i have a hd2 that wont turn on,only when i connect d charger it comes on then it wont boot pass the white screen because it turn off,then comes back on n the same thing happen over n over.i manage 2 do a hard reset but it didnt help.also i tried holding down d vol key n the end key n i see a red,green,blue n white screen that display:
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X50
please help me
i would flash a new rom but make sure you have the right radio flashed for it first if not try a stock rom and flash from SD card and start from fresh
Right radio version is very important. Your HD2 is a TMOUS model, they need a radio rom that's compatible with 576MB RAM.
A good place for compatible radio's would be this thread.
Edit:
If I remember correctly, issues with wrong radio/rom shouldn't normally cause the phone to reboot by itself. Might be worthwhile to check your battery pins, to see if any might not be making a proper connection.
Related
Hi. I have read a few post's about this but nothing have helped me.
I got it from a friend last night because when u turn it on, it vibrates, and then te screen turns white. The phone has not been upgraded with rom, radio etc.
A so called "original" phone.
I have tryed to flash it with hspl, hspl 2 and so on, but nothing works. I can push the volume buttons and the power button and get to the three color menu, and when i put it in the usb it shows on the screen also, but i cant get anything from it.
Anyone having this problem?! On a "original" phone?!
Info on three-color menu :
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
BR
Vegar
you cant even flash hspl when you're in bootloader? (tricolorscreen)
if so, i would bring it back to the store where you bought it.
they'll see, that everythings untouched on it.
DN41
Can't install hspl even in three-color. Belive me, I have tried many times
Can't return it to the shop either, because it was bought it China
So is it a lost case?
When i tryed to update to : RUU_Leo_HTC_NOR_1.48.409.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
When I come to the : Confirm that u want to update Rom - version :
From:
To:
Pictureversion : 1.48.209.1
Nothing come's up on the "From rom version"
Anybody ?
Okay i have been going at this for 6 hours trying to figure this out.
I bought a HTC HD2 off of craigslist today for 200$ when the person gave me the phone to try it worked i played around with it and about 20 mins after i started messing with it ( the transaction had been made) it just shuts off. I go to turn it back on and it gets hung on the Stick Together screen after hard resets soft resets lukewarm resets.. every reset on the web nothing works i tried updating it nothing worked (from official firmware)
in the middle of all this it gets to a point where the stick together screen would be there for a split second going blank and the phone would vibrate 7 times.. no one knows what this means even HTC
i look online and people are saying install custom firmware sooo i downgrade from 2.10.0000 to 2.08.0000 and install a custom firmwar Kumar v4.1 touch premium with thier recomended Radio file.. i do this about 3 times.. now instead of "Stuck together" its stuck on the custom flash splash screen.
i tried the task 29 and doing it all over again and im still stuck
HOW DO I FIX THIS? did i just spend $200 on a peice of $#!7 paper weight?
any advice would be helpful.. though "search the thread noob" wont be applicable to me .. i searched it for a few hours to no avail.
if i missed the page please direct me to it instead of being snide about it chewing me out for spam post wont help me fix my problem
Set your device into Bootloader
- turn off device
- press and hold volume down button
- pres shortly on the power button
- you will see now a 4 color screen = bootloader
=> can you communicate us the values you see on your bootloader screen.
And just a question, witch Radio did you install?
PB81120 SS-B3
SPL-2.08HSPL 8G XE
0x05
Cotullahspl 0x50
as for the radio:
Radio Leo 2.15.50.14
therian12 said:
PB81120 SS-B3
SPL-2.08HSPL 8G XE
0x05
Cotullahspl 0x50
as for the radio:
Radio Leo 2.15.50.14
Click to expand...
Click to collapse
I don't see direct reasons of problems based on this information.
