Hi,
I have a vibrant and when I was trying to change the ROM back to what I had previously, the phone got stuck, I can reboot to the recovery mode but that is not helping, I tried everything. Can someone assist me with this?
Thanks
Could you be a little more specific.
Try getting into download mode. Then you can use odin to go back to jfd then ji6, or one of the froyo roms. Look in the bible sticky up top for odin flashable roms.
To get into download mode.
Pull the battery, put it back in. hold the up and down volume buttons. Do not touch the power button. Then plug the usb into the phone.
Next time this should be in q and a section.
Sent from my SGH-T959 using XDA App
jelouane said:
Hi,
I have a vibrant and when I was trying to change the ROM back to what I had previously, the phone got stuck, I can reboot to the recovery mode but that is not helping, I tried everything. Can someone assist me with this?
Thanks
Click to expand...
Click to collapse
Please tell us what rom are you downgrading from.
Did you have voodoo or any other lagfix enabled?
Recovery you get access to is 2e or 3e?
Are you able to get into download mode to odin back to shipping stock if necessary?
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Ok, I got my phone to start on download mode and have been able to use odin. Thank u all for the help
Sent from my SGH-T959 using XDA App
Related
I followed the guide on Pathik Shah to put Froyo on Galaxy S phones. I assumed since I the Vibrant was a Galaxy S phone it would work. Now I'm stuck in the recovery screen. I can't select anything or get to downloader mode because there's no OK button to do the combination with.
What do I do? How can I possibly get any Vibrant FW back on my phone?
You can use adb to reboot when in recovery. I'm not sure what version of froyo you installed so I can't guarantee how to safely reflash original firmware--a few months ago a bunch of people messed up their phones by installing a European firmware then trying to reinstall our firmware.
Sent from my SGH-T959 using XDA App
shalpp said:
I followed the guide on Pathik Shah to put Froyo on Galaxy S phones. I assumed since I the Vibrant was a Galaxy S phone it would work. Now I'm stuck in the recovery screen. I can't select anything or get to downloader mode because there's no OK button to do the combination with.
What do I do? How can I possibly get any Vibrant FW back on my phone?
Click to expand...
Click to collapse
In development section go to the bible and download the froyo rom that does not brick and continue from there.
I rooted my phone not too long ago and finally decided to add a custom ROM to my Vibrant. I went with the eugene373 Vibrant Hybrid after using the ROM manager to extract it the phone froze on the boot up screen I can hear the boot up sound but stays on the screen the rest of the time. I followed all the info on the rooting process but I don't know if there's a way I can just got back or fix the ROM. Thanks in advance!
MeximCivic said:
I rooted my phone not too long ago and finally decided to add a custom ROM to my Vibrant. I went with the eugene373 Vibrant Hybrid after using the ROM manager to extract it the phone froze on the boot up screen I can hear the boot up sound but stays on the screen the rest of the time. I followed all the info on the rooting process but I don't know if there's a way I can just got back or fix the ROM. Thanks in advance!
Click to expand...
Click to collapse
You have to use odin to go back to stock.
Sent from my vibrant.
MeximCivic said:
I rooted my phone not too long ago and finally decided to add a custom ROM to my Vibrant. I went with the eugene373 Vibrant Hybrid after using the ROM manager to extract it the phone froze on the boot up screen I can hear the boot up sound but stays on the screen the rest of the time. I followed all the info on the rooting process but I don't know if there's a way I can just got back or fix the ROM. Thanks in advance!
Click to expand...
Click to collapse
Please note "Q" means question not "DEV".
Instead of telling people "wrong thread" why not just help them. Go to the "Bible" in development thread download odin and stock jfd, once you downloaded those 2 run odin press PIT and click on the 512.pit file and for pda its the JFD you downloaded if you dont understand what im saying go look at threads of how to use odin back to stock its more detailed. Your phone itself has to be in download mode, easiest way since the 3 button dont work for some (like me) fully turn off your phone if it doesnt pull the battery out. Once its fully off press and hold the 2 volume keys and plug in the usb and your in the download screen and press Start for odin and your back at stock. (And now that I helped) next time post this into a Q&A or General thread so you dont get flamed. Good luck
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Can someone point me to post for fixing a rom flash gone bad. My friend flashed Nero 3 and now all he can do is boot to screen with options to Delete pack, reboot, delete user data ect. thx!
kevinniven said:
Can someone point me to post for fixing a rom flash gone bad. My friend flashed Nero 3 and now all he can do is boot to screen with options to Delete pack, reboot, delete user data ect. thx!
Click to expand...
Click to collapse
Should be in Q & A section, but here you go:
http://forum.xda-developers.com/showthread.php?t=810130
Remember to post things like this in the Q&A Section.
http://forum.xda-developers.com/showthread.php?t=771111
This is the vibrant bible.
