My mini pro was in boot loop, then I flashed it with the flasher by bin4ry using the nordic firmware and now it turns on.
The problem is that the touchscreen and the other buttons don't work. Just the power button seems to work. Any idea?
Don't tell to try with seus or PC Companion because the first says my phone is up-to-date and the second one says that at the moment the software is not available.
Please help me!
my touchscreen stops working too after i flashed my mini pro to cm7.
Please help! THanks!!
you can try to flash to other rom if you have xrecovery or cwm on your device
or you can try to wipe data or cache first
this is just noob advice
my gf device just like you, but i just flash it over SEUS because i cant enter recovery mode
lije87 said:
My mini pro was in boot loop, then I flashed it with the flasher by bin4ry using the nordic firmware and now it turns on.
The problem is that the touchscreen and the other buttons don't work. Just the power button seems to work. Any idea?
Don't tell to try with seus or PC Companion because the first says my phone is up-to-date and the second one says that at the moment the software is not available.
Please help me!
Click to expand...
Click to collapse
You can always use SE Suite or SEUS
If you start PC suite whithout phone connected and go to support zone, start the phone update, there will be a pop up whit a link to repair the phone.
See screenshot.
@elisazh Open the minicm7 zip file with winrar and then goto systen/lib/modules and delete cy8ctma300_ser.ko
Related
I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App
Hi every one
I'm a newbie on this forum and I have a problem with my xperia x10.
I explain, I have installed a rom on it, it worked very well but i tried on other one and the install aborted.
After this, i reboot my phone and since I am in a infinite boot loop.
The phone vibrate, the screen switch on, the sony ericsson logo appears and after that the phone reboot.
I can' access to the xrecovery menu, i tried the flash mode but it didn't work. I tried also to connect the phone to my PC but it's the same (I can't access to my phone with my PC)
I searched on the forum and on the web, I tried things but it didn't work too...
Is it brick? :s Do you have any idea of something to do.
Sorry for my english, I'm french
weakos said:
Hi every one
I'm a newbie on this forum and I have a problem with my xperia x10.
I explain, I have installed a rom on it, it worked very well but i tried on other one and the install aborted.
After this, i reboot my phone and since I am in a infinite boot loop.
The phone vibrate, the screen switch on, the sony ericsson logo appears and after that the phone reboot.
I can' access to the xrecovery menu, i tried the flash mode but it didn't work. I tried also to connect the phone to my PC but it's the same (I can't access to my phone with my PC)
I searched on the forum and on the web, I tried things but it didn't work too...
Is it brick? :s Do you have any idea of something to do.
Sorry for my english, I'm french
Click to expand...
Click to collapse
Use pc companion to repair phone.
Sent from my X10i using XDA Premium App
I tried to update my phone (2.3) with PC companion, it worked well until the end but i had an error message, I tried a second time but the same, and now I have a warning logo immediately after the sony ericsson logo :
When I connect my phone to my computer, it boots and I have the same logo, and it reboots, I tried to press the return button and it didn't work...
And I can't access to the repair function of PC Companion.
I hope you can help me...
Just download firmware (.ftf) file and flash it with flashtool.
Just go to xperia x10 android development forum and search for flashtool.
Sent from my X10i using XDA App
Thanks ! I will try
aimcr7 said:
Just download firmware (.ftf) file and flash it with flashtool.
Just go to xperia x10 android development forum and search for flashtool.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thats exactly what i did too everytime i brick my Xrecovery.
SEUS..
I tried all those softwares (PC Companion, SEUS, FlashTool) and nothing worked...
With SEUS and FlashTool, It seems to work, but in the end, I have an error message. With FlashTool the installation aborted and with SEUS a failure.
Could it be the battery? (I can't charge my phone...)
Try and diconnect the battery for a few minutes and plug the charger in again and leave it for a few hours.
If you take the back cover off there is a small rubber cover that can be carefully takem loose and beneath that cover you see a white plug and that is the batteryconnection to the phone.
I´ve bricked mine so many times now that I just leave that rubber cover off...
i need your help!
I recently install jblend, and copy all three (.so) files to system/libs, (.jar) to system/frameworks and and two (.apk) to app folder.
when i shut down my phone and turn it on. My phone keeps restarting. So i remove the sdcard while the phone keeps restarting.
now it gives me a message process.media has stopped unexpectedly.
i cant open my photos,mp3, and video, i cant play youtube, i cant browse.
so i decided to update it via seus, i did holding the back key while connecting the phone. But seus doesnt detect my phone. Theres only a green light. And also when the phone is turned on and i connect to pc, it keeps restarting.
Can sony fix my problem?
thanks
hey. noneed to flash the stock rom nd then root and all buddy. remove the battery and restart it. enter into recovery or cmw. just install the custom rom again. u can mount your sd card and unmount it from cmw. this happened couple of times with me. not a big deal!
thanks siddardha21
1.how can i remove the battery of x10 mini?
2.hox can i enter into recovery or cmw?
3.where can i get custom rom for x10 mini android 1.6?
And do force method working? I mean holding middle+back and power button? Do seus will detect my phone now after i do it?
thanks siddardha21.
welcome.
i'm afraid to say tht mini battery cover can be removed but battery is not user replaceble. tht means u must take it so se store to change your battery.
2. did u install cmw or recovery before? i guess u never rooted your phone?? its ok.
if u have'nt rooted. u ust flash with stock seus rom. yes. seus will recognse your phone. u can get custom rom frm mini android development section. mini has best roms out there. check them out.
hi! Thanks again.
i did not install custom rom,
but i rooted it with universal androot. (is that ok)?
And i will try to follow what you said about flashing.
can you post the complete procedure about flashing?
thanks
yep!! sure. download sony ericsson update service and all the drivers it asks. thn install it.
open the seus and click update phone and follow the instructions it shows on the screen. or turn of the phone hold power button and back button and connect it to usb. it will update itself. hit thanks if i helped you!
thanks. I will try it! Hope it works! Thank you siddardha21!
Hi would appreciate some help as i seem to of exhausted all avenues...
Was loading a new rom with xrecovery and twice it would'nt load so without any thought took out cable when it rebooted was left with just SONY ERRICSSON in white screen.
It appears no rom is on at all now and will not recognise on superoneclick, flashtool or seus!!
I've tried many times but to no avail HELP!!!
lounger64 said:
Hi would appreciate some help as i seem to of exhausted all avenues...
Was loading a new rom with xrecovery and twice it would'nt load so without any thought took out cable when it rebooted was left with just SONY ERRICSSON in white screen.
It appears no rom is on at all now and will not recognise on superoneclick, flashtool or seus!!
I've tried many times but to no avail HELP!!!
Click to expand...
Click to collapse
Can you still access xrecovery at all?
If not, what can you when you try to flash something via flashtool?
Did you try PC Companion instead?
Flash the stock SE firmware (I would recommend the 2.3.3 one to save yourself trouble) from Flashtool. If that doesn't work, you're pretty much screwed.
DL firmware from here : http://forum.xda-developers.com/showthread.php?t=920746
Best option is given by Panzerfaust101
Another option is as follows:
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 10 secs, install the latest firmware and then try accessing Xrecovery.
Its should do the trick!!
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA