Dear All,
While I am upgrading TNT to my Dopod 838 Pro without using PC(USB Cable),
I renamed nbh file to HERMIMG.nbh and run SSPL-HERM file in freshly formatted SD card.First it upgrade properly until 100% .After that not booting automatically stuck in 100% .I press reset button and boot TNT screen , after TNT screen only white screen appear, boot nothing.I and stucking in this stage. I tried to load boot loader mood.But I don't know exactly which keys to press to bring boot loader mood in Dopod838Pro.
Kindly guide me what should I do to bring back normal.
Before upgrading my Rom is
Schaps WM6 Pro 4.01 with extension Rom
Dopod838Pro
Radio:1.54.30.10
Thanks in advance
sein said:
Dear All,
While I am upgrading TNT to my Dopod 838 Pro without using PC(USB Cable),
I renamed nbh file to HERMIMG.nbh and run SSPL-HERM file in freshly formatted SD card.First it upgrade properly until 100% .After that not booting automatically stuck in 100% .I press reset button and boot TNT screen , after TNT screen only white screen appear, boot nothing.I and stucking in this stage. I tried to load boot loader mood.But I don't know exactly which keys to press to bring boot loader mood in Dopod838Pro.
Kindly guide me what should I do to bring back normal.
Before upgrading my Rom is
Schaps WM6 Pro 4.01 with extension Rom
Dopod838Pro
Radio:1.54.30.10
Thanks in advance
Click to expand...
Click to collapse
Are you "Hardspl"? (olipro 2.10 for example?)
In this case you do not have to launch SSPL. Just do what i describe here: http://forum.xda-developers.com/showthread.php?t=352004
Bergerac56 said:
Are you "Hardspl"? (olipro 2.10 for example?)
In this case you do not have to launch SSPL. Just do what i describe here: http://forum.xda-developers.com/showthread.php?t=352004
Click to expand...
Click to collapse
Yes Hard SPL 2.6 - Thanks
I've successfully upgraded by using your guide - Thanks again
Related
I'm new here!
I had upgraded my Atom Rom to Atom Exec Rom (Chinese Rom 0721) weeks before.
Firstly, it ran faster, stable and seemed nothing wrong.
However, when detached the battery and then reinstalled, the nightmare appeared -- screen flicked, system unstable.
Then I tried to downgrade the rom, but error found even it was in Boot loader Mode. Someone suggested to copy "Eboot.nb0" into SD card and restart the device in Boot loader. It should then allow to downgrade any Rom.
However my story is ...
I copied, not only, but ALL files extracted from Rom (0426) into SD card and then restarted in Boot loader. The device loaded something and then reboot automatically. From that time, I no longer enter the Boot loader mode.
Every time I press CAMERA + RESET, my Atom just RESET and REBOOT. CAMERA button worked when in WM5. I don't know why.
I guess the Boot Loader Mode has been deleted or corrupted.
Can somebody help?
Thx.
Try this .. link.
http://forum.xda-developers.com/showthread.php?t=314896
jeffkewin said:
Try this .. link.
http://forum.xda-developers.com/showthread.php?t=314896
Click to expand...
Click to collapse
Thanks Jeffkewin. I will try leaving my Atom without the battery for a long period.
I've tried a search but couldn't find anything that'd help me so...
I've just flashed my phone and it completed fine, rebooted and stuck on the first splash screen. Tried a soft reset and it stuck on the Windows Mobile splash screen, 5 mins later it's still there...
I've got HardSPL7 installed, so how can I flash the previous Rom I was using back onto the phone?
Ta
Off to have another search while I wait
Copy your chosen ROMs .nbh file to the root of your SD card and rename it to hermimg.nbh. Reset device in to bootloader and it should detect the hermimg.nbh and instruct you to press ther Power buton to update. Sometimes you need to go into bootloader a few times before it picks it up.
See WIKI here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
It is a good thing you have HardSPL v7 installed.
When this happened to me a while back, the best way to recover for me was to extract and copy the OS's .NBH file to the root of my SD card (formatted as FAT32) and naming it HERMIMG.NBH.
If you go into the boot screen (Pwr + OK + SR), you will get a prompt to start flashing the image. After the flash, my device was OK.
I am now using this method every time I flash my OS.
EDIT: Seems Maaron beat me to it.
Thanks guys, now re-flashing to my previous rom.
Was surprisingly easy
Yeah it was lucky I've got HardSPL, glad I put it on
Again ta for the hlep
I first used the SD method to fix a bad flash but now I use it evey time. It seems to flash much quicker this way and it doesn't matter what OS you have on your PC, whether you have incompatible USB controller, version of Activesync etc etc...
Had to do the radio the same way as it still wouldn't boot, but now back in action.
Ta
Good thread w/ information. I too am glad that I flashed HardSPL on my device as well
Out of interest, does the SD card have to be blank except for the image? Or can I just bung the .nbh on there and flash with loads of other stuff on the card?
Ta
The WIKI mentions to copy the nbh file on to a blank SD card but I have found it to work on my card containing numerous files and folders as long as it is in the root of the card.
I have tried that wicki (I was using schnaps and it has for some reason failed on booting after 2 weeks working fine...)
