x10 won't charge when the phone is off - XPERIA X10 Q&A, Help & Troubleshooting

Hello,
I have a rooted 2.1 with xrecovery, when I charge my phone the green led comes on 96% charge.. so i'm trying the battery wipe on xrecovery,
but I need to charge full 100% when my phone is completely off,, but when the phone is off and I put the usb cable the phone won't charge, but turns immediatley on,(and after continue to charge when the phone is on..)
does somebody have the same problem?
thanks, sorry for my english

It's normal in x10.
Sent from my X10i using XDA App

if yewve installed Xrecvry
den when ever u plug in charger while ur fone is offf it will turn on ..
if xrecvry isnt install den u can charge ur fone while fone is offf
else u have to replace the old chargemon file System/bin with the old 1

Once you install xrecovery, you lose that feature. It overwrites the chargemon file that controls that.
All you have to do it overwrite the new chargemon file with the original one.
For me, once I was done with xrecovery, I uninstalled it and put back the original chargemon file. I now have "charging when turned off" back.

Related

Battery problem ?

Hi,
I tried to install android 2.1 v1.3 and after I did the radio and wipe and then install,I restarted my HTC ... and then the battery went off.If I remove the battery and then I reinsert it I get that image with the phone out of the box and then it power offs itself.
If I plug my HTC to my PC,I get unknown device(that is what I was always getting) but it doesn't charge anymore.Before I tried to reinstall this,if I was pluggin it into the PC I could charge him to full battery.What should I do ?

[Q] XPERIA X10 Booting problem

hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA

Problem after installing CWM

after istalling CWM i can't charge the battery while my phone is off. when i connect the charger the phone turns on and when "sony" appears on the screen, it reboots automatically and the same thing happens again and again. so, in case my phone battery goes dead, i can't charge it any more. is this normal or does this happen only for me? is there any way to fix this?
kobakareli said:
after istalling CWM i can't charge the battery while my phone is off. when i connect the charger the phone turns on and when "sony" appears on the screen, it reboots automatically and the same thing happens again and again. so, in case my phone battery goes dead, i can't charge it any more. is this normal or does this happen only for me? is there any way to fix this?
Click to expand...
Click to collapse
Boot your phone and then charge it.
Your battery won't go dead.
Are you sure you installed cwm correct? Describe us what you did to install cwm on your phone.
Send from my Neo V with JJHybrid 3.3b and Night Elf 1.4 using Tapatalk 2
motorazrv3 said:
Boot your phone and then charge it.
Your battery won't go dead.
Are you sure you installed cwm correct? Describe us what you did to install cwm on your phone.
Send from my Neo V with JJHybrid 3.3b and Night Elf 1.4 using Tapatalk 2
Click to expand...
Click to collapse
i installed it with SE Extreme Tweak Installer. just connected the phone with USB, chose "CWM for xperia neo/..." option and clicked on install

Problem with my xt 1225

My xt1225 was fine , until some time ago.
Problem started there : I couldnt let it drain all the battery down or it would be a pain in the ass to charge it up.
If i let , the problem was that everytime i plug the charger in the phone would go up a second showing the charging screen and then turn off. The solution was to try to boot on bootloader or recovery and pray that it doesnt turn off, then the phone would charge a bit and back to the normal state.
The strange thing come here : one day after letting it go down to 1% (it didnt shut down but stayed at 1%), i plugged the charger in and the battery wouldnt go up past 1%. I let for hours and nothing . Then I managed to go on receovery (twrp 3.0.2) and :
The processor temp was something like 4293089048 C , the battery still 1%.
After some restarts on recovery i noticed that the battery would sometimes change a bit of the value , and i plugged the charger and managed to charge up battery to 100% in recovery only.
Now , after charging the phone a bit i decided to reflash the stock rom (was using aex) but i noticed that I can`t get my system recognized on usb. Neither on Bootloader , recovery , or system .
Anybody can help me =(?
Obs : Still have acess to system (with a custom rom , aex) , and i can flash things on recovery
douglasyc said:
My xt1225 was fine , until some time ago.
Problem started there : I couldnt let it drain all the battery down or it would be a pain in the ass to charge it up.
If i let , the problem was that everytime i plug the charger in the phone would go up a second showing the charging screen and then turn off. The solution was to try to boot on bootloader or recovery and pray that it doesnt turn off, then the phone would charge a bit and back to the normal state.
The strange thing come here : one day after letting it go down to 1% (it didnt shut down but stayed at 1%), i plugged the charger in and the battery wouldnt go up past 1%. I let for hours and nothing . Then I managed to go on receovery (twrp 3.0.2) and :
The processor temp was something like 4293089048 C , the battery still 1%.
After some restarts on recovery i noticed that the battery would sometimes change a bit of the value , and i plugged the charger and managed to charge up battery to 100% in recovery only.
Now , after charging the phone a bit i decided to reflash the stock rom (was using aex) but i noticed that I can`t get my system recognized on usb. Neither on Bootloader , recovery , or system .
Anybody can help me =(?
Obs : Still have acess to system (with a custom rom , aex) , and i can flash things on recovery
Click to expand...
Click to collapse
First of all, it seems like you have posted in the wrong section.
The XT1225 has a dedicated forum available here. So, the correct section for your thread should be here.
Secondly, it sounds like you're having a battery hardware issue. The battery is likely failing. If you can, you should replace it.
It might also be a USB Cable or USB connector issue. So, you should first change the USB Cable. If it doesn't help, change the battery. If that fails too, then you must ultimately change the USB connector (better take it to a repair center).
Before any of these, you can try to calibrate the battery with a calibration app, but I seriously doubt that will work. It's still worth the try!

must reboot or shutdown the phone before charging can run

can charge the phone if before rebooting or shutdown the phone
charge and cable is fine, so wht happen? is it phone related or something todo with rom,recovery or what? coz im already swtiching to many rom based on android 10-13
thanks

Categories

Resources