Hi, I am having problems with flashing official 3.14 wwe rom on my hd2. Now I have 1.66.405.2 wwe rom, radio 2.06.51.07 installed in this phone and when I enter the bootloader(four colors screen), it says that
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
I have formatted the sd card and removed it. my ram is 448mb.
but every time I try to flash the 3.14 rom, wwe or hk version, the program ran perfectly until the progress bar appears(as the roms started being flashed on hd2 ), when it reach 1%, the usb connection will automatically disconnect and the phone will shut down itself and restart. My hd2 is not a branded one.
That's all I can tell about the problem. Can anyone help?
Thanks alot.
Please do not create 2 threads asking the same question on more than 1 forum. Your thread over in Q&A is more than sufficient.
Thread closed.
Related
hello i'm in need of dire help! i flashed my htc hd2 with the dexter rom and all was well after that i tried to flash to a clean rom series and it doesnt happen!!! nothing! i can change anything. when i try to change my spl version its the same it says i need to have 1.42.000.i tried downloading it from htc website but after i input my S/N it says that this software was not made for my phone. could someone please help me? this is what my boot loader shows
PB81100 HX-BC
SPL-2.08.000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
you don't have hspl, run hspl3 choose 2.08.hspl then run your rom flash.
HI guys
Last week I received one hd2 tmobile-us from my friend. He got stuck when he was trying to install android.
Currently he's stuck at the t-mobile screen, so I tried to do the power+volume down key and here's the result:
Security Unlocked
--------------------------
PB81*** SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x50
MicroP(TOUCH) 0x50
I'm aware that this is the new fone with spl3.03 on it. So here what I tried:
I tried to use hspl4 and install spl2.08 instead of 3.03 on it, and hspl gives me a error (code 0000000D)
I tried to download a old stock rom (LEO_RUU_1_5_TMOUS_2.10.531.0_Radio_2.08.50) and copy to the SD-CARd (8g), but it stuck at the white screen with the "loading...." text
I tried to install the rom by the bootscreen, does not work.
I tried to install MAGLD on spl3.03 anyway, and as expected, it did not work.
I myself do have another hd2 that's running android NAND on it, and I already spent 3 days searching the forum but I can find any answer on my problem. I'm running out of option and dont know what to do next.
Please help
ps: I forgot to click on the "is this a question thread", but I think it's a question thread
I have a T-mobile HTC HD2 phone. I found a software update for it and tried to get it to update. it got to 73% and failed. I ran the recovery option and it failed again. It keeps failing and I cant get it to move past 0% now.
The boot screen says.
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Upgrade ROM code error
Please Try again
What do I do now?
Fixed!
I found ver2.13.531.1 for download in the forums (sorry cant find it again) and loaded it onto the phone via USB no problem.
Thanks
Same problem
Please help me ! I have the same problem and I don't know how to do ! Can you explain me in a tuto ?
If TMOUS simply get latest correct device ROM from HTC:
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo
using ROMs found on XDA or filehosts could end up with a bricked TMOUS device unless you know what you are doing or take time to research correctly.
If flash fails with ROM code error that means CID is wrong for device, IE: ROM you are flashing is not correct original ROM for your devices region.
HSPL bypasses CID lock but on TMOUS HD2 a HSPL & stupid user ends up with a .51 radio & bricked device
The rule: read first flash second & if TMOUS get your rom direct from link above using IMEI ...
hi all, I hard formatted my windows phone 6.5, HTC HD2 and started setup for HSPL3 For HTC Leo. The setup started and failed and i'm stuck with it now. it gives me screen
HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
and when i start phone power+volume down with leoimg.nbh in SD card the screen says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
Upgrade ROM code error. please try again
Serial.
Please help!!!
Common issue:
You still have standard SPL installed & thus require a ROM that is correct ROM code of original country/operator which the one on your SD card is not hence "Upgrade ROM code error"
Your 2 options are:
1. Use HSPL 3 or 4 to install a HSPL which bypasses CID lock & allows you to flash any ROM but by USB & RUU, if do from SD it overwrites HSPL with SPL everytime
2. Find a compatable CID code ROM & flash it ...
If this is a T-Mobile USA handset make sure to flash a ROM with correct radio or you will have a brick ...
Mister B said:
If this is a T-Mobile USA handset .
Click to expand...
Click to collapse
it cant possibly be a tmous with 1.42.0000 spl.
@OP, you are in the wrong forum, this is for tmo usa model hd2 only. (That's why there's so few recent posts, , , most tmous users are now in the android forums.
With the phone in the stripey screen (bootloader) connect usb, , when 'serial' changes to 'usb' you are ready to try running hspl again. What are you aiming for? if its android, (meaning your target is 2.08.hspl) use HSPL2 instead.
i have HTC HD2(made in china)
when i press power On Button then show( software update failed please try again)
when i turn on it on flashing mode in color (red greeen blue and white) then it shows.
PB81100 SS-BC
SPL-2.08.0000 8g XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
what i have to do now please help.
depends what you want to do. looks to me as if it has been flashed from sd with a tmous stock rom, which has loaded 2.08.0000 which has then said 'this isn't a tmous' and given your error.
lets say you want to move to android
into bootloader
hspl4 --> 2.08.hspl (not 2.08.0000)
bootloader
flash magldr
magldr menu - usb flasher
use nand toolkit to set system partition size
magldr menu - 8 ad recovery
instal zip from sd card - choose zip - point it at whatever android rom you want to instal (zip on your sd card)
done/
also, you posted in the wrong section, prepare to be lambasted.
Please help again
i can change only hspl only as per below.
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
i want window 6.5 only not any thing . please help........
serial # is SH08PNW01126
made in china.
please help....
get any 3.14 winmo 6.5 rom.
put phone in bootloader, connect usb lead.
run hspl4
in the dropdown choose 3.03.hspl
when phone reboots, go again into bootloader
run the 3.14 rom.exe installaler.
done.
please help...
Thanks my dear for help me
but now i am facing a different problem .
my dear i have done it.
run into boot loader
run SPL4 and from filter SPL3.00 HSPL
Restrat
again start into boot loader
RUN ( ROM Upgrade for HTC HD2 (O2 UK 3.14.206.1)
it didn't completed.
got error
now turn off and didn't getting ON.
where is the fault.????????
please help.
At what % did you get error?
Explain how it won't boot, no power? Suck on boot screen? Can you enter Bootloader?
please help
1st when is going on into boot loader then during updating ROM it has stop at 8%.
after it got OFF and still not showing any thing. even i checked battery voltage . voltages are ok but leo not ok...
but from couple of days its not showing charging ' not showing any thing , even its not showing ( software update failed)
not entering in boot loader.
and not showing any thing on original charger.