My mini pro was in boot loop, then I flashed it with the flasher by bin4ry using the nordic firmware and now it turns on.
The problem is that the touchscreen and the other buttons don't work. Just the power button seems to work. Any idea?
Don't tell to try with seus or PC Companion because the first says my phone is up-to-date and the second one says that at the moment the software is not available.
Please help me!
my touchscreen stops working too after i flashed my mini pro to cm7.
Please help! THanks!!
you can try to flash to other rom if you have xrecovery or cwm on your device
or you can try to wipe data or cache first
this is just noob advice
my gf device just like you, but i just flash it over SEUS because i cant enter recovery mode
lije87 said:
My mini pro was in boot loop, then I flashed it with the flasher by bin4ry using the nordic firmware and now it turns on.
The problem is that the touchscreen and the other buttons don't work. Just the power button seems to work. Any idea?
Don't tell to try with seus or PC Companion because the first says my phone is up-to-date and the second one says that at the moment the software is not available.
Please help me!
Click to expand...
Click to collapse
You can always use SE Suite or SEUS
If you start PC suite whithout phone connected and go to support zone, start the phone update, there will be a pop up whit a link to repair the phone.
See screenshot.
@elisazh Open the minicm7 zip file with winrar and then goto systen/lib/modules and delete cy8ctma300_ser.ko
I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App
earlier today, i was downloading some stuffs from market thru wifi..somehow my mini couldn't install the apps on my phone, so i thought a reboot would solve the prob..and so i did..
and guess wat? my mini goes into more prob as it's stuck in reboot loop!!
i reflashed everything and recovered using recovery..but everytime i do that it'll go into reboot loop..weirdly enough fresh stock SE works fine
any idea why??
recovery was fine before... :/
Hey!
I have a very similar problem. My X10 Mini goes on a boot loop right after It shows the Sony Ericsson text.
I I'm trying to use the PC companion for repair but I get a error on It
solution
disasembly your mini, and unplug the battery.
http://www.youtube.com/watch?v=iyT618lVxUs
Help... i just dont know what happen, i've been using the Cyanogen 6 v3.2.1 for a week now, and just so suddenly today, i didnt do anything to my phone, after it reboot on its own, error pop out saying
"The Application DSPManager has stop responding unexpectedly, please try again."
and its looping whenever i press force close. i cant even boot to xrecovery to restore my os. cant even detect my x10 mini pro whenever i plug to usb cable...
i dont know how to do anything now...
Try to press quickly the on/off button and then reboot .
Why do you can't go xrecovery °° ?
Its ok now, i've re-flash using SEus with the help of my friend.
Im not even sure my self why I cant boot to xrecovery since its pre installed with the cm6.
Sent from my Sony Ericsson Xperia X10 Mini Pro using XDA App
Hi guys, i have looked everyway but still couldnt find solution to my X10 mini 's problem. Please help me!
I managed to root and install xrecovery on my x10 mini(elcair) with flashtool. Took the next step and tried to install CWM recovery, and use it to run miniCM6.
After the white sony ericsson logo disappeared, the blue android with the spinning light appeared, but now it seems get stuck here.
I tried using PC companion to restore my phone, but when my phone go into flashmode, there's a windows pop-up saying the USB driver failed to install and USB device cannot be recognized. Tried using flashtool but it doesnt work either. When i tried charging the phone with the charger, the green LED light did not light up too. I was wondering whether its hardware or software problem. Anyone faced similar problem before or knows what can i do next?
I dont have e x10 so im not sure if i can help you but does it have a button combination to get in to download or recovery mode?
You may want to install the drivers for your phone again ,and try to connect your phone again.
Take a SE Stock ROM and flash it using the newest Flash-Tool according to the description how to flash.
This works - I had this problem also on a X10.
Hope it helps.