Hello, i have an HTC HD2 leo and flashed it with HSPL. I then flashed it with file RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe. Now phone is stuck on HTC logo and pc cannot detect phone, even tried hard reset but still problem...help
did you try to reflash the ROM by going to bootloader mode (power + volume down)? the pc should find it this way.
or flash through storage card (extract the nbh file, rename it to LEOIMG..etc) ?
sarantos said:
did you try to reflash the ROM by going to bootloader mode (power + volume down)? the pc should find it this way.
or flash through storage card (extract the nbh file, rename it to LEOIMG..etc) ?
Click to expand...
Click to collapse
The phone cannot go beyond the HTC logo so i cant flash through storage card. I now put phone in bootloader mode and flashed it again but now process stops at 8%. Help..
Do you have a branded device?
Is your official device a WWE Rom language device?
kurt-willems said:
Do you have a branded device?
Is your official device a WWE Rom language device?
Click to expand...
Click to collapse
No, it is an unbranded device and i had many pieces of this model....no problem with other phones. When i try flashing it it stops at 8% and now shows a triangle logo on the screen
Guess what i flashed the phone sucessfully after changing hspl to 1.66. But now again it is stuck on HTC logo...any help?
I also have this problem. Changed to HSPL 1.66, ran Task29 and tried to boot phone into bootloader mode. HTC logo showed up but no tricolor :-(
logo problem
lakshi said:
Hello, i have an HTC HD2 leo and flashed it with HSPL. I then flashed it with file RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe. Now phone is stuck on HTC logo and pc cannot detect phone, even tried hard reset but still problem...help
Click to expand...
Click to collapse
dude mine is same plz help!!!:crying:
Branded Device
kurt-willems said:
Do you have a branded device?
Is your official device a WWE Rom language device?
Click to expand...
Click to collapse
What is a branded device?
Related
Dear All,
While I am upgrading TNT to my Dopod 838 Pro without using PC(USB Cable),
I renamed nbh file to HERMIMG.nbh and run SSPL-HERM file in freshly formatted SD card.First it upgrade properly until 100% .After that not booting automatically stuck in 100% .I press reset button and boot TNT screen , after TNT screen only white screen appear, boot nothing.I and stucking in this stage. I tried to load boot loader mood.But I don't know exactly which keys to press to bring boot loader mood in Dopod838Pro.
Kindly guide me what should I do to bring back normal.
Before upgrading my Rom is
Schaps WM6 Pro 4.01 with extension Rom
Dopod838Pro
Radio:1.54.30.10
Thanks in advance
sein said:
Dear All,
While I am upgrading TNT to my Dopod 838 Pro without using PC(USB Cable),
I renamed nbh file to HERMIMG.nbh and run SSPL-HERM file in freshly formatted SD card.First it upgrade properly until 100% .After that not booting automatically stuck in 100% .I press reset button and boot TNT screen , after TNT screen only white screen appear, boot nothing.I and stucking in this stage. I tried to load boot loader mood.But I don't know exactly which keys to press to bring boot loader mood in Dopod838Pro.
Kindly guide me what should I do to bring back normal.
Before upgrading my Rom is
Schaps WM6 Pro 4.01 with extension Rom
Dopod838Pro
Radio:1.54.30.10
Thanks in advance
Click to expand...
Click to collapse
Are you "Hardspl"? (olipro 2.10 for example?)
In this case you do not have to launch SSPL. Just do what i describe here: http://forum.xda-developers.com/showthread.php?t=352004
Bergerac56 said:
Are you "Hardspl"? (olipro 2.10 for example?)
In this case you do not have to launch SSPL. Just do what i describe here: http://forum.xda-developers.com/showthread.php?t=352004
Click to expand...
