Related
First, please, I tried tons of different things. I'm a linux kernel hacker too, although I never hacked android related stuff yet.
When I try to turn the phone on, it just quickly blinks the green line, vibrate and nothing else happens.
It was running firmware version 1.6 fine until I tried to upgrade the phone using a windows xp running in a vmware VM. I tried companion, SEUS and FlashTools. All left the phone running with the yellow exclamation mark after.
I continue trying to flash it until suddenly even the exclamation mark stopped showing up.
After that I moved to a native windows installation and SEUS went all the way through updating the phone, but the phone never turned on again. It just happened what I described above.
I already tried everything I came across with in the forums: flashing versions 2.1 and 1.6 from different places, with different versions of the FlashTool, and SEUS, and the companion .... it always goes all the way through, saying all ok, but when I turn on the phone: same-o. just quickly blinks, vibrate and dies.
Any idea? had I really hard broken my phone?
Please, any direction would do.
Interestingly - I have excatly the same situation with my partners phone. Attempted to downgrade to 1.6 using a couple of methods - editing build.prop and then SEUS and flashing this firmware.
Problem I have now is SEUS says I have the latest firmware and doesn't offer an update - I guess this is because the version of the software that is installed is higher than what is currently avaiable to the CDA I have put in the build.prop
Next I tried putting 2.1 back on from this thread.
The phone will not boot still it does excatly what you have said - blinks, vibrates and then turns off!
Thank you for the reply. It is good to know Im not alone
In my case SEUS always says there is a newer version and flashes the phone. It goes all the way to the end and says the upgrading was successful.
Would it be possible that although the phone "accepts" being flashed, it is not actually writting anything to a persistent state?
Is there a way to verify if what I flashed is really there? Otherwise SEUS should way nothing to upgrade, since it already did it all the way through successful.
easy question:
are you sure you have battery remaining to start it up and flash? if not, try to charge the battery on another phone.
I guess so.
I'm using a multimeter to measure the power of the battery, which varies from 3.6 to 4.1 volts, depending on how long I leave it on the charger.
So although the phone gives no indication of being charged, I guess that measure is enough to say it is being charged, right?
I've even just tried Omnius Server, which flashed perfectly fine, but still the phone won't boot Its completely dead now
Yep. I also tried that. Wasted money..
So far no change.. the thing is still a brick.
.. well, a brick is at least heavy enough to actually deal some damage when thrown..
Hah Just getting it exchanged now - tried everything - given up!
well, just in case you have it on warranty, go ahead
take it to the shop
repair
stop wasting time and money... go to a GSM SERVICE... you need service tool to revive your phone if it's deadboot...
i use setool to flash sony-ericsson phones and it's the best flash tool...
if it's bootfcked, then you need jtag's...
@sanyyous
setool will flash the phone just like SEUS or FlashTool will, right? or it will do some other kind of flashing witchery?
and jtag you mean hardware debug and service, right?
the issue is: I bought the phone in London and I'm in Brazil now. So either I fix or I see a trash bin in this little x10's fate.
setool flashes the same way than my tool,but it has more tricks afterwards for some other things.
For me it sounds like :
1.) False USB-Port or Cable
2.) False nand
Please try to following:
Go into your car with a laptop and flashtool on it -> Start the engine and pull down the AC to the coldest state it can do.
hold your phone DIRECTLY with the battery in Front of the cold airstream.
Flash it now
I have recovered a few dead phones so, the problem is that they get too hot and the nand shows errors while temporary placing the flashimages -> If so the loader rejects the image because of checksum fail.
-> Give it a try, if it don't work you have to send it to service.
Regards
Bin4ry
Man.. I will try as soon as I get home... and if it works.. expect a good donation.
Out of curiosity - did it work?
Sent from my X10i using Tapatalk
I still couldnt try.
In Italy now. I'm going back to Brazil only Feb 3rd.