When i press the ok, power and reset buttons it takes me to a screen with red/green/blue/white bars (4 of them) showing
HERM100
IPL-1.04
HERM100
SPL-1.40.Olipro
I have done a flash of the SPL to http://www.mrvanx.org/cms/index.php...ask=view&id=38&Itemid=26&limit=1&limitstart=2
I did this and it said it was successful 2 weeks ago!
What can I do? Help!!!
EDIT: Did a hard reset by pushing the button above the start button, button above the ok button and hitting the reset with the stylus. This seems to have fixed the issue, but what worries me is that apparently hardspl v7 is not on there! :|
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
try a hard reset. turn the phone off, hold down both volume buttons, and turn the phone on, keeping the vol buttons held down. then when prompted,press vol up to reset it.
yes, you'll lose any data and modifications on your phone, it will be back to how it was right after you flashed it, but at least it will start up. better than how it is now, right?
nishankyadav said:
I had installed Chucky rom(ChuckyROM-23136-Tabtastic.Sept.12.7z) on my htc hd2,i had also installed hspl( HSPL2_RUN.exe) around two months(in september 2010) back but i did not like it so today(25th november 2010) first i removed hspl through HSPL3_PKG.exe and put spl 2.08.0000( I DID NOT USE AN SD CARD TO FLASH THE SPL) and then flashed
Artemis_v430_0409_WWE.7z i.e RUU_Signed_0409.nbh through SSPL_RUU.exe and then it worked and was working properly but was hanging again and again so i soft reseted it two-three times and then i was installing a cab file but as soon as the installation started, it said "installation of so and so file.cab was unsuccesfull" then i tried dinik hybridia icon .cab again same thing happened so i soft reseted it and while soft reseting a complete black screen appeared and said "a program from an unrecognised software party was tried to install please press the upper volume button to reset the phone Note. you will lose all your data and the phone will completely reset itself or else press any other button to start normally" i pressed any button so it started loading normally but it has got stuck at that loading and is not doing anything after that ,
it is not connecting to the pc,the backlight of the keys is also not switching on , i have takin the video of it switching on and also of bootloader ,
what has happened to it and why is it not starting,please help?
also even after i flashed artemis gen 4 it is showing the chucky rom boot screen!
In the videos it gets stuck to where i have stopped the video and remains like that for hours(THE Video IS IN THE RAR FILE)
also i have warranty left so can i get it repaired by warranty???
PLEASE HELP ASAP
Click to expand...
Click to collapse
What an utterly unfortunate situation!! Couple of questions/remarks:
1. Did you install HTC 3.14 ROM with your S/N from HTC's website before flashing Artemis?
2. You already removed HSPL, so I would advice to extract the 3.14 RUU file to your desktop and copy the custom.nbh file to your SD Card after having it renamed to leoimg.nbh (insert SD CArd into PC to do that).
3. Reinsert SD card in device and enter bootlader mode and the installation of 3.14 should start automatically.
4. After that download Artemis 43 and extract it to the folder where you're SSPL_RUU,exe resides. Bothe the custom.nbh and the SSPL file must be in the same folder!
6. Start SSPL_RUU and flash Artemis
7. After that first a hard reset and then a soft reset.
Also read page 1 - Flashing notes
This should to it for you,
regards, Kuzibri
P.S. I posted this also in Artemis thread
same problem
i've got the same problem, but i didn't install the rom artemis,
i restart the installation many time but i've got always the same problem
the display showing loading..... please wait with the chucky logo.
someone can help me???????
thank you
I've got a jamin in 3color screen i've tried to update it with shiped rom it runs without any error and gives congratulation msg but the screen is still on bootloader after updating the progress bar runs normal. when i do hard reset it freezed on start logo.
pls help anybody if possible
regards
you want the original rom from i-mate to setup in your pocket pc because your phone is locked with security you shoud make HardSPL to setup any rom on your phone
azhar63 said:
I've got a jamin in 3color screen i've tried to update it with shiped rom it runs without any error and gives congratulation msg but the screen is still on bootloader after updating the progress bar runs normal. when i do hard reset it freezed on start logo.
pls help anybody if possible
regards
Click to expand...
Click to collapse
try a hard reset (hold camera and comm manager and power) it will powers up telling you that it will format the drive.
press yes (green call key) then see if it will boot up
if not:
then do the following
http://forum.xda-developers.com/wiki/index.php?title=Prophet_recovery
Today i downloaded hspl 4 for my hd2 that was running rom 3.14 and has spl 3.03
then i tried to install magldr 1.13 but after the installation my phone has not been able to start it is stuck on the boot screen
I found out that spl 3.03 and hspl 4 isn't compatible with magldr 1.13
how do i reset it? I've already tried to do a hard reset but it didn't work
please help!!
jing92 said:
Today i downloaded hspl 4 for my hd2 that was running rom 3.14 and has spl 3.03
then i tried to install magldr 1.13 but after the installation my phone has not been able to start it is stuck on the boot screen
I found out that spl 3.03 and hspl 4 isn't compatible with magldr 1.13
how do i reset it? I've already tried to do a hard reset but it didn't work
please help!!
Click to expand...
Click to collapse
bootloader - run hspl4 - choose 2.08.hspl
got the same problem
hiya i have the same problem phone is stuck on htc screen and when i reload hspl4 to change it to 2.08 it wont load because it cant make usb connection any ideas?
dont worry found bootloader instructions and it worked
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.