Maybe a suggestion is to install a newer stock rom.
that was the first thing i tried when i first got the phone, when that didnt fix it i resorted to installing custom firmware.. right after i went on the forum and posetd i installed artemis custom fw and left the battery out over night and when i woke up i put the battery back in and it worked perfectly.. well almost.. it booted up none of the programs would work no camera no game nothing it always said either program wasnt set up or there wasnt enough memory on the phone. so i turned it off ( huge mistake) and put the most recent stock firmware on it after reverting the HSPL back into the SPL 2.08.0000 and its stuck on the stick together screen again
Can you get it into BootLoader Mode, as I suspect that the SPL is still 3.03.0000
You cannot use HSPL3 when you have a 3.03.0000 SPL on the phone.
What stock ROM are you trying to flash?
T-Mobile_HD2_MR_Software_3.14.531.1
thats the name of the file i downloaded to do it .. i reinstalled the stock SPL and tried upgrading it to the file ^^^^ left the battery out for 30 mins plugged it all in , it booted does alot of stuff but when i touch the camera button it froze shut down and locked me out again at the Stuck together screen.
im willing to donate 30$ to whoever can help me fix this
i have more info about the crashes and whatnot
today i have been keeping a record of how long the phone is on for and what im doing when it crashes and wont reboot without keepign the battery out for 15+ minutes
turning vibration on for ringer was only on for 5 mins
using the camera not even taking a picture just looking through the lense on for about 15 mins
trying to send a text message on for about 10 mins
just now had one whil just letting it sit there after 15 mins
i have still been browsing the forums for solutions im thinking it could be the radio file im using that futzing up so ima try that
also .. WTF does MTTY actualy mean .. is it a more formatting formatting utility .. or.. what?
Okay so i updated the radio to Leo_RADIO_2.15.50.14
and now when i turn on the phone it vibrates 7 times with no image
if i leave the battery out for 15+ minutes it boots up just fine till i start to actualy use it. i can play a video listen to a song but i turn off data and then turn on wifi and it locked up on me, only way to get it to turn back on is to pull the battery and let it sit for 15+ minutes again.
soo no one has any idea on whats going on wrong here?
sorry for posting so many times.. i just am without phone and it sucks
try to install artemis rom again with sspl
sspl thats stock spl right?
my phone is at 2.10.0000
therian12 said:
sspl thats stock spl right?
my phone is at 2.10.0000
Click to expand...
Click to collapse
no sorry install latest stock rom thn you should have spl3.03.00
after that you shoul be able to flash artemis with sspl becouse you cant flash on 3.03.00 thats why we use sspl if you dont have it i can sent it to you
i just install stock SPL package from tmobile's website when i enter boot loader it says my SPL version is still
SPL-2.10.0000 8g XE
therian12 said:
i just install stock SPL package from tmobile's website when i enter boot loader it says my SPL version is still
SPL-2.10.0000 8g XE
Click to expand...
Click to collapse
try to flash spl1.42 with hspl3pkg and bthen try to flash artemis rom
how do i do that?
well all this trouble for nothing... after installing the Energy rom i wanted to try and install the stock rom again , converted the HSPL 2.08 back to stock went to put the phone back in bootloader mode and its a brick...
try to contact this member maybe he can help you
you should contact the member of this forum by the name of trashcan... he is the only person in the united states that has the jtag device used to re program the hd2
I bought T-mobile Htc hd2. I tried to flash it but now when I go to bootloader screen It is written "Upgrade ROM code error Please try again". Also It is
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
I am new whis all of this, read a lot of in here, but I dont now what to do. What rom should I try to install firstly? And how? Maybe someone could help? Please...
sounds like the flash failed, shame you didn't include the full name of what you tried to flash, now we'll all just have to guess, and so wont be able to help quite as well.
Easy recover.
get tmobile rom from
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo2
use the sd card method to flash it.
I tried to flash to v 2.10.531.0, it was succesfull, but the problem with radio started when i tried to flash to v 3.14. What would you sugest me to do? I installed radio 2.08.50... and mgldr 1.13, just when i try to go to menu it doesnt show, only when turn of the phone for sometime. After that i managed to flash DL.Desire.v4.31.44.12 over mgldr, but again it doesnt start after i force to start over mgldr menu it loads until "Load done!" and the "1E FATAL HIT 1" shows up. I dont understand what to do now.
ahh well in that case im sorry to say it sounds more like either hardware or low level microcode or perhaps stuck radio (Look out for radio_rsa fail when flashign from sd card) problems.
