Not flashing? - Touch Diamond2, Pure ROM Development

I get all the way to the progress bar and them it just stays there for a very long time and nothing happen? Help is greatly appricated.

---

Ok beings as you've told us nothing in your post .
1. Are you using a 100% genuine Topaz (Diamond 2)?
2. Which ROM are you trying to flash ?
3. is the progress bar on the white flash screen or on the first boot windows screen?
4. Have you used Hard_spl?
5. Are you using a guide to flash your phone or just going hit & miss styls?
6. Are you flashing from the memory card or from the computer?
Add those to your next post and maybe we'll be able to help you

---

I'm using a HTC Pure from At&t, I'm trying to use Hard_spl, goes into bootloader mode and I get a progress bar with 0% and stays there, Hard_spl guide, from the computer. total noob!

---

acseazzu said:
I'm using a HTC Pure from At&t, I'm trying to use Hard_spl, goes into bootloader mode and I get a progress bar with 0% and stays there, Hard_spl guide, from the computer. total noob!
Click to expand...
Click to collapse
1) what does the phone screen show for version number before the progress bar comes up?
2) if you let the whole thing go on, do you get an "error 262" at the end on the PC? or another error?

---

cmonex said:
1) what does the phone screen show for version number before the progress bar comes up?
2) if you let the whole thing go on, do you get an "error 262" at the end on the PC? or another error?
Click to expand...
Click to collapse
1) "TOPA210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
TURBO HW/TURBO SW
TP MFG DATA
512,547 190,885
193,205 829,206
826,886 Calibrated
2)Yes I eventually get the 262 error.
I went to the HTC site and ran their stock HTC pure image and it worked just fine.

---

acseazzu said:
1) "TOPA210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
TURBO HW/TURBO SW
TP MFG DATA
512,547 190,885
193,205 829,206
826,886 Calibrated
2)Yes I eventually get the 262 error.
I went to the HTC site and ran their stock HTC pure image and it worked just fine.
Click to expand...
Click to collapse
Ok that should be the correct version for Hard_spl but for the sake of it go into tri-colour mode (details in the Hard spl thread) and check it says olinex in that mode. If it does some people have reported that doing this works.
1. Reflash to stock ROM ( i know you have already done this and can skip this step but it's there for future use)
2. Run the Hard_spl relocker file found in the hard spl thread http://forum.xda-developers.com/showthread.php?t=520312
3. Start the phone make sure the stock ROM still works ok.
4. Reflash Hard_spl newest version again found in this post http://forum.xda-developers.com/showthread.php?t=520312 follow instructions in that thread.
5. Once you have the Hard_spl installed on your device (again it's in that first post how to check)
6. Pick your new ROM from the ROM's section on this forum.
7. Download and flash using this guide http://forum.xda-developers.com/showthread.php?t=585201 (Please note it's easier and technically safer to flash using a memory card if you have one as this minimizes - if not removes - the chance of getting a connection error)
If it doesn't say Olinex then you haven't flashed hard_spl successfully follow the thread listed above to flash it on then your ROM

---

warlordxxx said:
Ok that should be the correct version for Hard_spl but for the sake of it go into tri-colour mode (details in the Hard spl thread) and check it says olinex in that mode. If it does some people have reported that doing this works.
1. Reflash to stock ROM ( i know you have already done this and can skip this step but it's there for future use)
2. Run the Hard_spl relocker file found in the hard spl thread http://forum.xda-developers.com/showthread.php?t=520312
Click to expand...
Click to collapse
I keep on getting Error 262 again.

---

acseazzu said:
I keep on getting Error 262 again.
Click to expand...
Click to collapse
At which point while you are trying to flash hard spl ?

---

acseazzu said:
1) "TOPA210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
TURBO HW/TURBO SW
TP MFG DATA
512,547 190,885
193,205 829,206
826,886 Calibrated
2)Yes I eventually get the 262 error.
I went to the HTC site and ran their stock HTC pure image and it worked just fine.
Click to expand...
Click to collapse
nooo, do not put it in bootloader manually by pressing buttons!
run Automatic mode in Hard-SPL, and tell me what the phone screen shows before flashing.

---

I have exactly the same problem with one of my Topaz, have two, the other one did not have any problem? Stays at 0% and then error.

---

walsco said:
I have exactly the same problem with one of my Topaz, have two, the other one did not have any problem? Stays at 0% and then error.
Click to expand...
Click to collapse
are you using automatic mode?

---

I've tried both modes, in automatic it say that I can't use it profesionally, I guess it complains because I already flashed the other one? But then again I can't even run the TopazSPLRelocker_SPL133, it to stays at 0% and then error, feels like the phone would have a dip switch that sayn, no flashing, but then again, stock rom just works fine everytime.

---

BTW my phone have these data:
Topa100 32M
SPL-2.51.0000
MicroP-Topaz (LED) v10
TURBO HW/TURBO SW
Cool, everything is turbo, hw and sw, hahahahahahaha

---

walsco said:
I've tried both modes, in automatic it say that I can't use it profesionally, I guess it complains because I already flashed the other one? But then again I can't even run the TopazSPLRelocker_SPL133, it to stays at 0% and then error, feels like the phone would have a dip switch that sayn, no flashing, but then again, stock rom just works fine everytime.
Click to expand...
Click to collapse
you can send us a message for help here : http://support.htc-unlocks.com/