I have a T-mobile HTC HD2 phone. I found a software update for it and tried to get it to update. it got to 73% and failed. I ran the recovery option and it failed again. It keeps failing and I cant get it to move past 0% now.
The boot screen says.
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Upgrade ROM code error
Please Try again
What do I do now?
Fixed!
I found ver2.13.531.1 for download in the forums (sorry cant find it again) and loaded it onto the phone via USB no problem.
Thanks
Same problem
Please help me ! I have the same problem and I don't know how to do ! Can you explain me in a tuto ?
If TMOUS simply get latest correct device ROM from HTC:
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo
using ROMs found on XDA or filehosts could end up with a bricked TMOUS device unless you know what you are doing or take time to research correctly.
If flash fails with ROM code error that means CID is wrong for device, IE: ROM you are flashing is not correct original ROM for your devices region.
HSPL bypasses CID lock but on TMOUS HD2 a HSPL & stupid user ends up with a .51 radio & bricked device
The rule: read first flash second & if TMOUS get your rom direct from link above using IMEI ...
Related
I'm sorry if it is duscussed already and if this is the wrong section but I've searched and I'm paniced (sorry if it is the wrong word but my English is not very good). I had a HD2 for 2 months already, booted Android and etc. and it all went good until today... A friend of mine gave a video in youtube in which is shown how to uninstall HSPL. I've followed everything - downloaded the official HTC rom, copied the .nbh file on the SD card, followed the instructions and everything was OK but when I tried to boot it shown the 3-color screen and message "Software update failed. Please try again". In the 3-color screen it says :
SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x05
When I enter in bootloader it gives me the same but with
"Upgrade ROM code error. Please try again."
When connect the USB cable it says "USB" and when the USB cable is disconnected it says "Serial".
If I try to install new official ROM it goes up to 1% and gives an "Error 294 Invalid vender ID".
There is no HSPL (I think so) for my version - 3.03.0000 and I don't know how to downgrade and if there is any way to downgrade.
Please, tell me if there is anything I can do to fix my phone. ;( Thank you.
you have simply tried to flash the wrong 3.14 rom. it has passed the first security test because hspl was installed, updated the spl from hspl to spl 3.03.0000 and then it has run the security test again but this time failed so the flash halts.
enter bootloader and flash ANY CORRECT stock rom. this means if your original rom was example vodafone italy, you need a vodafone italy rom, flash it over usb, job done.
Thank you very very much! It works great!
I am newbie to this forum and i am needing help, Infact i bought htc hd 2 with android rom and i tried to revert it to original 6.5 win rom as given in a thread through SD card method and during the process my Mobile restarted stating an error message Software Update failed with black screen and then four color screen appears with "update rom code error please try again" statement
more details are like
P881100 HX-BC
SPL- 2.80 0000 8G Xe
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
AND then i get another message of "Not Allowed" on Screen
Please any body tell me what to do I will be sincerely Obliged.
you used teh wroing stock rom. you cant just use any stock rom, it must be correct for your serial number. (region and carrier, to be more precise)
go to htc.com choose your region, - support - downloads - and find a rom download that accepts your serial number, flash that from sd card.
(also, next time you post a question, lots of info, please, , , phone model ((regular or tmous)) rom you tried to flash (full filename) makes it easier to get the correct help.)
Dear samsamuel
I m sincerely thank full for such a nice advice and since i read ur comments i am looking for the original stock rom for my mobile but surfing almost with every regoin on Htc web site i couldnt find it and I always get the error
"Sorry, this software download is not suitable for your device" i would seriosly appreciate if you please manage to provide me with the original stock rom i m giving the S/N number below
S/N :HT9BXNW05370
Ok, forget about the correct stock, get hspl4, bootloader, USB, run hspl4, choose 2.08.hspl. you can now flash any stock rom over USB. (If you want to use a 3.14 rom choose 3.03.hspl instead of 2.08.hspl.)
samsamuel said:
Ok, forget about the correct stock, get hspl4, bootloader, USB, run hspl4, choose 2.08.hspl. you can now flash any stock rom over USB. (If you want to use a 3.14 rom choose 3.03.hspl instead of 2.08.hspl.)
Click to expand...
Click to collapse
I dont know how to say you thank you i suffered a lot but finally as i installed the hspl4 i got it working.................................m so happy ... thanks a lot sam m really obliged and if ever you find some thing i can do for you just let me know....