Click to collapse
Yes Hard SPL 2.6 - Thanks
I've successfully upgraded by using your guide - Thanks again
hi,
i've searched, and am stuck. i tried to flash a new ROM today, but it stopped at 76% and said no connection!?? i've flashed before with no problems many ROMs. I have HardSPL 1.15 mfg installed and everything always worked. Now i'm stuck at 4 color boot screen screen. HardSPL is still there, there is a message at top right saying 'RUUNBH'. I plug USB in and it says 'USB'. I run mtty but can't seem to get any CMD, or even type 'boot' in, no response on app, running on XP?
i'm reeally stuck, and had to come to work, so am worried. can anyone help??
sorry, i am still searching for solution, but please any help appreciated!!
thank you
i will try to check back often, but stuck at work might be problem ..
i got stuck at that boot screen too, but it happened during a boot image change operation. All I had to do was install a new rom.
Hope it helps...
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
badaas said:
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
Click to expand...
Click to collapse
Don't worry, you just need to get to the bootloader screen and flash again, you may have a corrupted update that may hault everytime. If it doen't work try another ROM.
Hold down power and the camera button while pressing and holding the reset button.
When you see the Boot Loader screen you can release all three.
Plug in your cable if it is not already, wait to make sure the computer installs the device and then run the ROM Update executable you want or ROMUpdateUtility.exe if everything is placed in a folder.
Note: Activesync and Mobile Device Center will not launch in this mode, and if the utility tells you to connect through activesync or Mobile Device Center ignore and continue.
OK thank you my friends, i will try when i get home from work. fingers crossed!!
cheers
thx guys, all sorted
Hey
I tried flashing my rom to 1.66 from the MicroSD, but something has gone wrong and now my phone will not boot at all. I've tried taking the microSD card out of the phone but it still wont boot, it just shows a triangle with an exclamation mark! Please help!
Many Thanks
put the SD inside the phone again, push the red bottom to reset the phone and keep the vol down pressed and try to flash again..
Did you install HSPL?
If so, don't install HTC Official ROM's from SD card unless:
1) the ROM is for you region/operator (CID)
2) you're using a gold card to flash (I think)
Flashing official ROM's from MicroSD will overwrite the HSPL with the normal HTC SPL. With the regular SPL in place, the ROM you flash has to be for your region/operator, or it won't flash/boot normally.
Solution: reflash HSPL, and install the 1.66 ROM over USB (the HSPL doesn't allow itself to be overwritten over USB, if I remember correctly).
HI
Ive accidently installed a french nrg_drg rom on leo, and now im unable to flash it. Plz helTried flashing it via sd card but it gets stuck on the page after bootloader( stays as loading......)
With device do you have; the normal HD2 or the T-Mous HD2?
witch information do you see on bootlouder?
Just checking:
Did you renamed the rom file to "leoimg.nbh" in the sd card?
normal version
ADEEL AYUB
Hi
Can you start your Bootloader? (Turn device on and hold Volume button down)
When yes:
Start Bootloader
Connect Phone to PC
Download the right ROM and try to flash.
At my first time i have flashed a ROM i had the same mistake.
Yes i did rename it
ADEEL AYUB
Yes i did try to flash it via sd card + custom ruu.exe but it gets stuck at 0%
drkamran said:
Yes i did try to flash it via sd card + custom ruu.exe but it gets stuck at 0%
Click to expand...
Click to collapse
If you are on bootloader, witch information do you see there?
Hi guys, I'm now in a serious problem...I'm using a stock ROM but tried to flash to WM7 and here the nightmare began.
now the problem is that...I can't boot the phone, only show "HTC", can't even see the "quietly brilliant"..I tried to flash back to the stock rom but I noticed that there are no USB connection with the PC, I tried hard rest using the volume key but same things happened.
so anybody able to help me? thanks a lot!
Try to flash the stock ROM with the SD card method (you can find a description in the stickies of the ROM forum).
The error you describe sometimes comes when you have a wrong Radio ROM on your device.
What exactly did you do to get WP7 on your phone? Did you flash HSPL 2.08? Did you flash Radio Rom 2.15?
Did you also try
VOL DOWN + Red button??
you should she them some colorful bars if so, you could be lucky, plug in you usb cable and it should tell you "USB". Then flash your stock rom (Dont forget to run it as Administrator on your pc)
i hope you will get it back working!