♠♠♠PLeaSE HeLLLP MY p3400 bricked♦ NeED HelP URgently♠♠♠♠
dear bros. am using HTC gene. yesterday am thought to upgrade my Phone OS and i do the olipro method . first am copy gene_hspl.exe into my phone memory and click to that file . then the PHONE was switch off .after olipro methord my phone ded (only red and green button blinks when i press the power butten).and am go to the orefkov method . but the last...... " ROM update utility " runs in my pc an error message display. "ERROR 200 " ."pls get newer update utility". pls help me . now my phone was
switch off. pls replay urgently.
any trick for swith on my phone., like to remove gene_hspl.exe from the phone memmory(just my idea).
or how to start my phone ....
adv thx.,,,,,,,,,,...................
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
same problem
@krrahuldev
Did u manage to fix ur phone?
i have the same problem
My handset not going in boot loader mode
only ( green + red ) button light blink
try upgarde the rom , allways connection error
any solution will be helpfull
Thanks in advance
try killing the wcecomm.exe process from task manager again!!
hope it works
tryed , but the computer does not detect the handset,
Even check in DEVICE MANAGER ,does not show anything
Dear,
Can u please tell us which Operating System u are using. U might need to change the USB drives given by Krazy.
i am useing windows XP
Any link will be usefull
please check ur private msgs....
this phone came to change the lang
Original rom was : RUU_Gene_HTC_RUS_1.7.411.0_4.1.13.31_02.71.90_Ship _Abdie.exe
From
Russian to english
I use Olipro For Old Gene
After that i upgarde the rom
with this file
RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe
After the upgrade it showed sucessfull
But the handset did not power on
Only lights comming on the ( Red- green button )
& now even the computer does not detect the phone
press n hold camera button n reset if u hv done previous steps properly it wil go to bootloader mode!
tryed many times but does not go into bootloader
sams said:
tryed many times but does not go into bootloader
Click to expand...
Click to collapse
Hold Camera Button and press "Soft Reset " which is at the Bottom of phone..
try This
same problem but now cant get in bootlaoder anymore,pls help
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
excelpass said:
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
Click to expand...
Click to collapse
remove battery and then press on button then put battery back and then try to above method .
Any Trick for restoring boot file??
cuteitsme said:
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
Click to expand...
Click to collapse
Hello Brother .,
not working for me the update tool to attached by u... the same prob shows.!!!!!!!!!!
any trick for restoring my p3400 rom? for working condition???
pls reply immediately...........
are u able to get into the boot loader mode??
unless n until u r able to enter the boot loader mode the ROM update utility will not detect your phone.....
Problem
i have the same problem
My handset not starting on
only ( green + red ) button light blink
try everythin yaar
any solution will be helpfull
Thanks in advance
HTC P3400 good bye
i got the same proplem my mobile was stucked in bootloader screen i used mtty & successfully completed the rom update after that my phone give nothing even no bootloader screen so i have to say good bye
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
Just guessing - did you flash Radio ROM which is compatible with your ROM (usually list of compatible Radios you can find in the first few posts of the thread of ROM)
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
Restart from bootloader mode. Make task29, After install a new version of Radio (2.15) and then flash a custom ROM. If you do not know how to make that, send a pm to me.
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
If you could post your "bootloader" info (what does is show), custom ROM+radio info, HD2 version (T-moUSA or EU), and the method/process you used to flash that would help us help you quicker
hey guys thnks for ur replies
my hd2 is nt a t mobile its a normal htc hd2 with 512 flash memory size
my radio version is 2.05.51.05_2
protocol version 15.28.50.07U
my stock version was 1.48 then later i made it 1.48 hspl then later to install duttis n4s legacy v3 i installed 1.66 hsplversion.. then ROM works its jus wenever i restart it wont boot i always have to hard reset it..
guy thnkx for ur replies ..really appriciated
guys thnlx a lot for ur help
changed the radio version to 2.11 its works like a charm..
thnkx guys
Please help me guys ((((
first you should know i rooted my phone and got new kernel and ROM 2 months ago : MIUI
but today i wanted to flash a new fast kernel "fusion" and get superJB rom ...
*i can't post links of the kernel and rom because this is my first post*
i flashed the kernel successfully with flash tool
then i tried to boot my phone i just got the fusion logo forever
so i had to pull the battery out many times
i said it was ok and i began to flash the new ROM maybe it would work
now the problem : my little brother hit the mobile cable while flashing the system.img ( rom image )
:'(
i tried to restart the process but the phone doesn't respond and i just have the logo of fusion
forever and the blue led always on .. when it boots (((
I Need help please what can i do ????
ANYTHING will be appreciated
up
up
my friend came to me with a i touch m703(allwinner a13) tab.the fault is somtimes it stuck on android logo.soo then power of and restart it works well.after doing something it stuck again.so i tried flash it 7 times using live suit and pheonix cad.i have downloaded many roms.the only one flashing is firmware Allwinner A13 lenoxx tb-50 !!! it flash fine.others fail to flash using pheonux card.after flashing >> power on tab >> stuck on booting android logo.but when it connect to the pc using data cable after few seconds it is power on successly.but touch screen no working.when data cable disconnected stucks on logo again.i am fedup of this tab flashing.plz tell me what to do.
before the first time flash i wrote drown informations
model-mid
(but in back cover it says model m703)
baseband version-1.5.2
deverloper options- ASXW-022T-704L-0
android version-4.0.4
after flashing that rom i found this info by using mtkdroid tools
sun5i
nuclear_pfdq88_eng
utc dat 20120801-015944
hey gays plz help me give me a right firnware and tell me what to do
no rply????
plzzz help me guysss
Hi friends,
dear experts I am facing problem of boot loop
my phone is just showing brand logo and vibrating after few seconds after I installed fake device with xposed andmade changes I think in prop.build file through software mentioned above.
I have ROM back up made through ROM manaager and mtk toolkit and I restored , factory reset but all in vain and in mtk toolkit my device is not shown/reveled. I have installed drivers PDA , adb , phone official but all ended in smoke.oops
kindly tell me the sulotion of this problem. I be strong hope I will get the solution from you EXPERTS Guys!