap from another phone, I did not have any of the double sided glue to, I guess, hold it in place. As of now, my screen is slowly popping out from one corner ever so slightly that I can see light bleeding through the gap it makes with the frame. I just want to confirm is this is only due to just me not having double sided glue alone the back that the screen is placed on. I ordered some d.s tape as I thought it would help me, should be coming later.
Secondly, I noticed that just sometimes the screen wouldn't be as responsive, sometimes touches won't register unless I press just a bit. Would this be because the top glass is a little loose? (due to no tape?). I was wondering if someone can explain to me how the touch inputs actually works. Do you only need to the glass or does the glass have to be close to the LCD for it to register as a touch input. Because if that's the case, then I suppose having the d.s tape can solve all my problems.
Any advice or suggestions will be appreciated! Thanks a lot. I'm repairing a phone for a friend and its a surprise. : )
Hi Guys,
I have an S3 i9305, that I have replaced the screen (I purchased a complete screen & frame), Geniuine Samsung part where the screen and frame are already bonded together with double side tape. (did this after I cracked my original screen,). IT was pretty easy to replace..
Unfortunately, the double sided tape that attaches the glass screen to the frame is starting to come apart at the home button end.
Does anyone know any way to try and fix this.. its coming apart about 1-2mm, where I keep pushing it back down, but it's lost its stick.
If you've ever repaired one, you would know its practically impossible to remove the screen from the frame without Cracking it.
I've considered dropping a tiny bit of super glue just around the home button.. but worried I might stuff the mic/home button..
Any helpful suggestions on how to repair?
One thing I have just thought of is a case that pushes the screen down / clamps together in two parts that click together (like otterbox etc).. ie, where the case pushes the screen against the body..least this will stop the screen coming away.
Thanks for any help.
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!