After upgrade to 2.1 firmware I'm not able to have phone conversations in my car (Renault Megane 3 with Arkamys 3d)
Connecting with bluetooth went ok, but no sound after making phonecalls.
What happened with bluetooth ?
http://forum.xda-developers.com/showthread.php?t=849265
Related
I just upgraded from 3.35 to 3.56 and I am having a problem with bluetooth. With 3.35, I could connect to a device using hands free and the audio would pass through the bluetooth device even if I had a head phone plug into the usb port. With 3.56, if I have a head phone plugged into the usb port then the audio is shunted to the usb port instead of the bluetooth device. (Before someone asks--- I have my car setup to allow me to listen to music from the phone and to also have hands free bluetooth working... NOTE my car's bluetooth doesn't support A2DP).
In other words, is there a registry key that will force bluetooth audio to supersede the usb port so that I can get 3.56 to behave the way 3.35 did?
Thanks
Try the new Radio(3.42.30),I had a few problem with my Plantronics Voyager 855 A2DP BT headset,after my updated to the new radio,the problem seemed go away.
2kmy477 said:
Try the new Radio(3.42.30),I had a few problem with my Plantronics Voyager 855 A2DP BT headset,after my updated to the new radio,the problem seemed go away.
Click to expand...
Click to collapse
I am using the new radio (3.42.30)... I upgraded the radio a few days before I upgraded the ROM. The new radio is a big improvement over the older radio but unfortunately, it isn't related to the problem I'm having. This is a difference in the bluetooth implementation between 3.35 and 3.56 roms... I hope there is a work around otherwise, I will be forced to revert back to 3.35. Oh well....
Thanks
I found the fix!!!
This is the registry key
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AudioPath]
"AudioPathSwitchToWired"=dword:00000000
If AudioPathSwitchToWired = 0 then bluetooth will be the primary output
If AudioPathSwitchToWired = 1 then usb audio will be the primary output (Default setting)
Upgraded ROM yesterday to 1.66.405.2 (76641) WWE tried using my Nokia BH-105 headset, like i have for the past 10 months, but it won't even find it when trying to pair devices.
Any ideas???
Will i need a new headset???
Cheers
Have you put your headset in pairing mode?
Can you test with another bluetooth device (laptop eg), can that device find the headset (when put in pairing mode)?
Hello together,
I have a problem with bluetooth connections:
I'm using a HTC Desire, rooted and flashed with a ROM from Alex-V Android Version 2.3.3 with the 2.6.35.8 Kernel.
I have two bluetooth devices:
MM100 Stereo Headset from Sennheiser
BT-Version: 2.0 + EDR
Protocolls: HSP, HFP, A2ADP, AVRCP
and the Hands free car kit Parrot MK6000
BT-Version: 1.2
Protocolls: HSP, HFP, AADP, AVRCP
I can pair both devices with my Desire and the latest paired device would connect automatically to audiosystem for media and telefone when switched on.
The problem is, that the first paired device would not connect automatically to my desire and when it is connected manually it would only connect to the audiosystem for media not telefone.
I can't force it to connect with audiosystem for telefone. I checked and un-checked the check-boxes for both connections in every combination :-(
Remark: I don't want to connect both devices at the same time. I know that this is not working ;-)
With the original HTC Rom I doesn't had this problem. Both devices would pair and connect perfect.
Does anyone has the same problem, or perhaps a solution for this problem?
Pudl
Hello,
is there no one outside with two Bluetooth Hands free devices?
Does anyone has the same problem?
Pudl
hi
i have an m155 plantronics bluetooth headset which has a specification of bluetooth version 3.
when i use it with my android jellybean 4.1.1 mobile phone ALCATEL 5035E (unrooted) to play music, the music stutters,
drops off, then resumes, then finally drops off completely without resuming, although bluetooth
icon remains blue. i touched the bluetooth icon to disconnect it. the icon
blinks and does not stop.
i brought my mobile phone for service and they replaced my phone with a brand new one. but the same problem occurred.
the technicians said it could be a problem with the bluetooth compatibility with the android jellybean. they said to update my bluetooth device so that it becomes compatible with the android 4.1.1. i was skeptical because i had this vague thought that there is no such thing as updating the software on a bluetooth headset.
i checked on my android device, and the bluetooth version on the mobile phone is 4.1.1-1350
sorry if i sound stupid to ask you guys. but i need to give the technicians an answer so that we can move forward in finding the problem. Your answer will help us go in the right direction.
does the bluetooth headset need to be the same version with the android phone in order for it to function properly?
is there an android update that fixes my issue? if so, how do i get it?
thanks much
Good afternoon.
I got a simple handsfree bluetooth carkit, wich works as a simple bt headset, transfers call audio to car speakers and nothin more, doesnt sync messages nor contacts, just a simple pair&go.
I had a sonyericson x-10 mini pro with android 2.1 that worked just fine, recently i've aquired a bq aquaris 5hd with jelly bean 4.2.1, and i cant get bluetooth to stay connected.
what happens is, i pair the two devices just fine, but then, they just remain connected for some secs and then connection is disabled, rendering the handsfee kits useless. i reconnect, after some secs it disconnects again. been reading on internet and it seems its a common problem with JB 4.2.1, these bluetooth issues.
my question is, is there any fix i can apply? any app that i can install? anything at all?!
thx for any help
Other phone (Walton Primo X2 with 4.2.1), same issue.
Is there any solution, because no upgrade is planned from the manufacturer.
Thx
MyPass
somebody???