Meanwhile I'm trying to convince my gf that she couldnt break the phone even further for trying. Hopefully I'll lure her into doing it until this weekend.
Firgers crossed.
Bin4ry said:
setool flashes the same way than my tool,but it has more tricks afterwards for some other things.
For me it sounds like :
1.) False USB-Port or Cable
2.) False nand
Please try to following:
Go into your car with a laptop and flashtool on it -> Start the engine and pull down the AC to the coldest state it can do.
hold your phone DIRECTLY with the battery in Front of the cold airstream.
Flash it now
I have recovered a few dead phones so, the problem is that they get too hot and the nand shows errors while temporary placing the flashimages -> If so the loader rejects the image because of checksum fail.
-> Give it a try, if it don't work you have to send it to service.
Regards
Bin4ry
Click to expand...
Click to collapse
If this works, it's a miracle.
Maybe trying the fridge would have the same result, but all that ice could damage the phone .
Good luck and I really want to know if it works.
Yeah, on the fridge the moisture would probably ruin the phone even further. .. if thats at all possible.
And believe me, no one would wanna see if it works more than me.
<girlfriend-apeal>
you see, everyone wants to know if that works. please, you wont ruin the phone further just by trying it )
</girlfriend-apeal>
My wife's x10 is OK, so it would just be out of curiosity for me .
Good luck.
I got my gf to try but it didnt work
I'll try it myself when I get home next week, but I dont think thats gonna work..
Anyway, I drop by next week to comment on the final status.
Thanks for the replies so far.
fabioroger said:
First, please, I tried tons of different things. I'm a linux kernel hacker too, although I never hacked android related stuff yet.
When I try to turn the phone on, it just quickly blinks the green line, vibrate and nothing else happens.
It was running firmware version 1.6 fine until I tried to upgrade the phone using a windows xp running in a vmware VM. I tried companion, SEUS and FlashTools. All left the phone running with the yellow exclamation mark after.
I continue trying to flash it until suddenly even the exclamation mark stopped showing up.
After that I moved to a native windows installation and SEUS went all the way through updating the phone, but the phone never turned on again. It just happened what I described above.
I already tried everything I came across with in the forums: flashing versions 2.1 and 1.6 from different places, with different versions of the FlashTool, and SEUS, and the companion .... it always goes all the way through, saying all ok, but when I turn on the phone: same-o. just quickly blinks, vibrate and dies.
Any idea? had I really hard broken my phone?
Please, any direction would do.
Click to expand...
Click to collapse
i tried to install the gingerbread theme but after i moved the framework file into system/framework folder my phone rebooted by itself and blocked to SE logo screen.... i wanna flash the phone but i'm unable to switch usb debugging mode on..... any suggestions to turn the usb debugging on or flash the phone witout it....???? tnx in advance 4 any suggestion
Hey guys
So, i decided to try and root my phone and i think i cleverly chose to use a really old method and subsequently my phone is now pretty much bricked. It used to be software V2.1
now, whenever i turn it on (I need to take out the battery and put it back in to restart it) It goes to the sony ericsson splash screen, then a "MTT Docomo" screen and then the screen turns blank and stays like that. I got halfway through a guide i found somewhere on the internet and now this is happening D=
I can't repair it in the sony ericsson pc suite (it detects a phone but asks me to connect it etc. which i can't do).
I've read a bit around and i think the answer is using flashtools? Can i still do that when my phone's in this state? Sorry if this is a common question, couldn't find any similar cases though =S I'm not completely sure what to do... any suggestions?
Thanks!
yes, you're right, my opinion is you must have to flash your phone properly with a clean stock rom before retry to flashing your phone another time.
And to make it properly is to use flashtools method (see thit link : http://forum.xda-developers.com/showthread.php?t=928343, there is a perfect tuto made for that)
And you could also use the root function included in Flashtool if you still want to root your phone
You should still be able to repair w/SEUS ("pc suite") or use flashtool.