HI guys
Last week I received one hd2 tmobile-us from my friend. He got stuck when he was trying to install android.
Currently he's stuck at the t-mobile screen, so I tried to do the power+volume down key and here's the result:
Security Unlocked
--------------------------
PB81*** SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x50
MicroP(TOUCH) 0x50
I'm aware that this is the new fone with spl3.03 on it. So here what I tried:
I tried to use hspl4 and install spl2.08 instead of 3.03 on it, and hspl gives me a error (code 0000000D)
I tried to download a old stock rom (LEO_RUU_1_5_TMOUS_2.10.531.0_Radio_2.08.50) and copy to the SD-CARd (8g), but it stuck at the white screen with the "loading...." text
I tried to install the rom by the bootscreen, does not work.
I tried to install MAGLD on spl3.03 anyway, and as expected, it did not work.
I myself do have another hd2 that's running android NAND on it, and I already spent 3 days searching the forum but I can find any answer on my problem. I'm running out of option and dont know what to do next.
Please help
ps: I forgot to click on the "is this a question thread", but I think it's a question thread
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
News Hound said:
OK so here goes,
I was trying to flash my HD2 with the latest ROM for my region using the SD card method as the USB port is not working, it will charge the phone but does not sync with the pc.
All was going well with the flash when all of a sudden the screen went black and since then I've had the following..
When I turn it on I get the triangle with the exclamation mark.
Click to expand...
Click to collapse
wrong rom for that phone. Needs to match operator too,(assuming its from an operator) and just cos the sim may be unlocked the rom is always locked. Flashing from SD removed hspl so now the rom checks fail.
If I try to go into the bootloader I get the RGBW screen with
RUUNBH
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
then I get the white screen with
loading......
almost immediately I then get
00028002
Not allow
and then it goes back to the RGBW screen with the same information as before
Please Help!!!!
Click to expand...
Click to collapse
Goes to loading cos leoimg is still on SD card. Since you don't have USB, you can now no longer flash hspl, so only sspl, so only winmo cooked roms, and no radio changes. Unlucky.
Is it bricked or is there a way of getting it to work again?
If I can get it back to some form of a functional phone 'er indoors will gladly use it.
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
samsamuel said:
Sure, find the right rom, example a German phone from o2 requires the 'o2 de' rom,, an unbranded one (from carphone warehouse for instance) would use the 'HTC wwe" rom.. etc etc.
Once you figure out which rom you need look for a 3.14 version and flash it.
Don't panic if you get what you got this time, that exclamation,just means you got the wrong rom. Try another one
(Edit - I was gonna mention SSPL but just remembered that it needs USB so your option is as above.... correct stock rom)
Click to expand...
Click to collapse
This solution doesn't appear to work, I've tried every UK version of 3.14 from the HTC website and I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) all to no avail.
News Hound said:
I've even tried the original 1.66.405.2 (all versions, obviously trying the WWE one first) (
Click to expand...
Click to collapse
ALL 1.66 roms are unbranded, the branded 1.66 roms are version 1.72, so you haven't tried any operator branded 1.66 roms.
hi all, I hard formatted my windows phone 6.5, HTC HD2 and started setup for HSPL3 For HTC Leo. The setup started and failed and i'm stuck with it now. it gives me screen
HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
and when i start phone power+volume down with leoimg.nbh in SD card the screen says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
Micro(TOUCH) 0x40
Upgrade ROM code error. please try again
Serial.
Please help!!!
Common issue:
You still have standard SPL installed & thus require a ROM that is correct ROM code of original country/operator which the one on your SD card is not hence "Upgrade ROM code error"
Your 2 options are:
1. Use HSPL 3 or 4 to install a HSPL which bypasses CID lock & allows you to flash any ROM but by USB & RUU, if do from SD it overwrites HSPL with SPL everytime
2. Find a compatable CID code ROM & flash it ...
If this is a T-Mobile USA handset make sure to flash a ROM with correct radio or you will have a brick ...
Mister B said:
If this is a T-Mobile USA handset .
Click to expand...
Click to collapse
it cant possibly be a tmous with 1.42.0000 spl.
@OP, you are in the wrong forum, this is for tmo usa model hd2 only. (That's why there's so few recent posts, , , most tmous users are now in the android forums.
With the phone in the stripey screen (bootloader) connect usb, , when 'serial' changes to 'usb' you are ready to try running hspl again. What are you aiming for? if its android, (meaning your target is 2.08.hspl) use HSPL2 instead.