I installed today this http://forum.xda-developers.com/showthread.php?t=865580
It was good rebooted with Xrecovery after install and it did work. Now I wanted to shutdown my phone when i turened it on i get this:
my x10 it gets the Sony Ericsson then the boot screen of this mod: http://forum.xda-developers.com/showthread.php?t=865580 and thats it.
PC Companion does not work please HELP!!!!
PlayGunsta said:
I installed today this http://forum.xda-developers.com/showthread.php?t=865580
It was good rebooted with Xrecovery after install and it did work. Now I wanted to shutdown my phone when i turened it on i get this:
my x10 it gets the Sony Ericsson then the boot screen of this mod: http://forum.xda-developers.com/showthread.php?t=865580 and thats it.
PC Companion does not work please HELP!!!!
Click to expand...
Click to collapse
reinstall through SEUS?!
not sure but will agree with the other post, reinstall via SEUS and if you don't want to get rid of eternity just take off the battery that has to restart it
Related
I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App
earlier today, i was downloading some stuffs from market thru wifi..somehow my mini couldn't install the apps on my phone, so i thought a reboot would solve the prob..and so i did..
and guess wat? my mini goes into more prob as it's stuck in reboot loop!!
i reflashed everything and recovered using recovery..but everytime i do that it'll go into reboot loop..weirdly enough fresh stock SE works fine
any idea why??
recovery was fine before... :/
Hey!
I have a very similar problem. My X10 Mini goes on a boot loop right after It shows the Sony Ericsson text.
I I'm trying to use the PC companion for repair but I get a error on It
solution
disasembly your mini, and unplug the battery.
http://www.youtube.com/watch?v=iyT618lVxUs
Hey guys
Didnt find same issue for Sony Ericsson x10 mini
My problem:
I rooted my x10 mini android 2.1 to 2.3 CyanogenMod 7.0 with this version my SD card didnt work. Then tried CyanogenMod 7.9, after restart theres only Sony Ericsson logo on the screen, then I disconnectied battery and phone went to clockworkmode. From there I cant do anything. I have tried to restore( no files ) and then reinstall android but installation was aborted. when I reboot my phone then logo stays.
something happened, riht now only Sony Ericsson logo on the screen. clockworkmode does not work anymore!
I hope somebody can help me out. Its my first Android and im new at this.
Sorry for my bad english.
Donwload Sony Ericsson Update Service.
Turn the phone off. wait 5secs, hold the back key and plug it it in with SEUS open. it should prompt you to repair. you will go back to stock Android 2.1, after that reflash.
DamDSx said:
Donwload Sony Ericsson Update Service.
Turn the phone off. wait 5secs, hold the back key and plug it it in with SEUS open. it should prompt you to repair. you will go back to stock Android 2.1, after that reflash.
Click to expand...
Click to collapse
Thanks a lot
i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!
pshay8 said:
i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!
Click to expand...
Click to collapse
no vibrate when turn it on??
no green led while get into flash mode??
It we call hardbrick...
find any workshop with JTAG cable
if u can see SE white logo..
that mean u can try SE PCC first..
vibrate yes
green led yes
and he stuck in this white logo
do you mean pc companion? tryd it also. not working
Do you have Xrecoivery or CWM installed? If yes, you have to mount the SD card for Pc companion recognizes your phone..!
icerebro said:
Do you have Xrecoivery or CWM installed? If yes, you have to mount the SD card for Pc companion recognizes your phone..!
Click to expand...
Click to collapse
yeah, i'm also stuck in this process~~~who can help us!!!!!!! I cannot go through the PCC cos it kept asking me to mount the sd card~but I cannot log into the phone system...
No bro, he meant to use CWM or Xrecovery and use it to mount usb. there is an option if you enter mounts and storage --> mount USB storage in cwm. i am not sure about xrecovery
Please please, dont panic, if you get tension then you wont concentrate on the matter you are doing. Relax!
Tommylee567 said:
No bro, he meant to use CWM or Xrecovery and use it to mount usb. there is an option if you enter mounts and storage --> mount USB storage in cwm. i am not sure about xrecovery
Please please, dont panic, if you get tension then you wont concentrate on the matter you are doing. Relax!
Click to expand...
Click to collapse
cheers mate! just figured out how to use FlashTool to solve the problem~ now my lil mini is back to normal~~
was following these instruction: http://forum.xda-developers.com/showpost.php?p=17674938&postcount=3360
help plszz
nelikp said:
no vibrate when turn it on??
no green led while get into flash mode??
It we call hardbrick...
find any workshop with JTAG cable
if u can see SE white logo..
that mean u can try SE PCC first..
Click to expand...
Click to collapse
hey frnd the same problem is wid me i installed Shin Engine™ Feat Rieska Nico Robin dis rom and now i bricked my my phn i guess no exrecovery working nothing working when i start my phone it justs vibrate and stucks on logo of SE even phn is not getting charged and no led lights i didnt flashed the kernel which was required for using dis rom plszz help me some one plsz....
pshay8 said:
i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!
Click to expand...
Click to collapse
i think this
http://forum.xda-developers.com/showthread.php?t=749438
Soft Bricked ma se w8
plsz can any one help me how to solve this problem plsz
Hi guys, 1st u should try to clean everything, like wipe all things. then try to reboot. If u cant make it work, try to flash other ROM. if u it is still the same, the last thing u can do is, repair it using pc companion. u will get the fresh stock firmware from S.E.
p/s But make sure u read all the installation guide if u want to install custom ROM or flash a custom Kernel.
I think in case when you are stuck with the sony logo there s no need to turn on usb debugging options coz i just did get stuck like that. connected it in flash mode { the green light} and then flashed a global ftf and it worked...
I think the problem when you get stuck in the logo is because the rom was not installed correctly, happened to me once and just doing the download again and installing the rom without flashing the kernel solved the problem
HELP! after installing viper rom to my xperia ray i got stuck on sony logo =/
Hi!
I have a big problem that was caused by my own stupidity. I tried updating my phone to CM9, but I didn't install the nAa kernel first. What I have now is a phone that is completely useless. I can't enter CMW recovery, the phone doesn't stay in flashmode, it does enter, but then it just proceeds to the bootscreen with the Sony Ericsson logo. From there, I can't enter recovery, and I can't even turn off the damn thing.
So basically I can't recover my previous firmware, I can't reflash the phone, I can't do anything! Please, help!
Thanks in advance!
Clewer
Well, I tried a gazillion times, and I was finally able to enter SEUS, and start updating, I'll update you guys on the progress!
clewer said:
Well, I tried a gazillion times, and I was finally able to enter SEUS, and start updating, I'll update you guys on the progress!
Click to expand...
Click to collapse
It should work with SEUS or the repair option in pc companion. good luck