X10 is pretty unbrickable.
To get into flash mode in your phone's current state take out the battery, connect the usb, hold the back button, and then replace the battery.
Hope this helps.
Sent from my X10a using XDA App
Hey guys, thanks for the replies!
I went through the flashing guide above and managed to get my phone working again (you were right, i could still start it up in flash mode if i took out the battery etc. first), and rooting it was pretty easy =)
Thanks again guys, the forum's a great resource.
AyDee said:
You should still be able to repair w/SEUS ("pc suite") or use flashtool.
X10 is pretty unbrickable.
To get into flash mode in your phone's current state take out the battery, connect the usb, hold the back button, and then replace the battery.
Hope this helps.
Sent from my X10a using XDA App
Click to expand...
Click to collapse
you just saved my bacon mate. got an xperia play but decided to have a play about with unlocking the bootloader on my old x10. needless to say i cocked up and bricked the phone. followed your post and finally managed to get flashtool to sort it. many thanks
tom
Hi,
Ive a few bugs using this Rom,and hoping someone knows the answers.....
Im using 2.6.29n-1 kernel and my phone is an X10i
1.cant view google street view=getting force close error
2.occasionally get thrown off t-mobile network,and when I do,the option
to choose a network has disappeared in the mobile network settings.I
can only choose something when yellow triangle appears at top of screen bar.
3.my phone is an X10i,the model is now listed as SO-01C.Which model do I treat the
phone as,Im having trouble with drivers for computer,and cant pass apps from
pc to phone via market as it says I dont have a recognized device
Apart from these bugs-I like it
the n1 kernel sucks, i get the same errors like you, and the batery drain is massive... flash doomkernel v6 everything works fine here, and batery life is far better....
Thanks Patrik,I had to reflash everything and Ive put Galaxy rom with stock kernel back on.I had the bootloader unlocked,but now its locked.
Does anyone know if Ive got to install xrecovery as an app,as well as through rooting.I cant seem to unlock the bootloader,it just hangs when I try it.When I try to install xrecovery as an app,sometimes I get the green ticks,but mostly I get the red circle presumably meaning its not worked.
This may be stopping the final bit of the bootloader getting unlocker as the phone is still recognized?
for the SO-O1C part, it has something to do with the build.prop. ask other pros out there on how to change the build.prop from SO-O1C to X10i
how do I restore my phone to stock using SEUS or PCC from this ROM? My phone has some kind of locked itself, SEUS and PCc keep telling me that there is no update for my phone. I just want to restore it ffs.
What to do?
Model: SO-01C
Running: ThGo2_v14.0_Th_Kernel
Baseband: 2.1.71
Kernel-Version: 2.6.29-n1
You want to repair it using se suite.Mines had the same problem and eventually it started the repair and it loaded the stock stuff.Then I stuck on the Galaxy rom,but I wouldnt advise anyone to use that as the thread started a year ago and several links are dead and its impossible to suss out which rom to load first.
theunderling said:
Hi,
Ive a few bugs using this Rom,and hoping someone knows the answers.....
Im using 2.6.29n-1 kernel and my phone is an X10i
1.cant view google street view=getting force close error
2.occasionally get thrown off t-mobile network,and when I do,the option
to choose a network has disappeared in the mobile network settings.I
can only choose something when yellow triangle appears at top of screen bar.
3.my phone is an X10i,the model is now listed as SO-01C.Which model do I treat the
phone as,Im having trouble with drivers for computer,and cant pass apps from
pc to phone via market as it says I dont have a recognized device
Apart from these bugs-I like it
Click to expand...
Click to collapse
1. Unisntall maps and street view from system using any root app. Reinstall map an street view from market.
If you face same problem, clear data in settings, application section.
2. It may be a network issue.
3. Open build.prop using root explorer. Edit the following :
ro.product.model=so01c
ro.product.model=X10i
Or
Flash the generic build.prop from thjaps thread.