Down the latest version of odin, the samsung drivers, and a tarball of the stock JFD firmware.
To get into download mode:
Turn phone off.
Plus USB cable into computer but not phone.
Hold Vol Up and Vol Down.
While holding the volume buttons, plug the usb cable in the phone.
Follow the directions from the Odin thread from here.
Sounds like you're in the recovery menu. Do you have the update.zip of cwm? If so, then click reinstall packages from the recovery menu and you should boot to cwm. flash the same rom and see if that helps. You should be good, as long as the rom isn't corrupt. It worked for me.
Sent from my SGH-T959
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Hey Gang! I did some searching and couldn't find my answer so I need some help please. I have the Vibrant (tmo). I did the one click root and then installed Ginger clone final R2. All worked well but then I noticed I could not get back into Clockwork recovery to try another ROM. So... I found the thread explaining how to get back to factory firmware. I did that. Now when I try to Odin, Im no longer able to get the phone to the download screen. I was able to re root with the One Click Root and that worked but I still can not access Clockwork recover or the Download mode or anything to get a ROM on. I guess Im just not doing something or Im a noob idiot. That being said... call my an idiot and walk me through to fix this mess.
Thank you in advance
To get back to download mode try to
1.take off battery
2.run odin as administrator
3.plug in usb cable
4.hold the volume keys and while you are holding them plug back the battery
Sent from my blazing fast vibrant running nero v3 + voodoo while using swype
From any screen hold pwr button and vol up and vol down....keep holding untill you see the vibrant boot screen then release all at the same time. That will rake you to recovery if the reinstall pkgs option is there just click it. You may have to do this twice in order to get into clockwork recovery. Do this with the phone unplugged. hope this helps
See above post for dl mode
Sent from my SGH-T959 using XDA App
First questions in question section. Second when on the blue screen go to reinstall packages that will take you to the green recovery screen. You may have to click reinstall a second time. Third the easiest way to download is to make sure your phone is off. Plug usb into phone only. Press and hold both volume buttons while still holding them plug other end of usb into computer.
Sent from my SGH-T959 using XDA App
The way I get to recovery is with the phone off I
1.hold down volume up and down also the power button
2.when you see the vibrant screen keep holding all thee
3.you will c the vibrant screen one more time when you do stop holding power but keep holding the volume keys
4.then hit reinstall packages...you might have to hit it more than once
Sent from my blazing fast vibrant running nero v3 + voodoo while using swype
sTyLeSz said:
To get back to download mode try to
1.take off battery
2.run odin as administrator
3.plug in usb cable
4.hold the volume keys and while you are holding them plug back the battery
Sent from my blazing fast vibrant running nero v3 + voodoo while using swype
Click to expand...
Click to collapse
Hey Stylesz... Thats what I was trying and it does not work. It just stays black.
nickmcminn60 said:
From any screen hold pwr button and vol up and vol down....keep holding untill you see the vibrant boot screen then release all at the same time. That will rake you to recovery if the reinstall pkgs option is there just click it. You may have to do this twice in order to get into clockwork recovery. Do this with the phone unplugged. hope this helps
See above post for dl mode
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Nick... I tried that and all it did was reboot. It did not go to any recovery.
I did notice that when I reverted back to factory, It actually was not the firmware I had before all this. I had JI6 and when I did the revert it was JE8. Im lost. LOL
Adb reboot download . or if u can still boot up download emulator from market and type reboot download .. if still doesnt work u might need to sauter a jig to get u in download mode
diazf09 said:
Adb reboot download . or if u can still boot up download emulator from market and type reboot download .. if still doesnt work u might need to sauter a jig to get u in download mode
Click to expand...
Click to collapse
OK.... I downloaded terminal. Then reboot download. That worked, so I loaded up Odin, loaded the files and it failed. Then I just rebooted the phone and now I have a black screen with an icon in the middle of a cellphone and computer with an orange explaination mark in between them. Am I hosed?
zeroplace said:
Hey Gang! I did some searching and couldn't find my answer so I need some help please. I have the Vibrant (tmo). I did the one click root and then installed Ginger clone final R2. All worked well but then I noticed I could not get back into Clockwork recovery to try another ROM. So... I found the thread explaining how to get back to factory firmware. I did that. Now when I try to Odin, Im no longer able to get the phone to the download screen. I was able to re root with the One Click Root and that worked but I still can not access Clockwork recover or the Download mode or anything to get a ROM on. I guess Im just not doing something or Im a noob idiot. That being said... call my an idiot and walk me through to fix this mess.
Thank you in advance
Click to expand...
Click to collapse
Easiest way, after you have odin'd back to stock and rooted your phone.
Download the app Rom Manager for the market.
The first thing you need to do once Rom Manger is installed is copy the rom you want to flash to your internal SD card.
