HELP plz help!!!! - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

HI
Ive accidently installed a french nrg_drg rom on leo, and now im unable to flash it. Plz helTried flashing it via sd card but it gets stuck on the page after bootloader( stays as loading......)

With device do you have; the normal HD2 or the T-Mous HD2?
witch information do you see on bootlouder?

Just checking:
Did you renamed the rom file to "leoimg.nbh" in the sd card?

normal version
ADEEL AYUB

Hi
Can you start your Bootloader? (Turn device on and hold Volume button down)
When yes:
Start Bootloader
Connect Phone to PC
Download the right ROM and try to flash.
At my first time i have flashed a ROM i had the same mistake.

Yes i did rename it
ADEEL AYUB

Yes i did try to flash it via sd card + custom ruu.exe but it gets stuck at 0%

drkamran said:
Yes i did try to flash it via sd card + custom ruu.exe but it gets stuck at 0%
Click to expand...
Click to collapse
If you are on bootloader, witch information do you see there?

Related

HELP - Cannot boot phone!

Hey
I tried flashing my rom to 1.66 from the MicroSD, but something has gone wrong and now my phone will not boot at all. I've tried taking the microSD card out of the phone but it still wont boot, it just shows a triangle with an exclamation mark! Please help!
Many Thanks
put the SD inside the phone again, push the red bottom to reset the phone and keep the vol down pressed and try to flash again..
Did you install HSPL?
If so, don't install HTC Official ROM's from SD card unless:
1) the ROM is for you region/operator (CID)
2) you're using a gold card to flash (I think)
Flashing official ROM's from MicroSD will overwrite the HSPL with the normal HTC SPL. With the regular SPL in place, the ROM you flash has to be for your region/operator, or it won't flash/boot normally.
Solution: reflash HSPL, and install the 1.66 ROM over USB (the HSPL doesn't allow itself to be overwritten over USB, if I remember correctly).

HTC HD2 stuck on HTC logo!!

Hello, i have an HTC HD2 leo and flashed it with HSPL. I then flashed it with file RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe. Now phone is stuck on HTC logo and pc cannot detect phone, even tried hard reset but still problem...help
did you try to reflash the ROM by going to bootloader mode (power + volume down)? the pc should find it this way.
or flash through storage card (extract the nbh file, rename it to LEOIMG..etc) ?
sarantos said:
did you try to reflash the ROM by going to bootloader mode (power + volume down)? the pc should find it this way.
or flash through storage card (extract the nbh file, rename it to LEOIMG..etc) ?
Click to expand...
Click to collapse
The phone cannot go beyond the HTC logo so i cant flash through storage card. I now put phone in bootloader mode and flashed it again but now process stops at 8%. Help..
Do you have a branded device?
Is your official device a WWE Rom language device?
kurt-willems said:
Do you have a branded device?
Is your official device a WWE Rom language device?
Click to expand...
Click to collapse
No, it is an unbranded device and i had many pieces of this model....no problem with other phones. When i try flashing it it stops at 8% and now shows a triangle logo on the screen
Guess what i flashed the phone sucessfully after changing hspl to 1.66. But now again it is stuck on HTC logo...any help?
I also have this problem. Changed to HSPL 1.66, ran Task29 and tried to boot phone into bootloader mode. HTC logo showed up but no tricolor :-(
logo problem
lakshi said:
Hello, i have an HTC HD2 leo and flashed it with HSPL. I then flashed it with file RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe. Now phone is stuck on HTC logo and pc cannot detect phone, even tried hard reset but still problem...help
Click to expand...
Click to collapse
dude mine is same plz help!!!:crying:
Branded Device
kurt-willems said:
Do you have a branded device?
Is your official device a WWE Rom language device?
Click to expand...
Click to collapse
What is a branded device?

[Q] HELP NEEDED HD2 unable to boot after flash rom wrongly

Hi guys, I'm now in a serious problem...I'm using a stock ROM but tried to flash to WM7 and here the nightmare began.
now the problem is that...I can't boot the phone, only show "HTC", can't even see the "quietly brilliant"..I tried to flash back to the stock rom but I noticed that there are no USB connection with the PC, I tried hard rest using the volume key but same things happened.
so anybody able to help me? thanks a lot!
Try to flash the stock ROM with the SD card method (you can find a description in the stickies of the ROM forum).
The error you describe sometimes comes when you have a wrong Radio ROM on your device.
What exactly did you do to get WP7 on your phone? Did you flash HSPL 2.08? Did you flash Radio Rom 2.15?
Did you also try
VOL DOWN + Red button??
you should she them some colorful bars if so, you could be lucky, plug in you usb cable and it should tell you "USB". Then flash your stock rom (Dont forget to run it as Administrator on your pc)
i hope you will get it back working!

[Q] Help me i'm stuck!

Hi..I am new to this android thing and i have a problem.
My phone was recently stuck at the lg logo when i turn it on..i waited but it didn't boot..sa i decided to use KDZ to flash it with an original firmware at 10a..It all went ok..After finishing i again booted my phone but i got stuck at the green circle logo of android..I tried again but still the same..
I also noticed that isn't it that the android logo should be a in pure wordings if its the original firmware and not the green circle with an android word below it?
Guys I've found one original firmware that eventually worked..it's the vodafone v10q..I tried to flash it with KDZ and my phone booted to the desktop screen..
However i can't root it anymore and every time i try to downgrade it the boot loop recurs again..One more thing that puzzles me is that the applications that i previously had in my prime v2 was there..It seems like it wasn't totally flashed..
help me pls! i'm puzzled and i don't know how to root it anymore..
By the way i was previously using prime v2..due too my foolishness, I insisted on flashing a circular battery theme made for void..After rebooting, that's the time i experienced the boot loops..
I dont know if this is possible but u can try,
While setting partition, set 0 mb ext and format sd then repartition with ur required size and flash the rom.
ccdreadcc said:
I dont know if this is possible but u can try,
While setting partition, set 0 mb ext and format sd then repartition with ur required size and flash the rom.
Click to expand...
Click to collapse
i just tried formating my sd card and repartitioning it with an ext2 of 620 mb but when i mounted it to my phone it wasn't recognized anymore..i formatted it with fat 16 system
this is the last line in the kdz log before the word finished: OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate
take out the battery, put it back in then press HOME+VOLUME UP+POWER that should put you in recovery mode and should boot up fine after that.
Omnichron said:
take out the battery, put it back in then press HOME+VOLUME UP+POWER that should put you in recovery mode and should boot up fine after that.
Click to expand...
Click to collapse
i'd try this..
Omnichron said:
take out the battery, put it back in then press HOME+VOLUME UP+POWER that should put you in recovery mode and should boot up fine after that.
Click to expand...
Click to collapse
wow..it did work!..great..thanks

[Q] Done a mega wipe and now phone is stuck on boot screen

Hi guys
I just done a mega wipe on my phone and forgot to keep a comp of the zip file for the rom i wanted to flash on my sd card, when rebooting the phone it stays stuck on the s3 boot screen. Please help!!
lilgenius said:
Hi guys
I just done a mega wipe on my phone and forgot to keep a comp of the zip file for the rom i wanted to flash on my sd card, when rebooting the phone it stays stuck on the s3 boot screen. Please help!!
Click to expand...
Click to collapse
Take the sd card out of the phone and transfer your ROM to it from a PC, replace in phone. Boot phone into recovery, volume up + home + power, then flash in the normal way.
mega wipe deletes your ROM, so there's nothing to boot. you can push the file using adb if you have no card reader or even no card

Categories

Resources