________________________________________
CheerS!
Milton
(*^__^*)
From Sony Ericsson Xperia™(locked bootloader)(thKernel) on "FeraLab v6.0"
using XDA premium
" HiT ThAnKs If I'm NiCe To YoU! "
Thanks milton,but Ive had enough.Im running galaxy rom with stock kernel and locked bootloader-it works and Im keeping it at that.
Anything else I try to do is a complete disaster.
Im not on here to criticise anything,but Im not going to read 1000 posts then switch to Doomkernel v06,only to find theres a problem that needs my phone to be put back on stock stuff.Then find I cant restore the stuff I backed up with Titanium pro,because system has changed from the system that was backed up.
Funnily enough,the week Ive spent reading stuff and trying it,I could have worked and got the cash to buy a Sumsung Galaxy S2.
Thanks to the people that tried to help and replied,and good luck everyone....youll certainly need it.
Here is what i use,and something more....
1.suggest us doomkernel v6,is really good with ThGo2 rom
2.i upload my build.prop file which i already change to X10iView attachment build.rar
3.don't know if you already fing there is a white line under miui player and i fix it file is attachedView attachment 901170
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
You said the button still lights up? can you get into recovery? if so just wipe system and install a rom! and try flashing a kernel with flashtool!!!!
RE: Blank Screen After Flashing Custom ROM
Thanx for getting back to me so fast. As I said, the screen is blank. That is, the backlit display works but I can see nothing else. The "Home" button lights up when i press it but the display does nothing. If/When I reboot to try to enter XRecovery, I see the SonyEricsson logo followed by the backlit screen & nothing else. The Volume up/down buttons work as I am able to silence the phone by turning volume all the way down to vibrate. Because I cannot see what's on the display, I cannot turn USB on/off to connect to PC to run SEUS/Flashtool, etc. I.E. I cannot fix the device. Usually I just boot into XRecovery to fix a problem like this but that doesn't work.
x10
hy, install sony update service and repair your phone, then install again custom rom, the indications how to repair your phone software is in the program.
Best regards
Does USB need to be On or Off on the device for Update Service to run?
daRican! said:
Does USB need to be On or Off on the device for Update Service to run?
Click to expand...
Click to collapse
Update says I already have the latest Update installed.
Flash 2.3 off line update
Sent from my Xperia X10 using xda premium
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
seem like u dont have a launcher...install launcher throuh flashtool
lilinbakar said:
seem like u dont have a launcher...install launcher throuh flashtool
Click to expand...
Click to collapse
I wish I had gotten this solution sooner. Not sure if it would have mattered. When trying to use Flashtool I kept getting an error saying my phone was not in "flash mode".
I solved my problem by flashing using Omnius & flashing firmware 'X10i_generic_SE_24_MultiTouch.rar'. This got my phone back but it was only 2.1 so I used 'DooMLoRD_v4_ROOT-zergRush-busybox-su' to get me back to 2.3, but this is where I'm at. I had Wolf's firmware before but right now I have no xRecovery installed. I thought I had rooted my phone but xRecovery isn't installed nor is Busybox.. Any ideas? Thanx in advance...EVERYONE @ XDA-DEVELOPERS rox!
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
daRican! said:
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
Click to expand...
Click to collapse
C if u can repair phone using SEUS now. Open the software without connecting phone. N then go to the update part. It should give u a repair option. Then follow those steps. Or else just connect ur phone n then start software. When it tells u ur phone is up to date click on that n then click on "repair". Then use the latest flashtool to root. Recoveries come with kernels so just flash a custom kernel.
Sent from my Xperia X10 using xda app-developers app
Many Thanks, I was finally able to use SEUS; before I could not. I used Flashtool to upgrade/downgrade kernel. However, I still don't have XRecovery installed & I'm not sure how to do this. I can't install XRecovery using Flashtool. Any help would be greatly appreciated. I would really like to install a custom Rom again.