Then Start Rom Manger.
The first time you use Rom Manager is select the top menu item "Flash ColockworkMod Recover" and select your phone in this case I am assuming "Samsung Vibrant"
After the flash completes select "Install Rom from SD card".
It is fairly self explanatory from there.
Good luck.
Ok first, as stated before questions go in QA section no development.
to access CWM Recovery you may have to keep the update.zip file in internal SD card root
Odin is different
power off the phone, pressing volume up+down at the same time (don't touch power or you will keep going into recovery) until you get on download mode. (different than recovery).
Plug USB, ready to odin
When ODIN back to original, be SURE to check Re Partition and load the pit and phone files.
DangerousDave said:
Easiest way, after you have odin'd back to stock and rooted your phone.
Download the app Rom Manager for the market.
The first thing you need to do once Rom Manger is installed is copy the rom you want to flash to your internal SD card.
Then Start Rom Manger.
The first time you use Rom Manager is select the top menu item "Flash ColockworkMod Recover" and select your phone in this case I am assuming "Samsung Vibrant"
After the flash completes select "Install Rom from SD card".
It is fairly self explanatory from there.
Good luck.
Click to expand...
Click to collapse
Thank you Dave! I was using Rom Manager with failed attempt, however Im game for another try. As soon as I get back to stock, I will give it another go. Cross your digits!
I do not know why this is so difficult now. I got back to an unwanted factory rom. I rooted the phone, put the new rom on the internal mem card. Downloaded Rom Manager. Installed Clockwork. Selected Install ROM from sdcard. Selected the rom and it rebooted to the original recovery (blue and yellow). No signs of Clockwork recovery (green). Now I have a rooted phone with an umwanted fatory rom and can install any other rom on it.
This sounds like a problem I was having for awhile. After installing clockwork mod it would only reboot to the standard recovery screen. I had to install update.zip again from this screen several times and eventually it stopped asking me for this step and started to boot clockwork mod properly.
Sent from my SGH-T959 using XDA App
slegrand said:
This sounds like a problem I was having for awhile. After installing clockwork mod it would only reboot to the standard recovery screen. I had to install update.zip again from this screen several times and eventually it stopped asking me for this step and started to boot clockwork mod properly.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Just keep your CWM update.zip file in the root of the internal SD Card
Now if you installed Froyo leaked rom stock, and the Recovery now on top says 3einstead of 2e, then you need to fix that, look for the thread to convert 3e to 2e otherwise CWM won't work anymore. you need to be rooted and have root explorer or know how to use either adb or terminal
http://forum.xda-developers.com/showthread.php?t=833423
Well.... I have no idea what I did but it is now working. I tried everyones suggestions so Im unsure what did what. I want to thank everyone for their help and quick response's. I was actually expecting to get bashed about searching and being a noob etc. After seeing some of the other posts, Im surprised I didn't. Thanks again for making it easy to reply and explain what I was doing and what was going on. I have a new outlook about XDA.
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Please help! i tried searching for this, but can't seem to find a solution...
I currently have FROYO.UVJK2 with Kernel version of 2.6.32.9
in trying to load the Nero v5, i went to ROM manager and got the latest ClockworkMod Recovery to 2.5.1.2.
After this update, i push the reboot into Recovery. however, instead of going in to the ClockworkMod Recovery menu after reboot, it keeps just hanging on the Vibrant screen.
I tried to do the ClockworkMod manually with no success either, it just hangs on vibrant screen. -,-;
help!
Any suggestions? Thanks!
Also: i tried older clockworkmod recovery files with no success either. When every i try to manually get into the Recovery, the "vibrant" either just hangs or just keeps restarting. I have to do a battery pull to be able to get past the hanging vibrant stage.
sorry guys, i posted in the wrong forum. Could the mod move this to general?
again. my bad.
Odin back to stock and try again.
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
serban954 said:
Odin back to stock and try again.
Click to expand...
Click to collapse
would Odin be the only solution?
After Odin, do i use a custom ROM to restart or is it just plug, load and i am good to go..? seems like the instructions i found so far just guide you to upload the Odin into your phone but doesn't say what to do next. I guess what i am wondering is, after Odin, does the phone revert back to stock ROM?
nahooneyya said:
would Odin be the only solution?
After Odin, do i use a custom ROM to restart or is it just plug, load and i am good to go..? seems like the instructions i found so far just guide you to upload the Odin into your phone but doesn't say what to do next. I guess what i am wondering is, after Odin, does the phone revert back to stock ROM?
Click to expand...
Click to collapse
i have same problem,,but the computer does not SEE the phone so i cant even odin....the computer SEE'S my other vib. phone just not this one,,wtf...i put the other phone back to stock and then did the ota 2.2 from kies,,but this phone is driving my crazy.