My advice would be to get a stock tmous rom and flash it from SD card, and fingers crossed its something that just fixes itself.
Does v 2.13.513.1 will be good to do that?
Sure, , , , ,
Ok, i just flashed to v 2.13.531.1 succesfully, but it stuck on screen "stick together". Maybe someone nows what can i do next? I think that its problem with hardware. Because it was android when i bought it and after i did hard reset in android it did not boot anymore, so maybe something happened with hardware? So what only solution will be to take it to service?
Hey everyone.
Listen here is my problem. i installed android on my hd2 and after a day it gave me quite alot of issues like apps crashing . phone applications not working.
So i decided to take it back to windows 6.5.
I used the method of putting a nbh file in the SD card. of spl version 3.03.000. if was updating and then at once it stopped and said update failed. And since then its not starting its on the RED GREEN BLUE AND WHITE screen :/
it says
HX-BC
SPL-3.03.000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
PLease help me what to do. i have no logo on my phone. all i get is a pink circle when i turn it on, so i dont knw whether i used the correct rom or not
SO please i need urgent help..
what rom did you flash? full filename please
do you have a tmous or a regular hd2? (what colour are the send and end keys)
anyway, , in bootloader, where you have copied down the text, , is the top line above HX-BC really blank?
samsamuel said:
what rom did you flash? full filename please
do you have a tmous or a regular hd2? (what colour are the send and end keys)
anyway, , in bootloader, where you have copied down the text, , is the top line above HX-BC really blank?
Click to expand...
Click to collapse
Thanks for the reply.. but i found the problem i was using an unbranded Rom .. but mine was a tmobile. since there was no logo on it i got a bit confused.
i have HTC HD2(made in china)
when i press power On Button then show( software update failed please try again)
when i turn on it on flashing mode in color (red greeen blue and white) then it shows.
PB81100 SS-BC
SPL-2.08.0000 8g XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
what i have to do now please help.
depends what you want to do. looks to me as if it has been flashed from sd with a tmous stock rom, which has loaded 2.08.0000 which has then said 'this isn't a tmous' and given your error.
lets say you want to move to android
into bootloader
hspl4 --> 2.08.hspl (not 2.08.0000)
bootloader
flash magldr
magldr menu - usb flasher
use nand toolkit to set system partition size
magldr menu - 8 ad recovery
instal zip from sd card - choose zip - point it at whatever android rom you want to instal (zip on your sd card)
done/
also, you posted in the wrong section, prepare to be lambasted.
Please help again
i can change only hspl only as per below.
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
i want window 6.5 only not any thing . please help........
serial # is SH08PNW01126
made in china.
please help....
get any 3.14 winmo 6.5 rom.
put phone in bootloader, connect usb lead.
run hspl4
in the dropdown choose 3.03.hspl
when phone reboots, go again into bootloader
run the 3.14 rom.exe installaler.
done.
please help...
Thanks my dear for help me
but now i am facing a different problem .
my dear i have done it.
run into boot loader
run SPL4 and from filter SPL3.00 HSPL
Restrat
again start into boot loader
RUN ( ROM Upgrade for HTC HD2 (O2 UK 3.14.206.1)
it didn't completed.
got error
now turn off and didn't getting ON.
where is the fault.????????
please help.
At what % did you get error?
Explain how it won't boot, no power? Suck on boot screen? Can you enter Bootloader?
please help
1st when is going on into boot loader then during updating ROM it has stop at 8%.
after it got OFF and still not showing any thing. even i checked battery voltage . voltages are ok but leo not ok...
but from couple of days its not showing charging ' not showing any thing , even its not showing ( software update failed)
not entering in boot loader.
and not showing any thing on original charger.