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
I'm Back, Baby!
AdX9170 said:
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
daRican! said:
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
Click to expand...
Click to collapse
Ur welcome i don't think u need help you just flashed a custom ROM.. the procedure for installing ICS is the same. Although it'd be better if you are on stock before installing it.. just look for an ICS ROM that u like (I'm using feralab n it works like a charm).
Get the kernel n ROM.. as usual, put the ROM zip on ur SD card, flash the kernel, install ROM from recovery
Although before installing:
1. In recovery go to mounts n storage
2. Format system data n cache
3. Mount system, data n cache (note that if the mounting is successful the options should change to unmount system, unmount data, unmount cache respectively)
4. Then install ROM
5. The installer is GUI based so it'll guide u really well through the installation
Sent from my Xperia X10 using xda app-developers app
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
your LCD flexibel not improperly installed or detached, just open your x10 with screwdriver, and plug it in again your LCD flexible socket.
Iam sory if my english bad
Since I flashed my rom.My phone comes on but I can see anything, even when starting I can't see anything...
I really need help..
I will appreciate if you help me sort it out.
Hello there everyone,
I have been having troubles with third-party apps and modules lately, so I decided to downgrade my software version from RMX2151_11_A_91 back to RMX2151_11_A_88 because I nnoticed after upgrade troubles was getting more often. Anyway I did not have to do that on my own. Something went wrong and I got stuck seeing only REALME and below written few words and error CODE: 0x99256658.
I can not get into bootloader, fastboot not even able to get into ADB transfer...Someone please can help me out with this awful situation? I tried using SP flash tool even I flashed everything with happy ending GREEN thing on the screen, but when I rebooted device same thing happened and got stucked.
I did try and it went well to flash software using SP flash tool after many tries it brough green sign at the end, but NO LUCK bringing back to life, just screen shows REALME and below tiny little words within 60 second will turn off my device. When I untick those 4 things when you flashing is ok till the END and sign is green, but If I tick opposerve2.img right from the start shows DOWNLOAD SIGNED IMAGE or DISABLE VERIFY BOOT..
Just tell me guys is there any chance to bring it back to life or throw it away. No big deal. Just Chance or NOT.
Thank you very much
RobertoSt25 said:
Hello there everyone,
I have been having troubles with third-party apps and modules lately, so I decided to downgrade my software version from RMX2151_11_A_91 back to RMX2151_11_A_88 because I nnoticed after upgrade troubles was getting more often. Anyway I did not have to do that on my own. Something went wrong and I got stuck seeing only REALME and below written few words and error CODE: 0x99256658.
I can not get into bootloader, fastboot not even able to get into ADB transfer...Someone please can help me out with this awful situation? I tried using SP flash tool even I flashed everything with happy ending GREEN thing on the screen, but when I rebooted device same thing happened and got stucked.
I did try and it went well to flash software using SP flash tool after many tries it brough green sign at the end, but NO LUCK bringing back to life, just screen shows REALME and below tiny little words within 60 second will turn off my device. When I untick those 4 things when you flashing is ok till the END and sign is green, but If I tick opposerve2.img right from the start shows DOWNLOAD SIGNED IMAGE or DISABLE VERIFY BOOT..
Just tell me guys is there any chance to bring it back to life or throw it away. No big deal. Just Chance or NOT.
Thank you very much
Click to expand...
Click to collapse
Try this maybe? Maybe I should've checked on Google first before recommending a forum-post, haha.
Thanks bro, I dwnld and tried and registered and can not log in and try app...
RobertoSt25 said:
Thanks bro, I dwnld and tried and registered and can not log in and try app...
Click to expand...
Click to collapse
Just Google the error code while you wait for someone to reply to the thread with a fix. Who knows? Maybe you'll find a solution that way. If you do, please, post it here so that anyone with the same issue can fix their phone, too.